- 21 Jul, 2020 40 commits
-
-
Lorenzo Bianconi authored
mt7622/mt7663 chipsets rely on a fixed reverse queue map order respect to mac80211 one: - q(0): IEEE80211_AC_BK - q(1): IEEE80211_AC_BE - q(2): IEEE80211_AC_VI - q(3): IEEE80211_AC_VO Fixes: cdad4874 ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3 ("mt76: mt7615: introduce mt7663e support") Co-developed-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
acs and wmm index are swapped in mt7615_queues_acq respect to the hw design Signed-off-by:
-
Lorenzo Bianconi authored
Coverage class callback can potentially run in parallel with other routines (e.g. mt7615_set_channel) that configures timing registers. Run coverage class callback holding mt76 mutex Signed-off-by:
-
Vladimir Oltean authored
Now that DSA supports MTU configuration, undo the effects of commit 8b1efc0f ("net: remove MTU limits on a few ether_setup callers") and let DSA interfaces use the default min_mtu and max_mtu specified by ether_setup(). This is more important for min_mtu: since DSA is Ethernet, the minimum MTU is the same as of any other Ethernet interface, and definitely not zero. For the max_mtu, we have a callback through which drivers can override that, if they want to. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jonathan McDowell authored
This switch has a single max frame size configuration register, so we track the requested MTU for each port and apply the largest. v2: - Address review feedback from Vladimir Oltean Signed-off-by:
Jonathan McDowell <noodles@earth.li> Acked-by:
-
Wang Hai authored
Because kfree_skb already checked NULL skb parameter, so the additional checks are unnecessary, just remove them. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated, GFP_KERNEL can be used because it is called from the probe function (i.e. 'fealnx_init_one()') and no lock is taken. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'setup_hw()' (hfcpci.c) GFP_KERNEL can be used because it is called from the probe function and no lock is taken. The call chain is: hfc_probe() --> setup_card() --> setup_hw() When memory is allocated in 'inittiger()' (netjet.c) GFP_ATOMIC must be used because a spin_lock is taken by the caller (i.e. 'nj_init_card()') This is also consistent with the other allocations done in the function. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
Briana Oursler authored
Add tdc to existing kselftest infrastructure so that it can be run with existing kselftests. TDC now generates objects in objdir/kselftest without cluttering main objdir, leaves source directory clean, and installs correctly in kselftest_install, properly adding itself to run_kselftest.sh script. Add tc-testing as a target of selftests/Makefile. Create tdc.sh to run tdc.py targets with correct arguments. To support single target from selftest/Makefile, combine tc-testing/bpf/Makefile and tc-testing/Makefile. Move action.c up a directory to tc-testing/. Tested with: make O=/tmp/{objdir} TARGETS="tc-testing" kselftest cd /tmp/{objdir} cd kselftest cd tc-testing ./tdc.sh make -C tools/testing/selftests/ TARGETS=tc-testing run_tests make TARGETS="tc-testing" kselftest cd tools/testing/selftests ./kselftest_install.sh /tmp/exampledir My VM doesn't run all the kselftests so I commented out all except my target and net/pmtu.sh then: cd /tmp/exampledir && ./run_kselftest.sh Co-developed-by:Davide Caratti <dcaratti@redhat.com> Signed-off-by:
Briana Oursler <briana.oursler@gmail.com> Signed-off-by:
-
Vinay Kumar Yadav authored
Enable tcp window scaling option in hw based on sysctl settings and option in connection request. v1->v2: - Set window scale option based on option in connection request. Signed-off-by:
Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by:
-
David S. Miller authored
