- 06 Aug, 2018 40 commits
-
-
Brad Love authored
[ Upstream commit 0cc4655c ] This issue was reported by a user who downloaded a corrupt saa7164 firmware, then went looking for a valid xc5000 firmware to fix the error displayed...but the device in question has no xc5000, thus after much effort, the wild goose chase eventually led to a support call. The xc5000 has nothing to do with saa7164 (as far as I can tell), so replace the string with saa7164 as well as give a meaningful hint on the firmware mismatch. Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Damien Le Moal authored
[ Upstream commit 804689ad ] For failed commands with valid sense data (e.g. NCQ commands), scsi_check_sense() is used in ata_analyze_tf() to determine if the command can be retried. In such case, rely on this decision and ignore the command error mask based decision done in ata_worth_retry(). This fixes useless retries of commands such as unaligned writes on zoned disks (TYPE_ZAC). Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 43d0d3c5 ] Add the missing clk_disable_unprepare() before return from jpu_open() in the software reset error handling case. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 8a22a3e1 ] Inclusion of include/dma-iommu.h when CONFIG_IOMMU_DMA is not selected results in the following splat: In file included from drivers/irqchip/irq-gic-v3-mbi.c:20:0: ./include/linux/dma-iommu.h:95:69: error: unknown type name ‘dma_addr_t’ static inline int iommu_get_msi_cookie(struct iommu_domain *domain, dma_addr_t base) ^~~~~~~~~~ ./include/linux/dma-iommu.h:108:74: warning: ‘struct list_head’ declared inside parameter list will not be visible outside of this definition or declaration static inline void iommu_dma_get_resv_regions(struct device *dev, struct list_head *list) ^~~~~~~~~ scripts/Makefile.build:312: recipe for target 'drivers/irqchip/irq-gic-v3-mbi.o' failed Fix it by including linux/types.h. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20180508121438.11301-5-marc.zyngier@arm.comSigned-off-by:
-
DaeRyong Jeong authored
[ Upstream commit b6da31b2 ] Unlike normal serials, in pty layer, there is no guarantee that multiple threads don't insert input characters at the same time. If it is happened, tty_insert_flip_string_fixed_flag can be executed concurrently. This can lead slab out-of-bounds write in tty_insert_flip_string_fixed_flag. Call sequences are as follows. CPU0 CPU1 n_tty_ioctl_helper n_tty_ioctl_helper __start_tty tty_send_xchar tty_wakeup pty_write n_hdlc_tty_wakeup tty_insert_flip_string n_hdlc_send_frames tty_insert_flip_string_fixed_flag pty_write tty_insert_flip_string tty_insert_flip_string_fixed_flag To fix the race, acquire port->lock in pty_write() before it inserts input characters to tty buffer. It prevents multiple threads from inserting input characters concurrently. The crash log is as follows: BUG: KASAN: slab-out-of-bounds in tty_insert_flip_string_fixed_flag+0xb5/ 0x130 drivers/tty/tty_buffer.c:316 at addr ffff880114fcc121 Write of size 1792 by task syz-executor0/30017 CPU: 1 PID: 30017 Comm: syz-executor0 Not tainted 4.8.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 0000000000000000 ffff88011638f888 ffffffff81694cc3 ffff88007d802140 ffff880114fcb300 ffff880114fcc300 ffff880114fcb300 ffff88011638f8b0 ffffffff8130075c ffff88011638f940 ffff88007d802140 ffff880194fcc121 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xb3/0x110 lib/dump_stack.c:51 kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 print_address_description mm/kasan/report.c:194 [inline] kasan_report_error+0x1f7/0x4e0 mm/kasan/report.c:283 kasan_report+0x36/0x40 mm/kasan/report.c:303 check_memory_region_inline mm/kasan/kasan.c:292 [inline] check_memory_region+0x13e/0x1a0 mm/kasan/kasan.c:299 memcpy+0x37/0x50 mm/kasan/kasan.c:335 tty_insert_flip_string_fixed_flag+0xb5/0x130 drivers/tty/tty_buffer.c:316 tty_insert_flip_string include/linux/tty_flip.h:35 [inline] pty_write+0x7f/0xc0 drivers/tty/pty.c:115 n_hdlc_send_frames+0x1d4/0x3b0 drivers/tty/n_hdlc.c:419 n_hdlc_tty_wakeup+0x73/0xa0 drivers/tty/n_hdlc.c:496 tty_wakeup+0x92/0xb0 drivers/tty/tty_io.c:601 __start_tty.part.26+0x66/0x70 drivers/tty/tty_io.c:1018 __start_tty+0x34/0x40 drivers/tty/tty_io.c:1013 n_tty_ioctl_helper+0x146/0x1e0 drivers/tty/tty_ioctl.c:1138 n_hdlc_tty_ioctl+0xb3/0x2b0 drivers/tty/n_hdlc.c:794 tty_ioctl+0xa85/0x16d0 drivers/tty/tty_io.c:2992 vfs_ioctl fs/ioctl.c:43 [inline] do_vfs_ioctl+0x13e/0xba0 fs/ioctl.c:679 SYSC_ioctl fs/ioctl.c:694 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685 entry_SYSCALL_64_fastpath+0x1f/0xbd Signed-off-by:
DaeRyong Jeong <threeearcat@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit b3a81b6c ] On many Chromebooks touch devices are multi-sourced; the components are electrically compatible and one can be freely swapped for another without changing the OS image or firmware. To avoid bunch of scary messages when device is not actually present in the system let's try testing basic communication with it and if there is no response terminate probe early with -ENXIO. Signed-off-by:
Dmitry Torokhov <dtor@chromium.org> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jonathan Neuschäfer authored
[ Upstream commit 9dcb3df4 ] The interrupt controller inside the Wii's Hollywood chip is connected to two masters, the "Broadway" PowerPC and the "Starlet" ARM926, each with their own interrupt status and mask registers. When booting the Wii with mini[1], interrupts from the SD card controller (IRQ 7) are handled by the ARM, because mini provides SD access over IPC. Linux however can't currently use or disable this IPC service, so both sides try to handle IRQ 7 without coordination. Let's instead make sure that all interrupts that are unmasked on the PPC side are masked on the ARM side; this will also make sure that Linux can properly talk to the SD card controller (and potentially other devices). If access to a device through IPC is desired in the future, interrupts from that device should not be handled by Linux directly. [1]: https://github.com/lewurm/miniSigned-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Luc Van Oostenryck authored
[ Upstream commit 7a47f20e ] The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Terry Junge authored
[ Upstream commit 37e376df ] Add a mapping for Push-To-Talk joystick trigger button. Tested on ChromeBox/ChromeBook with various Plantronics devices. Signed-off-by:
Terry Junge <terry.junge@plantronics.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 377a879d ] retire_capture_urb() may print warning messages when the given URB doesn't align, and this may flood the system log easily. Put the rate limit to the message for avoiding it. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1093485Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 7a2148df ] The current code decrements the timeout counter i and the end of each loop i is incremented, so the check for timeout will always be false and hence the timeout mechanism is just a dead code path. Potentially, if the RD_READY bit is not set, we could end up in an infinite loop. Fix this so the timeout starts from 1000 and decrements to zero, if at the end of the loop i is zero we have a timeout condition. Detected by CoverityScan, CID#1324008 ("Logically dead code") Fixes: ccfc97bd ("[media] smiapp: Add driver") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Yufen Yu authored
[ Upstream commit c42a0e26 ] We met NULL pointer BUG as follow: [ 151.760358] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060 [ 151.761340] PGD 80000001011eb067 P4D 80000001011eb067 PUD 1011ea067 PMD 0 [ 151.762039] Oops: 0000 [#1] SMP PTI [ 151.762406] Modules linked in: [ 151.762723] CPU: 2 PID: 3561 Comm: mdadm-test Kdump: loaded Not tainted 4.17.0-rc1+ #238 [ 151.763542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014 [ 151.764432] RIP: 0010:remove_and_add_spares.part.56+0x13c/0x3a0 [ 151.765061] RSP: 0018:ffffc90001d7fcd8 EFLAGS: 00010246 [ 151.765590] RAX: 0000000000000000 RBX: ffff88013601d600 RCX: 0000000000000000 [ 151.766306] RDX: 0000000000000000 RSI: ffff88013601d600 RDI: ffff880136187000 [ 151.767014] RBP: ffff880136187018 R08: 0000000000000003 R09: 0000000000000051 [ 151.767728] R10: ffffc90001d7fed8 R11: 0000000000000000 R12: ffff88013601d600 [ 151.768447] R13: ffff8801298b1300 R14: ffff880136187000 R15: 0000000000000000 [ 151.769160] FS: 00007f2624276700(0000) GS:ffff88013ae80000(0000) knlGS:0000000000000000 [ 151.769971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.770554] CR2: 0000000000000060 CR3: 0000000111aac000 CR4: 00000000000006e0 [ 151.771272] Call Trace: [ 151.771542] md_ioctl+0x1df2/0x1e10 [ 151.771906] ? __switch_to+0x129/0x440 [ 151.772295] ? __schedule+0x244/0x850 [ 151.772672] blkdev_ioctl+0x4bd/0x970 [ 151.773048] block_ioctl+0x39/0x40 [ 151.773402] do_vfs_ioctl+0xa4/0x610 [ 151.773770] ? dput.part.23+0x87/0x100 [ 151.774151] ksys_ioctl+0x70/0x80 [ 151.774493] __x64_sys_ioctl+0x16/0x20 [ 151.774877] do_syscall_64+0x5b/0x180 [ 151.775258] entry_SYSCALL_64_after_hwframe+0x44/0xa9 For raid6, when two disk of the array are offline, two spare disks can be added into the array. Before spare disks recovery completing, system reboot and mdadm thinks it is ok to restart the degraded array by md_ioctl(). Since disks in raid6 is not only_parity(), raid5_run() will abort, when there is no PPL feature or not setting 'start_dirty_degraded' parameter. Therefore, mddev->pers is NULL. But, mddev->raid_disks has been set and it will not be cleared when raid5_run abort. md_ioctl() can execute cmd 'HOT_REMOVE_DISK' to remove a disk by mdadm, which will cause NULL pointer dereference in remove_and_add_spares() finally. Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Anson Huang authored
[ Upstream commit 0b01fd3d ] If is_enabled() is not defined, regulator core will assume this regulator is already enabled, then it can NOT be really enabled after disabled. Based on Li Jun's patch from the NXP kernel tree. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 11d42c81 ] The error messages at sanity checks of memory pages tend to repeat too many times once when it hits, and without the rate limit, it may flood and become unreadable. Replace such messages with the *_ratelimited() variant. Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1093027Signed-off-by:
-
Maya Erez authored
[ Upstream commit 2e3611e9 ] The device can set the exception event bit in one of the response UPIU, for example to notify the need for urgent BKOPs operation. In such a case, the host driver calls ufshcd_exception_event_handler to handle this notification. When trying to check the exception event status (for finding the cause for the exception event), the device may be busy with additional SCSI commands handling and may not respond within the 100ms timeout. To prevent that, we need to block SCSI commands during handling of exception events and allow retransmissions of the query requests, in case of timeout. Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Asutosh Das <asutoshd@codeaurora.org> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Xinming Hu authored
[ Upstream commit 30bfce0b ] Correct snr/nr/rssi data index to avoid possible buffer underflow. Signed-off-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Mika Westerberg authored
[ Upstream commit 408fec36 ] Currently we request control of native PCIe hotplug unconditionally. Native PCIe hotplug events are handled by the pciehp driver, and if it is not enabled those events will be lost. Request control of native PCIe hotplug only if the pciehp driver is enabled, so we will actually handle native PCIe hotplug events. Suggested-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Julia Lawall authored
[ Upstream commit 21816364 ] The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child + of_node_put(child); ? break; ... } ... when != child // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit e4ccb1da ] New binutils generate the following warning AS arch/powerpc/kernel/head_8xx.o arch/powerpc/kernel/head_8xx.S: Assembler messages: arch/powerpc/kernel/head_8xx.S:916: Warning: invalid register expression This patch fixes it. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Mathieu Malaterre authored
[ Upstream commit 5a4b475c ] Since the value of x is never intended to be read, declare it with gcc attribute as unused. Fix warning treated as error with W=1: arch/powerpc/platforms/powermac/bootx_init.c:471:21: error: variable ‘x’ set but not used [-Werror=unused-but-set-variable] Suggested-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Mathieu Malaterre authored
[ Upstream commit f72cf3f1 ] Add a missing prototype for function `note_bootable_part` to silence a warning treated as error with W=1: arch/powerpc/platforms/powermac/setup.c:361:12: error: no previous prototype for ‘note_bootable_part’ [-Werror=missing-prototypes] Suggested-by:
-
Mathieu Malaterre authored
