Add a test case for stacktrace from kretprobe handler and
nested kretprobe handlers.

This test checks both of stack trace inside kretprobe handler
and stack trace from pt_regs. Those stack trace must include
actual function return address instead of kretprobe trampoline.
The nested kretprobe stacktrace test checks whether the unwinder
can correctly unwind the call frame on the stack which has been
modified by the kretprobe.

Since the stacktrace on kretprobe is correctly fixed only on x86,
this introduces a meta kconfig ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
which tells user that the stacktrace on kretprobe is correct or not.

The test results will be shown like below;

 TAP version 14
 1..1
     # Subtest: kprobes_test
     1..6
     ok 1 - test_kprobe
     ok 2 - test_kprobes
     ok 3 - test_kretprobe
     ok 4 - test_kretprobes
     ok 5 - test_stacktrace_on_kretprobe
     ok 6 - test_stacktrace_on_nested_kretprobe
 # kprobes_test: pass:6 fail:0 skip:0 total:6
 # Totals: pass:6 fail:0 skip:0 total:6
 ok 1 - kprobes_test

Link: https://lkml.kernel.org/r/163516211244.604541.18350507860972214415.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since the xbc_alloc_mem() and xbc_free_mem() are used from
the __init functions and memblock_alloc() is __init function,
make them __init functions too.

Link: https://lkml.kernel.org/r/163515075747.547467.5746167540626712819.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 4ee1b4ca ("bootconfig: Cleanup dummy headers in tools/bootconfig")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Using the linker script to fix an issue where some archs call the
function tracer with just the ip (instruction pointer) and pip (parent
instruction pointer) where as more up to date archs also pass in the
associated ftrace_ops and the ftrace_regs pointer, the generic code
will be called either with two parameters or four. To avoid any C
undefined behavior of calling two parameters to four or four to two
parameter function, two functions are created, where a preprocessor
macro uses the one that matches the architecture. As the function
pointers for them may be different, a typecast is used. But this
triggers issues with newer compilers that will fail due to -Werror.

A linker trick is now used to map the generic function to the function
that is used (note the generic function is only used to set the default
function callback). The linker trick defines ftrace_ops_list_func (the
generic function) to arch_ftrace_ops_list_func (the arch defined one).

Link: https://lore.kernel.org/all/20200617165616.52241bde@oasis.local.home/

But this fails sh arch because their linker script is included in their
compressed image that does not define arch_ftrace_ops_list_func at all

  sh4-linux-ld:arch/sh/boot/compressed/../../kernel/vmlinux.lds:32: undefined symbol `arch_ftrace_ops_list_func' referenced in expression

Included a stub by that name in the misc.c to allow the code to
compile and link, even though it's not used.

This is similar to what was done for ftrace_stub:

  b83b43ff ("fgraph: Fix function type mismatches of
  ftrace_graph_return using ftrace_stub")

Link: https://lkml.kernel.org/r/20211021221627.5d7270de@rorschach.local.home

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The sparse tool complains as follows:

kernel/trace/trace_hwlat.c:82:27: warning: symbol 'hwlat_single_cpu_data' was not declared. Should it be static?
kernel/trace/trace_hwlat.c:83:1: warning: symbol '__pcpu_scope_hwlat_per_cpu_data' was not declared. Should it be static?

This symbol is not used outside of trace_hwlat.c, so this commit
marks it static.

Link: https://lkml.kernel.org/r/20211021035225.1050685-1-bobo.shaobowang@huawei.comSigned-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

trace_boot_init_histograms misses NULL pointer checks for kstrdup
failure.

Link: https://lkml.kernel.org/r/20211015195550.22742-1-mathieu.desnoyers@efficios.com

Fixes: 64dc7f69 ("tracing/boot: Show correct histogram error command")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since "54357f0c tracing: Add migrate-disabled counter to tracing
output," the migrate disabled field is also printed in the !PREEMPR_RT
kernel config. While this information was added to the vast majority of
tracers, osnoise and timerlat were not updated (because they are new
tracers).

Fix timerlat header by adding the information about migrate disabled.

