[Why]
When hotplug a HDMI monitor during entering S0i3 or DPMSOFF state due to
entering infinite loop when calling vbios to program pixel clocks. In
this scenario, pll is enabled but phy is not, and there is not a
programing guide for this case.

[How]
Before we having the proper programing guide, before disable pll, doing
a phy enable and disable to avoid the issue.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Due to previous code changes displays which are in active state
immediately transition to the active and added state. This makes the two
states redundant and unnecessary.

[How]
Instead of updating the device state to active and added after
successful addition, change state to inactive if addition failed. Also,
change references to active and added state to just added state.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
When reprogram MSA with updated color space, the test color space shows
inconsistency. Linux has separate routine to set up test pattern color
space, but it fails to configure RGB.

[How]
Add RGB to test pattern.

Fixes: 43563bc2 ("drm/amd/display: update MSA and VSC SDP on video test pattern request")
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
drm_connector->display_info is not passed to amdgpu_dm right way after
read edid.

[How]
display_info is parsed from edid and saved into drm_connector by
drm_connector_update_edid_proerty which is called within
amdgpu_dm_update_connector_after_detect. call this function after read
edid to update drm_connector->display_info
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
Not programming dto with same values causes test failures in DCN2 diags
DPP tests.

[HOW]
This reverts commit 1b53e733.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VCN HW doesn't support dynamic load balance on multiple instances
for a context. This patch initializes VNC entities with only one
drm_gpu_scheduler picked by drm_sched_pick_best(). Picking a
drm_gpu_scheduler using drm_sched_pick_best() ensures that we
do load balance among multiple contexts but not among multiple
jobs in a context.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove drm_sched_entity_get_free_sched() and use the logic of picking
the least loaded drm scheduler from a drm scheduler list to implement
drm_sched_pick_best(). This patch also exports drm_sched_pick_best() so
that it can be utilized by other drm drivers.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It needs to revert this patch to avoid amdgpu_test compute hang problem
on picasso.

This reverts commit 56822db1.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Puts the i2c adapter in common place for sharing by RAS
and upcoming data read from FRU EEPROM feature.

v2:
Move i2c adapter to amdgpu_pm and rename it.

v3: Move i2c adapter init to ASIC specific code and get rid
of the switch case in amdgpu_device
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Job fence on page table should be a shared one, so add it to the root
page talbe bo resv.
last_delayed field is not needed anymore. so remove it.

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix switch-case indentation in amdgpu_ctx_init_entity()
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

what changed:
1)provide new implementation interface for the rlcg access path
2)put SQ_CMD/SQ_IND_INDEX to GFX9 RLCG path to let debugfs's reg_op
function can access reg that need RLCG path help

now even debugfs's reg_op can used to dump wave.
tested-by: Monk Liu <monk.liu@amd.com>
tested-by: Zhou pengju <pengju.zhou@amd.com>
Signed-off-by: Zhou pengju <pengju.zhou@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1db8c142 (drm/scheduler: Add drm_sched_suspend/resume_timeout()) made
the job_list_lock IRQ safe in as the suspend/resume calls were expected to
be called from IRQ context. This usage never materialized in upstream.
Instead amdgpu started locking the job_list_lock in an IRQ unsafe way in
amdgpu_ib_preempt_mark_partial_job() and amdgpu_ib_preempt_job_recovery(),
which leads to potential deadlock if one would actually start to call the
drm_sched_suspend/resume_timeout functions from IRQ context.

As no current user needs the locking to be IRQ safe, the local IRQ
disable/enable is pure overhead. Fix the inconsistent locking by changing
all uses of job_list_lock to use the IRQ unsafe locking primitives.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add a new trace event to show when jobs are run on the HW.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

clean up unused header in swsmu driver stack:
1. pp_debug.h
2. amd_pcie.h
3. soc15_common.h
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

AccVGPRs are newly added in arcturus. Before reading these
registers, they should be initialized. Otherwise edc error
happens, when RAS is enabled.

v2: reuse the existing logical to calculate register size
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This fixes a problem found on the MacBookPro 2017 Retina panel:

The panel reports 10 bpc color depth in its EDID, and the
firmware chooses link settings at boot which support enough
bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2
aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports
2.7 Gbps (multiplier value 0xa) as possible, in direct
contradiction of what the firmware successfully set up.

This restricts the panel to 8 bpc, not providing the full
color depth of the panel on Linux <= 5.5. Additionally, commit
'4a8ca46b ("drm/amd/display: Default max bpc to 16 for eDP")'
introduced into Linux 5.6-rc1 will unclamp panel depth to
its full 10 bpc, thereby requiring a eDP bandwidth for all
modes that exceeds the bandwidth available and causes all modes
to fail validation -> No modes for the laptop panel -> failure
to set any mode -> Panel goes dark.

This patch adds a quirk specific to the MBP 2017 15" Retina
panel to override reported max link rate to the correct maximum
of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display
precision.

