- 05 Apr, 2019 40 commits
-
-
Sedat Dilek authored
[ Upstream commit 8beb90aa ] commit 1917d42d ("fcoe: use enum for fip_mode") introduces a separate enum for the fip_mode that shall be used during initialisation handling until it is passed to fcoe_ctrl_link_up to set the initial fip_state. That change was incomplete and gcc quietly converted in various places between the fip_mode and the fip_state enum values with implicit enum conversions, which fortunately cannot cause any issues in the actual code's execution. clang however warns about these implicit enum conversions in the scsi drivers. This commit consolidates the use of the two enums, guided by clang's enum-conversion warnings. This commit now completes the use of the fip_mode: It expects and uses fip_mode in {bnx2fc,fcoe}_interface_create and fcoe_ctlr_init, and it calls fcoe_ctrl_set_set() with the correct values in fcoe_ctlr_link_up(). It also breaks the association between FIP_MODE_AUTO and FIP_ST_AUTO to indicate these two enums are distinct. Link: https://github.com/ClangBuiltLinux/linux/issues/151 Fixes: 1917d42d ("fcoe: use enum for fip_mode") Reported-by:
Dmitry Golovin <dima@golovin.in> Original-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> CC: Lukas Bulwahn <lukas.bulwahn@gmail.com> CC: Nick Desaulniers <ndesaulniers@google.com> CC: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Tested-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jason Yan authored
[ Upstream commit bcf3b67d ] when create DMA pool for cmd frames failed, we should return -ENOMEM, instead of 0. In some case in: megasas_init_adapter_fusion() -->megasas_alloc_cmds() -->megasas_create_frame_pool create DMA pool failed, --> megasas_free_cmds() [1] -->megasas_alloc_cmds_fusion() failed, then goto fail_alloc_cmds. -->megasas_free_cmds() [2] we will call megasas_free_cmds twice, [1] will kfree cmd_list, [2] will use cmd_list.it will cause a problem: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc000f70000 [00000000] *pgd=0000001fbf893003, *pud=0000001fbf893003, *pmd=0000001fbf894003, *pte=006000006d000707 Internal error: Oops: 96000005 [#1] SMP Modules linked in: CPU: 18 PID: 1 Comm: swapper/0 Not tainted task: ffffffdfb9290000 ti: ffffffdfb923c000 task.ti: ffffffdfb923c000 PC is at megasas_free_cmds+0x30/0x70 LR is at megasas_free_cmds+0x24/0x70 ... Call trace: [<ffffffc0005b779c>] megasas_free_cmds+0x30/0x70 [<ffffffc0005bca74>] megasas_init_adapter_fusion+0x2f4/0x4d8 [<ffffffc0005b926c>] megasas_init_fw+0x2dc/0x760 [<ffffffc0005b9ab0>] megasas_probe_one+0x3c0/0xcd8 [<ffffffc0004a5abc>] local_pci_probe+0x4c/0xb4 [<ffffffc0004a5c40>] pci_device_probe+0x11c/0x14c [<ffffffc00053a5e4>] driver_probe_device+0x1ec/0x430 [<ffffffc00053a92c>] __driver_attach+0xa8/0xb0 [<ffffffc000538178>] bus_for_each_dev+0x74/0xc8 [<ffffffc000539e88>] driver_attach+0x28/0x34 [<ffffffc000539a18>] bus_add_driver+0x16c/0x248 [<ffffffc00053b234>] driver_register+0x6c/0x138 [<ffffffc0004a5350>] __pci_register_driver+0x5c/0x6c [<ffffffc000ce3868>] megasas_init+0xc0/0x1a8 [<ffffffc000082a58>] do_one_initcall+0xe8/0x1ec [<ffffffc000ca7be8>] kernel_init_freeable+0x1c8/0x284 [<ffffffc0008d90b8>] kernel_init+0x1c/0xe4 Signed-off-by:
Jason Yan <yanaijie@huawei.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Sebastian Ott authored
[ Upstream commit 0ff06c44 ] Prior to dma unmap/free operations the ism driver tries to ensure that the memory is no longer accessed by the HW. When errors during deregistration of memory regions from the HW occur the ism driver will not unmap/free this memory. When we receive notification from the hypervisor that a PCI function has been detached we can no longer access the device and would never unmap/free these memory regions which led to complaints by the DMA debug API. Treat this kind of errors during the deregistration of memory regions from the HW as success since it is already ensured that the memory is no longer accessed by HW. Reported-by:
Karsten Graul <kgraul@linux.ibm.com> Reported-by:
Hans Wippel <hwippel@linux.ibm.com> Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit 45b14a4f ] When checking a generic status block, we iterate over all the generic data blocks. The loop condition only checks that the start of the generic data block is valid (within estatus->data_length) but not the whole block. Because the size of data blocks (excluding error data) may vary depending on the revision and the revision is contained within the data block, ensure that enough of the current data block is valid before dereferencing any members otherwise an out-of-bounds access may occur if estatus->data_length is invalid. This relies on the fact that struct acpi_hest_generic_data_v300 is a superset of the earlier version. Also rework the other checks to avoid potential underflow. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by:
Borislav Petkov <bp@suse.de> Tested-by:
Tyler Baicar <baicar.tyler@gmail.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Erwan Velu authored
[ Upstream commit 1222d527 ] There is some rare cases where CPB (and possibly IDA) are missing on processors. This is the case fixed by commit f7f3dc00 ("x86/cpu/AMD: Fix erratum 1076 (CPB bit)") and following. In such context, the boost status isn't reported by /sys/devices/system/cpu/cpufreq/boost. This commit is about printing a message to report that the CPU doesn't expose the boost capabilities. This message could help debugging platforms hit by this phenomena. Signed-off-by:
Erwan Velu <e.velu@criteo.com> [ rjw: Change the message text somewhat ] Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 70b77321 ] Although qcom_snd_parse_of() tries to manage the of-node refcount, there are still a few places that lead to the unblanced refcount in the error code path. Namely, - for_each_child_of_node() needs to unreference the iterator node if aborting the loop in the middle, - cpu, codec and platform node objects have to be unreferenced at each iteration, - platform and codec node objects have to be referred before jumping to the error handling code that unreference them unconditionally. This patch tries to address these by moving the assignment of platform and codec node objects to the beginning of the loop and adding the of_node_put() calls adequately. Fixes: c25e295c ("ASoC: qcom: Add support to parse common audio device nodes") Cc: Patrick Lai <plai@codeaurora.org> Cc: Banajit Goswami <bgoswami@codeaurora.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Wei Li authored