Mark Starovoytov says: ==================== net: atlantic: various features This patchset adds more features for Atlantic NICs: * media detect; * additional per-queue stats; * PTP stats; * ipv6 support for TCP LSO and UDP GSO; * 64-bit operations; * A0 ntuple filters; * MAC temperature (hwmon). This work is a joint effort of Marvell developers. v3: * reworked patches related to stats: . fixed u64_stats_update_* usage; . use simple assignment in _get_stats / _fill_stats_data; . made _get_sw_stats / _fill_stats_data return count as return value; . split rx and tx per-queue stats; v2: https://patchwork.ozlabs.org/cover/1329652/ * removed media detect feature (will be reworked and submitted later); * removed irq counter from stats; * use u64_stats_update_* to protect 64-bit stats; * use io-64-nonatomic-lo-hi.h for readq/writeq fallbacks; v1: https://patchwork.ozlabs.org/cover/1327894/ ==================== Signed-off-by:
-
Mark Starovoytov authored
This patch adds the possibility to obtain MAC temperature via hwmon. On A1 there are two separate temperature sensors. On A2 there's only one temperature sensor, which is used for reporting both MAC and PHY temperature. Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
Dmitry Bogdanov authored
This patch adds support for ntuple filters on A0. Signed-off-by:
Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by:
-
Nikita Danilov authored
This patch syncs up hw_atl_a0.c with an out-of-tree driver, where an intermediate variable was introduced in a couple of functions to improve the code readability a bit. Signed-off-by:
Nikita Danilov <ndanilov@marvell.com> Signed-off-by:
-
Mark Starovoytov authored
This patch replaces magic constant ~0U usage with U32_MAX in aq_hw_utils.c Signed-off-by:
-
Pavel Belous authored
This patch adds support for 64-bit reads/writes where applicable, e.g. A2 supports them. Signed-off-by:
Pavel Belous <pbelous@marvell.com> Signed-off-by:
-
Igor Russkikh authored
This patch enables ipv6 support for TCP LSO and UDP GSO. The code itself (aq_nic_map_skb) was ready for this after udp gso feature, but corresponding NETIF_F_TSO6 wasn't enabled. We now have tested both tcp and udp v6 GSO, and enabling them safely. Signed-off-by:
-
Pavel Belous authored
This patch adds PTP rings statistics. Before that these were missing from overall stats, hardening debugging and analysis. Signed-off-by:
-
Dmitry Bogdanov authored
This patch adds additional per-queue stats, these could be useful for debugging and diagnostics. Signed-off-by:
-
Mark Starovoytov authored
This patch adds u64_stats_update_* usage to protect access to 64-bit stats, where necessary. This is necessary for per-ring stats, because they are updated by the driver directly, so there is a possibility for a partial read. Other stats require no additional protection, e.g.: * all MACSec stats are fetched directly from HW (under semaphore); * nic/ndev stats (aq_stats_s) are fetched directly from FW (under mutex). Signed-off-by:
-
Mark Starovoytov authored
This patch splits rx and tx per-queue stats. This change simplifies the follow-up introduction of PTP stats and u64_stats_update_* usage. Signed-off-by:
-
Mark Starovoytov authored
This patch changes aq_vec_get_sw_stats() to return count as a return value (which was unused) instead of an out parameter. Signed-off-by:
-
Mark Starovoytov authored
This patch replaces addition assignment operator with a simple assignment in aq_vec_get_stats() and aq_vec_get_sw_stats(), because it is sufficient in both cases and this change simplifies the introduction of u64_stats_update_* in these functions. Signed-off-by:
-
Mark Starovoytov authored
This patch moves FRAC_PER_NS to aq_hw.h so that it can be used in both hw_atl (A1) and hw_atl2 (A2) in the future. Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Extend testptp with PTP perout waveform Demonstrate the usage of the newly introduced flags in the PTP_PEROUT_REQUEST2 ioctl: https://www.spinics.net/lists/netdev/msg669346.html ==================== Signed-off-by:
-
Vladimir Oltean authored
Extend the example program for PTP ancillary functionality with the ability to configure not only the periodic output's period (frequency), but also the phase and duty cycle (pulse width) which were newly introduced. The ioctl level also needs to be updated to the new PTP_PEROUT_REQUEST2, since the original PTP_PEROUT_REQUEST doesn't support this functionality. For an in-tree testing program, not having explicit backwards compatibility is fine, as it should always be tested with the current kernel headers and sources. Tested with an oscilloscope on the felix switch PHC: echo '2 0' > /sys/class/ptp/ptp1/pins/switch_1588_dat0 ./testptp -d /dev/ptp1 -p 1000000000 -w 100000000 -H 1000 -i 0 Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Since 'perout' holds the nanosecond value of the signal's period, it should be a 64-bit value. Current assumption is that it cannot be larger than 1 second. Signed-off-by:
-
Vaibhav Gupta authored
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. This driver makes use of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), pci_set_power_state() and pci_set_master() to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Use to_pci_dev() and dev_get_drvdata() to get "struct pci_dev*" variable and drv data. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
-
David S. Miller authored
Alexander Lobakin says: ==================== qed, qede: add support for new operating modes This series covers the support for the following: - new port modes; - loopback modes, previously missing; - new speed/link modes; - several FEC modes; - multi-rate transceivers; and also cleans up and optimizes several related parts of code. v3 (from [2]): - dropped custom link mode declaration; qed, qede and qedf switched to Ethtool link modes and definitions (#0001, #0002, per Andrew Lunn's suggestion); - exchange more .text size to .initconst and .ro_after_init in qede (#0003). v2 (from [1]): - added a patch (#0010) that drops discussed dead struct member; - addressed checkpatch complaints on #0014 (former #0013); - rebased on top of latest net-next; - no other changes. [1] https://lore.kernel.org/netdev/20200716115446.994-1-alobakin@marvell.com/ [2] https://lore.kernel.org/netdev/20200719201453.3648-1-alobakin@marvell.com/ ==================== Signed-off-by:
-
Alexander Lobakin authored
Add all necessary code (NVM parsing, MFW and Ethtool reports etc.) to support extended speed and FEC modes. These new modes are supported by the new boards revisions and newer MFW versions. Misc: correct port type for MEDIA_KR. Signed-off-by:
Alexander Lobakin <alobakin@marvell.com> Signed-off-by:
-
Alexander Lobakin authored
Simplify and lighten qed_set_link() by declaring static link modes maps and populating them on module init. This way we save plenty of text size at the low expense of __ro_after_init and __initconst data (the latter will be purged after module init is done). Misc: sanitize exit callback. Signed-off-by:
-
Alexander Lobakin authored
These modes are relevant only for several boards, but may be reported by MFW as well as the others. Signed-off-by:
-
Alexander Lobakin authored
These ports ship on new boards revisions and are supported by newer firmware versions. Signed-off-by:
-
Alexander Lobakin authored
Struct field qed_hw_info::port_mode isn't used anywhere in the code, so can be safely removed to prevent possible dead code addition. Also remove the enumeration QED_PORT_MODE orphaned after this deletion. Signed-off-by:
-
Alexander Lobakin authored
Reformat a few nvm_cfg* structures (and partly qed_dev) prior to adding new fields and definitions. Signed-off-by:
-
Alexander Lobakin authored
Add Ethtool callbacks for querying and setting FEC parameters if it's supported by the underlying qed module and MFW version running on the device. Signed-off-by:
-
Alexander Lobakin authored
Prior to adding new callbacks, format qede ethtool_ops structs to make declarations more fancy and readable. Signed-off-by:
-
Alexander Lobakin authored
Add all necessary routines for reading supported FEC modes from NVM and querying FEC control to the MFW (if the running version supports it). Signed-off-by:
-
Alexander Lobakin authored
Prior to adding new fields and bitfields, reformat the related structures according to the Linux style (spaces to tabs, lowercase hex, indentation etc.). Signed-off-by:
-
Alexander Lobakin authored
Currently qed driver does not take into consideration transceiver's capabilities when generating link partner's speed advertisement. This leads to e.g. incorrect ethtool link info on 10GbaseT modules. Use transceiver info not only for advertisement and support arrays, but also for link partner's abilities to fix it. Misc: fix a couple of comments nearby. Signed-off-by:
-
