- 13 Dec, 2018 33 commits
-
-
Bin Liu authored
commit 59861547 upstream. The driver defines three states for a cppi channel. - idle: .chan_busy == 0 && not in .pending list - pending: .chan_busy == 0 && in .pending list - busy: .chan_busy == 1 && not in .pending list There are cases in which the cppi channel could be in the pending state when cppi41_dma_issue_pending() is called after cppi41_runtime_suspend() is called. cppi41_stop_chan() has a bug for these cases to set channels to idle state. It only checks the .chan_busy flag, but not the .pending list, then later when cppi41_runtime_resume() is called the channels in .pending list will be transitioned to busy state. Removing channels from the .pending list solves the problem. Fixes: 975faaeb ("dma: cppi41: start tear down only if channel is busy") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
Bin Liu <b-liu@ti.com> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chuck Lever authored
commit 8dae5398 upstream. call_encode can be invoked more than once per RPC call. Ensure that each call to gss_wrap_req_priv does not overwrite pointers to previously allocated memory. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: stable@kernel.org Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Halil Pasic authored
commit 78b1a52e upstream. While ccw_io_helper() seems like intended to be exclusive in a sense that it is supposed to facilitate I/O for at most one thread at any given time, there is actually nothing ensuring that threads won't pile up at vcdev->wait_q. If they do, all threads get woken up and see the status that belongs to some other request than their own. This can lead to bugs. For an example see: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788432 This race normally does not cause any problems. The operations provided by struct virtio_config_ops are usually invoked in a well defined sequence, normally don't fail, and are normally used quite infrequent too. Yet, if some of the these operations are directly triggered via sysfs attributes, like in the case described by the referenced bug, userspace is given an opportunity to force races by increasing the frequency of the given operations. Let us fix the problem by ensuring, that for each device, we finish processing the previous request before starting with a new one. Signed-off-by:
Halil Pasic <pasic@linux.ibm.com> Reported-by:
Colin Ian King <colin.king@canonical.com> Cc: stable@vger.kernel.org Message-Id: <20180925121309.58524-3-pasic@linux.ibm.com> Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Halil Pasic authored
commit 2448a299 upstream. Currently we have a race on vcdev->config in virtio_ccw_get_config() and in virtio_ccw_set_config(). This normally does not cause problems, as these are usually infrequent operations. However, for some devices writing to/reading from the config space can be triggered through sysfs attributes. For these, userspace can force the race by increasing the frequency. Signed-off-by:
-
Takashi Iwai authored
commit 54947cd6 upstream. We've got a regression report for some Thinkpad models (at least T570s) which shows the too low speaker output volume. The bisection leaded to the commit 61fcf8ec ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform"), and it's basically adding the two pin configurations for the dock, and looks harmless. The real culprit seems, though, that the DAC assignment for the speaker pin is implicitly assumed on these devices, i.e. pin NID 0x14 to be coupled with DAC NID 0x03. When more pins are configured by the commit above, the auto-parser changes the DAC assignment, and this resulted in the regression. As a workaround, just provide the fixed pin / DAC mapping table for this Thinkpad fixup function. It's no generic solution, but the problem itself is pretty much device-specific, so must be good enough. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1554304 Fixes: 61fcf8ec ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform") Cc: <stable@vger.kernel.org> Reported-and-tested-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 5363857b upstream. As addressed in alsa-lib (commit b420056604f0), we need to fix the case where the evaluation of PCM interval "(x x+1]" leading to -EINVAL. After applying rules, such an interval may be translated as "(x x+1)". Fixes: ff2d6acd ("ALSA: pcm: Fix snd_interval_refine first/last with open min/max") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit b51abed8 upstream. Currently the PCM core calls snd_pcm_unlink() always unconditionally at closing a stream. However, since snd_pcm_unlink() invokes the global rwsem down, the lock can be easily contended. More badly, when a thread runs in a high priority RT-FIFO, it may stall at spinning. Basically the call of snd_pcm_unlink() is required only for the linked streams that are already rare occasion. For normal use cases, this code path is fairly superfluous. As an optimization (and also as a workaround for the RT problem above in normal situations without linked streams), this patch adds a check before calling snd_pcm_unlink() and calls it only when needed. Reported-by:
Chanho Min <chanho.min@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Chanho Min authored
commit b888a5f7 upstream. Commit 67ec1072 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream") fixes deadlock for non-atomic PCM stream. But, This patch causes antother stuck. If writer is RT thread and reader is a normal thread, the reader thread will be difficult to get scheduled. It may not give chance to release readlocks and writer gets stuck for a long time if they are pinned to single cpu. The deadlock described in the previous commit is because the linux rwsem queues like a FIFO. So, we might need non-FIFO writelock, not non-block one. My suggestion is that the writer gives reader a chance to be scheduled by using the minimum msleep() instaed of spinning without blocking by writer. Also, The *_nonblock may be changed to *_nonfifo appropriately to this concept. In terms of performance, when trylock is failed, this minimum periodic msleep will have the same performance as the tick-based schedule()/wake_up_q(). [ Although this has a fairly high performance penalty, the relevant code path became already rare due to the previous commit ("ALSA: pcm: Call snd_pcm_unlink() conditionally at closing"). That is, now this unconditional msleep appears only when using linked streams, and this must be a rare case. So we accept this as a quick workaround until finding a more suitable one -- tiwai ] Fixes: 67ec1072 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream") Suggested-by:
Wonmin Jung <wonmin.jung@lge.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 3deef52c upstream. It's similar to other AMD audio devices, it also supports D3, which can save some power drain. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hui Peng authored