[ Upstream commit 11db1ad4 ] The output of "perf annotate -l --stdio xxx" changed since commit 425859ff ("perf annotate: No need to calculate notes->start twice") removed notes->start assignment in symbol__calc_lines(). It will get failed in find_address_in_section() from symbol__tty_annotate() subroutine as the a2l->addr is wrong. So the annotate summary doesn't report the line number of source code correctly. Before fix: liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ cat common_while_1.c void hotspot_1(void) { volatile int i; for (i = 0; i < 0x10000000; i++); for (i = 0; i < 0x10000000; i++); for (i = 0; i < 0x10000000; i++); } int main(void) { hotspot_1(); return 0; } liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ gcc common_while_1.c -g -o common_while_1 liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf record ./common_while_1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.488 MB perf.data (12498 samples) ] liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf annotate -l -s hotspot_1 --stdio Sorted summary for file /home/liwei/main_code/hulk_work/hulk/tools/perf/common_while_1 ---------------------------------------------- 19.30 common_while_1[32] 19.03 common_while_1[4e] 19.01 common_while_1[16] 5.04 common_while_1[13] 4.99 common_while_1[4b] 4.78 common_while_1[2c] 4.77 common_while_1[10] 4.66 common_while_1[2f] 4.59 common_while_1[51] 4.59 common_while_1[35] 4.52 common_while_1[19] 4.20 common_while_1[56] 0.51 common_while_1[48] Percent | Source code & Disassembly of common_while_1 for cycles:ppp (12480 samples, percent: local period) ----------------------------------------------------------------------------------------------------------------- : : : : Disassembly of section .text: : : 00000000000005fa <hotspot_1>: : hotspot_1(): : void hotspot_1(void) : { 0.00 : 5fa: push %rbp 0.00 : 5fb: mov %rsp,%rbp : volatile int i; : : for (i = 0; i < 0x10000000; i++); 0.00 : 5fe: movl $0x0,-0x4(%rbp) 0.00 : 605: jmp 610 <hotspot_1+0x16> 0.00 : 607: mov -0x4(%rbp),%eax common_while_1[10] 4.77 : 60a: add $0x1,%eax common_while_1[13] 5.04 : 60d: mov %eax,-0x4(%rbp) common_while_1[16] 19.01 : 610: mov -0x4(%rbp),%eax common_while_1[19] 4.52 : 613: cmp $0xfffffff,%eax 0.00 : 618: jle 607 <hotspot_1+0xd> : for (i = 0; i < 0x10000000; i++); ... After fix: liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf record ./common_while_1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.488 MB perf.data (12500 samples) ] liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf annotate -l -s hotspot_1 --stdio Sorted summary for file /home/liwei/main_code/hulk_work/hulk/tools/perf/common_while_1 ---------------------------------------------- 33.34 common_while_1.c:5 33.34 common_while_1.c:6 33.32 common_while_1.c:7 Percent | Source code & Disassembly of common_while_1 for cycles:ppp (12482 samples, percent: local period) ----------------------------------------------------------------------------------------------------------------- : : : : Disassembly of section .text: : : 00000000000005fa <hotspot_1>: : hotspot_1(): : void hotspot_1(void) : { 0.00 : 5fa: push %rbp 0.00 : 5fb: mov %rsp,%rbp : volatile int i; : : for (i = 0; i < 0x10000000; i++); 0.00 : 5fe: movl $0x0,-0x4(%rbp) 0.00 : 605: jmp 610 <hotspot_1+0x16> 0.00 : 607: mov -0x4(%rbp),%eax common_while_1.c:5 4.70 : 60a: add $0x1,%eax 4.89 : 60d: mov %eax,-0x4(%rbp) common_while_1.c:5 19.03 : 610: mov -0x4(%rbp),%eax common_while_1.c:5 4.72 : 613: cmp $0xfffffff,%eax 0.00 : 618: jle 607 <hotspot_1+0xd> : for (i = 0; i < 0x10000000; i++); 0.00 : 61a: movl $0x0,-0x4(%rbp) 0.00 : 621: jmp 62c <hotspot_1+0x32> 0.00 : 623: mov -0x4(%rbp),%eax common_while_1.c:6 4.54 : 626: add $0x1,%eax 4.73 : 629: mov %eax,-0x4(%rbp) common_while_1.c:6 19.54 : 62c: mov -0x4(%rbp),%eax common_while_1.c:6 4.54 : 62f: cmp $0xfffffff,%eax ... Signed-off-by:
Wei Li <liwei391@huawei.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 425859ff ("perf annotate: No need to calculate notes->start twice") Link: http://lkml.kernel.org/r/20190221095716.39529-1-liwei391@huawei.comSigned-off-by:
-
Katsuhiro Suzuki authored
[ Upstream commit d13501a2 ] Custom approximation of fractional-divider may not need parent clock rate checking. For example Rockchip SoCs work fine using grand parent clock rate even if target rate is greater than parent. This patch checks parent clock rate only if CLK_SET_RATE_PARENT flag is set. For detailed example, clock tree of Rockchip I2S audio hardware. - Clock rate of CPLL is 1.2GHz, GPLL is 491.52MHz. - i2s1_div is integer divider can divide N (N is 1~128). Input clock is CPLL or GPLL. Initial divider value is N = 1. Ex) PLL = CPLL, N = 10, i2s1_div output rate is CPLL / 10 = 1.2GHz / 10 = 120MHz - i2s1_frac is fractional divider can divide input to x/y, x and y are 16bit integer. CPLL --> | selector | ---> i2s1_div -+--> | selector | --> I2S1 MCLK GPLL --> | | ,--------------' | | `--> i2s1_frac ---> | | Clock mux system try to choose suitable one from i2s1_div and i2s1_frac for master clock (MCLK) of I2S1. Bad scenario as follows: - Try to set MCLK to 8.192MHz (32kHz audio replay) Candidate setting is - i2s1_div: GPLL / 60 = 8.192MHz i2s1_div candidate is exactly same as target clock rate, so mux choose this clock source. i2s1_div output rate is changed 491.52MHz -> 8.192MHz - After that try to set to 11.2896MHz (44.1kHz audio replay) Candidate settings are - i2s1_div : CPLL / 107 = 11.214945MHz - i2s1_frac: i2s1_div = 8.192MHz This is because clk_fd_round_rate() thinks target rate (11.2896MHz) is higher than parent rate (i2s1_div = 8.192MHz) and returns parent clock rate. Above is current upstreamed behavior. Clock mux system choose i2s1_div, but this clock rate is not acceptable for I2S driver, so users cannot replay audio. Expected behavior is: - Try to set master clock to 11.2896MHz (44.1kHz audio replay) Candidate settings are - i2s1_div : CPLL / 107 = 11.214945MHz - i2s1_frac: i2s1_div * 147/6400 = 11.2896MHz Change i2s1_div to GPLL / 1 = 491.52MHz at same time. If apply this commit, clk_fd_round_rate() calls custom approximate function of Rockchip even if target rate is higher than parent. Custom function changes both grand parent (i2s1_div) and parent (i2s_frac) settings at same time. Clock mux system can choose i2s1_frac and audio works fine. Signed-off-by:
Katsuhiro Suzuki <katsuhiro@katsuster.net> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> [sboyd@kernel.org: Make function into a macro instead] Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Håkon Bugge authored
[ Upstream commit 2612d723 ] Using CX-3 virtual functions, either from a bare-metal machine or pass-through from a VM, MAD packets are proxied through the PF driver. Since the VF drivers have separate name spaces for MAD Transaction Ids (TIDs), the PF driver has to re-map the TIDs and keep the book keeping in a cache. Following the RDMA Connection Manager (CM) protocol, it is clear when an entry has to evicted form the cache. But life is not perfect, remote peers may die or be rebooted. Hence, it's a timeout to wipe out a cache entry, when the PF driver assumes the remote peer has gone. During workloads where a high number of QPs are destroyed concurrently, excessive amount of CM DREQ retries has been observed The problem can be demonstrated in a bare-metal environment, where two nodes have instantiated 8 VFs each. This using dual ported HCAs, so we have 16 vPorts per physical server. 64 processes are associated with each vPort and creates and destroys one QP for each of the remote 64 processes. That is, 1024 QPs per vPort, all in all 16K QPs. The QPs are created/destroyed using the CM. When tearing down these 16K QPs, excessive CM DREQ retries (and duplicates) are observed. With some cat/paste/awk wizardry on the infiniband_cm sysfs, we observe as sum of the 16 vPorts on one of the nodes: cm_rx_duplicates: dreq 2102 cm_rx_msgs: drep 1989 dreq 6195 rep 3968 req 4224 rtu 4224 cm_tx_msgs: drep 4093 dreq 27568 rep 4224 req 3968 rtu 3968 cm_tx_retries: dreq 23469 Note that the active/passive side is equally distributed between the two nodes. Enabling pr_debug in cm.c gives tons of: [171778.814239] <mlx4_ib> mlx4_ib_multiplex_cm_handler: id{slave: 1,sl_cm_id: 0xd393089f} is NULL! By increasing the CM_CLEANUP_CACHE_TIMEOUT from 5 to 30 seconds, the tear-down phase of the application is reduced from approximately 90 to 50 seconds. Retries/duplicates are also significantly reduced: cm_rx_duplicates: dreq 2460 [] cm_tx_retries: dreq 3010 req 47 Increasing the timeout further didn't help, as these duplicates and retries stems from a too short CMA timeout, which was 20 (~4 seconds) on the systems. By increasing the CMA timeout to 22 (~17 seconds), the numbers fell down to about 10 for both of them. Adjustment of the CMA timeout is not part of this commit. Signed-off-by:
Håkon Bugge <haakon.bugge@oracle.com> Acked-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Dongli Zhang authored
[ Upstream commit 758a58d0 ] Commit 0da03cab ("loop: Fix deadlock when calling blkdev_reread_part()") moves blkdev_reread_part() out of the loop_ctl_mutex. However, GENHD_FL_NO_PART_SCAN is set before __blkdev_reread_part(). As a result, __blkdev_reread_part() will fail the check of GENHD_FL_NO_PART_SCAN and will not rescan the loop device to delete all partitions. Below are steps to reproduce the issue: step1 # dd if=/dev/zero of=tmp.raw bs=1M count=100 step2 # losetup -P /dev/loop0 tmp.raw step3 # parted /dev/loop0 mklabel gpt step4 # parted -a none -s /dev/loop0 mkpart primary 64s 1 step5 # losetup -d /dev/loop0 Step5 will not be able to delete /dev/loop0p1 (introduced by step4) and there is below kernel warning message: [ 464.414043] __loop_clr_fd: partition scan of loop0 failed (rc=-22) This patch sets GENHD_FL_NO_PART_SCAN after blkdev_reread_part(). Fixes: 0da03cab ("loop: Fix deadlock when calling blkdev_reread_part()") Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Vadim Pasternak authored
[ Upstream commit e4c275f7 ] Fix the following KASAN warning produced when booting a 64-bit kernel: [ 13.334750] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70 [ 13.342166] Read of size 8 at addr ffff880235067178 by task kworker/2:1/42 [ 13.342176] CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 4.20.0-rc1+ #106 [ 13.342179] Hardware name: Mellanox Technologies Ltd. MSN2740/Mellanox x86 SFF board, BIOS 5.6.5 06/07/2016 [ 13.342190] Workqueue: events deferred_probe_work_func [ 13.342194] Call Trace: [ 13.342206] dump_stack+0xc7/0x15b [ 13.342214] ? show_regs_print_info+0x5/0x5 [ 13.342220] ? kmsg_dump_rewind_nolock+0x59/0x59 [ 13.342234] ? _raw_write_lock_irqsave+0x100/0x100 [ 13.351593] print_address_description+0x73/0x260 [ 13.351603] kasan_report+0x260/0x380 [ 13.351611] ? find_first_bit+0x19/0x70 [ 13.351619] find_first_bit+0x19/0x70 [ 13.351630] mlxreg_hotplug_work_handler+0x73c/0x920 [mlxreg_hotplug] [ 13.351639] ? __lock_text_start+0x8/0x8 [ 13.351646] ? _raw_write_lock_irqsave+0x80/0x100 [ 13.351656] ? mlxreg_hotplug_remove+0x1e0/0x1e0 [mlxreg_hotplug] [ 13.351663] ? regmap_volatile+0x40/0xb0 [ 13.351668] ? regcache_write+0x4c/0x90 [ 13.351676] ? mlxplat_mlxcpld_reg_write+0x24/0x30 [mlx_platform] [ 13.351681] ? _regmap_write+0xea/0x220 [ 13.351688] ? __mutex_lock_slowpath+0x10/0x10 [ 13.351696] ? devm_add_action+0x70/0x70 [ 13.351701] ? mutex_unlock+0x1d/0x40 [ 13.351710] mlxreg_hotplug_probe+0x82e/0x989 [mlxreg_hotplug] [ 13.351723] ? mlxreg_hotplug_work_handler+0x920/0x920 [mlxreg_hotplug] [ 13.351731] ? sysfs_do_create_link_sd.isra.2+0xf4/0x190 [ 13.351737] ? sysfs_rename_link_ns+0xf0/0xf0 [ 13.351743] ? devres_close_group+0x2b0/0x2b0 [ 13.351749] ? pinctrl_put+0x20/0x20 [ 13.351755] ? acpi_dev_pm_attach+0x2c/0xd0 [ 13.351763] platform_drv_probe+0x70/0xd0 [ 13.351771] really_probe+0x480/0x6e0 [ 13.351778] ? device_attach+0x10/0x10 [ 13.351784] ? __lock_text_start+0x8/0x8 [ 13.351790] ? _raw_write_lock_irqsave+0x80/0x100 [ 13.351797] ? _raw_write_lock_irqsave+0x80/0x100 [ 13.351806] ? __driver_attach+0x190/0x190 [ 13.351812] driver_probe_device+0x17d/0x1a0 [ 13.351819] ? __driver_attach+0x190/0x190 [ 13.351825] bus_for_each_drv+0xd6/0x130 [ 13.351831] ? bus_rescan_devices+0x20/0x20 [ 13.351837] ? __mutex_lock_slowpath+0x10/0x10 [ 13.351845] __device_attach+0x18c/0x230 [ 13.351852] ? device_bind_driver+0x70/0x70 [ 13.351859] ? __mutex_lock_slowpath+0x10/0x10 [ 13.351866] bus_probe_device+0xea/0x110 [ 13.351874] deferred_probe_work_func+0x1c9/0x290 [ 13.351882] ? driver_deferred_probe_add+0x1d0/0x1d0 [ 13.351889] ? preempt_notifier_dec+0x20/0x20 [ 13.351897] ? read_word_at_a_time+0xe/0x20 [ 13.351904] ? strscpy+0x151/0x290 [ 13.351912] ? set_work_pool_and_clear_pending+0x9c/0xf0 [ 13.351918] ? __switch_to_asm+0x34/0x70 [ 13.351924] ? __switch_to_asm+0x40/0x70 [ 13.351929] ? __switch_to_asm+0x34/0x70 [ 13.351935] ? __switch_to_asm+0x40/0x70 [ 13.351942] process_one_work+0x5cc/0xa00 [ 13.351952] ? pwq_dec_nr_in_flight+0x1e0/0x1e0 [ 13.351960] ? pci_mmcfg_check_reserved+0x80/0xb8 [ 13.351967] ? run_rebalance_domains+0x250/0x250 [ 13.351980] ? stack_access_ok+0x35/0x80 [ 13.351986] ? deref_stack_reg+0xa1/0xe0 [ 13.351994] ? schedule+0xcd/0x250 [ 13.352000] ? worker_enter_idle+0x2d6/0x330 [ 13.352006] ? __schedule+0xeb0/0xeb0 [ 13.352014] ? fork_usermode_blob+0x130/0x130 [ 13.352019] ? mutex_lock+0xa7/0x100 [ 13.352026] ? _raw_spin_lock_irq+0x98/0xf0 [ 13.352032] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 13.352037] i2c i2c-2: Added multiplexed i2c bus 11 [ 13.352043] worker_thread+0x181/0xa80 [ 13.352052] ? __switch_to_asm+0x34/0x70 [ 13.352058] ? __switch_to_asm+0x40/0x70 [ 13.352064] ? process_one_work+0xa00/0xa00 [ 13.352070] ? __switch_to_asm+0x34/0x70 [ 13.352076] ? __switch_to_asm+0x40/0x70 [ 13.352081] ? __switch_to_asm+0x34/0x70 [ 13.352086] ? __switch_to_asm+0x40/0x70 [ 13.352092] ? __switch_to_asm+0x34/0x70 [ 13.352097] ? __switch_to_asm+0x40/0x70 [ 13.352105] ? __schedule+0x3d6/0xeb0 [ 13.352112] ? migrate_swap_stop+0x470/0x470 [ 13.352119] ? save_stack+0x89/0xb0 [ 13.352127] ? kmem_cache_alloc_trace+0xe5/0x570 [ 13.352132] ? kthread+0x59/0x1d0 [ 13.352138] ? ret_from_fork+0x35/0x40 [ 13.352154] ? __schedule+0xeb0/0xeb0 [ 13.352161] ? remove_wait_queue+0x150/0x150 [ 13.352169] ? _raw_write_lock_irqsave+0x80/0x100 [ 13.352175] ? __lock_text_start+0x8/0x8 [ 13.352183] ? process_one_work+0xa00/0xa00 [ 13.352188] kthread+0x1a4/0x1d0 [ 13.352195] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 13.352202] ret_from_fork+0x35/0x40 [ 13.353879] The buggy address belongs to the page: [ 13.353885] page:ffffea0008d419c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 13.353890] flags: 0x2ffff8000000000() [ 13.353897] raw: 02ffff8000000000 ffffea0008d419c8 ffffea0008d419c8 0000000000000000 [ 13.353903] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 13.353905] page dumped because: kasan: bad access detected [ 13.353908] Memory state around the buggy address: [ 13.353912] ffff880235067000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 13.353917] ffff880235067080: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 [ 13.353921] >ffff880235067100: f2 f2 f2 f2 f2 f2 f2 04 f2 f2 f2 f2 f2 f2 f2 04 [ 13.353923] ^ [ 13.353927] ffff880235067180: f2 f2 f2 f2 f2 f2 f2 04 f2 f2 f2 00 00 00 00 00 [ 13.353931] ffff880235067200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 13.353933] ================================================================== The warning is caused by the below loop: for_each_set_bit(bit, (unsigned long *)&asserted, 8) { while "asserted" is declared as 'unsigned'. The casting of 32-bit unsigned integer pointer to a 64-bit unsigned long pointer. There are two problems here. It causes the access of four extra byte, which can corrupt memory The 32-bit pointer address may not be 64-bit aligned. The fix changes variable "asserted" to "unsigned long". Fixes: 1f976f69 ("platform/x86: Move Mellanox platform hotplug driver to platform/mellanox") Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by:
-
Yang Fan authored
[ Upstream commit 4d9b2864 ] Commit ae7c8cba ("platform/x86: ideapad-laptop: add lenovo RESCUER R720-15IKBN to no_hw_rfkill_list") added DMI_MATCH(DMI_BOARD_NAME, "80WW") for Lenovo RESCUER R720-15IKBN. But DMI_BOARD_NAME does not match 80WW on Lenovo RESCUER R720-15IKBN, thus cause Wireless LAN still be hard blocked. On Lenovo RESCUER R720-15IKBN: ~$ cat /sys/class/dmi/id/sys_vendor LENOVO ~$ cat /sys/class/dmi/id/board_name Provence-5R3 ~$ cat /sys/class/dmi/id/product_name 80WW ~$ cat /sys/class/dmi/id/product_version Lenovo R720-15IKBN So on Lenovo RESCUER R720-15IKBN: DMI_SYS_VENDOR should match "LENOVO", DMI_BOARD_NAME should match "Provence-5R3", DMI_PRODUCT_NAME should match "80WW", DMI_PRODUCT_VERSION should match "Lenovo R720-15IKBN". Fix it, and in according with other entries in no_hw_rfkill_list, use DMI_PRODUCT_VERSION instead of DMI_BOARD_NAME. Fixes: ae7c8cba ("platform/x86: ideapad-laptop: add lenovo RESCUER R720-15IKBN to no_hw_rfkill_list") Signed-off-by:
Yang Fan <nullptr.cpp@gmail.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit ab2c4e25 ] Give precision identifiers to the two snprintf() formatting the priority and TC strings to avoid producing these two warnings: drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_prio_strings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:37: warning: '%d' directive output may be truncated writing between 1 and 3 bytes into a region of size between 0 and 31 [-Wformat-truncation=] snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:3: note: 'snprintf' output between 3 and 36 bytes into a destination of size 32 snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlxsw_sp_port_hw_prio_stats[i].str, prio); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_tc_strings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:37: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 31 [-Wformat-truncation=] snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:3: note: 'snprintf' output between 3 and 44 bytes into a destination of size 32 snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlxsw_sp_port_hw_tc_stats[i].str, tc); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 135e7245 ] Provide precision hints to snprintf() since we know the destination buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the following warnings: drivers/net/ethernet/intel/e1000e/netdev.c: In function 'e1000_request_msix': drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-rx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->rx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->rx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-rx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-tx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->tx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->tx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-tx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
-
Andrew Lunn authored
[ Upstream commit f6d9758b ] The following false positive lockdep splat has been observed. ====================================================== WARNING: possible circular locking dependency detected 4.20.0+ #302 Not tainted ------------------------------------------------------ systemd-udevd/160 is trying to acquire lock: edea6080 (&chip->reg_lock){+.+.}, at: __setup_irq+0x640/0x704 but task is already holding lock: edff0340 (&desc->request_mutex){+.+.}, at: __setup_irq+0xa0/0x704 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&desc->request_mutex){+.+.}: mutex_lock_nested+0x1c/0x24 __setup_irq+0xa0/0x704 request_threaded_irq+0xd0/0x150 mv88e6xxx_probe+0x41c/0x694 [mv88e6xxx] mdio_probe+0x2c/0x54 really_probe+0x200/0x2c4 driver_probe_device+0x5c/0x174 __driver_attach+0xd8/0xdc bus_for_each_dev+0x58/0x7c bus_add_driver+0xe4/0x1f0 driver_register+0x7c/0x110 mdio_driver_register+0x24/0x58 do_one_initcall+0x74/0x2e8 do_init_module+0x60/0x1d0 load_module+0x1968/0x1ff4 sys_finit_module+0x8c/0x98 ret_fast_syscall+0x0/0x28 0xbedf2ae8 -> #0 (&chip->reg_lock){+.+.}: __mutex_lock+0x50/0x8b8 mutex_lock_nested+0x1c/0x24 __setup_irq+0x640/0x704 request_threaded_irq+0xd0/0x150 mv88e6xxx_g2_irq_setup+0xcc/0x1b4 [mv88e6xxx] mv88e6xxx_probe+0x44c/0x694 [mv88e6xxx] mdio_probe+0x2c/0x54 really_probe+0x200/0x2c4 driver_probe_device+0x5c/0x174 __driver_attach+0xd8/0xdc bus_for_each_dev+0x58/0x7c bus_add_driver+0xe4/0x1f0 driver_register+0x7c/0x110 mdio_driver_register+0x24/0x58 do_one_initcall+0x74/0x2e8 do_init_module+0x60/0x1d0 load_module+0x1968/0x1ff4 sys_finit_module+0x8c/0x98 ret_fast_syscall+0x0/0x28 0xbedf2ae8 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&desc->request_mutex); lock(&chip->reg_lock); lock(&desc->request_mutex); lock(&chip->reg_lock); &desc->request_mutex refer to two different mutex. #1 is the GPIO for the chip interrupt. #2 is the chained interrupt between global 1 and global 2. Add lockdep classes to the GPIO interrupt to avoid this. Reported-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit a6327b5e ] When running OMAP1 kernel on QEMU, MMC access is annoyingly noisy: MMC: CTO of 0xff and 0xfe cannot be used! MMC: CTO of 0xff and 0xfe cannot be used! MMC: CTO of 0xff and 0xfe cannot be used! [ad inf.] Emulator warnings appear to be valid. The TI document SPRU680 [1] ("OMAP5910 Dual-Core Processor MultiMedia Card/Secure Data Memory Card (MMC/SD) Reference Guide") page 36 states that the maximum timeout is 253 cycles and "0xff and 0xfe cannot be used". Fix by using 0xfd as the maximum timeout. Tested using QEMU 2.5 (Siemens SX1 machine, OMAP310), and also checked on real hardware using Palm TE (OMAP310), Nokia 770 (OMAP1710) and Nokia N810 (OMAP2420) that MMC works as before. [1] http://www.ti.com/lit/ug/spru680/spru680.pdf Fixes: 730c9b7e ("[MMC] Add OMAP MMC host driver") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit f5fef459 ] [BUG] Btrfs qgroup will still hit EDQUOT under the following case: $ dev=/dev/test/test $ mnt=/mnt/btrfs $ umount $mnt &> /dev/null $ umount $dev &> /dev/null $ mkfs.btrfs -f $dev $ mount $dev $mnt -o nospace_cache $ btrfs subv create $mnt/subv $ btrfs quota enable $mnt $ btrfs quota rescan -w $mnt $ btrfs qgroup limit -e 1G $mnt/subv $ fallocate -l 900M $mnt/subv/padding $ sync $ rm $mnt/subv/padding # Hit EDQUOT $ xfs_io -f -c "pwrite 0 512M" $mnt/subv/real_file [CAUSE] Since commit a514d638 ("btrfs: qgroup: Commit transaction in advance to reduce early EDQUOT"), btrfs is not forced to commit transaction to reclaim more quota space. Instead, we just check pertrans metadata reservation against some threshold and try to do asynchronously transaction commit. However in above case, the pertrans metadata reservation is pretty small thus it will never trigger asynchronous transaction commit. [FIX] Instead of only accounting pertrans metadata reservation, we calculate how much free space we have, and if there isn't much free space left, commit transaction asynchronously to try to free some space. This may slow down the fs when we have less than 32M free qgroup space, but should reduce a lot of false EDQUOT, so the cost should be acceptable. Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Aneesh Kumar K.V authored
