- 08 Aug, 2013 27 commits
-
-
Ville Syrjälä authored
Let's call hsw_lp_wm_result intel_wm_level from now on and move it to i915_drv.h for later use. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Refactor the code a bit to split the watermark level validity check into a separate function. Also add hack there that allows us to use it even for LP0 watermarks. ATM we don't pre-compute/check the LP0 watermarks, so we just have to clamp them to the maximum and hope things work out. v2: Add some debug prints when we exceed max WM0 Kill pointless ret = false' assignment. Include the check for the already disabled 'result' which got shuffled around when the patchs got reorderd Signed-off-by: -
Ben Widawsky authored
With the current code there shouldn't be a distinction - however with an upcoming change we intend to allocate a vma much earlier, before it's actually bound anywhere. To do this we have to check node allocation as well for the _bound() check. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> [danvet: move list_del(&vma->vma_link) from vma_unbind to vma_destroy, again fallout from the loss of "rm/i915: Cleanup more of VMA in destroy".] Signed-off-by:
-
Ben Widawsky authored
formerly: "drm/i915: Create VMAs (part 4) - Error capture" Since the active/inactive lists are per VM, we need to modify the error capture code to be aware of this, and also extend it to capture the buffers from all the VMs. For now all the code assumes only 1 VM, but it will become more generic over the next few patches. NOTE: If the number of VMs in a real world system grows significantly we'll have to focus on only capturing the guilty VM, or else it's likely there won't be enough space for error capture. v2: Squashed in the "part 6" which had dependencies on the mm_list change. Since I've moved the mm_list change to an earlier point in the series, we were able to accomplish it here and now. v3: Rebased over new error capture Signed-off-by:
-
Ben Widawsky authored
formerly: "drm/i915: Create VMAs (part 5) - move mm_list" The mm_list is used for the active/inactive LRUs. Since those LRUs are per address space, the link should be per VMx . Because we'll only ever have 1 VMA before this point, it's not incorrect to defer this change until this point in the patch series, and doing it here makes the change much easier to understand. Shamelessly manipulated out of Daniel: "active/inactive stuff is used by eviction when we run out of address space, so needs to be per-vma and per-address space. Bound/unbound otoh is used by the shrinker which only cares about the amount of memory used and not one bit about in which address space this memory is all used in. Of course to actual kick out an object we need to unbind it from every address space, but for that we have the per-object list of vmas." v2: only bump GGTT LRU in i915_gem_object_set_to_gtt_domain (Chris) v3: Moved earlier in the series v4: Add dropped message from v3 Signed-off-by:
-
Ben Widawsky authored
formerly: "drm/i915: Create VMAs (part 3.5) - map and fenceable tracking" The map_and_fenceable tracking is per object. GTT mapping, and fences only apply to global GTT. As such, object operations which are not performed on the global GTT should not effect mappable or fenceable characteristics. Functionally, this commit could very well be squashed in to a previous patch which updated object operations to take a VM argument. This commit is split out because it's a bit tricky (or at least it was for me). Signed-off-by:
-
Ville Syrjälä authored
drivers/gpu/drm/i915/i915_debugfs.c:2136:3: warning: symbol 'i915_debugfs_files' was not declared. Should it be static? Signed-off-by:
-
Ville Syrjälä authored
We're going to use the 1/2 vs. 5/6 split option already on IVB so the HSW name is not proper. Just give it an intel_ prefix and move it to i915_drv.h so that we can use it there later. Signed-off-by:
-
Ville Syrjälä authored
We don't need to store the FBC WM enabled status in each watermark level. We anyway have to reduce it down to a single boolean, so just delay checking the FBC WM limit until we're computing the final value. Signed-off-by:
-
Ville Syrjälä authored
Refactor the watermarks computation for one level to a separate function. This function will now set the ->enable flag to true, even if the watermark level wasn't actually checked yet. In the future we will delay the checking so we must consider all unchecked watermarks as possibly valid. v2: Preserve comment about latency units Signed-off-by:
-
Ville Syrjälä authored
Let's be consistent and always call our variables 'enabled' insted of the occasional 'enable'. Signed-off-by:
-
Damien Lespiau authored
set_frame() wraps the write_frame() vfunc. Be consistent and name the wrapping function like the vfunc being called. It's doubly confusing as we also have a set_infoframes() vfunc and set_infoframe() doesn't wrap it. Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Damien Lespiau authored
