- 19 Feb, 2024 3 commits
-
-
Hans Peter authored
On my EliteBook 840 G8 Notebook PC (ProdId 5S7R6EC#ABD; built 2022 for german market) the Mute LED is always on. The mute button itself works as expected. alsa-info.sh shows a different subsystem-id 0x8ab9 for Realtek ALC285 Codec, thus the existing quirks for HP 840 G8 don't work. Therefore, add a new quirk for this type of EliteBook. Signed-off-by:
Hans Peter <flurry123@gmx.ch> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240219164518.4099-1-flurry123@gmx.chSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Jay Ajit Mate authored
The Dell Inspiron 16 Plus 7630, similar to its predecessors (7620 models), experiences an issue with unconnected top speakers. Since the controller remains unchanged, this commit addresses the problem by correctly connecting the speakers on NID 0X17 to the DAC on NIC 0x03. Signed-off-by:
Jay Ajit Mate <jay.mate15@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240219100404.9573-1-jay.mate15@gmail.comSigned-off-by:
-
Takashi Sakamoto authored
The local helper function to compare the given pair of cycle count evaluates them. If the left value is less than the right value, the function returns negative value. If the safe cycle is less than the current cycle, it is the case of cycle lost. However, it is not currently handled properly. This commit fixes the bug. Cc: <stable@vger.kernel.org> Fixes: 705794c5 ("ALSA: firewire-lib: check cycle continuity") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20240218033026.72577-1-o-takashi@sakamocchi.jpSigned-off-by:
-
- 15 Feb, 2024 3 commits
-
-
Takashi Iwai authored
The USB audio driver tries to retrieve MIDI jack name strings that can be used for rawmidi substream names and sequencer port names, but its checking is too strict: often the firmware provides the jack info for unexpected directions, and then we miss the info although it's present. In this patch, the code to extract the jack info is changed to allow both in and out directions in a single loop. That is, the former two functions to obtain the descriptor pointers for jack in and out are changed to a single function that returns iJack of the corresponding jack ID, no matter which direction is used. It's a code simplification at the same time as well as the fix. Fixes: eb596e0f ("ALSA: usb-audio: generate midi streaming substream names from jack names") Link: https://lore.kernel.org/r/20240215153144.26047-1-tiwai@suse.deSigned-off-by:
-
Eniac Zhang authored
The HP mt645 G7 Thin Client uses an ALC236 codec and needs the ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make the mute and micmute LEDs work. There are two variants of the USB-C PD chip on this device. Each uses a different BIOS and board ID, hence the two entries. Signed-off-by:
Eniac Zhang <eniac-xw.zhang@hp.com> Signed-off-by:
Alexandru Gagniuc <alexandru.gagniuc@hp.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240215154922.778394-1-alexandru.gagniuc@hp.comSigned-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-fix-v6.8-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.8 A relatively large set of fixes and quirk additions here but they're all driver specific, people seem to be back into the swing of things after the holidays. This is all driver specific and much of it fairly minor.
-
- 14 Feb, 2024 3 commits
-
-
Jean-Loïc Charroud authored
Move entry {0x1043, 0x16a3, "ASUS UX3402VA"} following device ID order. Remove duplicate entry for device {0x1043, 0x1f62, "ASUS UX7602ZM"}. Fixes: 51d97607 ("ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models") Signed-off-by:Jean-Loïc Charroud <lagiraudiere+linux@free.fr> Link: https://lore.kernel.org/r/1969151851.650354669.1707867864074.JavaMail.zimbra@free.frSigned-off-by:
-
Jean-Loïc Charroud authored
The patch 51d97607 ("ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models") modified the entry 1043:1e2e from "ASUS UM3402" to "ASUS UM6702RA/RC" and added another entry for "ASUS UM3402" with 104e:1ee2. The first entry was correct, while the new one corresponds to model "ASUS UM6702RA/RC" Fix the model names for both devices. Fixes: 51d97607 ("ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models") Signed-off-by:
-
Jean-Loïc Charroud authored
Add the values for the missing DSD properties to the cs35l41 config table. Signed-off-by:
-
- 13 Feb, 2024 8 commits
-
-
Richard Fitzgerald authored
