- 09 Jun, 2021 40 commits
-
-
Alex Elder authored
Pass the memory configuration data array to ipa_mem_valid() for validation, and use that rather than assuming it's already been recorded in the IPA structure. Move the memory data array size check into ipa_mem_valid(). Call ipa_mem_valid() early in ipa_mem_init(), and only proceed with assigning the memory array pointer and size if it is found to be valid. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Move the memory region validation check so it happens earlier when initializing the driver, at init time rather than config time (i.e., before access to hardware is required). Signed-off-by:
-
Alex Elder authored
The only thing done by ipa_mem_valid_one() that requires hardware access is the check for whether all regions fit within the size of IPA local memory specified by an IPA register. Introduce ipa_mem_size_valid() to implement this verification and stop doing so in ipa_mem_valid_one(). Call the new function from ipa_mem_config() (which is also the caller of ipa_mem_valid()). Signed-off-by:
-
Alex Elder authored
Currently, memory regions are validated in the loop that initializes them. Instead, validate them separately. Rename ipa_mem_valid() to be ipa_mem_valid_one(). Define a *new* function named ipa_mem_valid() that performs validation of the array of memory regions provided. This function calls ipa_mem_valid_one() for each region in turn. Skip validation for any "empty" region descriptors, which have zero size and are not preceded by any canary values. Issue a warning for such descriptors if the offset is non-zero. Signed-off-by:
-
Alex Elder authored
Do memory region descriptor validation unconditionally, rather than having it depend on IPA_VALIDATION being defined. Pass the address of a memory region descriptor rather than a memory ID to ipa_mem_valid(). Signed-off-by:
-
Alex Elder authored
Store the memory region ID in the memory descriptor structure. This is a move toward *not* indexing the array by the ID, but for now we must still specify those index values. Define an explicitly undefined region ID, value 0, so uninitialized entries in the array won't use an otherwise valid ID. Signed-off-by:
-
Alex Elder authored
Define a new pseudo memory region identifer that specifies the offset at the end of IPA resident memory. Use it instead of IPA_MEM_UC_EVENT_RING in places where the size of that region was defined to be 0. The size of the IPA_MEM_END_MARKER pseudo region must be zero. Signed-off-by:
-
Colin Ian King authored
The return code variable rc is being set to return error values in two places in sja1105_mdiobus_base_tx_register and yet it is not being returned, the function always returns 0 instead. Fix this by replacing the return 0 with the return code rc. Addresses-Coverity: ("Unused value") Fixes: 5a8f0974 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Matteo Croce authored
To support XDP, a headroom is prepended to the packet data. Consider this offset when doing a prefetch. Fixes: da5ec7f2 ("net: stmmac: refactor stmmac_init_rx_buffers for stmmac_reinit_rx_buffers") Signed-off-by:
Matteo Croce <mcroce@microsoft.com> Signed-off-by:
-
Colin Ian King authored
The call to mlxsw_thermal_module_temp_and_thresholds_get passes a NULL pointer for the temperature and this can be dereferenced in this function if the mlxsw_reg_query call fails. The simplist fix is to pass the address of dummy temperature variable instead of a NULL pointer. Addresses-Coverity: ("Explicit null dereferenced") Fixes: 72a64c2f ("mlxsw: thermal: Read module temperature thresholds using MTMP register") Signed-off-by:Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Kristian Evensen authored
Commit e1d9a90a ("net: ethernet: rmnet: Support for ingress MAPv5 checksum offload") broke ingress handling for devices where RMNET_FLAGS_INGRESS_MAP_CKSUMV5 or RMNET_FLAGS_INGRESS_MAP_CKSUMV4 are not set. Unless either of these flags are set, the MAP header is not removed. This commit restores the original logic by ensuring that the MAP header is removed for all MAP packets. Fixes: e1d9a90a ("net: ethernet: rmnet: Support for ingress MAPv5 checksum offload") Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by:
-
Wei Yongjun authored
The sparse tool complains as follows: drivers/net/ethernet/amazon/ena/ena_netdev.c:978:13: warning: symbol 'ena_alloc_map_page' was not declared. Should it be static? This symbol is not used outside of ena_netdev.c, so marks it static. Fixes: 947c54c3 ("net: ena: Use dev_alloc() in RX buffer allocation") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Colin Ian King authored
The comparisons of the u16 values priv->phycr1 and priv->phycr2 to less than zero always false because they are unsigned. Fix this by using an int for the assignment and less than zero check. Addresses-Coverity: ("Unsigned compared against 0") Fixes: 0a4355c2 ("net: phy: realtek: add dt property to disable CLKOUT clock") Fixes: d90db36a ("net: phy: realtek: add dt property to enable ALDPS mode") Signed-off-by: -
Colin Ian King authored
There are missing { } around a block of code on an if statement. Fix this by adding them in. Addresses-Coverity: ("Nesting level does not match indentation") Fixes: 46682cb8 ("net: stmmac: enable Intel mGbE 2.5Gbps link speed") Signed-off-by: -
Yang Yingliang authored
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
David S. Miller authored
Matteo Croce says: ==================== mvpp2: prefetch data early These two patches prefetch some data from RAM so to reduce stall and speedup the packet processing. ==================== Signed-off-by: -
Matteo Croce authored
Most of the time during the RX is caused by the compound_head() call done at the end of the RX loop: │ build_skb(): [...] │ static inline struct page *compound_head(struct page *page) │ { │ unsigned long head = READ_ONCE(page->compound_head); 65.23 │ ldr x2, [x1, #8] Prefetch the page struct as soon as possible, to speedup the RX path noticeabily by a ~3-4% packet rate in a drop test. │ build_skb(): [...] │ static inline struct page *compound_head(struct page *page) │ { │ unsigned long head = READ_ONCE(page->compound_head); 17.92 │ ldr x2, [x1, #8] Signed-off-by: -