[ Upstream commit 5330367f ] After we ALIGN up the address we need to make sure we didn't overflow and resulted in zero address. In that case, we need to make sure that the returned address is greater than mmap_min_addr. This fixes selftest va_128TBswitch --run-hugetlb reporting failures when run as non root user for mmap(-1, MAP_HUGETLB) The bug is that a non-root user requesting address -1 will be given address 0 which will then fail, whereas they should have been given something else that would have succeeded. We also avoid the first mmap(-1, MAP_HUGETLB) returning NULL address as mmap address with this change. So we think this is not a security issue, because it only affects whether we choose an address below mmap_min_addr, not whether we actually allow that address to be mapped. ie. there are existing capability checks to prevent a user mapping below mmap_min_addr and those will still be honoured even without this fix. Fixes: 48483760 ("powerpc/mm: Add radix support for hugetlb") Reviewed-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Nicolas Boichat authored
[ Upstream commit 032ebd85 ] L1 tables are allocated with __get_dma_pages, and therefore already ignored by kmemleak. Without this, the kernel would print this error message on boot, when the first L1 table is allocated: [ 2.810533] kmemleak: Trying to color unknown object at 0xffffffd652388000 as Black [ 2.818190] CPU: 5 PID: 39 Comm: kworker/5:0 Tainted: G S 4.19.16 #8 [ 2.831227] Workqueue: events deferred_probe_work_func [ 2.836353] Call trace: ... [ 2.852532] paint_ptr+0xa0/0xa8 [ 2.855750] kmemleak_ignore+0x38/0x6c [ 2.859490] __arm_v7s_alloc_table+0x168/0x1f4 [ 2.863922] arm_v7s_alloc_pgtable+0x114/0x17c [ 2.868354] alloc_io_pgtable_ops+0x3c/0x78 ... Fixes: e5fc9753 ("iommu/io-pgtable: Add ARMv7 short descriptor support") Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
[ Upstream commit 74ffe79a ] Mostly unwind is done with irqs enabled however SLUB may call it with irqs disabled while creating a new SLUB cache. I had system freeze while loading a module which called kmem_cache_create() on init. That means SLUB's __slab_alloc() disabled interrupts and then ->new_slab_objects() ->new_slab() ->setup_object() ->setup_object_debug() ->init_tracking() ->set_track() ->save_stack_trace() ->save_stack_trace_tsk() ->walk_stackframe() ->unwind_frame() ->unwind_find_idx() =>spin_lock_irqsave(&unwind_lock); Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit fe9ed6d2 ] Like the other OF-enabled drivers, use the port number from the firmware if the devicetree specifies an alias: aliases { ... serial2 = &uart2; /* Should be ttyS2 */ } This is how the deprecated pxa.c driver behaved, switching to 8250_pxa messes up the numbering. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Sai Prakash Ranjan authored
[ Upstream commit 5666dfd1 ] SDM845 has ETMv4.2 and can use the existing etm4x driver. But the current etm driver checks only for ETMv4.0 and errors out for other etm4x versions. This patch adds this missing support to enable SoC's with ETMv4x to use same driver by checking only the ETM architecture major version number. Without this change, we get below error during etm probe: / # dmesg | grep etm [ 6.660093] coresight-etm4x: probe of 7040000.etm failed with error -22 [ 6.666902] coresight-etm4x: probe of 7140000.etm failed with error -22 [ 6.673708] coresight-etm4x: probe of 7240000.etm failed with error -22 [ 6.680511] coresight-etm4x: probe of 7340000.etm failed with error -22 [ 6.687313] coresight-etm4x: probe of 7440000.etm failed with error -22 [ 6.694113] coresight-etm4x: probe of 7540000.etm failed with error -22 [ 6.700914] coresight-etm4x: probe of 7640000.etm failed with error -22 [ 6.707717] coresight-etm4x: probe of 7740000.etm failed with error -22 With this change, etm probe is successful: / # dmesg | grep etm [ 6.659198] coresight-etm4x 7040000.etm: CPU0: ETM v4.2 initialized [ 6.665848] coresight-etm4x 7140000.etm: CPU1: ETM v4.2 initialized [ 6.672493] coresight-etm4x 7240000.etm: CPU2: ETM v4.2 initialized [ 6.679129] coresight-etm4x 7340000.etm: CPU3: ETM v4.2 initialized [ 6.685770] coresight-etm4x 7440000.etm: CPU4: ETM v4.2 initialized [ 6.692403] coresight-etm4x 7540000.etm: CPU5: ETM v4.2 initialized [ 6.699024] coresight-etm4x 7640000.etm: CPU6: ETM v4.2 initialized [ 6.705646] coresight-etm4x 7740000.etm: CPU7: ETM v4.2 initialized Signed-off-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit e7140639 ] When building with -Wsometimes-uninitialized, Clang warns: arch/powerpc/xmon/ppc-dis.c:157:7: warning: variable 'opcode' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (cpu_has_feature(CPU_FTRS_POWER9)) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/xmon/ppc-dis.c:167:7: note: uninitialized use occurs here if (opcode == NULL) ^~~~~~ arch/powerpc/xmon/ppc-dis.c:157:3: note: remove the 'if' if its condition is always true if (cpu_has_feature(CPU_FTRS_POWER9)) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/xmon/ppc-dis.c:132:38: note: initialize the variable 'opcode' to silence this warning const struct powerpc_opcode *opcode; ^ = NULL 1 warning generated. This warning seems to make no sense on the surface because opcode is set to NULL right below this statement. However, there is a comma instead of semicolon to end the dialect assignment, meaning that the opcode assignment only happens in the if statement. Properly terminate that line so that Clang no longer warns. Fixes: 5b102782 ("powerpc/xmon: Enable disassembly files (compilation changes)") Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 9390dff6 ] If include/config/auto.conf.cmd is lost for some reasons, it is not self-healing, so the top Makefile misses to run syncconfig. Move include/config/auto.conf.cmd to the target side. I used a pattern rule instead of a normal rule here although it is a bit gross. If the rule were written with a normal rule like this, include/config/auto.conf \ include/config/auto.conf.cmd \ include/config/tristate.conf: $(KCONFIG_CONFIG) $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig ... syncconfig would be executed per target. Using a pattern rule makes sure that syncconfig is executed just once because Make assumes the recipe will create all of the targets. Here is a quote from the GNU Make manual [1]: "Pattern rules may have more than one target. Unlike normal rules, this does not act as many different rules with the same prerequisites and recipe. If a pattern rule has multiple targets, make knows that the rule's recipe is responsible for making all of the targets. The recipe is executed only once to make all the targets. When searching for a pattern rule to match a target, the target patterns of a rule other than the one that matches the target in need of a rule are incidental: make worries only about giving a recipe and prerequisites to the file presently in question. However, when this file's recipe is run, the other targets are marked as having been updated themselves." [1]: https://www.gnu.org/software/make/manual/html_node/Pattern-Intro.htmlSigned-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Benjamin Block authored