The ACPI in some SoundWire laptops has a spk-id-gpios property but it points to the wrong Device node. This patch adds a workaround to try to get the GPIO directly from the correct Device node. If the attempt to get the GPIOs from the property fails, the workaround looks for the SDCA node "AF01", which is where the GpioIo resource is defined. If this exists, a spk-id-gpios mapping is added to that node and then the GPIO is got from that node using the property. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240209111840.1543630-1-rf@opensource.cirrus.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: Hi, Align the IPC4 firmware path/name and the topology path to the documentation: default_fw_path: intel/sof-ipc4/{platform_name} default_lib_path: intel/sof-ipc4-lib/{platform_name} default_tplg_path: intel/sof-ipc4-tplg default_fw_filename: sof-{platform_name}.ri Tiger Lake and Lunar Lake support is not yet available via the official firmware release, the paths can be changed now to avoid misalignment in the future. Regards, Peter --- Peter Ujfalusi (2): ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names ASoC: SOF: Intel: pci-lnl: Change the topology path to intel/sof-ipc4-tplg sound/soc/sof/intel/pci-lnl.c | 2 +- sound/soc/sof/intel/pci-tgl.c | 64 +++++++++++++++++------------------ 2 files changed, 33 insertions(+), 33 deletions(-) -- 2.43.0 -
Tomasz Kudela authored
Add sound support for the Legion 7i gen7 laptop (16IAX7). Signed-off-by:
Tomasz Kudela <ramzes005@gmail.com> Link: https://lore.kernel.org/r/20240213115614.10420-1-ramzes005@gmail.comSigned-off-by:
-
Curtis Malainey authored
commit 74ad8ed6 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops") introduced a new allocation before the upper bounds check in do_rx_work. As a result A DSP can cause bad allocations if spewing garbage. Fixes: 74ad8ed6 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops") Reported-by:
Tim Van Patten <timvp@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Peter Ujfalusi authored
When the system is suspended while audio is active, the sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during suspend the DSP is turned off, streams will be re-started after resume. If the firmware crashes during while audio is running (or when we reset the stream before suspend) then the sof_ipc4_set_multi_pipeline_state() will fail with IPC error and the state change is interrupted. This will cause misalignment between the kernel and firmware state on next DSP boot resulting errors returned by firmware for IPC messages, eventually failing the audio resume. On stream close the errors are ignored so the kernel state will be corrected on the next DSP boot, so the second boot after the DSP panic. If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then state parameter is SOF_IPC4_PIPE_RESET and only in this case. Treat a forced pipeline reset similarly to how we treat a pcm_free by ignoring error on state sending to allow the kernel's state to be consistent with the state the firmware will have after the next boot. Link: https://github.com/thesofproject/sof/issues/8721Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://msgid.link/r/20240213115233.15716-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Arnd Bergmann authored
clang-16 points out a mismatch in function types that was hidden by a typecast: sound/soc/qcom/qdsp6/q6apm-dai.c:355:38: error: cast from 'void (*)(uint32_t, uint32_t, uint32_t *, void *)' (aka 'void (*)(unsigned int, unsigned int, unsigned int *, void *)') to 'q6apm_cb' (aka 'void (*)(unsigned int, unsigned int, void *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] 355 | prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler, prtd, graph_id); sound/soc/qcom/qdsp6/q6apm-dai.c:499:38: error: cast from 'void (*)(uint32_t, uint32_t, uint32_t *, void *)' (aka 'void (*)(unsigned int, unsigned int, unsigned int *, void *)') to 'q6apm_cb' (aka 'void (*)(unsigned int, unsigned int, void *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] 499 | prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler_compr, prtd, graph_id); The only difference here is the 'payload' argument, which is not even used in this function, so just fix its type and remove the cast. Fixes: 88b60bf0 ("ASoC: q6dsp: q6apm-dai: Add open/free compress DAI callbacks") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://msgid.link/r/20240213101105.459402-1-arnd@kernel.orgSigned-off-by:
-
Peter Ujfalusi authored
The firmware release which going to introduce support for Lunar Lake will use the documented default topology directory for IPC4: intel/sof-ipc4-tplg Change the default path accordingly before sof-bin (sof-firmware) release includes Lunar Lake firmware and topologies. Link: https://github.com/thesofproject/sof-docs/blob/master/getting_started/intel_debug/introduction.rst#2-topology-fileSigned-off-by:
Mengdong Lin <mengdong.lin@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Chao Song <chao.song@linux.intel.com> Link: https://msgid.link/r/20240213080418.21256-3-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Peter Ujfalusi authored
