* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Patch up how we claim metadata blocks for quota purposes
  ext4: Ensure zeroout blocks have no dirty metadata
  ext4: return correct wbc.nr_to_write in ext4_da_writepages
  ext4: Update documentation to correct the inode_readahead_blks option name
  jbd2: don't use __GFP_NOFAIL in journal_init_common()
  ext4: flush delalloc blocks when space is low
  fs-writeback: Add helper function to start writeback if idle
  ext4: Eliminate potential double free on error path
  ext4: fix unsigned long long printk warning in super.c
  ext4, jbd2: Add barriers for file systems with exernal journals
  ext4: replace BUG() with return -EIO in ext4_ext_get_blocks
  ext4: add module aliases for ext2 and ext3
  ext4: Don't ask about supporting ext2/3 in ext4 if ext4 is not configured
  ext4: remove unused #include <linux/version.h>

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLAB: Fix lockdep annotation breakage

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI/cardbus: Add a fixup hook and fix powerpc
  PCI: change PCI nomenclature in drivers/pci/ (non-comment changes)
  PCI: change PCI nomenclature in drivers/pci/ (comment changes)
  PCI: fix section mismatch on update_res()
  PCI: add Intel 82599 Virtual Function specific reset method
  PCI: add Intel USB specific reset method
  PCI: support device-specific reset methods
  PCI: Handle case when no pci device can provide cache line size hint
  PCI/PM: Propagate wake-up enable for PCIe devices too
  vgaarbiter: fix a typo in the vgaarbiter Documentation

* 'kvm-updates/2.6.33' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: get rid of kvm_create_vm() unused label warning on s390
  KVM: powerpc: Fix mtsrin in book3s_64 mmu
  KVM: ia64: fix build breakage due to host spinlock change
  KVM: x86: Extend KVM_SET_VCPU_EVENTS with selective updates
  KVM: LAPIC: make sure IRR bitmap is scanned after vm load
  KVM: Fix possible circular locking in kvm_vm_ioctl_assign_device()
  KVM: MMU: remove prefault from invlpg handler

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix Oops at reloading beep devices
  ALSA: hda - Don't cache beep controls
  ALSA: Fix a typo in Procfile.txt
  ALSA: sound/arm: Fix build failure caused by missing struct aaci definition
  ALSA: hda - use snd_hda_jack_detect() again in patch_sigmatel.c
  ALSA: hda - Disable tigger at pin-sensing on AD codecs
  ALSA: hda - HDMI sticky stream tag support
  ALSA: Fix indentation in pcm_native.c

It's DECLARE_KFIFO, not DECLARED_KFIFO.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: blk_rq_err_sectors cleanup
  block: Honor the gfp_mask for alloc_page() in blkdev_issue_discard()
  block: Fix incorrect alignment offset reporting and update documentation
  cfq-iosched: don't regard requests with long distance as close
  aoe: switch to the new bio_flush_dcache_pages() interface
  drivers/block/mg_disk.c: use resource_size()
  drivers/block/DAC960.c: use DAC960_V2_Controller
  block: Fix topology stacking for data and discard alignment
  drbd: remove unused #include <linux/version.h>
  drbd: remove duplicated #include
  drbd: Fix test of unsigned in _drbd_fault_random()
  drbd: Constify struct file_operations
  cfq-iosched: Remove prio_change logic for workload selection
  cfq-iosched: Get rid of nr_groups
  cfq-iosched: Remove the check for same cfq group from allow_merge
  drbd: fix test of unsigned in _drbd_fault_random()
  block: remove Documentation/block/as-iosched.txt

dell-wmi: sys_init_module: 'dell_wmi'->init suspiciously returned 21, it should follow 0/-E convention

wmi_install_notify_handler() returns an acpi_error,
but dell_wmi_init() needs return a -errno style error.
Signed-off-by: Len Brown <len.brown@intel.com>
Tested-by: Paul Rolland <rol@as2917.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: rol@as2917.net <Paul Rolland>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://neil.brown.name/md:
  md: allow a resync that is waiting for other resync to complete, to be aborted.
  md: remove unnecessary code from do_md_run
  md: make recovery started by do_md_run() visible via sync_action
  md: fix small irregularity with start_ro module parameter
  md: Fix unfortunate interaction with evms