commit 5f8cf712 upstream. If a USB sound card reports 0 interfaces, an error condition is triggered and the function usb_audio_probe errors out. In the error path, there was a use-after-free vulnerability where the memory object of the card was first freed, followed by a decrement of the number of active chips. Moving the decrement above the atomic_dec fixes the UAF. [ The original problem was introduced in 3.1 kernel, while it was developed in a different form. The Fixes tag below indicates the original commit but it doesn't mean that the patch is applicable cleanly. -- tiwai ] Fixes: 362e4e49 ("ALSA: usb-audio - clear chip->probing on error exit") Reported-by:
Hui Peng <benquike@gmail.com> Reported-by:
Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by:
-
Mathias Payer authored
commit 704620af upstream. When reading an extra descriptor, we need to properly check the minimum and maximum size allowed, to prevent from invalid data being sent by a device. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alexander Theissen authored
commit d7859905 upstream. Add another Apple Cinema Display to the list of supported displays. Signed-off-by:
Alexander Theissen <alex.theissen@me.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Harry Pan authored
commit 2f2dde6b upstream. Some lower volume SanDisk Ultra Flair in 16GB, which the VID:PID is in 0781:5591, will aggressively request LPM of U1/U2 during runtime, when using this thumb drive as the OS installation key we found the device will generate failure during U1 exit path making it dropped from the USB bus, this causes a corrupted installation in system at the end. i.e., [ 166.918296] hub 2-0:1.0: state 7 ports 7 chg 0000 evt 0004 [ 166.918327] usb usb2-port2: link state change [ 166.918337] usb usb2-port2: do warm reset [ 166.970039] usb usb2-port2: not warm reset yet, waiting 50ms [ 167.022040] usb usb2-port2: not warm reset yet, waiting 200ms [ 167.276043] usb usb2-port2: status 02c0, change 0041, 5.0 Gb/s [ 167.276050] usb 2-2: USB disconnect, device number 2 [ 167.276058] usb 2-2: unregistering device [ 167.276060] usb 2-2: unregistering interface 2-2:1.0 [ 167.276170] xhci_hcd 0000:00:15.0: shutdown urb ffffa3c7cc695cc0 ep1in-bulk [ 167.284055] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 167.284064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 33 04 90 00 01 00 00 ... Analyzed the USB trace in the link layer we realized it is because of the 6-ms timer of tRecoveryConfigurationTimeout which documented on the USB 3.2 Revision 1.0, the section 7.5.10.4.2 of "Exit from Recovery.Configuration"; device initiates U1 exit -> Recovery.Active -> Recovery.Configuration, then the host timer timeout makes the link transits to eSS.Inactive -> Rx.Detect follows by a Warm Reset. Interestingly, the other higher volume of SanDisk Ultra Flair sharing the same VID:PID, such as 64GB, would not request LPM during runtime, it sticks at U0 always, thus disabling LPM does not affect those thumb drives at all. The same odd occures in SanDisk Ultra Fit 16GB, VID:PID in 0781:5583. Signed-off-by:
Harry Pan <harry.pan@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Alexey Brodkin authored
Zebu boards were added in v4.9 and then renamed to "haps" in v4.10. Thus backporting commit 64234961 (ARC: configs: Remove CONFIG_INITRAMFS_SOURCE from defconfigs) we missed "zebu" defconfigs in v4.9. Note this is only applicable to "linux-4.9.y"! Spotted by KerneCI, see [1]. [1] https://storage.kernelci.org/stable/linux-4.9.y/v4.9.144/arc/zebu_hs_smp_defconfig/build.logSigned-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Tetsuo Handa authored
commit 400e2249 upstream. Commit 63f53dea ("mm: warn about allocations which stall for too long") was a great step for reducing possibility of silent hang up problem caused by memory allocation stalls. But this commit reverts it, for it is possible to trigger OOM lockup and/or soft lockups when many threads concurrently called warn_alloc() (in order to warn about memory allocation stalls) due to current implementation of printk(), and it is difficult to obtain useful information due to limitation of synchronous warning approach. Current printk() implementation flushes all pending logs using the context of a thread which called console_unlock(). printk() should be able to flush all pending logs eventually unless somebody continues appending to printk() buffer. Since warn_alloc() started appending to printk() buffer while waiting for oom_kill_process() to make forward progress when oom_kill_process() is processing pending logs, it became possible for warn_alloc() to force oom_kill_process() loop inside printk(). As a result, warn_alloc() significantly increased possibility of preventing oom_kill_process() from making forward progress. ---------- Pseudo code start ---------- Before warn_alloc() was introduced: retry: if (mutex_trylock(&oom_lock)) { while (atomic_read(&printk_pending_logs) > 0) { atomic_dec(&printk_pending_logs); print_one_log(); } // Send SIGKILL here. mutex_unlock(&oom_lock) } goto retry; After warn_alloc() was introduced: retry: if (mutex_trylock(&oom_lock)) { while (atomic_read(&printk_pending_logs) > 0) { atomic_dec(&printk_pending_logs); print_one_log(); } // Send SIGKILL here. mutex_unlock(&oom_lock) } else if (waited_for_10seconds()) { atomic_inc(&printk_pending_logs); } goto retry; ---------- Pseudo code end ---------- Although waited_for_10seconds() becomes true once per 10 seconds, unbounded number of threads can call waited_for_10seconds() at the same time. Also, since threads doing waited_for_10seconds() keep doing almost busy loop, the thread doing print_one_log() can use little CPU resource. Therefore, this situation can be simplified like ---------- Pseudo code start ---------- retry: if (mutex_trylock(&oom_lock)) { while (atomic_read(&printk_pending_logs) > 0) { atomic_dec(&printk_pending_logs); print_one_log(); } // Send SIGKILL here. mutex_unlock(&oom_lock) } else { atomic_inc(&printk_pending_logs); } goto retry; ---------- Pseudo code end ---------- when printk() is called faster than print_one_log() can process a log. One of possible mitigation would be to introduce a new lock in order to make sure that no other series of printk() (either oom_kill_process() or warn_alloc()) can append to printk() buffer when one series of printk() (either oom_kill_process() or warn_alloc()) is already in progress. Such serialization will also help obtaining kernel messages in readable form. ---------- Pseudo code start ---------- retry: if (mutex_trylock(&oom_lock)) { mutex_lock(&oom_printk_lock); while (atomic_read(&printk_pending_logs) > 0) { atomic_dec(&printk_pending_logs); print_one_log(); } // Send SIGKILL here. mutex_unlock(&oom_printk_lock); mutex_unlock(&oom_lock) } else { if (mutex_trylock(&oom_printk_lock)) { atomic_inc(&printk_pending_logs); mutex_unlock(&oom_printk_lock); } } goto retry; ---------- Pseudo code end ---------- But this commit does not go that direction, for we don't want to introduce a new lock dependency, and we unlikely be able to obtain useful information even if we serialized oom_kill_process() and warn_alloc(). Synchronous approach is prone to unexpected results (e.g. too late [1], too frequent [2], overlooked [3]). As far as I know, warn_alloc() never helped with providing information other than "something is going wrong". I want to consider asynchronous approach which can obtain information during stalls with possibly relevant threads (e.g. the owner of oom_lock and kswapd-like threads) and serve as a trigger for actions (e.g. turn on/off tracepoints, ask libvirt daemon to take a memory dump of stalling KVM guest for diagnostic purpose). This commit temporarily loses ability to report e.g. OOM lockup due to unable to invoke the OOM killer due to !__GFP_FS allocation request. But asynchronous approach will be able to detect such situation and emit warning. Thus, let's remove warn_alloc(). [1] https://bugzilla.kernel.org/show_bug.cgi?id=192981 [2] http://lkml.kernel.org/r/CAM_iQpWuPVGc2ky8M-9yukECtS+zKjiDasNymX7rMcBjBFyM_A@mail.gmail.com [3] commit db73ee0d ("mm, vmscan: do not loop on too_many_isolated for ever")) Link: http://lkml.kernel.org/r/1509017339-4802-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Reported-by:
yuwang.yuwang <yuwang.yuwang@alibaba-inc.com> Reported-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Amit Shah <amit@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yangtao Li authored
[ Upstream commit c44c749d ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 5ed9dc99 ] team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin() will send multicast join group message to notify peers. We should do this when enabling/changed to a new port. But it doesn't make sense to do it when a port is disabled. On the other hand, when we set mcast_rejoin_count to 2, and do a failover, team_port_disable() will increase mcast_rejoin.count_pending to 2 and then team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send 4 mcast rejoin messages at latest, which will make user confused. The same with notify_peers.count. Fix it by deleting team_notify_peers() and team_mcast_rejoin() in team_port_disable(). Reported-by:
Liang Li <liali@redhat.com> Fixes: fc423ff0 ("team: add peer notification") Fixes: 492b200e ("team: add support for sending multicast rejoins") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 829383e1 ] memunmap() should be used to free the return of memremap(), not iounmap(). Fixes: dfddb969 ('iommu/vt-d: Switch from ioremap_cache to memremap') Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Vincent Chen authored
[ Upstream commit 426a593e ] In the original ftmac100_interrupt(), the interrupts are only disabled when the condition "netif_running(netdev)" is true. However, this condition causes kerenl hang in the following case. When the user requests to disable the network device, kernel will clear the bit __LINK_STATE_START from the dev->state and then call the driver's ndo_stop function. Network device interrupts are not blocked during this process. If an interrupt occurs between clearing __LINK_STATE_START and stopping network device, kernel cannot disable the interrupts due to the condition "netif_running(netdev)" in the ISR. Hence, kernel will hang due to the continuous interruption of the network device. In order to solve the above problem, the interrupts of the network device should always be disabled in the ISR without being restricted by the condition "netif_running(netdev)". [V2] Remove unnecessary curly braces. Signed-off-by:
Vincent Chen <vincentc@andestech.com> Signed-off-by:
-
Olof Johansson authored
[ Upstream commit 33bf5519 ] PAGE_READ is used by RISC-V arch code included through mm headers, and it makes sense to bring in a prefix on these in the driver. drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined #define PAGE_READ 0x2 In file included from include/linux/memremap.h:7, from include/linux/mm.h:27, from include/linux/scatterlist.h:8, from include/linux/dma-mapping.h:11, from drivers/mtd/nand/raw/qcom_nandc.c:17: arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition Caught by riscv allmodconfig. Signed-off-by:
Olof Johansson <olof@lixom.net> Reviewed-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Aya Levin authored
[ Upstream commit a463146e ] UBSAN: Undefined behavior in drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29 signed integer overflow: 1802201963 + 1802201963 cannot be represented in type 'int' The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors granting of reserved resources. The grant operation is calculated and protected, thus both members of the union cannot be negative. Changed type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed int to unsigned int, allowing large value. Fixes: 5a0d0a61 ("mlx4: Structures and init/teardown for VF resource quotas") Signed-off-by:
Aya Levin <ayal@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
[ Upstream commit 3ea7e7ea ] Initialize the uid variable to zero to avoid the compilation warning. Fixes: 7a89399f ("net/mlx4: Add mlx4_bitmap zone allocator") Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit bd85fbc2 ] When re-registering a user mr, the mpt information for the existing mr when running SRIOV is obtained via the QUERY_MPT fw command. The returned information includes the mpt's lkey. This retrieved mpt information is used to move the mpt back to hardware ownership in the rereg flow (via the SW2HW_MPT fw command when running SRIOV). The fw API spec states that for SW2HW_MPT, the lkey field must be zero. Any ConnectX-3 PF driver which checks for strict spec adherence will return failure for SW2HW_MPT if the lkey field is not zero (although the fw in practice ignores this field for SW2HW_MPT). Thus, in order to conform to the fw API spec, set the lkey field to zero before invoking SW2HW_MPT when running SRIOV. Fixes: e630664c ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit ed4eac20 ] The value of "sb_index" is written by the hardware. Reading its value and writing it to "index" must finish before checking the loop condition. Signed-off-by:
Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by:
Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit 9aaa4e8b ] Release PTT before entering error flow. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit 77e461d1 ] Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW uses this channel for DMAE operations (e.g., TIME_SYNC implementation). Driver also uses the same channel 0 for DMAE operations for some of the PFs (e.g., PF0 on Port0). This could lead to concurrent access to the DMAE channel by FW and driver which is not legal. Hence need to assign unique DMAE id for FW. Currently following DMAE channels are used by the clients, MFW - OCBB/OCSD functionality uses DMAE channel 14/15 Driver 0-3 and 8-11 (for PF dmae operations) 4 and 12 (for stats requests) Assigning unique dmae_id '13' to the FW. Changes from previous version: ------------------------------ v2: Incorporated the review comments. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit d7d8bbb4 ] The complete size ("total_size") of the fragmented packet is stored in the fragment header and in the size of the fragment chain. When the fragments are ready for merge, the skbuff's tail of the first fragment is expanded to have enough room after the data pointer for at least total_size. This means that it gets expanded by total_size - first_skb->len. But this is ignoring the fact that after expanding the buffer, the fragment header is pulled by from this buffer. Assuming that the tailroom of the buffer was already 0, the buffer after the data pointer of the skbuff is now only total_size - len(fragment_header) large. When the merge function is then processing the remaining fragments, the code to copy the data over to the merged skbuff will cause an skb_over_panic when it tries to actually put enough data to fill the total_size bytes of the packet. The size of the skb_pull must therefore also be taken into account when the buffer's tailroom is expanded. Fixes: 610bfc6b ("batman-adv: Receive fragmented packets and merge") Reported-by:
Martin Weinelt <martin@darmstadt.freifunk.net> Co-authored-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Benson Leung authored
[ Upstream commit 0fd79184 ] The Motorola/Zebra Symbol DS4308-HD is a handheld USB barcode scanner which does not have a battery, but reports one anyway that always has capacity 2. Let's apply the IGNORE quirk to prevent it from being treated like a power supply so that userspaces don't get confused that this accessory is almost out of power and warn the user that they need to charge their wired barcode scanner. Reported here: https://bugs.chromium.org/p/chromium/issues/detail?id=804720Signed-off-by:
Benson Leung <bleung@chromium.org> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Fabrizio Castro authored
[ Upstream commit 68c8d209 ] Assigning 2 to "renesas,can-clock-select" tricks the driver into registering the CAN interface, even though we don't want that. This patch improves one of the checks to prevent that from happening. Fixes: 862e2b6a ("can: rcar_can: support all input clocks") Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by:
Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit e5b78f2e ] If iommu_ops.add_device() fails, iommu_ops.domain_free() is still called, leading to a crash, as the domain was only partially initialized: ipmmu-vmsa e67b0000.mmu: Cannot accommodate DMA translation for IOMMU page tables sata_rcar ee300000.sata: Unable to initialize IPMMU context iommu: Failed to add device ee300000.sata to group 0: -22 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 ... Call trace: ipmmu_domain_free+0x1c/0xa0 iommu_group_release+0x48/0x68 kobject_put+0x74/0xe8 kobject_del.part.0+0x3c/0x50 kobject_put+0x60/0xe8 iommu_group_get_for_dev+0xa8/0x1f0 ipmmu_add_device+0x1c/0x40 of_iommu_configure+0x118/0x190 Fix this by checking if the domain's context already exists, before trying to destroy it. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Fixes: d25a2a16 ('iommu: Add driver for Renesas VMSA-compatible IPMMU') Signed-off-by:
-
Rafał Miłecki authored
[ Upstream commit 3401d42c ] Previous commit /adding/ support for 160 MHz chanspecs was incomplete. It didn't set bandwidth info and didn't extract control channel info. As the result it was also using uninitialized "sb" var. This change has been tested for two chanspecs found to be reported by some devices/firmwares: 1) 60/160 (0xee32) Before: chnum:50 control_ch_num:36 After: chnum:50 control_ch_num:60 2) 120/160 (0xed72) Before: chnum:114 control_ch_num:100 After: chnum:114 control_ch_num:120 Fixes: 330994e8 ("brcmfmac: fix for proper support of 160MHz bandwidth") Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Lu Baolu authored
[ Upstream commit 19ed3e2d ] When handling page request without pasid event, go to "no_pasid" branch instead of "bad_req". Otherwise, a NULL pointer deference will happen there. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Fixes: a222a7f0 'iommu/vt-d: Implement page request handling' Signed-off-by:
-
Sakari Ailus authored
[ Upstream commit 30efae3d ] While there are issues related to object lifetime management, unregister the media device first when the driver is being unbound. This is slightly safer. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
- 08 Dec, 2018 7 commits
-
-
Greg Kroah-Hartman authored
-
Mike Kravetz authored
commit 5df63c2a upstream. This is a fix for a regression in 32 bit kernels caused by an invalid check for pgoff overflow in hugetlbfs mmap setup. The check incorrectly specified that the size of a loff_t was the same as the size of a long. The regression prevents mapping hugetlbfs files at offsets greater than 4GB on 32 bit kernels. On 32 bit kernels conversion from a page based unsigned long can not overflow a loff_t byte offset. Therefore, skip this check if sizeof(unsigned long) != sizeof(loff_t). Link: http://lkml.kernel.org/r/20180330145402.5053-1-mike.kravetz@oracle.com Fixes: 63489f8e ("hugetlbfs: check for pgoff value overflow") Reported-by:
Dan Rue <dan.rue@linaro.org> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Tested-by:
Anders Roxell <anders.roxell@linaro.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Yisheng Xie <xieyisheng1@huawei.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nic Losby <blurbdust@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Darrick J. Wong authored
commit 7b38460d upstream. Kanda Motohiro reported that expanding a tiny xattr into a large xattr fails on XFS because we remove the tiny xattr from a shortform fork and then try to re-add it after converting the fork to extents format having not removed the ATTR_REPLACE flag. This fails because the attr is no longer present, causing a fs shutdown. This is derived from the patch in his bug report, but we really shouldn't ignore a nonzero retval from the remove call. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199119 Reported-by: kanda.motohiro@gmail.com Reviewed-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Chao Yu authored
commit e494c2f9 upstream. After fuzzing, cp_pack_start_sum could be corrupted, so current log's summary info should be wrong due to loading incorrect summary block. Then, if segment's type in current log is exceeded NR_CURSEG_TYPE, it can lead accessing invalid dirty_i->dirty_segmap bitmap finally. Add sanity check for cp_pack_start_sum to fix this issue. https://bugzilla.kernel.org/show_bug.cgi?id=200419 - Reproduce - Kernel message (f2fs-dev w/ KASAN) [ 3117.578432] F2FS-fs (loop0): Invalid log blocks per segment (8) [ 3117.578445] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 3117.581364] F2FS-fs (loop0): invalid crc_offset: 30716 [ 3117.583564] WARNING: CPU: 1 PID: 1225 at fs/f2fs/checkpoint.c:90 __get_meta_page+0x448/0x4b0 [ 3117.583570] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.584014] CPU: 1 PID: 1225 Comm: mount Not tainted 4.17.0+ #1 [ 3117.584017] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.584022] RIP: 0010:__get_meta_page+0x448/0x4b0 [ 3117.584023] Code: 00 49 8d bc 24 84 00 00 00 e8 74 54 da ff 41 83 8c 24 84 00 00 00 08 4c 89 f6 4c 89 ef e8 c0 d9 95 00 48 89 ef e8 18 e3 00 00 <0f> 0b f0 80 4d 48 04 e9 0f fe ff ff 0f 0b 48 89 c7 48 89 04 24 e8 [ 3117.584072] RSP: 0018:ffff88018eb678c0 EFLAGS: 00010286 [ 3117.584082] RAX: ffff88018f0a6a78 RBX: ffffea0007a46600 RCX: ffffffff9314d1b2 [ 3117.584085] RDX: ffffffff00000001 RSI: 0000000000000000 RDI: ffff88018f0a6a98 [ 3117.584087] RBP: ffff88018ebe9980 R08: 0000000000000002 R09: 0000000000000001 [ 3117.584090] R10: 0000000000000001 R11: ffffed00326e4450 R12: ffff880193722200 [ 