[ Upstream commit 1749ef00 ] We had a test-report where, under memory pressure, adding LUNs to the systems would fail (the tests add LUNs strictly in sequence): [ 5525.853432] scsi 0:0:1:1088045124: Direct-Access IBM 2107900 .148 PQ: 0 ANSI: 5 [ 5525.853826] scsi 0:0:1:1088045124: alua: supports implicit TPGS [ 5525.853830] scsi 0:0:1:1088045124: alua: device naa.6005076303ffd32700000000000044da port group 0 rel port 43 [ 5525.853931] sd 0:0:1:1088045124: Attached scsi generic sg10 type 0 [ 5525.854075] sd 0:0:1:1088045124: [sdk] Disabling DIF Type 1 protection [ 5525.855495] sd 0:0:1:1088045124: [sdk] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB) [ 5525.855606] sd 0:0:1:1088045124: [sdk] Write Protect is off [ 5525.855609] sd 0:0:1:1088045124: [sdk] Mode Sense: ed 00 00 08 [ 5525.855795] sd 0:0:1:1088045124: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5525.857838] sdk: sdk1 [ 5525.859468] sd 0:0:1:1088045124: [sdk] Attached SCSI disk [ 5525.865073] sd 0:0:1:1088045124: alua: transition timeout set to 60 seconds [ 5525.865078] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA [ 5526.015070] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA [ 5526.015213] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA [ 5526.587439] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured [ 5526.588562] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured Looking at the code of scsi_alloc_sdev(), and all the calling contexts, there seems to be no reason to use GFP_ATMOIC here. All the different call-contexts use a mutex at some point, and nothing in between that requires no sleeping, as far as I could see. Additionally, the code that later allocates the block queue for the device (scsi_mq_alloc_queue()) already uses GFP_KERNEL. There are similar allocations in two other functions: scsi_probe_and_add_lun(), and scsi_add_lun(),; that can also be done with GFP_KERNEL. Here is the contexts for the three functions so far: scsi_alloc_sdev() scsi_probe_and_add_lun() scsi_sequential_lun_scan() __scsi_scan_target() scsi_scan_target() mutex_lock() scsi_scan_channel() scsi_scan_host_selected() mutex_lock() scsi_report_lun_scan() __scsi_scan_target() ... __scsi_add_device() mutex_lock() __scsi_scan_target() ... scsi_report_lun_scan() ... scsi_get_host_dev() mutex_lock() scsi_probe_and_add_lun() ... scsi_add_lun() scsi_probe_and_add_lun() ... So replace all these, and give them a bit of a better chance to succeed, with more chances of reclaim. Signed-off-by:
Benjamin Block <bblock@linux.ibm.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit 11f5acce ] We store 2 multilevel tables in iommu_table - one for the hardware and one with the corresponding userspace addresses. Before allocating the tables, the iommu_table_group_ops::get_table_size() hook returns the combined size of the two and VFIO SPAPR TCE IOMMU driver adjusts the locked_vm counter correctly. When the table is actually allocated, the amount of allocated memory is stored in iommu_table::it_allocated_size and used to decrement the locked_vm counter when we release the memory used by the table; .get_table_size() and .create_table() calculate it independently but the result is expected to be the same. However the allocator does not add the userspace table size to .it_allocated_size so when we destroy the table because of VFIO PCI unplug (i.e. VFIO container is gone but the userspace keeps running), we decrement locked_vm by just a half of size of memory we are releasing. To make things worse, since we enabled on-demand allocation of indirect levels, it_allocated_size contains only the amount of memory actually allocated at the table creation time which can just be a fraction. It is not a problem with incrementing locked_vm (as get_table_size() value is used) but it is with decrementing. As the result, we leak locked_vm and may not be able to allocate more IOMMU tables after few iterations of hotplug/unplug. This sets it_allocated_size in the pnv_pci_ioda2_ops::create_table() hook to what pnv_pci_ioda2_get_table_size() returns so from now on we have a single place which calculates the maximum memory a table can occupy. The original meaning of it_allocated_size is somewhat lost now though. We do not ditch it_allocated_size whatsoever here and we do not call get_table_size() from vfio_iommu_spapr_tce.c when decrementing locked_vm as we may have multiple IOMMU groups per container and even though they all are supposed to have the same get_table_size() implementation, there is a small chance for failure or confusion. Fixes: 090bad39 ("powerpc/powernv: Add indirect levels to it_userspace") Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Paul Kocialkowski authored
[ Upstream commit 68ef2362 ] According to the chipidea driver bindings, the USB PHY is specified via the "phys" phandle node. However, this only takes effect for USB PHYs that use the common PHY framework. For legacy USB PHYs, a simple lookup based on the USB PHY type is done instead. This does not play out well when more than one USB PHY is registered, since the first registered PHY matching the type will always be returned regardless of what the driver was bound to. Fix this by looking up the PHY based on the "phys" phandle node. Although generic PHYs are rather matched by their "phys-name" and not the "phys" phandle directly, there is no helper for similar lookup on legacy PHYs and it's probably not worth the effort to add it. When no legacy USB PHY is found by phandle, fallback to grabbing any registered USB2 PHY. This ensures backward compatibility if some users were actually relying on this mechanism. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Eric Biggers authored
[ Upstream commit 41798036 ] The cavium/zip implementation of the deflate compression algorithm is incorrectly being registered under the generic driver name, which prevents the generic implementation from being registered with the crypto API when CONFIG_CRYPTO_DEV_CAVIUM_ZIP=y. Similarly the lzs algorithm (which does not currently have a generic implementation...) is incorrectly being registered as lzs-generic. Fix the naming collision by adding a suffix "-cavium" to the cra_driver_name of the cavium/zip algorithms. Fixes: 640035a2 ("crypto: zip - Add ThunderX ZIP driver core") Cc: Mahipal Challa <mahipalreddy2006@gmail.com> Cc: Jan Glauber <jglauber@cavium.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Julia Lawall authored