Link: https://lkml.kernel.org/r/bc0c234ab49946cdd63effa6584e1d5e8662cb44.1634308385.git.bristot@kernel.org

Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Fixes: 54357f0c ("tracing: Add migrate-disabled counter to tracing output.")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since "54357f0c tracing: Add migrate-disabled counter to tracing
output," the migrate disabled field is also printed in the !PREEMPR_RT
kernel config. While this information was added to the vast majority of
tracers, osnoise and timerlat were not updated (because they are new
tracers).

Fix osnoise header by adding the information about migrate disabled.

Link: https://lkml.kernel.org/r/9cb3d54e29e0588dbba12e81486bd8a09adcd8ca.1634308385.git.bristot@kernel.org

Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Fixes: 54357f0c ("tracing: Add migrate-disabled counter to tracing output.")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Fixes a series of typos in the timerlat doc.

Link: https://lkml.kernel.org/r/d3763eb376603890baab908141de6660ba18fff8.1634308385.git.bristot@kernel.org

Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Fixes: a955d7ea ("trace: Add timerlat tracer")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

s/CONFIG_OSNOISE_TRAECR/CONFIG_OSNOISE_TRACER/

No functional changes.

Link: https://lkml.kernel.org/r/33924a16f6e5559ce24952ca7d62561604bfd94a.1634308385.git.bristot@kernel.org

Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

It is useful to trace functions in kernel/event/core.c. Allow ftrace for
them by removing $(CC_FLAGS_FTRACE) from Makefile.

Link: https://lkml.kernel.org/r/20211006210732.2826289-1-songliubraving@fb.com

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

queue_full_warning is a pointer, so it is wrong to use sizeof to calculate
the number of characters of the string it points to. The effect is that we
only print out the first few characters of the warning string.

The correct way is to use strlen(). We don't need to add 1 to the strlen()
because we don't want to write the terminating null character to stdout.

Link: https://lkml.kernel.org/r/20211019160701.15587-1-Viktor.Rosendahl@bmw.de

Link: https://lore.kernel.org/r/8fd4bb65ef3da67feac9ce3258cdbe9824752cf1.1629198502.git.jing.yangyang@zte.com.cn
Link: https://lore.kernel.org/r/20211012025424.180781-1-davidcomponentone@gmail.comReported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

This symbol is not used outside of ftrace.c, so marks it static.

Fixes the following sparse warning:

kernel/trace/ftrace.c:579:5: warning: symbol 'ftrace_profile_pages_init'
was not declared. Should it be static?

Link: https://lkml.kernel.org/r/1634640534-18280-1-git-send-email-jiapeng.chong@linux.alibaba.comReported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: cafb168a ("tracing: make the function profiler per cpu")
Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since the kretprobe replaces the function return address with
the kretprobe_trampoline on the stack, arm unwinder shows it
instead of the correct return address.

This finds the correct return address from the per-task
kretprobe_instances list and verify it is in between the
caller fp and callee fp.

Note that this supports both GCC and clang if CONFIG_FRAME_POINTER=y
and CONFIG_ARM_UNWIND=n. For the ARM unwinder, this is still
not working correctly.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Currently kretprobe on ARM just fills r0-r11 of pt_regs, but
that is not enough for the stacktrace. Moreover, from the user
kretprobe handler, stacktrace needs a frame pointer on the
__kretprobe_trampoline.

This adds a frame pointer on __kretprobe_trampoline for both gcc
and clang case. Those have different frame pointer so we need
different but similar stack on pt_regs.

Gcc makes the frame pointer (fp) to point the 'pc' address of
the {fp, ip (=sp), lr, pc}, this means {r11, r13, r14, r15}.
Thus if we save the r11 (fp) on pt_regs->r12, we can make this
set on the end of pt_regs.

On the other hand, Clang makes the frame pointer to point the
'fp' address of {fp, lr} on stack. Since the next to the
pt_regs->lr is pt_regs->sp, I reused the pair of pt_regs->fp
and pt_regs->ip.
So this stores the 'lr' on pt_regs->ip and make the fp to point
pt_regs->fp.