3117.584092] R13: ffff88018ebe9afc R14: 0000000000000206 R15: ffff88018eb67900 [ 3117.584096] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.584098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.584101] CR2: 00000000016f21b8 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.584112] Call Trace: [ 3117.584121] ? f2fs_set_meta_page_dirty+0x150/0x150 [ 3117.584127] ? f2fs_build_segment_manager+0xbf9/0x3190 [ 3117.584133] ? f2fs_npages_for_summary_flush+0x75/0x120 [ 3117.584145] f2fs_build_segment_manager+0xda8/0x3190 [ 3117.584151] ? f2fs_get_valid_checkpoint+0x298/0xa00 [ 3117.584156] ? f2fs_flush_sit_entries+0x10e0/0x10e0 [ 3117.584184] ? map_id_range_down+0x17c/0x1b0 [ 3117.584188] ? __put_user_ns+0x30/0x30 [ 3117.584206] ? find_next_bit+0x53/0x90 [ 3117.584237] ? cpumask_next+0x16/0x20 [ 3117.584249] f2fs_fill_super+0x1948/0x2b40 [ 3117.584258] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584279] ? sget_userns+0x65e/0x690 [ 3117.584296] ? set_blocksize+0x88/0x130 [ 3117.584302] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584305] mount_bdev+0x1c0/0x200 [ 3117.584310] mount_fs+0x5c/0x190 [ 3117.584320] vfs_kern_mount+0x64/0x190 [ 3117.584330] do_mount+0x2e4/0x1450 [ 3117.584343] ? lockref_put_return+0x130/0x130 [ 3117.584347] ? copy_mount_string+0x20/0x20 [ 3117.584357] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.584362] ? kasan_kmalloc+0xa6/0xd0 [ 3117.584373] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.584377] ? __kmalloc_track_caller+0x196/0x210 [ 3117.584383] ? _copy_from_user+0x61/0x90 [ 3117.584396] ? memdup_user+0x3e/0x60 [ 3117.584401] ksys_mount+0x7e/0xd0 [ 3117.584405] __x64_sys_mount+0x62/0x70 [ 3117.584427] do_syscall_64+0x73/0x160 [ 3117.584440] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.584455] RIP: 0033:0x7f5693f14b9a [ 3117.584456] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.584505] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.584510] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.584512] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.584514] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.584516] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.584519] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.584523] ---[ end trace a8e0d899985faf31 ]--- [ 3117.685663] F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix. [ 3117.685673] F2FS-fs (loop0): recover_data: ino = 2 (i_size: recover) recovered = 1, err = 0 [ 3117.685707] ================================================================== [ 3117.685955] BUG: KASAN: slab-out-of-bounds in __remove_dirty_segment+0xdd/0x1e0 [ 3117.686175] Read of size 8 at addr ffff88018f0a63d0 by task mount/1225 [ 3117.686477] CPU: 0 PID: 1225 Comm: mount Tainted: G W 4.17.0+ #1 [ 3117.686481] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.686483] Call Trace: [ 3117.686494] dump_stack+0x71/0xab [ 3117.686512] print_address_description+0x6b/0x290 [ 3117.686517] kasan_report+0x28e/0x390 [ 3117.686522] ? __remove_dirty_segment+0xdd/0x1e0 [ 3117.686527] __remove_dirty_segment+0xdd/0x1e0 [ 3117.686532] locate_dirty_segment+0x189/0x190 [ 3117.686538] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.686543] recover_data+0x703/0x2c20 [ 3117.686547] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.686553] ? ksys_mount+0x7e/0xd0 [ 3117.686564] ? policy_nodemask+0x1a/0x90 [ 3117.686567] ? policy_node+0x56/0x70 [ 3117.686571] ? add_fsync_inode+0xf0/0xf0 [ 3117.686592] ? blk_finish_plug+0x44/0x60 [ 3117.686597] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.686602] ? find_inode_fast+0xac/0xc0 [ 3117.686606] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.686618] ? __radix_tree_lookup+0x150/0x150 [ 3117.686633] ? dqget+0x670/0x670 [ 3117.686648] ? pagecache_get_page+0x29/0x410 [ 3117.686656] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.686660] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.686664] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.686670] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.686674] ? rb_insert_color+0x323/0x3d0 [ 3117.686678] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.686683] ? proc_register+0x153/0x1d0 [ 3117.686686] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.686695] ? f2fs_attr_store+0x50/0x50 [ 3117.686700] ? proc_create_single_data+0x52/0x60 [ 3117.686707] f2fs_fill_super+0x1d06/0x2b40 [ 3117.686728] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686735] ? sget_userns+0x65e/0x690 [ 3117.686740] ? set_blocksize+0x88/0x130 [ 3117.686745] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686748] mount_bdev+0x1c0/0x200 [ 3117.686753] mount_fs+0x5c/0x190 [ 3117.686758] vfs_kern_mount+0x64/0x190 [ 3117.686762] do_mount+0x2e4/0x1450 [ 3117.686769] ? lockref_put_return+0x130/0x130 [ 3117.686773] ? copy_mount_string+0x20/0x20 [ 3117.686777] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.686780] ? kasan_kmalloc+0xa6/0xd0 [ 3117.686786] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.686790] ? __kmalloc_track_caller+0x196/0x210 [ 3117.686795] ? _copy_from_user+0x61/0x90 [ 3117.686801] ? memdup_user+0x3e/0x60 [ 3117.686804] ksys_mount+0x7e/0xd0 [ 3117.686809] __x64_sys_mount+0x62/0x70 [ 3117.686816] do_syscall_64+0x73/0x160 [ 3117.686824] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.686829] RIP: 0033:0x7f5693f14b9a [ 3117.686830] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.686887] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.686892] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.686894] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.686896] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.686899] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.686901] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.687005] Allocated by task 1225: [ 3117.687152] kasan_kmalloc+0xa6/0xd0 [ 3117.687157] kmem_cache_alloc_trace+0xfd/0x200 [ 3117.687161] f2fs_build_segment_manager+0x2d09/0x3190 [ 3117.687165] f2fs_fill_super+0x1948/0x2b40 [ 3117.687168] mount_bdev+0x1c0/0x200 [ 3117.687171] mount_fs+0x5c/0x190 [ 3117.687174] vfs_kern_mount+0x64/0x190 [ 3117.687177] do_mount+0x2e4/0x1450 [ 3117.687180] ksys_mount+0x7e/0xd0 [ 3117.687182] __x64_sys_mount+0x62/0x70 [ 3117.687186] do_syscall_64+0x73/0x160 [ 3117.687190] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.687285] Freed by task 19: [ 3117.687412] __kasan_slab_free+0x137/0x190 [ 3117.687416] kfree+0x8b/0x1b0 [ 3117.687460] ttm_bo_man_put_node+0x61/0x80 [ttm] [ 3117.687476] ttm_bo_cleanup_refs+0x15f/0x250 [ttm] [ 3117.687492] ttm_bo_delayed_delete+0x2f0/0x300 [ttm] [ 3117.687507] ttm_bo_delayed_workqueue+0x17/0x50 [ttm] [ 3117.687528] process_one_work+0x2f9/0x740 [ 3117.687531] worker_thread+0x78/0x6b0 [ 3117.687541] kthread+0x177/0x1c0 [ 3117.687545] ret_from_fork+0x35/0x40 [ 3117.687638] The buggy address belongs to the object at ffff88018f0a6300 which belongs to the cache kmalloc-192 of size 192 [ 3117.688014] The buggy address is located 16 bytes to the right of 192-byte region [ffff88018f0a6300, ffff88018f0a63c0) [ 3117.688382] The buggy address belongs to the page: [ 3117.688554] page:ffffea00063c2980 count:1 mapcount:0 