I cannot find any evidence what we shouldn't try to set those fields when setting a non-CEA mode on an HDMI sink. So just kill that return. Suggested-by:
Dave Airlie <airlied@gmail.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Damien Lespiau authored
Suggested-by:
-
Damien Lespiau authored
All the HDMI infoframe code has been ported to use video/hdmi.c, so it's time to say bye bye to this code. Reviewed-by:
-
Damien Lespiau authored
Reviewed-by:
-
Damien Lespiau authored
Let's use the drivers/video/hmdi.c and drm infoframe helpers to build our infoframes. v2: Simplify the logic to compute the buffer size. We can just take the maximum infoframe size rounded to 32, which happens to be what the hardware let us write anyway. v3: Remove unnecessary memset() (Ville Syrjälä) Signed-off-by:
-
Damien Lespiau authored
First step in the move to the shared infoframe infrastructure, let's move the different infoframe helpers and the write_infoframe() vfunc to a type (enum hdmi_infoframe_type) and a buffer + len instead of using our struct dip_infoframe. v2: constify the infoframe pointer and don't mix signs (Ville Syrjälä) Signed-off-by:
-
Damien Lespiau authored
From CEA-861: Data Byte 1, bit A0 indicates whether Active Format Data is present in Data Byte 2 bits R3 through R0. A source device shall set A0=1 when any of the AFD bits are set. ie. if we want to set active_aspect, we need to set the active_info_valid bit to 1 as well. Cc: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by:
-
Damien Lespiau authored
If the user if this API is providing a bigger buffer than the infoframe size, it could be for a could reason. For instance it could be because it gives the buffer that will be written to the hardware, up to the maximum of an infoframe size. Instead of just zeroing up to the infoframe size, let's zero the whole incoming buffer as those extra bytes are also used to compute the ECC and need to be 0. Signed-off-by:
-
Damien Lespiau authored
Cc: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by:
-
Damien Lespiau authored
And a way to pack hdmi_infoframe generically. Cc: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by:
-
Damien Lespiau authored
Cc: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by:
-
Ben Widawsky authored
In some places, we want to know if an object is bound in any address space, and not just the global GTT. This often applies when there is a single global resource (object, pages, etc.) function | reason -------------------------------------------------- i915_gem_object_is_inactive | global object i915_gem_object_put_pages | object's pages 915_gem_object_unpin | global object i915_gem_execbuffer_unreserve_object | temporary until we plumb vma pread/pwrite | see the note below Note: set_to_gtt_domain in pwrite/pread is abused as a wait_rendering call - but that once only worked if the object is bound. We really should replace this with a plain wait_rendering call, which would have the upside that in pread it would be clearer that we actually only wait for oustanding gpu writes. Signed-off-by:
-
Ben Widawsky authored
Eviction code, like the rest of the converted code needs to be aware of the address space for which it is evicting (or the everything case, all addresses). With the updated bind/unbind interfaces of the last patch, we can now safely move the eviction code over. Signed-off-by:
-
Ben Widawsky authored
As alluded to in several patches, and it will be reiterated later... A VMA is an abstraction for a GEM BO bound into an address space. Therefore it stands to reason, that the existing bind, and unbind are the ones which will be the most impacted. This patch implements this, and updates all callers which weren't already updated in the series (because it was too messy). This patch represents the bulk of an earlier, larger patch. I've pulled out a bunch of things by the request of Daniel. The history is preserved for posterity with the email convention of ">" One big change from the original patch aside from a bunch of cropping is I've created an i915_vma_unbind() function. That is because we always have the VMA anyway, and doing an extra lookup is useful. There is a caveat, we retain an i915_gem_object_ggtt_unbind, for the global cases which might not talk in VMAs. > drm/i915: plumb VM into object operations > > This patch was formerly known as: > "drm/i915: Create VMAs (part 3) - plumbing" > > This patch adds a VM argument, bind/unbind, and the object > offset/size/color getters/setters. It preserves the old ggtt helper > functions because things still need, and will continue to need them. > > Some code will still need to be ported over after this. > > v2: Fix purge to pick an object and unbind all vmas > This was doable because of the global bound list change. > > v3: With the commit to actually pin/unpin pages in place, there is no > longer a need to check if unbind succeeded before calling