Matteo Croce authored
In the RX buffer, the received data starts after a headroom used to align the IP header and to allow prepending headers efficiently. The prefetch() should take this into account, and prefetch from the very start of the received data. We can see that ether_addr_equal_64bits(), which is the first function to access the data, drops from the top of the perf top output. prefetch(data): Overhead Shared Object Symbol 11.64% [kernel] [k] eth_type_trans prefetch(data + MVPP2_MH_SIZE + MVPP2_SKB_HEADROOM): Overhead Shared Object Symbol 13.42% [kernel] [k] build_skb 10.35% [mvpp2] [k] mvpp2_rx 9.35% [kernel] [k] __netif_receive_skb_core 8.24% [kernel] [k] kmem_cache_free 7.97% [kernel] [k] dev_gro_receive 7.68% [kernel] [k] page_pool_put_page 7.32% [kernel] [k] kmem_cache_alloc 7.09% [mvpp2] [k] mvpp2_bm_pool_put 3.36% [kernel] [k] eth_type_trans Also, move the eth_type_trans() call a bit down, to give the RAM more time to prefetch the data. Signed-off-by:
-
Yang Yingliang authored
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by:
-
Yang Yingliang authored
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by:
-
Yang Yingliang authored
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by:
-
Shai Malin authored
This reverts commits: - 76241154 nvme: NVME_TCP_OFFLOAD should not default to m - 5ff5622e: Merge branch 'NVMeTCP-Offload-ULP' As requested on the mailing-list: https://lore.kernel.org/netdev/SJ0PR18MB3882C20793EA35A3E8DAE300CC379@SJ0PR18MB3882.namprd18.prod.outlook.com/ This patch will revert the nvme-tcp-offload ULP from net-next. The nvme-tcp-offload ULP series will continue to be considered only on linux-nvme@lists.infradead.org. Signed-off-by:
Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by:
Michal Kalderon <mkalderon@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
Shai Malin <smalin@marvell.com> Signed-off-by:
-
Colin Ian King authored
The comparison of the u16 priv->phy_addr < 0 is always false because phy_addr is unsigned. Fix this by assigning the return from the call to function asix_read_phy_addr to int ret and using this for the less than zero error check comparison. Fixes: 7e88b11a ("net: usb: asix: refactor asix_read_phy_addr() and handle errors on return") Addresses-Coverity: ("Unsigned compared against 0") Signed-off-by:
-
Colin Ian King authored
The comparison of the u16 priv->phy_addr < 0 is always false because phy_addr is unsigned. Fix this by assigning the return from the call to function asix_read_phy_addr to int ret and using this for the less than zero error check comparison. Addresses-Coverity: ("Unsigned compared against 0") Fixes: e532a096 ("net: usb: asix: ax88772: add phylib support") Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Add nfgenmsg field to nfnetlink's struct nfnl_info and use it. 2) Remove nft_ctx_init_from_elemattr() and nft_ctx_init_from_setattr() helper functions. 3) Add the nf_ct_pernet() helper function to fetch the conntrack pernetns data area. 4) Expose TCP and UDP flowtable offload timeouts through sysctl, from Oz Shlomo. 5) Add nfnetlink_hook subsystem to fetch the netfilter hook pipeline configuration, from Florian Westphal. This also includes a new field to annotate the hook type as metadata. 6) Fix unsafe memory access to non-linear skbuff in the new SCTP chunk support for nft_exthdr, from Phil Sutter. ==================== Signed-off-by: -
Dan Carpenter authored
In normal situations where the driver doesn't dereference "nsim_node->ddir" or "nsim_node->rate_parent" itself then we are not supposed to check the return from debugfs functions. In the case of debugfs_create_dir() the check was wrong as well because it doesn't return NULL, it returns error pointers. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The WARN_ON() macro takes a condition, it doesn't take a message. Use WARN() instead. Fixes: 1897db2e ("devlink: Allow setting tx rate for devlink rate leaf objects") Signed-off-by:
-
Dan Carpenter authored
This code check "reg" but "ret" was intended so the error handling will never trigger. Fixes: 7c9896e3 ("net: dsa: qca8k: check return value of read functions correctly") Signed-off-by:
-
Dan Carpenter authored
The "hi" variable is a u64 but the qca8k_read() writes to the top 32 bits of it. That will work on little endian systems but it's a bit subtle. It's cleaner to make declare "hi" as a u32. We will still need to cast it when we shift it later on in the function but that's fine. Fixes: 7c9896e3 ("net: dsa: qca8k: check return value of read functions correctly") Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== net: lapbether: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: -
Peng Li authored
According to the chackpatch.pl, line length of 123 exceeds 100 columns, so fix it. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Peng Li authored
Alignment should match open parenthesis. Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, comparison to NULL could be written "lapbeth_get_x25_dev". Signed-off-by:
-
Peng Li authored
Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
This patch removes unnecessary out of memory message, to fix the following checkpatch.pl warning: "WARNING: Possible unnecessary 'out of memory' message" Signed-off-by:
-
Peng Li authored
This patch removes trailing whitespaces. Signed-off-by:
-
Peng Li authored
Should not use assignment in if condition. Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
This patch the redundant blank line. Signed-off-by:
-
Baokun Li authored
Using list_move_tail() instead of list_del() + list_add_tail() in hclge_main.c. Reported-by:
Baokun Li <libaokun1@huawei.com> Signed-off-by:
-