Please apply for Linux 5.6+ to avoid regressing Apple MBP panel
support.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

These are some very loud debug statements that get printed on every
vblank when driver level debug printing is enabled in DRM, and doesn't
really tell us anything that isn't related to vblanks. So let's move
this over to the proper debug flag to be a little less spammy with our
debug output.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If "speed" is zero then we use it as a divisor to find "prescale".  It's
better to move the check for zero to the very start of the function.

Fixes: 9eeec26a ("drm/amd/display: Refine i2c frequency calculating sequence")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

These lines were accidentally indented 4 spaces more than they should
be.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We can remove the NULL check for "res_ctx" and
"res_ctx->pipe_ctx[i].stream->link".  Also it's nicer to align the
conditions using spaces so I re-indented a bit.

Longer explanation: The "res_ctx" pointer points to an address in the
middle of a struct so it can't be NULL.  For
"res_ctx->pipe_ctx[i].stream->link" we know that it is equal to "link"
and "link" is non-NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the Kconfig dependencies so that the menu is presented
correctly by adding a dependency on DRM_AMDGPU to the "menu"
Kconfig statement.  This makes a continuous dependency on
DRM_AMDGPU in the DRM AMD menus and eliminates a broken menu
structure.

Fixes: a8fe58ce ("drm/amd: add ACP driver support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David (ChunMing) Zhou <David1.Zhou@amd.com>
Cc: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The automated conversion of /* fallthrough */ comments converted
a comment outside of an #ifdef/#endif case block that should be
inside the block.

Move the fallthrough inside the block to silence the warning.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the warning
"warn: variable dereferenced before check 'obj' (see line 1131)"
by removing unnecessary checks as amdgpu_ras_debugfs_create_all()
is only called from amdgpu_debugfs_init() where obj member in
con->head list is not NULL.
Use list_for_each_entry() instead list_for_each_entry_safe() as obj
do not to be freeing or removing from list during this process.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This can fix the baco reset failure seen on Navi10.
And this should be a low risk fix as the same sequence
is already used for system suspend/resume.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

RAS support capability needs to be updated on top of different
memeory ECC enablement, and remove redundant memory ecc check
in gmc module for vega20 and arcturus.

v2: check HBM ECC enablement and set ras mask accordingly.
v3: avoid to invoke atomfirmware interface to query twice.
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The offset into the array was specified in bytes but should
be in terms of 32-bit words.  Also prevent large reads that
would also cause a buffer overread.

v2:  Read from correct offset from internal storage buffer.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In dcn20_funcs and dcn21_funcs struct, the member ".dsc_pg_control = NULL"
should be removed due to .dsc_pg_control be assigned to dcn20_dsc_pg_control.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

include amdgpu_ras.h head file instead of use extern
ras_debugfs_create_all function
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

disallow the logical to be enabled on platforms that
don't support gfx ras at this stage, like sriov skus,
dgpu with legacy ras.etc
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

invoking an error injection successfully will cause an at_event intterrupt that

will occur before the invoke sequence can complete causing an invalid error
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

refine the assignment for vcn.num_vcn_inst,
vcn.harvest_config, vcn.num_enc_rings in VF
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd-drm-next-5.7-2020-03-10:

amdgpu:
- SR-IOV fixes
- Fix up fallout from drm load/unload callback removal
- Navi, renoir power management watermark fixes
- Refactor smu parameter handling
- Display FEC fixes
- Display DCC fixes
- HDCP fixes
- Add support for USB-C PD firmware updates
- Pollock detection fix
- Rework compute ring priority handling
- RAS fixes
- Misc cleanups

amdkfd:
- Consolidate more gfx config details in amdgpu
- Consolidate bo alloc flags
- Improve code comments
- SDMA MQD fixes
- Misc cleanups

gpu scheduler:
- Add suport for modifying the sched list

uapi:
- Clarify comments about GEM_CREATE flags that are not used by userspace.
  The kernel driver has always prevented userspace from using these.
  They are only used internally in the kernel driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310212748.4519-1-alexander.deucher@amd.com

drm-misc-next for 5.7:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

Driver Changes:
 - fb-helper: Remove drm_fb_helper_{add,add_all,remove}_one_connector
 - fbdev: some cleanups and dead-code removal
 - Conversions to simple-encoder
 - zero-length array removal
 - Panel: panel-dpi support in panel-simple, Novatek NT35510, Elida
   KD35T133,
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309135439.dicfnbo4ikj4tkz7@gilmour

Requested my mripard for some misc patches that need this as a base.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Some framework test will fail if enable runpm on Vega10.
Disable it untill issue fixed.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Tested-by: Kyle Chen <Kyle.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

and remove each ras IP's own debugfs creation

this is required to fix ras when the driver does not use the drm load
and unload callbacks due to ordering issues with the drm device node.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>