[ Upstream commit 8c2b43d2 ] Add an of_node_put when a tested device node is not available. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ identifier f; local idexpression e; expression x; @@ e = f(...); ... when != of_node_put(e) when != x = e when != e = x when any if (<+...of_device_is_available(e)...+>) { ... when != of_node_put(e) ( return e; | + of_node_put(e); return ...; ) } // </smpl> Fixes: 5343e674 ("crypto4xx: integrate ppc4xx-rng into crypto4xx") Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 34e022d8 ] The call to of_find_node_by_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/wireless/mediatek/mt76/eeprom.c:58:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:61:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:67:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:70:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:72:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Alexei Avshalom Lazar authored
[ Upstream commit de77a53c ] ies1 or ies2 might be null when code inside _wil_cfg80211_merge_extra_ies access them. Add explicit check for null and make sure ies1/ies2 are not accessed in such a case. spos might be null and be accessed inside _wil_cfg80211_merge_extra_ies. Add explicit check for null in the while condition statement and make sure spos is not accessed in such a case. Signed-off-by:
Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit 95c80bc6 ] Dongdong reported a deadlock triggered by a hotplug event during a sysfs "remove" operation: pciehp 0000:00:0c.0:pcie004: Slot(0-1): Link Up # echo 1 > 0000:00:0c.0/remove PME and hotplug share an MSI/MSI-X vector. The sysfs "remove" side is: remove_store pci_stop_and_remove_bus_device_locked pci_lock_rescan_remove pci_stop_and_remove_bus_device ... pcie_pme_remove pcie_pme_suspend synchronize_irq # wait for hotplug IRQ handler pci_unlock_rescan_remove The hotplug side is: pciehp_ist pciehp_handle_presence_or_link_change pciehp_configure_device pci_lock_rescan_remove # wait for pci_unlock_rescan_remove() INFO: task bash:10913 blocked for more than 120 seconds. # ps -ax |grep D PID TTY STAT TIME COMMAND 10913 ttyAMA0 Ds+ 0:00 -bash 14022 ? D 0:00 [irq/745-pciehp] # cat /proc/14022/stack __switch_to+0x94/0xd8 pci_lock_rescan_remove+0x20/0x28 pciehp_configure_device+0x30/0x140 pciehp_handle_presence_or_link_change+0x324/0x458 pciehp_ist+0x1dc/0x1e0 # cat /proc/10913/stack __switch_to+0x94/0xd8 synchronize_irq+0x8c/0xc0 pcie_pme_suspend+0xa4/0x118 pcie_pme_remove+0x20/0x40 pcie_port_remove_service+0x3c/0x58 ... pcie_port_device_remove+0x2c/0x48 pcie_portdrv_remove+0x68/0x78 pci_device_remove+0x48/0x120 ... pci_stop_bus_device+0x84/0xc0 pci_stop_and_remove_bus_device_locked+0x24/0x40 remove_store+0xa4/0xb8 dev_attr_store+0x44/0x60 sysfs_kf_write+0x58/0x80 It is incorrect to call pcie_pme_suspend() from pcie_pme_remove() for two reasons. First, pcie_pme_suspend() calls synchronize_irq(), which will wait for the native hotplug interrupt handler as well as for the PME one, because they share one IRQ (as per the spec). That may deadlock if hotplug is signaled while pcie_pme_remove() is running and the latter calls pci_lock_rescan_remove() before the former. Second, if pcie_pme_suspend() figures out that wakeup needs to be enabled for the port, it will return without disabling the interrupt as expected by pcie_pme_remove() which was overlooked by commit c7b5a4e6 ("PCI / PM: Fix native PME handling during system suspend/resume"). To fix that, rework pcie_pme_remove() to disable the PME interrupt, clear its status and prevent the PME worker function from re-enabling it before calling free_irq() on it, which should be sufficient. Fixes: c7b5a4e6 ("PCI / PM: Fix native PME handling during system suspend/resume") Link: https://lore.kernel.org/linux-pci/c7697e7c-e1af-13e4-8491-0a3996e6ab5d@huawei.comReported-by:
Dongdong Liu <liudongdong3@huawei.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Tony Jones authored
[ Upstream commit 7c5b019e ] Fix buffer overflow observed when running perf test. The overflow is when trying to evaluate "1ULL << (64 - 1)" which is resulting in -9223372036854775808 which overflows the 20 character buffer. If is possible this bug has been reported before but I still don't see any fix checked in: See: https://www.spinics.net/lists/linux-perf-users/msg07714.htmlReported-by:
Michael Sartain <mikesart@fastmail.com> Reported-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Tony Jones <tonyj@suse.de> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Fixes: f7d82350 ("tools/events: Add files to create libtraceevent.a") Link: http://lkml.kernel.org/r/20190228015532.8941-1-tonyj@suse.deSigned-off-by:
-
Carlos Maiolino authored
[ Upstream commit dce30ca9 ] guard_bio_eod() can truncate a segment in bio to allow it to do IO on odd last sectors of a device. It already checks if the IO starts past EOD, but it does not consider the possibility of an IO request starting within device boundaries can contain more than one segment past EOD. In such cases, truncated_bytes can be bigger than PAGE_SIZE, and will underflow bvec->bv_len. Fix this by checking if truncated_bytes is lower than PAGE_SIZE. This situation has been found on filesystems such as isofs and vfat, which doesn't check the device size before mount, if the device is smaller than the filesystem itself, a readahead on such filesystem, which spans EOD, can trigger this situation, leading a call to zero_user() with a wrong size possibly corrupting memory. I didn't see any crash, or didn't let the system run long enough to check if memory corruption will be hit somewhere, but adding instrumentation to guard_bio_end() to check truncated_bytes size, was enough to see the error. The following script can trigger the error. MNT=/mnt IMG=./DISK.img DEV=/dev/loop0 mkfs.vfat $IMG mount $IMG $MNT cp -R /etc $MNT &> /dev/null umount $MNT losetup -D losetup --find --show --sizelimit 16247280 $IMG mount $DEV $MNT find $MNT -type f -exec cat {} + >/dev/null Kudos to Eric Sandeen for coming up with the reproducer above Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
-
luojiajun authored
[ Upstream commit 6e876c3d ] In jbd2_journal_commit_transaction(), if we are in abort mode, we may flush the buffer without setting descriptor block checksum by goto start_journal_io. Then fs is mounted, jbd2_descriptor_block_csum_verify() failed. [ 271.379811] EXT4-fs (vdd): shut down requested (2) [ 271.381827] Aborting journal on device vdd-8. [ 271.597136] JBD2: Invalid checksum recovering block 22199 in log [ 271.598023] JBD2: recovery failed [ 271.598484] EXT4-fs (vdd): error loading journal Fix this problem by keep setting descriptor block checksum if the descriptor buffer is not NULL. This checksum problem can be reproduced by xfstests generic/388. Signed-off-by:
luojiajun <luojiajun3@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
-
Florian Westphal authored