The currently used paths and firmware name reflects the reference firmware convention: default_fw_path: intel/avs/{platform_name} default_lib_path: intel/avs-lib/{platform_name} default_tplg_path: intel/avs-tplg default_fw_filename: dsp_basefw.bin The SOF supports building the firmware for cAVS2.5 platforms using IPC4 and it is the preferred IPC4 implementation to be used on these devices. Change the paths and firmware names to reflect this: default_fw_path: intel/sof-ipc4/{platform_name} default_lib_path: intel/sof-ipc4-lib/{platform_name} default_tplg_path: intel/sof-ipc4-tplg default_fw_filename: sof-{platform_name}.ri Signed-off-by:
-
- 12 Feb, 2024 4 commits
-
-
Attila Tőkés authored
Like many other models, the Lenovo 82UU (Yoga Slim 7 Pro 14ARH7) needs a quirk entry for the internal microphone to function. Signed-off-by:
Attila Tőkés <attitokes@gmail.com> Link: https://msgid.link/r/20240210193638.144028-1-attitokes@gmail.comSigned-off-by:
-
Hans de Goede authored
The MeeGoPad T8 uses the standard rt5645 jd_mode=3 setting for jack-detect, but the used jack connector outputs an inverted jack-detect signal. Add a DMI quirk for this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20240211212736.179605-2-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
The DMI strings used for the LattePanda board DMI quirks are very generic. Using the dmidecode database from https://linux-hardware.org/ shows that the chosen DMI strings also match the following 2 laptops which also have a rt5645 codec: Insignia NS-P11W7100 https://linux-hardware.org/?computer=E092FFF8BA04 Insignia NS-P10W8100 https://linux-hardware.org/?computer=AFB6C0BF7934 All 4 hw revisions of the LattePanda board have "S70CR" in their BIOS version DMI strings: DF-BI-7-S70CR100-* DF-BI-7-S70CR110-* DF-BI-7-S70CR200-* LP-BS-7-S70CR700-* See e.g. https://linux-hardware.org/?computer=D98250A817C0 Add a partial (non exact) DMI match on this string to make the LattePanda board DMI match more precise to avoid false-positive matches. Signed-off-by:
-
Mark Brown authored
Merge series from Hans de Goede <hdegoede@redhat.com>: While testing 6.8 on a Bay Trail device with a ALC5640 codec I noticed a regression in 6.8 which causes a NULL pointer deref in probe(). All BYT/CHT Intel machine drivers are affected. Patch 1/2 of this series fixes all of them. Patch 2/2 adds some small cleanups to cht_bsw_rt5645.c for issues which I noticed while working on 1/2.
-
- 11 Feb, 2024 4 commits
-
-
Cristian Ciocaltea authored
A recent change in acp_irq_thread() was meant to address a potential race condition while trying to acquire the hardware semaphore responsible for the synchronization between firmware and host IPC interrupts. This resulted in an improper use of the IPC spinlock, causing normal kernel memory allocations (which may sleep) inside atomic contexts: 1707255557.133976 kernel: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:315 ... 1707255557.134757 kernel: sof_ipc3_rx_msg+0x70/0x130 [snd_sof] 1707255557.134793 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp] 1707255557.134855 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp] 1707255557.134904 kernel: ? irq_thread+0xb5/0x1e0 1707255557.134947 kernel: ? __pfx_irq_thread_fn+0x10/0x10 1707255557.134985 kernel: irq_thread_fn+0x23/0x60 Moreover, there are attempts to lock a mutex from the same atomic context: 1707255557.136357 kernel: ============================= 1707255557.136393 kernel: [ BUG: Invalid wait context ] 1707255557.136413 kernel: 6.8.0-rc3-next-20240206-audio-next #9 Tainted: G W 1707255557.136432 kernel: ----------------------------- 1707255557.136451 kernel: irq/66-AudioDSP/502 is trying to lock: 1707255557.136470 kernel: ffff965152f26af8 (&sb->s_type->i_mutex_key#2){+.+.}-{3:3}, at: start_creating.part.0+0x5f/0x180 ... 1707255557.137429 kernel: start_creating.part.0+0x5f/0x180 1707255557.137457 kernel: __debugfs_create_file+0x61/0x210 1707255557.137475 kernel: snd_sof_debugfs_io_item+0x75/0xc0 [snd_sof] 1707255557.137494 kernel: sof_ipc3_do_rx_work+0x7cf/0x9f0 [snd_sof] 1707255557.137513 kernel: sof_ipc3_rx_msg+0xb3/0x130 [snd_sof] 1707255557.137532 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp] 1707255557.137551 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp] Fix the issues by reducing the lock scope in acp_irq_thread(), so that it guards only the hardware semaphore acquiring attempt. Additionally, restore the initial locking in acp_sof_ipc_irq_thread() to synchronize the handling of immediate replies from DSP core. Fixes: 802134c8 ("ASoC: SOF: amd: Refactor spinlock_irq(&sdev->ipc_lock) sequence in irq_handler") Signed-off-by:Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20240208234315.2182048-1-cristian.ciocaltea@collabora.comSigned-off-by:
-
Alexey Khoroshilov authored