[ Upstream commit b87a358b ] Add a missing include <platforms/chrp/chrp.h>. These functions can all be static, make it so. Fix warnings treated as errors with W=1: arch/powerpc/platforms/chrp/time.c:41:13: error: no previous prototype for ‘chrp_time_init’ [-Werror=missing-prototypes] arch/powerpc/platforms/chrp/time.c:66:5: error: no previous prototype for ‘chrp_cmos_clock_read’ [-Werror=missing-prototypes] arch/powerpc/platforms/chrp/time.c:74:6: error: no previous prototype for ‘chrp_cmos_clock_write’ [-Werror=missing-prototypes] arch/powerpc/platforms/chrp/time.c:86:5: error: no previous prototype for ‘chrp_set_rtc_time’ [-Werror=missing-prototypes] arch/powerpc/platforms/chrp/time.c:130:6: error: no previous prototype for ‘chrp_get_rtc_time’ [-Werror=missing-prototypes] Signed-off-by:
-
Mathieu Malaterre authored
[ Upstream commit c89ca593 ] The header file <linux/syscalls.h> was missing from the includes. Fix the following warning, treated as error with W=1: arch/powerpc/kernel/pci_32.c:286:6: error: no previous prototype for ‘sys_pciconfig_iobase’ [-Werror=missing-prototypes] Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 699e2302 ] The country code is used by the ath to detect the ISO 3166-1 alpha-2 name and to select the correct conformance test limits (CTL) for a country. If the country isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this country are: * 2.4GHz: ETSI * 5GHz: FCC Signed-off-by:
Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 9c790f2d ] The country code is used by the ath to detect the ISO 3166-1 alpha-2 name and to select the correct conformance test limits (CTL) for a country. If the country isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this country are: * 2.4GHz: FCC * 5GHz: FCC Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 2a3169a5 ] The country code is used by the ath to detect the ISO 3166-1 alpha-2 name and to select the correct conformance test limits (CTL) for a country. If the country isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this country are: * 2.4GHz: ETSI * 5GHz: ETSI Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 667ddac5 ] The country code is used by the ath to detect the ISO 3166-1 alpha-2 name and to select the correct conformance test limits (CTL) for a country. If the country isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this country are: * 2.4GHz: ETSI * 5GHz: FCC Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 1ea3986a ] The country code is used by the ath to detect the ISO 3166-1 alpha-2 name and to select the correct conformance test limits (CTL) for a country. If the country isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this country are: * 2.4GHz: ETSI * 5GHz: FCC Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 4f183687 ] The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: FCC * 5GHz: FCC Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 9ba8df0c ] The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: ETSI Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 45faf6e0 ] The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: ETSI Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 01fb2994 ] The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: FCC Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 6f5cdfa8 ] Manipulating the enable_cnt behind the back of the driver will wreak complete havoc with the kernel state, so disallow it. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit ff3d27a0 ] Under the following case, qgroup rescan can double account cowed tree blocks: In this case, extent tree only has one tree block. - | transid=5 last committed=4 | btrfs_qgroup_rescan_worker() | |- btrfs_start_transaction() | | transid = 5 | |- qgroup_rescan_leaf() | |- btrfs_search_slot_for_read() on extent tree | Get the only extent tree block from commit root (transid = 4). | Scan it, set qgroup_rescan_progress to the last | EXTENT/META_ITEM + 1 | now qgroup_rescan_progress = A + 1. | | fs tree get CoWed, new tree block is at A + 16K | transid 5 get committed - | transid=6 last committed=5 | btrfs_qgroup_rescan_worker() | btrfs_qgroup_rescan_worker() | |- btrfs_start_transaction() | | transid = 5 | |- qgroup_rescan_leaf() | |- btrfs_search_slot_for_read() on extent tree | Get the only extent tree block from commit root (transid = 5). | scan it using qgroup_rescan_progress (A + 1). | found new tree block beyong A, and it's fs tree block, | account it to increase qgroup numbers. - In above case, tree block A, and tree block A + 16K get accounted twice, while qgroup rescan should stop when it already reach the last leaf, other than continue using its qgroup_rescan_progress. Such case could happen by just looping btrfs/017 and with some possibility it can hit such double qgroup accounting problem. Fix it by checking the path to determine if we should finish qgroup rescan, other than relying on next loop to exit. Reported-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