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (74 commits)
  Revert "b43: Enforce DMA descriptor memory constraints"
  iwmc3200wifi: fix array out-of-boundary access
  wl1251: timeout one too soon in wl1251_boot_run_firmware()
  mac80211: fix propagation of failed hardware reconfigurations
  mac80211: fix race with suspend and dynamic_ps_disable_work
  ath9k: fix missed error codes in the tx status check
  ath9k: wake hardware during AMPDU TX actions
  ath9k: wake hardware for interface IBSS/AP/Mesh removal
  ath9k: fix suspend by waking device prior to stop
  cfg80211: fix error path in cfg80211_wext_siwscan
  wl1271_cmd.c: cleanup char => u8
  iwlwifi: Storage class should be before const qualifier
  ath9k: Storage class should be before const qualifier
  cfg80211: fix race between deauth and assoc response
  wireless: remove remaining qual code
  rt2x00: Add USB ID for Linksys WUSB 600N rev 2.
  ath5k: fix SWI calibration interrupt storm
  mac80211: fix ibss join with fixed-bssid
  libertas: Remove carrier signaling from the scan code
  orinoco: fix GFP_KERNEL in orinoco_set_key with interrupts disabled
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: core - Fix double unlock in rng_dev_read

generic_permission was refusing CAP_DAC_READ_SEARCH-enabled
processes from opening DAC-protected files read-only, because
do_filp_open adds MAY_OPEN to the open mask.

Ignore MAY_OPEN.  After this patch, CAP_DAC_READ_SEARCH is
again sufficient to open(fname, O_RDONLY) on a file to which
DAC otherwise refuses us read permission.
Reported-by: Mike Kazantsev <mk.fraggod@gmail.com>
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Mike Kazantsev <mk.fraggod@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The wrong address was being used to write the SCIR led regs on remote
hubs.  Also, there was an inconsistency between how BIOS and the kernel
indexed these regs.  Standardize on using the lower 6 bits of the APIC
ID as the index.

This patch fixes the problem of writing to an errant address to a
cpu # >= 64.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Jack Steiner <steiner@sgi.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move sys_mmap_pgoff() from mm/util.c to mm/mmap.c and mm/nommu.c,
where we'd expect to find such code: especially now that it contains
the MAP_HUGETLB handling.  Revert mm/util.c to how it was in 2.6.32.

This patch just ignores MAP_HUGETLB in the nommu case, as in 2.6.32,
whereas 2.6.33-rc2 reported -ENOSYS.  Perhaps validate_mmap_request()
should reject it with -EINVAL?  Add that later if necessary.
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit 45465487 ("kfifo: move struct
kfifo in place") caused a compile failure in ibmvscsitgt.c because it
changed a pointer to kfifo in the libsrp.h structure to a direct
inclusion without including <linux/kfifo.h>.

The fix is simple, just add the include, but how did this happen? This
change, introduced at -rc2, hardly looks like a bug fix, and it clearly
didn't go through linux-next, which would have picked up this compile
failure (it only occurs on ppc because of the ibm virtual scsi target).

[ Apparently all of -mm wasn't in linux-next.. ]
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As reported in Kernel Bugzilla #14936, commit d21cd8f1 triggered a BUG
in the function ext4_da_update_reserve_space() found in
fs/ext4/inode.c.  The root cause of this BUG() was caused by the fact
that ext4_calc_metadata_amount() can severely over-estimate how many
metadata blocks will be needed, especially when using direct
block-mapped files.

In addition, it can also badly *under* estimate how much space is
needed, since ext4_calc_metadata_amount() assumes that the blocks are
contiguous, and this is not always true.  If the application is
writing blocks to a sparse file, the number of metadata blocks
necessary can be severly underestimated by the functions
ext4_da_reserve_space(), ext4_da_update_reserve_space() and
ext4_da_release_space().  This was the cause of the dq_claim_space
reports found on kerneloops.org.

Unfortunately, doing this right means that we need to massively
over-estimate the amount of free space needed.  So in some cases we
may need to force the inode to be written to disk asynchronously in
to avoid spurious quota failures.

http://bugzilla.kernel.org/show_bug.cgi?id=14936Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

blk_rq_err_sectors() seems useless, get rid of it.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

This fixes a bug (found by Curt Wohlgemuth) in which new blocks
returned from an extent created with ext4_ext_zeroout() can have dirty
metadata still associated with them.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

If two arrays share a device, then they will not both resync at the
same time.  One will wait for the other to complete.
While waiting, the MD_RECOVERY_INTR flag is not checked so a device
failure, which would make the resync pointless, does not cause the
resync to abort, so the failed device cannot be removed (as it cannot
be remove while a resync is happening).

So add a test for MD_RECOVERY_INTR.
Reported-by: Brett Russ <bruss@netezza.com>
Signed-off-by: NeilBrown <neilb@suse.de>

Since commit dfc70645,
->hot_remove_disks has not removed non-failed devices from
an array until recovery is no longer possible.
So the code in do_md_run to get around the fact that
md_check_recovery (which calls ->hot_remove_disks) would
remove partially-in-sync devices is no longer needed.

So remove it.
Signed-off-by: NeilBrown <neilb@suse.de>

By default md_do_sync() will perform recovery if no other actions are
specified.  However, action_show() relies on MD_RECOVERY_RECOVER to be
set otherwise it returns 'idle'.  So, add a missing set
MD_RECOVERY_RECOVER when starting recovery.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>

The start_ro modules parameter can be used to force arrays to be
started in 'auto-readonly' in which they are read-only until the first
write.  This ensures that no resync/recovery happens until something
else writes to the device.  This is important for resume-from-disk
off an md array.