There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex is left locked forever. That may lead to deadlock when rt5645_jack_detect_work() is called for the second time. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: cdba4301 ("ASoC: rt5650: add mutex to avoid the jack detection failure") Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/1707645514-21196-1-git-send-email-khoroshilov@ispras.ruSigned-off-by:
-
Hans de Goede authored
4 fixes / cleanups to the rt5645 mc driver's codec_name handling: 1. In the for loop looking for the dai_index for the codec, replace card->dai_link[i] with cht_dailink[i]. The for loop already uses ARRAY_SIZE(cht_dailink) as bound and card->dai_link is just a pointer to cht_dailink using card->dai_link only obfuscates that cht_dailink is being modified directly rather then say a copy of cht_dailink. Using cht_dailink[i] also makes the code consistent with other machine drivers. 2. Don't set cht_dailink[dai_index].codecs->name in the for loop, this immediately gets overridden using acpi_dev_name(adev) directly below the loop. 3. Add a missing break to the loop. 4. Remove the now no longer used (only set, never read) codec_name field from struct cht_mc_private. Signed-off-by:
-
Hans de Goede authored
Since commit 13f58267 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()") dummy snd_soc_dai_link.codecs entries no longer have a name set. This means that when looking for the codec dai_link the machine driver can no longer unconditionally run strcmp() on snd_soc_dai_link.codecs[0].name since this may now be NULL. Add a check for snd_soc_dai_link.codecs[0].name being NULL to all BYT/CHT machine drivers to avoid NULL pointer dereferences in their probe() methods. Fixes: 13f58267 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()") Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
- 09 Feb, 2024 2 commits
-
-
Richard Fitzgerald authored
The driver never uses the IRQ1_CFG register so there's no need to provide a default value. It's set as a readable register only for debugging through the regmap registers file. A system-specific firmware could overwrite this register with a non-default value. Therefore the driver can't hardcode what the initial value actually is. As the register is only for debugging the value can be left unknown until someone wants to read it through debugfs. Signed-off-by:
-
Lukas Bulwahn authored
Commit 73cfbfa9 ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") adds configs SND_HDA_SCODEC_CS35L56_{I2C,SPI}, which selects the non-existing config CS_DSP. Note the renaming in commit d7cfdf17 ("firmware: cs_dsp: Rename KConfig symbol CS_DSP -> FW_CS_DSP"), though. Select the intended config FW_CS_DSP. This broken select command probably was not noticed as the configs also select SND_HDA_CS_DSP_CONTROLS and this then selects FW_CS_DSP. So, the select FW_CS_DSP could actually be dropped, but we will keep this redundancy in place as the author originally also intended to have this redundancy of selects in place. Fixes: 73cfbfa9 ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
Simon Trimmer <simont@opensource.cirrus.com> Link: https://lore.kernel.org/r/20240209082044.3981-1-lukas.bulwahn@gmail.comSigned-off-by:
-
- 08 Feb, 2024 2 commits
-
-
Ranjani Sridharan authored
With the change in the widget free logic to power down the cores only when the scheduler widgets are freed, we need to ensure that the scheduler widget is freed only after all the widgets associated with the scheduler are freed. This is to ensure that the secondary core that the scheduler is scheduled to run on is kept powered on until all widgets that need them are in use. While this works well for dynamic pipelines, in the case of static pipelines the current logic does not take this into account and frees all widgets in the order they occur in the widget_list. So, modify this to ensure that the scheduler widgets are freed only after all other types of widgets in the widget_list are freed. Link: https://github.com/thesofproject/linux/issues/4807 Fixes: 31ed8da1 ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores") Signed-off-by:
-
Richard Fitzgerald authored
