- 27 Aug, 2011 2 commits
-
-
Jason Gerecke authored
The Wacom PenPartner should advertise its stylus tip and button in addition to the eraser tool. These are both physically present on the hardware, and emitted from 'wacom_penpartner_irq'. Signed-off-by:
Jason Gerecke <killertofu@gmail.com> Reviewed-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru>
-
Ping Cheng authored
Touch devices do not report valid pressure or capacitance. Signed-off-by:
-
- 22 Aug, 2011 4 commits
-
-
Michael Hennerich authored
The interrupt status registers should be read in row to avoid invalid data. Alter "read" method for both bus options to allow reading several registers in a row and make sure we read interrupt status registers properly. Read sequence saves 50% of bus transactions compared to single register reads. So use it also for the result registers, which are also located in a row. Also update copyright notice. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Dmitry Torokhov authored
spi_write() requires use of DMA-safe (cacheline aligned) buffers. Also use the same buffers when reading data since to avoid extra locking and potential memory allocation in spi_write_then_read(). Acked-by:
-
Michael Hennerich authored
Allow driver to be used on Big Endian boxes. Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
- 21 Aug, 2011 2 commits
-
-
Axel Lin authored
ep93xx_keypad.c uses interfaces from linux/module.h, so it should include that file. This patch fixes build errors. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
-
Axel Lin authored
tnetv107x-ts.c uses interfaces from linux/module.h, so it should include that file. This patch fixes build errors. Signed-off-by:
-
- 20 Aug, 2011 1 commit
-
-
Jiejing Zhang authored
The original license statement was confusing since it was unclear if the license was pure GPLv2 or GPLv2+ and did not match the license of the driver max11801_ts was derived from. The license is GPLv2+. Signed-off-by:
Jiejing Zhang <jiejing.zhang@freescale.com> Signed-off-by:
-
- 17 Aug, 2011 2 commits
-
-
Yufeng Shen authored
Atmel mxt1386 touch controller has the touch pressure information so let's report it to the user space. [dtor@mail.ru: added ABS_RESSURE reporting for ST emulation.] Signed-off-by:
Yufeng Shen <miletus@chromium.org> Acked-by:
Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
-
Andrew Drake authored
New MacBook Pro devices reporting product name MacBookPro8,2 come with newer/higher resolution touchpads than others with the same product name with USB ID 05ac:0252. This patch adds support for these devices. Signed-off-by:
Andrew Drake <adrake@adrake.org> Reviewed-by:
-
- 16 Aug, 2011 3 commits
-
-
Ping Cheng authored
Signed-off-by:
-
Ping Cheng authored
Use WAC_MSG_RETRIES define instead of a numeric constant. Signed-off-by:
-
Gerard Braad authored
Signed-off-by:
Gerard Braad <me@gbraad.nl> Reviewed-by:
Chris Bagwell <chris@cnpbagwell.com> Signed-off-by:
-
- 11 Aug, 2011 2 commits
-
-
Axel Lin authored
If kzalloc for kbc fails, then we have NULL pointer dereference while calling input_free_device(kbc->idev) in the error handling. So it is safer to always use the original name, input_dev. Signed-off-by:
-
Axel Lin authored
input_free_device() should be used if input_register_device() was not called yet or if it failed. Signed-off-by:
-
- 09 Aug, 2011 2 commits
-
-
Joshua V. Dillon authored
Added USB device IDs for MacBookAir4,2 trackpad. Device constants were copied from the MacBookAir3,2 constants. The 4,2 device specification is reportedly unchanged from the 3,2 predecessor and seems to work well. Signed-off-by:
Joshua V Dillon <jvdillon@gmail.com> Signed-off-by:
Chase Douglas <chase.douglas@canonical.com> Signed-off-by:
-
Axel Lin authored
The module device table for of_device_id should use "of" type. Signed-off-by:
-
- 05 Aug, 2011 1 commit
-
-
Deepak Saxena authored
The analog joystick driver is written for x86 systems. This patch updates it to use the PIT_TICK_RATE value instead of CLOCK_TICK_RATE as they are equivalent on x86 and we want to deprecate the latter. Signed-off-by:
Deepak Saxena <dsaxena@linaro.org> Signed-off-by:
-
- 03 Aug, 2011 2 commits
-
-
Michael Hennerich authored
Input close or device disable should not interact with the exported gpiolib functionality. However that's the case. __ad7879_disable() clears the entire AD7879_REG_CTRL2, while it should just power down the ADC and its reference. Signed-off-by:
-
Tobias Klauser authored
Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
- 01 Aug, 2011 1 commit
-
-
Shawn Guo authored
It adds device tree probe support for mma8450 driver. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Acked-by:
Eric Miao <eric.miao@linaro.org> Acked-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
- 30 Jul, 2011 5 commits
-
-
Tobias Klauser authored
Return -ENOMEM if kzalloc fails in gpio_keys_get_devtree_pdata(). Signed-off-by:
-
Axel Lin authored
Add missing device_remove_file() for dev_attr_time in lm8323_remove(). Also calling device_remove_file() in lm8323_probe() error path to remove sysfs attribute file. Signed-off-by:
-
Rakesh Iyer authored
Fix a constant definition and computation of polling time. [dtor@mail.ru: switched to using DIV_ROUND_UP as was suggested by Thierry Reding <thierry.reding@avionic-design.de>] Signed-off-by:
Rakesh Iyer <riyer@nvidia.com> Signed-off-by:
-
Stephen Rothwell authored
We need to explicitly include module.h since some of its facilities are used. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Randy Dunlap authored
hgpk.c uses interfaces from linux/module.h, so it should include that file. This fixes build errors. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
- 27 Jul, 2011 1 commit
-
-
Dmitry Torokhov authored
-
- 25 Jul, 2011 2 commits
-
-
Dmitry Torokhov authored
We were testing wrong bit in the extended capability query. Reported-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
-
Rakesh Iyer authored
To support key repeats, keyboard needs to be setup as an autorepeating device. Signed-off-by:
-
- 20 Jul, 2011 2 commits
-
-
Dan Carpenter authored
According to the comments we want to call mutex_lock() here instead of mutex_unlock(). That makes more sense. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
We are testing the wrong variable here. I believe tj9->input_dev is always NULL at this point, so probe() will fail. Signed-off-by:
-
- 19 Jul, 2011 4 commits
-
-
Axel Lin authored
The implementation does break from the for loop after we assign 'i' to variable 'found'. Signed-off-by:
-
Axel Lin authored
It's not referenced outside this file so there's no need for it to be in the global name space. Signed-off-by:
-
Axel Lin authored
Make sure we are passing the same cookie in all calls to request_any_context_irq() and free_irq(). Signed-off-by:
-
Axel Lin authored
The implementation in cy8ctmg110_probe() does not properly set reset_pin and irq_pin from platform data. Let's fix it. Signed-off-by:
-
- 13 Jul, 2011 4 commits
-
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
i2c_master_send returns negative errno, or else the number of bytes written. Signed-off-by:
-
Axel Lin authored
We only care about if there is a successful match from the table (or no match at all), so let's make dmi_check_system return immediately instead of iterating thorough the whole table. Signed-off-by:
-
Axel Lin authored
We only care about if there is a successful match from the table (or no match at all), so let's make dmi_check_system return immediately instead of iterating thorough the whole table. Make the dmi callback function return 1 then dmi_check_system will return immediately if we have a successful match. Signed-off-by:
-