[ Upstream commit be0502a3 ] TCP resets cause instant transition from established to closed state provided the reset is in-window. Endpoints that implement RFC 5961 require resets to match the next expected sequence number. RST segments that are in-window (but that do not match RCV.NXT) are ignored, and a "challenge ACK" is sent back. Main problem for conntrack is that its a middlebox, i.e. whereas an end host might have ACK'd SEQ (and would thus accept an RST with this sequence number), conntrack might not have seen this ACK (yet). Therefore we can't simply flag RSTs with non-exact match as invalid. This updates RST processing as follows: 1. If the connection is in a state other than ESTABLISHED, nothing is changed, RST is subject to normal in-window check. 2. If the RSTs sequence number either matches exactly RCV.NXT, connection state moves to CLOSE. 3. The same applies if the RST sequence number aligns with a previous packet in the same direction. In all other cases, the connection remains in ESTABLISHED state. If the normal-in-window check passes, the timeout will be lowered to that of CLOSE. If the peer sends a challenge ack, connection timeout will be reset. If the challenge ACK triggers another RST (RST was valid after all), this 2nd RST will match expected sequence and conntrack state changes to CLOSE. If no challenge ACK is received, the connection will time out after CLOSE seconds (10 seconds by default), just like without this patch. Packetdrill test case: 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 win 64240 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 // Receive a segment. 0.210 < P. 1:1001(1000) ack 1 win 46 0.210 > . 1:1(0) ack 1001 // Application writes 1000 bytes. 0.250 write(4, ..., 1000) = 1000 0.250 > P. 1:1001(1000) ack 1001 // First reset, old sequence. Conntrack (correctly) considers this // invalid due to failed window validation (regardless of this patch). 0.260 < R 2:2(0) ack 1001 win 260 // 2nd reset, but too far ahead sequence. Same: correctly handled // as invalid. 0.270 < R 99990001:99990001(0) ack 1001 win 260 // in-window, but not exact sequence. // Current Linux kernels might reply with a challenge ack, and do not // remove connection. // Without this patch, conntrack state moves to CLOSE. // With patch, timeout is lowered like CLOSE, but connection stays // in ESTABLISHED state. 0.280 < R 1010:1010(0) ack 1001 win 260 // Expect challenge ACK 0.281 > . 1001:1001(0) ack 1001 win 501 // With or without this patch, RST will cause connection // to move to CLOSE (sequence number matches) // 0.282 < R 1001:1001(0) ack 1001 win 260 // ACK 0.300 < . 1001:1001(0) ack 1001 win 257 // more data could be exchanged here, connection // is still established // Client closes the connection. 0.610 < F. 1001:1001(0) ack 1001 win 260 0.650 > . 1001:1001(0) ack 1002 // Close the connection without reading outstanding data 0.700 close(4) = 0 // so one more reset. Will be deemed acceptable with patch as well: // connection is already closing. 0.701 > R. 1001:1001(0) ack 1002 win 501 // End packetdrill test case. With patch, this generates following conntrack events: [NEW] 120 SYN_SENT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [UNREPLIED] [UPDATE] 60 SYN_RECV src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [UPDATE] 432000 ESTABLISHED src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED] [UPDATE] 120 FIN_WAIT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED] [UPDATE] 60 CLOSE_WAIT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED] [UPDATE] 10 CLOSE src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED] Without patch, first RST moves connection to close, whereas socket state does not change until FIN is received. [NEW] 120 SYN_SENT src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [UNREPLIED] [UPDATE] 60 SYN_RECV src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [UPDATE] 432000 ESTABLISHED src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [ASSURED] [UPDATE] 10 CLOSE src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [ASSURED] Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Li RongQing authored
[ Upstream commit a9f5e78c ] Check the result of dereferencing base_chain->stats, instead of result of this_cpu_ptr with NULL. base_chain->stats maybe be changed to NULL when a chain is updated and a new NULL counter can be attached. And we do not need to check returning of this_cpu_ptr since base_chain->stats is from percpu allocator if it is non-NULL, this_cpu_ptr returns a valid value. And fix two sparse error by replacing rcu_access_pointer and rcu_dereference with READ_ONCE under rcu_read_lock. Thanks for Eric's help to finish this patch. Fixes: 00924094 ("netfilter: nf_tables: don't assume chain stats are set when jumplabel is set") Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Yao Liu authored
[ Upstream commit 68e2672f ] There is a NULL pointer dereference of devname in strspn() The oops looks something like: CIFS: Attempting to mount (null) BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:strspn+0x0/0x50 ... Call Trace: ? cifs_parse_mount_options+0x222/0x1710 [cifs] ? cifs_get_volume_info+0x2f/0x80 [cifs] cifs_setup_volume_info+0x20/0x190 [cifs] cifs_get_volume_info+0x50/0x80 [cifs] cifs_smb3_do_mount+0x59/0x630 [cifs] ? ida_alloc_range+0x34b/0x3d0 cifs_do_mount+0x11/0x20 [cifs] mount_fs+0x52/0x170 vfs_kern_mount+0x6b/0x170 do_mount+0x216/0xdc0 ksys_mount+0x83/0xd0 __x64_sys_mount+0x25/0x30 do_syscall_64+0x65/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix this by adding a NULL check on devname in cifs_parse_devname() Signed-off-by:
Yao Liu <yotta.liu@ucloud.cn> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Namjae Jeon authored
[ Upstream commit 969ae8e8 ] Old windows version or Netapp SMB server will return NT_STATUS_NOT_SUPPORTED since they do not allow or implement FSCTL_VALIDATE_NEGOTIATE_INFO. The client should accept the response provided it's properly signed. See https://blogs.msdn.microsoft.com/openspecification/2012/06/28/smb3-secure-dialect-negotiation/ and MS-SMB2 validate negotiate response processing: https://msdn.microsoft.com/en-us/library/hh880630.aspx Samba client had already handled it. https://bugzilla.samba.org/attachment.cgi?id=13285&action=editSigned-off-by:
Namjae Jeon <linkinjeon@gmail.com> Signed-off-by:
-
Chao Yu authored
[ Upstream commit 500e0b28 ] We use below condition to check inline_xattr_size boundary: if (!F2FS_OPTION(sbi).inline_xattr_size || F2FS_OPTION(sbi).inline_xattr_size >= DEF_ADDRS_PER_INODE - F2FS_TOTAL_EXTRA_ATTR_SIZE - DEF_INLINE_RESERVED_SIZE - DEF_MIN_INLINE_SIZE) There is there problems in that check: - we should allow inline_xattr_size equaling to min size of inline {data,dentry} area. - F2FS_TOTAL_EXTRA_ATTR_SIZE and inline_xattr_size are based on different size unit, previous one is 4 bytes, latter one is 1 bytes. - DEF_MIN_INLINE_SIZE only indicate min size of inline data area, however, we need to consider min size of inline dentry area as well, minimal inline dentry should at least contain two entries: '.' and '..', so that min inline_dentry size is 40 bytes. .bitmap 1 * 1 = 1 .reserved 1 * 1 = 1 .dentry 11 * 2 = 22 .filename 8 * 2 = 16 total 40 Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