mapping:ffff8801f3403180 index:0x0 [ 3117.688788] flags: 0x17fff8000000100(slab) [ 3117.688944] raw: 017fff8000000100 ffffea00063c2840 0000000e0000000e ffff8801f3403180 [ 3117.689166] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 3117.689386] page dumped because: kasan: bad access detected [ 3117.689653] Memory state around the buggy address: [ 3117.689816] ffff88018f0a6280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3117.690027] ffff88018f0a6300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690239] >ffff88018f0a6380: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.690448] ^ [ 3117.690644] ffff88018f0a6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690868] ffff88018f0a6480: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.691077] ================================================================== [ 3117.691290] Disabling lock debugging due to kernel taint [ 3117.693893] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 3117.694120] PGD 80000001f01bc067 P4D 80000001f01bc067 PUD 1d9638067 PMD 0 [ 3117.694338] Oops: 0002 [#1] SMP KASAN PTI [ 3117.694490] CPU: 1 PID: 1225 Comm: mount Tainted: G B W 4.17.0+ #1 [ 3117.694703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.695073] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.695246] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.695793] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.695969] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.696182] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.696391] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.696604] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.696813] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.697032] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.697280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.702357] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.707235] Call Trace: [ 3117.712077] locate_dirty_segment+0x189/0x190 [ 3117.716891] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.721617] recover_data+0x703/0x2c20 [ 3117.726316] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.730957] ? ksys_mount+0x7e/0xd0 [ 3117.735573] ? policy_nodemask+0x1a/0x90 [ 3117.740198] ? policy_node+0x56/0x70 [ 3117.744829] ? add_fsync_inode+0xf0/0xf0 [ 3117.749487] ? blk_finish_plug+0x44/0x60 [ 3117.754152] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.758831] ? find_inode_fast+0xac/0xc0 [ 3117.763448] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.768046] ? __radix_tree_lookup+0x150/0x150 [ 3117.772603] ? dqget+0x670/0x670 [ 3117.777159] ? pagecache_get_page+0x29/0x410 [ 3117.781648] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.786067] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.790476] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.794790] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.799086] ? rb_insert_color+0x323/0x3d0 [ 3117.803304] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.807563] ? proc_register+0x153/0x1d0 [ 3117.811766] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.815947] ? f2fs_attr_store+0x50/0x50 [ 3117.820087] ? proc_create_single_data+0x52/0x60 [ 3117.824262] f2fs_fill_super+0x1d06/0x2b40 [ 3117.828367] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.832432] ? sget_userns+0x65e/0x690 [ 3117.836500] ? set_blocksize+0x88/0x130 [ 3117.840501] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.844420] mount_bdev+0x1c0/0x200 [ 3117.848275] mount_fs+0x5c/0x190 [ 3117.852053] vfs_kern_mount+0x64/0x190 [ 3117.855810] do_mount+0x2e4/0x1450 [ 3117.859441] ? lockref_put_return+0x130/0x130 [ 3117.862996] ? copy_mount_string+0x20/0x20 [ 3117.866417] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.869719] ? kasan_kmalloc+0xa6/0xd0 [ 3117.872948] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.876121] ? __kmalloc_track_caller+0x196/0x210 [ 3117.879333] ? _copy_from_user+0x61/0x90 [ 3117.882467] ? memdup_user+0x3e/0x60 [ 3117.885604] ksys_mount+0x7e/0xd0 [ 3117.888700] __x64_sys_mount+0x62/0x70 [ 3117.891742] do_syscall_64+0x73/0x160 [ 3117.894692] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.897669] RIP: 0033:0x7f5693f14b9a [ 3117.900563] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.906922] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.910159] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.913469] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.916764] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.920071] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.923393] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.926680] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.949979] CR2: 0000000000000000 [ 3117.954283] ---[ end trace a8e0d899985faf32 ]--- [ 3117.958575] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.962810] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.971789] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.976333] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.980926] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.985497] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.990098] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.994761] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.999392] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3118.004096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3118.008816] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 - Location https://elixir.bootlin.com/linux/v4.18-rc3/source/fs/f2fs/segment.c#L775 if (test_and_clear_bit(segno, dirty_i->dirty_segmap[t])) dirty_i->nr_dirty[t]--; Here dirty_i->dirty_segmap[t] can be NULL which leads to crash in test_and_clear_bit() Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> [bwh: Backported to 4.9: The function is called sanity_check_ckpt()] Signed-off-by:
-
Jaegeuk Kim authored
commit a2125ff7 upstream. This fixes missing freeing meta pages in the error case. Tested-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Chao Yu authored
commit 91291e99 upstream. This patch adds f2fs_is_valid_blkaddr() in below functions to do sanity check with block address to avoid pentential panic: - f2fs_grab_read_bio() - __written_first_block() https://bugzilla.kernel.org/show_bug.cgi?id=200465 - Reproduce - POC (poc.c) #define _GNU_SOURCE #include <sys/types.h> #include <sys/mount.h> #include <sys/mman.h> #include <sys/stat.h> #include <sys/xattr.h> #include <dirent.h> #include <errno.h> #include <error.