put_pages(). > Make put_pages only BUG() after checking pin count. > > v4: Rebased on top of the new hangcheck work by Mika > plumbed eb_destroy also > Many checkpatch related fixes > > v5: Very large rebase > > v6: > Change BUG_ON to WARN_ON (Daniel) > Rename vm to ggtt in preallocate stolen, since it is always ggtt when > dealing with stolen memory. (Daniel) > list_for_each will short-circuit already (Daniel) > remove superflous space (Daniel) > Use per object list of vmas (Daniel) > Make obj_bound_any() use obj_bound for each vm (Ben) > s/bind_to_gtt/bind_to_vm/ (Ben) > > Fixed up the inactive shrinker. As Daniel noticed the code could > potentially count the same object multiple times. While it's not > possible in the current case, since 1 object can only ever be bound into > 1 address space thus far - we may as well try to get something more > future proof in place now. With a prep patch before this to switch over > to using the bound list + inactive check, we're now able to carry that > forward for every address space an object is bound into. Signed-off-by:
-
Ben Widawsky authored
In order to do this for all VMs, it's convenient to rework the logic a bit. This should have no functional impact. Signed-off-by:
-
- 06 Aug, 2013 5 commits
-
-
Ben Widawsky authored
Signed-off-by:
-
Chris Wilson authored
Rather than open-code the teardown of a framebuffer, export the routine from intel_display.c. This then make intel_fbdev symmetric in its use of the common intel_framebuffer routines to initialise and clean up the struct intel_framebuffer. (And new features need only be added in one location!) Signed-off-by:
-
Chris Wilson authored
MLC_LLC was never validated for Sandybridge and was superseded by a new level of cacheing for the GPU in Ivybridge. Update our names to be consistent with usage, and in the process stop setting the unwanted bit on Sandybridge. Signed-off-by:
-
Paulo Zanoni authored
We set the mode based on the port, and we already pass the port as an argument. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Paulo Zanoni authored
These messages are not really useful since it's very easy to check which mode is used for each port: The values programmed are based on the port type, then assigned to the ddi_translations variable. Currently we use DP mode for ports A-D and FDI mode for port E. Also, when we add the code to enable/disable PC8+, intel_prepare_ddi_buffers will be called more often and will eat your dmesg buffers. While at it, fix the coding style of the "for" statement above. Signed-off-by:
-
- 05 Aug, 2013 8 commits
-
-
Ben Widawsky authored
The code itself is no longer accurate without updating once we have multiple address space since clearing the domains of every object requires scanning the inactive list for all VMs. "This code is dead. Just remove it rather than port it to vma." - Chris Wilson Recommended-by:
Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by:
-
Ville Syrjälä authored
All the ILK+ WM compute functions take the latency values in 0.1us units. Add a few comments to remind people about that. Signed-off-by:
-
Ville Syrjälä authored
Adjust the current ILK/SNB/IVB watermark codepaths to use the pre-populated latency values from dev_priv instead of reading them out from the registers every time. Signed-off-by:
-
Ville Syrjälä authored
Return UINT_MAX for the calculated WM level if the latency is zero. This will lead to marking the WM level as disabled. I'm not sure if latency==0 should mean that we want to disable the level. But that's the implication I got from the fact that we don't even enable the watermark code of the SSKDP register is 0. v2: Use WARN() to scare people Signed-off-by:
-
Ville Syrjälä authored
Seeing the watermark latency values in dmesg might help sometimes. v2: Use DRM_ERROR() when expected latency values are missing Note: We might hit the DRM_ERROR added in this patch and apparently there's not much we can do about that. But I think it'd be interesting to figure out whether that actually happens in the real world, so I didn't apply a s/DRM_ERROR/DRM_DEBUG_KMS/ bikeshed while applying. Signed-off-by:
-
Ville Syrjälä authored
Rather than pass around the plane latencies, just grab them from dev_priv nearer to where they're needed. Do the same for cursor latencies. v2: Add some comments about latency units Signed-off-by:
-
Ville Syrjälä authored
Rather than having to read the latency values out every time, just store them in dev_priv. On ILK and IVB there is a difference between some of the latency values for different planes, so store the latency values for each plane type separately, and apply the necesary fixups during init. v2: Fix some checkpatch complaints Signed-off-by:
-
Ville Syrjälä authored
ILK has a slightly different way to read out the watermark latency values. On ILK the LP0 latenciy values are in fact not stored in any register, and instead we must use fixed values. Signed-off-by:
-