For both cases, saves __kretprobe_trampoline address to
pt_regs->lr, so that the stack tracer can identify this frame
pointer has been made by the __kretprobe_trampoline.

Note that if the CONFIG_FRAME_POINTER is not set, this keeps
fp as is.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Currently the stacktrace on clang compiled arm kernel uses the 'lr'
register to find the first frame address from pt_regs. However, that
is wrong after calling another function, because the 'lr' register
is used by 'bl' instruction and never be recovered.

As same as gcc arm kernel, directly use the frame pointer (r11) of
the pt_regs to find the first frame address.

Note that this fixes kretprobe stacktrace issue only with
CONFIG_UNWINDER_FRAME_POINTER=y. For the CONFIG_UNWINDER_ARM,
we need another fix.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since the kretprobe replaces the function return address with
the kretprobe_trampoline on the stack, stack unwinder shows it
instead of the correct return address.

This checks whether the next return address is the
__kretprobe_trampoline(), and if so, try to find the correct
return address from the kretprobe instance list. For this purpose
this adds 'kr_cur' loop cursor to memorize the current kretprobe
instance.

With this fix, now arm64 can enable
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE, and pass the
kprobe self tests.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Make a frame pointer (make the x29 register points the
address of pt_regs->regs[29]) on __kretprobe_trampoline.

This frame pointer will be used by the stacktracer when it is
called from the kretprobe handlers. In this case, the stack
tracer will unwind stack to trampoline_probe_handler() and
find the next frame pointer in the stack frame of the
__kretprobe_trampoline().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Record the frame pointer instead of stack address with kretprobe
instance as the identifier on the instance list.
Since arm64 always enable CONFIG_FRAME_POINTER, we can use the
actual frame pointer (x29).

This will allow the stacktrace code to find the original return
address from the FP alone.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Compile kretprobe related stacktrace entry recovery code and
unwind_state::kr_cur field only when CONFIG_KRETPROBES=y.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

This converts the kprobes testcases to use the kunit framework.
It adds a dependency on CONFIG_KUNIT, and the output will change
to TAP:

TAP version 14
1..1
    # Subtest: kprobes_test
    1..4
random: crng init done
    ok 1 - test_kprobe
    ok 2 - test_kprobes
    ok 3 - test_kretprobe
    ok 4 - test_kretprobes
ok 1 - kprobes_test

Note that the kprobes testcases are no longer run immediately after
kprobes initialization, but as a late initcall when kunit is
initialized. kprobes itself is initialized with an early initcall,
so the order is still correct.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

clang started warning about excessive stack usage in
hist_trigger_print_key()

kernel/trace/trace_events_hist.c:4723:13: error: stack frame size (1336) exceeds limit (1024) in function 'hist_trigger_print_key' [-Werror,-Wframe-larger-than]

The problem is that there are two 512-byte arrays on the stack if
hist_trigger_stacktrace_print() gets inlined. I don't think this has
changed in the past five years, but something probably changed the
inlining decisions made by the compiler, so the problem is now made
more obvious.

Rather than printing the symbol names into separate buffers, it
seems we can simply use the special %ps format string modifier
to print the pointers symbolically and get rid of both buffers.

Marking hist_trigger_stacktrace_print() would be a simpler
way of avoiding the warning, but that would not address the
excessive stack usage.

Link: https://lkml.kernel.org/r/20211019153337.294790-1-arnd@kernel.org

Fixes: 69a0200c ("tracing: Add hist trigger support for stacktraces as keys")
Link: https://lore.kernel.org/all/20211015095704.49a99859@gandalf.local.home/Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The current text of the explanation of the transition bit in the trace
recursion protection is not very clear. Improve the text, so that when all
the archs no longer have the issue of tracing between a start of a new
(interrupt) context and updating the preempt_count to reflect the new
context, that it may be removed.

Link: https://lore.kernel.org/all/20211018220203.064a42ed@gandalf.local.home/Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Currently to switch a set of "multi" direct trampolines from one
trampoline to another, a full shutdown of the current set needs to be
done, followed by an update to what trampoline the direct callers would
call, and then re-enabling the callers. This leaves a time when the
functions will not be calling anything, and events may be missed.