However if an array is started 'readonly' (by writing 'readonly' to
the 'array_state' sysfs attribute) we want it to be really 'readonly',
not 'auto-readonly'.

So strengthen the condition to only set auto-readonly if the
array is not already read-only.
Signed-off-by: NeilBrown <neilb@suse.de>

evms configures md arrays by:
  open device
  send ioctl
  close device

for each different ioctl needed.
Since 2.6.29, the device can disappear after the 'close'
unless a significant configuration has happened to the device.
The change made by "SET_ARRAY_INFO" can too minor to stop the device
from disappearing, but important enough that losing the change is bad.

So: make sure SET_ARRAY_INFO sets mddev->ctime, and keep the device
active as long as ctime is non-zero (it gets zeroed with lots of other
things when the array is stopped).

This is suitable for -stable kernels since 2.6.29.
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org

This reverts commit 9bd568a5.

That commit is shown to cause allocation failures during initialization
on some machines.

http://bugzilla.kernel.org/show_bug.cgi?id=14844Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

queue_sector_alignment_offset returned the wrong value which caused
partitions to report an incorrect alignment_offset.  Since offset
alignment calculation is needed several places it has been split into a
separate helper function.  The topology stacking function has been
updated accordingly.

Furthermore, comments have been added to clarify how the stacking
function works.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Allocate priv->rx_packets[IWM_RX_ID_HASH + 1] because the max array
index is IWM_RX_ID_HASH according to IWM_RX_ID_GET_HASH().

Cc: stable@kernel.org
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

`loop' reaches INIT_LOOP + 1 after the loop. so if ACX_INTR_INIT_COMPLETE
occurs in the last iteration the write occurs but also the error out as if a
timeout occurred. This is probably very unlikely to ever occur.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211 does not propagate failed hardware reconfiguration
requests. For suspend and resume this is important due to all
the possible issues that can come out of the suspend <-> resume
cycle. Not propagating the error means cfg80211 will assume
the resume for the device went through fine and mac80211 will
continue on trying to poke at the hardware, enable timers,
queue work, and so on for a device which is completley
unfunctional.

The least we can do is to propagate device start issues and
warn when this occurs upon resume. A side effect of this patch
is we also now propagate the start errors upon harware
reconfigurations (non-suspend), but this should also be desirable
anyway, there is not point in continuing to reconfigure a
device if mac80211 was unable to start the device.

For further details refer to the thread:

http://marc.info/?t=126151038700001&r=1&w=2

Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When mac80211 suspends it calls a driver's suspend callback
as a last step and after that the driver assumes no calls will
be made to it until we resume and its start callback is kicked.
If such calls are made, however, suspend can end up throwing
hardware in an unexpected state and making the device unusable
upon resume.

Fix this by preventing mac80211 to schedule dynamic_ps_disable_work
by checking for when mac80211 starts to suspend and starts
quiescing. Frames should be allowed to go through though as
that is part of the quiescing steps and we do not flush the
mac80211 workqueue since it was already done towards the
beginning of suspend cycle.

The other mac80211 issue will be hanled in the next patch.

For further details see refer to the thread:

http://marc.info/?t=126144866100001&r=1&w=2

Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

My previous change added in:

 commit 815833e7
    ath9k: fix tx status reporting

was not checking all possible tx error conditions. This could possibly
lead to throughput issues due to slow rate control adaption or missed
retransmissions of failed A-MPDU frames.

This patch adds a mask for all possible error conditions and uses it
in the xmit ok check.

Cc: stable@kernel.org
Reported-by: Björn Smedman <bjorn.smedman@venatech.se>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

AMDPDU actions poke hardware for TX operation, as such
we want to turn hardware on for these actions. AMDPU RX operations
do not require hardware on as nothing is done in hardware for
those actions. Without this we cannot guarantee hardware has
been programmed correctly for each AMPDU TX action.

Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When we remove a IBSS/AP/Mesh interface we stop DMA
but to do this we should ensure hardware is on. Awaken
the device prior to these calls. This should ensure
DMA is stopped upon suspend and plain device removal.

Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Ensure the device is awake prior to trying to tell hardware
to stop it. Impact of not doing this is we can likely leave
the device in an undefined state likely causing issues with
suspend and resume. This patch ensures harware is where it
should be prior to suspend.

Cc: stable@kernel.org
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

If there's an invalid channel or SSID, the code leaks
the scan request. Always free the scan request, unless
it was successfully given to the driver.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This is just a clean up and doesn't make a functional difference.  It keeps the
lint checkers happy.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: John W. Linville <linville@tuxdriver.com>