David Sterba authored
[ Upstream commit 3d3a2e61 ] Currently the code assumes that there's an implied barrier by the sequence of code preceding the wakeup, namely the mutex unlock. As Nikolay pointed out: I think this is wrong (not your code) but the original assumption that the RELEASE semantics provided by mutex_unlock is sufficient. According to memory-barriers.txt: Section 'LOCK ACQUISITION FUNCTIONS' states: (2) RELEASE operation implication: Memory operations issued before the RELEASE will be completed before the RELEASE operation has completed. Memory operations issued after the RELEASE *may* be completed before the RELEASE operation has completed. (I've bolded the may portion) The example given there: As an example, consider the following: *A = a; *B = b; ACQUIRE *C = c; *D = d; RELEASE *E = e; *F = f; The following sequence of events is acceptable: ACQUIRE, {*F,*A}, *E, {*C,*D}, *B, RELEASE So if we assume that *C is modifying the flag which the waitqueue is checking, and *E is the actual wakeup, then those accesses can be re-ordered... IMHO this code should be considered broken... Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit 90b2da89 ] When a buffer is queued or requeued in vb2_buffer_done, then don't call the finish memop. In this case the buffer is only returned to vb2, not to userspace. Calling 'finish' here will cause an unbalance when the queue is canceled, since the core will call the same memop again. Signed-off-by:
-
Eyal Reizer authored
[ Upstream commit 6e91d483 ] the wl pointer can be null In case only wlcore_sdio is probed while no WiLink module is successfully probed, as in the case of mounting a wl12xx module while using a device tree file configured with wl18xx related settings. In this case the system was crashing in wl1271_suspend() as platform device data is not set. Make sure wl the pointer is valid before using it. Signed-off-by:
Eyal Reizer <eyalr@ti.com> Signed-off-by:
-
Ganapathi Bhat authored
[ Upstream commit b817047a ] Race condition is observed during rmmod of mwifiex_usb: 1. The rmmod thread will call mwifiex_usb_disconnect(), download SHUTDOWN command and do wait_event_interruptible_timeout(), waiting for response. 2. The main thread will handle the response and will do a wake_up_interruptible(), unblocking rmmod thread. 3. On getting unblocked, rmmod thread will make rx_cmd.urb = NULL in mwifiex_usb_free(). 4. The main thread will try to resubmit rx_cmd.urb in mwifiex_usb_submit_rx_urb(), which is NULL. To fix, wait for main thread to complete before calling mwifiex_usb_free(). Signed-off-by:
Ganapathi Bhat <gbhat@marvell.com> Signed-off-by:
-
Vincent Palatin authored
[ Upstream commit 0dbbf255 ] If we cannot communicate with the EC chip to detect the protocol version and its features, it's very likely useless to continue. Else we will commit all kind of uninformed mistakes (using the wrong protocol, the wrong buffer size, mixing the EC with other chips). Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> Acked-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Gwendal Grignou <gwendal@chromium.org> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Kai Chieh Chuang authored
[ Upstream commit 9c0ac70a ] In case, one BE is used by two FE1/FE2 FE1--->BE--> | FE2----] when FE1/FE2 call dpcm_be_dai_hw_free() together the BE users will be 2 (> 1), hence cannot be hw_free the be state will leave at, ex. SND_SOC_DPCM_STATE_STOP later FE1/FE2 call dpcm_be_dai_shutdown(), will be skip due to wrong state. leaving the BE not being hw_free and shutdown. The BE dai will be hw_free later when calling dpcm_be_dai_shutdown() if still in invalid state. Signed-off-by:
KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by:
-