Instead, use a trick to allow all the functions with direct trampolines
attached will always call either the new or old trampoline while the
switch is happening. To do this, first attach a "dummy" callback via
ftrace to all the functions that the current direct trampoline is attached
to. This will cause the functions to call the "list func" instead of the
direct trampoline. The list function will call the direct trampoline
"helper" that will set the function it should call as it returns back to
the ftrace trampoline.

At this moment, the direct caller descriptor can safely update the direct
call trampoline. The list function will pick either the new or old
function (depending on the memory coherency model of the architecture).

Now removing the dummy function from each of the locations of the direct
trampoline caller, will put back the direct call, but now to the new
trampoline.

A better visual is:

[ Changing direct call from my_direct_1 to my_direct_2 ]

  <traced_func>:
     call my_direct_1

 ||||||||||||||||||||
 vvvvvvvvvvvvvvvvvvvv

  <traced_func>:
     call ftrace_caller

  <ftrace_caller>:
    [..]
    call ftrace_ops_list_func

	ftrace_ops_list_func()
	{
		ops->func() -> direct_helper -> set rax to my_direct_1 or my_direct_2
	}

   call rax (to either my_direct_1 or my_direct_2

 ||||||||||||||||||||
 vvvvvvvvvvvvvvvvvvvv

  <traced_func>:
     call my_direct_2

Link: https://lore.kernel.org/all/20211014162819.5c85618b@gandalf.local.home/Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Adding simple module that uses multi direct interface:

  register_ftrace_direct_multi
  unregister_ftrace_direct_multi

The init function registers trampoline for 2 functions,
and exit function unregisters them.

Link: https://lkml.kernel.org/r/20211008091336.33616-9-jolsa@kernel.orgSigned-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Adding interface to modify registered direct function
for ftrace_ops. Adding following function:

   modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)

The function changes the currently registered direct
function for all attached functions.

Link: https://lkml.kernel.org/r/20211008091336.33616-8-jolsa@kernel.orgSigned-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Adding interface to register multiple direct functions
within single call. Adding following functions:

  register_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
  unregister_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)

The register_ftrace_direct_multi registers direct function (addr)
with all functions in ops filter. The ops filter can be updated
before with ftrace_set_filter_ip calls.

All requested functions must not have direct function currently
registered, otherwise register_ftrace_direct_multi will fail.

The unregister_ftrace_direct_multi unregisters ops related direct
functions.

Link: https://lkml.kernel.org/r/20211008091336.33616-7-jolsa@kernel.orgSigned-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Factor out the code that adds (ip, addr) tuple to direct_functions
hash in new ftrace_add_rec_direct function. It will be used in
following patches.

Link: https://lkml.kernel.org/r/20211008091336.33616-6-jolsa@kernel.orgSigned-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

There's a new test in trace_selftest_startup_function_graph() that
requires the use of ftrace args being supported as well does some tricks
with dynamic tracing. Although this code checks HAVE_DYNAMIC_FTRACE_WITH_ARGS
it fails to check DYNAMIC_FTRACE, and the kernel fails to build due to
that dependency.

Also only define the prototype of trace_direct_tramp() if it is used.

Link: https://lkml.kernel.org/r/20211021134357.7f48e173@gandalf.local.homeAcked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Adding selftest for checking that direct trampoline can
co-exist together with graph tracer on same function.

This is supported for CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
config option, which is defined only for x86_64 for now.

Link: https://lkml.kernel.org/r/20211008091336.33616-5-jolsa@kernel.orgSigned-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

We don't need special hook for graph tracer entry point,
but instead we can use graph_ops::func function to install
the return_hooker.

This moves the graph tracing setup _before_ the direct
trampoline prepares the stack, so the return_hooker will
be called when the direct trampoline is finished.

This simplifies the code, because we don't need to take into
account the direct trampoline setup when preparing the graph
tracer hooker and we can allow function graph tracer on entries
registered with direct trampoline.