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <linux/falloc.h> #include <linux/loop.h> static void activity(char *mpoint) { char *xattr; int err; err = asprintf(&xattr, "%s/foo/bar/xattr", mpoint); char buf2[113]; memset(buf2, 0, sizeof(buf2)); listxattr(xattr, buf2, sizeof(buf2)); } int main(int argc, char *argv[]) { activity(argv[1]); return 0; } - kernel message [ 844.718738] F2FS-fs (loop0): Mounted with checkpoint version = 2 [ 846.430929] F2FS-fs (loop0): access invalid blkaddr:1024 [ 846.431058] WARNING: CPU: 1 PID: 1249 at fs/f2fs/checkpoint.c:154 f2fs_is_valid_blkaddr+0x10f/0x160 [ 846.431059] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.431310] CPU: 1 PID: 1249 Comm: a.out Not tainted 4.18.0-rc3+ #1 [ 846.431312] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.431315] RIP: 0010:f2fs_is_valid_blkaddr+0x10f/0x160 [ 846.431316] Code: 00 eb ed 31 c0 83 fa 05 75 ae 48 83 ec 08 48 8b 3f 89 f1 48 c7 c2 fc 0b 0f 8b 48 c7 c6 8b d7 09 8b 88 44 24 07 e8 61 8b ff ff <0f> 0b 0f b6 44 24 07 48 83 c4 08 eb 81 4c 8b 47 10 8b 8f 38 04 00 [ 846.431347] RSP: 0018:ffff961c414a7bc0 EFLAGS: 00010282 [ 846.431349] RAX: 0000000000000000 RBX: ffffc5f787b8ea80 RCX: 0000000000000000 [ 846.431350] RDX: 0000000000000000 RSI: ffff89dfffd165d8 RDI: ffff89dfffd165d8 [ 846.431351] RBP: ffff961c414a7c20 R08: 0000000000000001 R09: 0000000000000248 [ 846.431353] R10: 0000000000000000 R11: 0000000000000248 R12: 0000000000000007 [ 846.431369] R13: ffff89dff5492800 R14: ffff89dfae3aa000 R15: ffff89dff4ff88d0 [ 846.431372] FS: 00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000 [ 846.431373] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.431374] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0 [ 846.431384] Call Trace: [ 846.431426] f2fs_iget+0x6f4/0xe70 [ 846.431430] ? f2fs_find_entry+0x71/0x90 [ 846.431432] f2fs_lookup+0x1aa/0x390 [ 846.431452] __lookup_slow+0x97/0x150 [ 846.431459] lookup_slow+0x35/0x50 [ 846.431462] walk_component+0x1c6/0x470 [ 846.431479] ? memcg_kmem_charge_memcg+0x70/0x90 [ 846.431488] ? page_add_file_rmap+0x13/0x200 [ 846.431491] path_lookupat+0x76/0x230 [ 846.431501] ? __alloc_pages_nodemask+0xfc/0x280 [ 846.431504] filename_lookup+0xb8/0x1a0 [ 846.431534] ? _cond_resched+0x16/0x40 [ 846.431541] ? kmem_cache_alloc+0x160/0x1d0 [ 846.431549] ? path_listxattr+0x41/0xa0 [ 846.431551] path_listxattr+0x41/0xa0 [ 846.431570] do_syscall_64+0x55/0x100 [ 846.431583] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 846.431607] RIP: 0033:0x7f882de1c0d7 [ 846.431607] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48 [ 846.431639] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2 [ 846.431641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7 [ 846.431642] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0 [ 846.431643] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000 [ 846.431645] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550 [ 846.431646] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000 [ 846.431648] ---[ end trace abca54df39d14f5c ]--- [ 846.431651] F2FS-fs (loop0): invalid blkaddr: 1024, type: 5, run fsck to fix. [ 846.431762] WARNING: CPU: 1 PID: 1249 at fs/f2fs/f2fs.h:2697 f2fs_iget+0xd17/0xe70 [ 846.431763] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.431797] CPU: 1 PID: 1249 Comm: a.out Tainted: G W 4.18.0-rc3+ #1 [ 846.431798] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.431800] RIP: 0010:f2fs_iget+0xd17/0xe70 [ 846.431801] Code: ff ff 48 63 d8 e9 e1 f6 ff ff 48 8b 45 c8 41 b8 05 00 00 00 48 c7 c2 d8 e8 0e 8b 48 c7 c6 1d b0 0a 8b 48 8b 38 e8 f9 b4 00 00 <0f> 0b 48 8b 45 c8 f0 80 48 48 04 e9 d8 f9 ff ff 0f 0b 48 8b 43 18 [ 846.431832] RSP: 0018:ffff961c414a7bd0 EFLAGS: 00010282 [ 846.431834] RAX: 0000000000000000 RBX: ffffc5f787b8ea80 RCX: 0000000000000006 [ 846.431835] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff89dfffd165d0 [ 846.431836] RBP: ffff961c414a7c20 R08: 0000000000000000 R09: 0000000000000273 [ 846.431837] R10: 0000000000000000 R11: ffff89dfad50ca60 R12: 0000000000000007 [ 846.431838] R13: ffff89dff5492800 R14: ffff89dfae3aa000 R15: ffff89dff4ff88d0 [ 846.431840] FS: 00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000 [ 846.431841] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.431842] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0 [ 846.431846] Call Trace: [ 846.431850] ? f2fs_find_entry+0x71/0x90 [ 846.431853] f2fs_lookup+0x1aa/0x390 [ 846.431856] __lookup_slow+0x97/0x150 [ 846.431858] lookup_slow+0x35/0x50 [ 846.431874] walk_component+0x1c6/0x470 [ 846.431878] ? memcg_kmem_charge_memcg+0x70/0x90 [ 846.431880] ? page_add_file_rmap+0x13/0x200 [ 846.431882] path_lookupat+0x76/0x230 [ 846.431884] ? __alloc_pages_nodemask+0xfc/0x280 [ 846.431886] filename_lookup+0xb8/0x1a0 [ 846.431890] ? _cond_resched+0x16/0x40 [ 846.431891] ? kmem_cache_alloc+0x160/0x1d0 [ 846.431894] ? path_listxattr+0x41/0xa0 [ 846.431896] path_listxattr+0x41/0xa0 [ 846.431898] do_syscall_64+0x55/0x100 [ 846.431901] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 846.431902] RIP: 0033:0x7f882de1c0d7 [ 846.431903] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48 [ 846.431934] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2 [ 846.431936] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7 [ 846.431937] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0 [ 846.431939] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000 [ 846.431940] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550 [ 846.431941] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000 [ 846.431943] ---[ end trace abca54df39d14f5d ]--- [ 846.432033] F2FS-fs (loop0): access invalid blkaddr:1024 [ 846.432051] WARNING: CPU: 1 PID: 1249 at fs/f2fs/checkpoint.c:154 f2fs_is_valid_blkaddr+0x10f/0x160 [ 846.432051] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.432085] CPU: 1 PID: 1249 Comm: a.out Tainted: G W 4.18.0-rc3+ #1 [ 846.432086] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.432089] RIP: 0010:f2fs_is_valid_blkaddr+0x10f/0x160 [ 846.432089] Code: 00 eb ed 31 c0 83 fa 05 75 ae 48 83 ec 08 48 8b 3f 89 f1 48 c7 c2 fc 0b 0f 8b 48 c7 c6 8b d7 09 8b 88 44 24 07 e8 61 8b ff ff <0f> 0b 0f b6 44 24 07 48 83 c4 08 eb 81 4c 8b 47 10 8b 8f 38 04 00 [ 846.432120] RSP: 0018:ffff961c414a7900 EFLAGS: 00010286 [ 846.432122] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000006 [ 846.432123] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff89dfffd165d0 [ 846.432124] RBP: ffff89dff5492800 R08: 0000000000000001 R09: 000000000000029d [ 846.432125] R10: ffff961c414a7820 R11: 000000000000029d R12: 0000000000000400 [ 846.432126] R13: 0000000000000000 R14: ffff89dff4ff88d0 R15: 0000000000000000 [ 846.432128] FS: 00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000 [ 846.432130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.432131] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0 [ 846.432135] Call Trace: [ 846.432151] f2fs_wait_on_block_writeback+0x20/0x110 [ 846.432158] f2fs_grab_read_bio+0xbc/0xe0 [ 846.432161] f2fs_submit_page_read+0x21/0x280 [ 846.432163] f2fs_get_read_data_page+0xb7/0x3c0 [ 846.432165] f2fs_get_lock_data_page+0x29/0x1e0 [ 846.432167] f2fs_get_new_data_page+0x148/0x550 [ 846.432170] f2fs_add_regular_entry+0x1d2/0x550 [ 846.432178] ? __switch_to+0x12f/0x460 [ 846.432181] f2fs_add_dentry+0x6a/0xd0 [ 846.432184] f2fs_do_add_link+0xe9/0x140 [ 846.432186] __recover_dot_dentries+0x260/0x280 [ 846.432189] f2fs_lookup+0x343/0x390 [ 846.432193] __lookup_slow+0x97/0x150 [ 846.432195] lookup_slow+0x35/0x50 [ 846.432208] walk_component+0x1c6/0x470 [ 846.432212] ? memcg_kmem_charge_memcg+0x70/0x90 [ 846.432215] ? page_add_file_rmap+0x13/0x200 [ 846.432217] path_lookupat+0x76/0x230 [ 846.432219] ? __alloc_pages_nodemask+0xfc/0x280 [ 846.432221] filename_lookup+0xb8/0x1a0 [ 846.432224] ? _cond_resched+0x16/0x40 [ 846.432226] ? kmem_cache_alloc+0x160/0x1d0 [ 846.432228] ? path_listxattr+0x41/0xa0 [ 846.432230] path_listxattr+0x41/0xa0 [ 846.432233] do_syscall_64+0x55/0x100 [ 846.432235] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 846.432237] RIP: 0033:0x7f882de1c0d7 [ 846.432237] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48 [ 846.432269] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2 [ 846.432271] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7 [ 846.432272] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0 [ 846.432273] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000 [ 846.432274] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550 [ 846.432275] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000 [ 846.432277] ---[ end trace abca54df39d14f5e ]--- [ 846.432279] F2FS-fs (loop0): invalid blkaddr: 1024, type: 5, run fsck to fix. [ 846.432376] WARNING: CPU: 1 PID: 1249 at fs/f2fs/f2fs.h:2697 f2fs_wait_on_block_writeback+0xb1/0x110 [ 846.432376] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.432410] CPU: 1 PID: 1249 Comm: a.out Tainted: G W 4.18.0-rc3+ #1 [ 846.432411] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.432413] RIP: 0010:f2fs_wait_on_block_writeback+0xb1/0x110 [ 846.432414] Code: 66 90 f0 ff 4b 34 74 59 5b 5d c3 48 8b 7d 00 41 b8 05 00 00 00 89 d9 48 c7 c2 d8 e8 0e 8b 48 c7 c6 1d b0 0a 8b e8 df bc fd ff <0f> 0b f0 80 4d 48 04 e9 67 ff ff ff 48 8b 03 48 c1 e8 37 83 e0 07 [ 846.432445] RSP: 0018:ffff961c414a7910 EFLAGS: 00010286 [ 846.432447] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000006 [ 846.432448] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffff89dfffd165d0 [ 846.432449] RBP: ffff89dff5492800 R08: 0000000000000000 R09: 00000000000002d1 [ 846.432450] R10: ffff961c414a7820 R11: ffff89dfad50cf80 R12: 0000000000000400 [ 846.432451] R13: 0000000000000000 R14: ffff89dff4ff88d0 R15: 0000000000000000 [ 846.432453] FS: 00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000 [ 846.432454] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.432455] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0 [ 846.432459] Call Trace: [ 846.432463] f2fs_grab_read_bio+0xbc/0xe0 [ 846.432464] f2fs_submit_page_read+0x21/0x280 [ 846.432466] f2fs_get_read_data_page+0xb7/0x3c0 [ 846.432468] f2fs_get_lock_data_page+0x29/0x1e0 [ 846.432470] f2fs_get_new_data_page+0x148/0x550 [ 846.432473] f2fs_add_regular_entry+0x1d2/0x550 [ 846.432475] ? __switch_to+0x12f/0x460 [ 846.432477] f2fs_add_dentry+0x6a/0xd0 [ 846.432480] f2fs_do_add_link+0xe9/0x140 [ 846.432483] __recover_dot_dentries+0x260/0x280 [ 846.432485] f2fs_lookup+0x343/0x390 [ 846.432488] __lookup_slow+0x97/0x150 [ 846.432490] lookup_slow+0x35/0x50 [ 846.432505] walk_component+0x1c6/0x470 [ 846.432509] ? memcg_kmem_charge_memcg+0x70/0x90 [ 846.432511] ? page_add_file_rmap+0x13/0x200 [ 846.432513] path_lookupat+0x76/0x230 [ 846.432515] ? __alloc_pages_nodemask+0xfc/0x280 [ 846.432517] filename_lookup+0xb8/0x1a0 [ 846.432520] ? _cond_resched+0x16/0x40 [ 846.432522] ? kmem_cache_alloc+0x160/0x1d0 [ 846.432525] ? path_listxattr+0x41/0xa0 [ 846.432526] path_listxattr+0x41/0xa0 [ 846.432529] do_syscall_64+0x55/0x100 [ 846.432531] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 846.432533] RIP: 0033:0x7f882de1c0d7 [ 846.432533] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48 [ 846.432565] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2 [ 846.432567] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7 [ 846.432568] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0 [ 846.432569] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000 [ 846.432570] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550 [ 846.432571] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000 [ 846.432573] ---[ end trace abca54df39d14f5f ]--- [ 846.434280] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 846.434424] PGD 80000001ebd3a067 P4D 80000001ebd3a067 PUD 1eb1ae067 PMD 0 [ 846.434551] Oops: 0000 [#1] SMP PTI [ 846.434697] CPU: 0 PID: 44 Comm: kworker/u5:0 Tainted: G W 4.18.0-rc3+ #1 [ 846.434805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.435000] Workqueue: fscrypt_read_queue decrypt_work [ 846.435174] RIP: 0010:fscrypt_do_page_crypto+0x6e/0x2d0 [ 846.435351] Code: 00 65 48 8b 04 25 28 00 00 00 48 89 84 24 88 00 00 00 31 c0 e8 43 c2 e0 ff 49 8b 86 48 02 00 00 85 ed c7 44 24 70 00 00 00 00 <48> 8b 58 08 0f 84 14 02 00 00 48 8b 78 10 48 8b 0c 24 48 c7 84 24 [ 846.435696] RSP: 0018:ffff961c40f9bd60 EFLAGS: 00010206 [ 846.435870] RAX: 0000000000000000 RBX: ffffc5f787719b80 RCX: ffffc5f787719b80 [ 846.436051] RDX: ffffffff8b9f4b88 RSI: ffffffff8b0ae622 RDI: ffff961c40f9bdb8 [ 846.436261] RBP: 0000000000001000 R08: ffffc5f787719b80 R09: 0000000000001000 [ 846.436433] R10: 0000000000000018 R11: fefefefefefefeff R12: ffffc5f787719b80 [ 846.436562] R13: ffffc5f787719b80 R14: ffff89dff4ff88d0 R15: 0ffff89dfaddee60 [ 846.436658] FS: 0000000000000000(0000) GS:ffff89dfffc00000(0000) knlGS:0000000000000000 [ 846.436758] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.436898] CR2: 0000000000000008 CR3: 00000001eddd0000 CR4: 00000000000006f0 [ 846.437001] Call Trace: [ 846.437181] ? check_preempt_wakeup+0xf2/0x230 [ 846.437276] ? check_preempt_curr+0x7c/0x90 [ 846.437370] fscrypt_decrypt_page+0x48/0x4d [ 846.437466] __fscrypt_decrypt_bio+0x5b/0x90 [ 846.437542] decrypt_work+0x12/0x20 [ 846.437651] process_one_work+0x15e/0x3d0 [ 846.437740] worker_thread+0x4c/0x440 [ 846.437848] kthread+0xf8/0x130 [ 846.437938] ? rescuer_thread+0x350/0x350 [ 846.438022] ? kthread_associate_blkcg+0x90/0x90 [ 846.438117] ret_from_fork+0x35/0x40 [ 846.438201] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.438653] CR2: 0000000000000008 [ 846.438713] ---[ end trace abca54df39d14f60 ]--- [ 846.438796] RIP: 0010:fscrypt_do_page_crypto+0x6e/0x2d0 [ 846.438844] Code: 00 65 48 8b 04 25 28 00 00 00 48 89 84 24 88 00 00 00 31 c0 e8 43 c2 e0 ff 49 8b 86 48 02 00 00 85 ed c7 44 24 70 00 00 00 00 <48> 8b 58 08 0f 84 14 02 00 00 48 8b 78 10 48 8b 0c 24 48 c7 84 24 [ 846.439084] RSP: 0018:ffff961c40f9bd60 EFLAGS: 00010206 [ 846.439176] RAX: 0000000000000000 RBX: ffffc5f787719b80 RCX: ffffc5f787719b80 [ 846.440927] RDX: ffffffff8b9f4b88 RSI: ffffffff8b0ae622 RDI: ffff961c40f9bdb8 [ 846.442083] RBP: 0000000000001000 R08: ffffc5f787719b80 R09: 0000000000001000 [ 846.443284] R10: 0000000000000018 R11: fefefefefefefeff R12: ffffc5f787719b80 [ 846.444448] R13: ffffc5f787719b80 R14: ffff89dff4ff88d0 R15: 0ffff89dfaddee60 [ 846.445558] FS: 0000000000000000(0000) GS:ffff89dfffc00000(0000) knlGS:0000000000000000 [ 846.446687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.447796] CR2: 0000000000000008 CR3: 00000001eddd0000 CR4: 00000000000006f0 - Location https://elixir.bootlin.com/linux/v4.18-rc4/source/fs/crypto/crypto.c#L149 struct crypto_skcipher *tfm = ci->ci_ctfm; Here ci can be NULL Note that this issue maybe require CONFIG_F2FS_FS_ENCRYPTION=y to reproduce. Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by:
-
Jaegeuk Kim authored
commit 89d13c38 upstream. This patch fixes missing up_read call. Fixes: c9b60788 ("f2fs: fix to do sanity check with block address in main area") Reviewed-by:
-