Rewrite the handling of ASP1 TX mixer mux initialization to prevent a deadlock during component_remove(). The firmware can overwrite the ASP1 TX mixer registers with system-specific settings. This is mainly for hardware that uses the ASP as a chip-to-chip link controlled by the firmware. Because of this the driver cannot know the starting state of the ASP1 mixer muxes until the firmware has been downloaded and rebooted. The original workaround for this was to queue a work function from the dsp_work() job. This work then read the register values (populating the regmap cache the first time around) and then called snd_soc_dapm_mux_update_power(). The problem with this is that it was ultimately triggered by cs35l56_component_probe() queueing dsp_work, which meant that it would be running in parallel with the rest of the ASoC component and card initialization. To prevent accessing DAPM before it was fully initialized the work function took the card mutex. But this would deadlock if cs35l56_component_remove() was called before the work job had completed, because ASoC calls component_remove() with the card mutex held. This new version removes the work function. Instead the regmap cache and DAPM mux widgets are initialized the first time any of the associated ALSA controls is read or written. Signed-off-by:
-
- 07 Feb, 2024 3 commits
-
-
Amadeusz Sławiński authored
In case TDM is set in topology on SSP0, parser will overwrite vindex value, because it only checks if port is set. Fix this by checking whole field value. Fixes: e6d50e47 ("ASoC: Intel: avs: Improve topology parsing of dynamic strings") Reviewed-by:
Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20240207112624.2132821-1-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Charles Keepax authored
The IRQ should be disabled whilst entering and exiting system suspend to avoid the IRQ handler being called whilst the PM runtime is disabled. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20240206113850.719888-2-ckeepax@opensource.cirrus.comSigned-off-by:
-
Charles Keepax authored
As devm_pm_runtime_enable can fail due to memory allocations, it is best to handle the error. Signed-off-by:
-
- 06 Feb, 2024 1 commit
-
-
Mario Limonciello authored
The laptop requires a quirk ID to enable its internal microphone. Add it to the DMI quirk table. Reported-by:
Stanislav Petrov <stanislav.i.petrov@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216925 Cc: stable@vger.kernel.org Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240205214853.2689-1-mario.limonciello@amd.comSigned-off-by:
-
- 05 Feb, 2024 6 commits
-
-
Gergo Koteles authored
The tascodec_init() of the snd-soc-tas2781-comlib module is called from snd-soc-tas2781-i2c and snd-hda-scodec-tas2781-i2c modules. It calls request_firmware_nowait() with parameter THIS_MODULE and a cont/callback from the latter modules. The latter modules can be removed while their callbacks are running, resulting in a general protection failure. Add module parameter to tascodec_init() so request_firmware_nowait() can be called with the module of the callback. Fixes: ef3bcde7 ("ASoC: tas2781: Add tas2781 driver") CC: stable@vger.kernel.org Signed-off-by:
Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/118dad922cef50525e5aab09badef2fa0eb796e5.1707076603.git.soyer@irl.huSigned-off-by:
-
Cezary Rojewski authored
Recent changes modified operation-order in the probe() function without updating its error path accordingly. If snd_hdac_i915_init() exists with status EPROBE_DEFER the error path must cleanup allocated IRQs before leaving the scope. Fixes: 2dddc514 ("ASoC: Intel: avs: Move snd_hdac_i915_init to before probe_work.") Signed-off-by:
-
Jeffrey Hugo authored
The servers for the @codeaurora domain have long been retired and any messages sent there bounce. Srinivasa Rao Mandadapu has left the company and there does not appear to be an updated address to suggest, so drop Srinivasa as maintainer of the binding. The binding still appears to be maintined as Judy is listed. Signed-off-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240202174313.4113670-1-quic_jhugo@quicinc.comSigned-off-by:
-
Dan Carpenter authored
It looks like the "!" character was added accidentally. The regmap_update_bits_check() function is normally going to succeed. This means the rest of the function is unreachable and we don't handle the situation where "changed" is true correctly. Fixes: 07f7d6e7 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
-
Shuming Fan authored
This patch adds another two IDs for the Dell dual speaker platform. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240205072252.3791500-1-shumingf@realtek.comSigned-off-by:
-
bo liu authored
The SWS JS201D need a different pinconfig from windows driver. Add a quirk to use a specific pinconfig to SWS JS201D. Signed-off-by:
bo liu <bo.liu@senarytech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240205013802.51907-1-bo.liu@senarytech.comSigned-off-by:
-
- 01 Feb, 2024 1 commit
-
-
Takashi Iwai authored
Merge tag 'asoc-fix-v6.8-rc2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.8 This pull request adds Richard Fitzgerald's series with extensive fixes for the CS35L56, he said: These patches fix various things that were undocumented, unknown or uncertain when the original driver code was written. And also a few things that were just bugs.
-