Link: https://lkml.kernel.org/r/20211008091336.33616-4-jolsa@kernel.org

[fixed compile error reported by kernel test robot <lkp@intel.com>]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The function graph tracer is going to now depend on
ARCH_SUPPORTS_FTRACE_OPS, as that also means that it can support ftrace
args. Since ARCH_SUPPORTS_FTRACE_OPS depends on DYNAMIC_FTRACE, this
means that the function graph tracer for x86_64 will need to depend on
DYNAMIC_FTRACE.

Link: https://lkml.kernel.org/r/20211020233555.16b0dbf2@rorschach.local.homeSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Removing the fault protection code when writing return_hooker
to stack. As Steven noted:

> That protection was there from the beginning due to being "paranoid",
> considering ftrace was bricking network cards. But that protection
> would not have even protected against that.

Link: https://lkml.kernel.org/r/20211008091336.33616-3-jolsa@kernel.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

There's identical move 2 lines earlier.

Link: https://lkml.kernel.org/r/20211008091336.33616-2-jolsa@kernel.orgSigned-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Now that there are three different instances of doing the addition trick
to the preempt_count() and NMI_MASK, HARDIRQ_MASK and SOFTIRQ_OFFSET
macros, it deserves a helper function defined in the preempt.h header.

Add the interrupt_context_level() helper and replace the three instances
that do that logic with it.

Link: https://lore.kernel.org/all/20211015142541.4badd8a9@gandalf.local.home/Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Instead of having branches that adds noise to the branch prediction, use
the addition logic to set the bit for the level of interrupt context that
the state is currently in. This copies the logic from perf's
get_recursion_context() function.

Link: https://lore.kernel.org/all/20211015161702.GF174703@worktop.programming.kicks-ass.net/Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

If CONFIG_CFI_CLANG=y, attempting to read an event histogram will cause
the kernel to panic due to failed CFI check.

    1. echo 'hist:keys=common_pid' >> events/sched/sched_switch/trigger
    2. cat events/sched/sched_switch/hist
    3. kernel panics on attempting to read hist

This happens because the sort() function expects a generic
int (*)(const void *, const void *) pointer for the compare function.
To prevent this CFI failure, change tracing map cmp_entries_* function
signatures to match this.

Also, fix the build error reported by the kernel test robot [1].

[1] https://lore.kernel.org/r/202110141140.zzi4dRh4-lkp@intel.com/

Link: https://lkml.kernel.org/r/20211014045217.3265162-1-kaleshsingh@google.comSigned-off-by: Kalesh Singh <kaleshsingh@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

In an effort to enable -Wcast-function-type in the top-level Makefile to
support Control Flow Integrity builds, all function casts need to be
removed.

This means that ftrace_ops_list_func() can no longer be defined as
ftrace_ops_no_ops(). The reason for ftrace_ops_no_ops() is to use that when
an architecture calls ftrace_ops_list_func() with only two parameters
(called from assembly). And to make sure there's no C side-effects, those
archs call ftrace_ops_no_ops() which only has two parameters, as
ftrace_ops_list_func() has four parameters.

Instead of a typecast, use vmlinux.lds.h to define ftrace_ops_list_func() to
arch_ftrace_ops_list_func() that will define the proper set of parameters.

Link: https://lore.kernel.org/r/20200614070154.6039-1-oscar.carter@gmx.com
Link: https://lkml.kernel.org/r/20200617165616.52241bde@oasis.local.home
Link: https://lore.kernel.org/all/20211005053922.GA702049@embeddedor/Requested-by: Oscar Carter <oscar.carter@gmx.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Replace the obsolete and ambiguos macro in_irq() with new
macro in_hardirq().

Link: https://lkml.kernel.org/r/20210930000342.6016-1-changbin.du@gmail.comReviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

A self test is provided for the trace function removal functionality.

Link: https://lkml.kernel.org/r/20210918153043.318016-2-carles.pey@gmail.comSigned-off-by: Carles Pey <carles.pey@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Cleanup dummy headers in tools/bootconfig/include except
for tools/bootconfig/include/linux/bootconfig.h.
For this change, I use __KERNEL__ macro to split kernel
header #include and introduce xbc_alloc_mem() and
xbc_free_mem().

Link: https://lkml.kernel.org/r/163187299574.2366983.18371329724128746091.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>