- 15 Nov, 2019 40 commits
-
-
Eric Dumazet authored
Since we do not plan using pthread_join() in the server do_accept() loop, we better create detached threads, or risk increasing memory footprint over time. Fixes: 192dc405 ("selftests: net: add tcp_mmap program") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tonghao Zhang authored
The nla_put_u16/nla_put_u32 makes sure that *attrlen is align. The call tree is that: nla_put_u16/nla_put_u32 -> nla_put attrlen = sizeof(u16) or sizeof(u32) -> __nla_put attrlen -> __nla_reserve attrlen -> skb_put(skb, nla_total_size(attrlen)) nla_total_size returns the total length of attribute including padding. Cc: Joe Stringer <joe@ovn.org> Cc: William Tu <u9012063@gmail.com> Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== DSA driver for Vitesse Felix switch This series builds upon the previous "Accomodate DSA front-end into Ocelot" topic and does the following: - Reworks the Ocelot (VSC7514) driver to support one more switching core (VSC9959), used in NPI mode. Some code which was thought to be SoC-specific (ocelot_board.c) wasn't, and vice versa, so it is being accordingly moved. - Exports ocelot driver structures and functions to include/soc/mscc. - Adds a DSA ocelot front-end for VSC9959, which is a PCI device and uses the exported ocelot functionality for hardware configuration. - Adds a tagger driver for the Vitesse injection/extraction DSA headers. This is known to be compatible with at least Ocelot and Felix. ==================== Signed-off-by: -
Vladimir Oltean authored
This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
While it is entirely possible that this tagger format is in fact more generic than just these 2 switch families, I don't have that knowledge. The Seville switch in NXP T1040 has a similar frame format, but there are enough differences (e.g. DEST field starts at bit 57 instead of 56) that calling this file tag_vitesse.c is a bit of a stretch at the moment. The frame format has been listed in a comment so that people who add support for further Vitesse switches can rework this tagger while keeping compatibility with Felix. The "ocelot" name was chosen instead of "felix" because even the Ocelot switch can act as a DSA device when it is used in NPI mode, and the Felix tagger format is almost identical. Currently it is only used for the Felix switch embedded in the NXP LS1028A chip. The ABI for this tagger should be considered "not stable" at the moment. The DSA tag is always placed before the Ethernet header and therefore, we are using the long prefix for RX tags to avoid putting the DSA master port in promiscuous mode. Once there will be an API in DSA for drivers to request DSA masters to be in promiscuous mode unconditionally, we will switch to the "no prefix" extraction frame header, which will save 16 padding bytes for each RX frame. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
The Felix DSA driver needs to write to SYS_RAM_INIT_RAM_INIT for its own chip initialization process. Also update the MAINTAINERS file such that the headers exported by the ocelot driver are under the same maintainers' umbrella as the driver itself. Signed-off-by:
-
Vladimir Oltean authored
We will be registering another switch driver based on ocelot, which lives under drivers/net/dsa. Make sure the Felix DSA front-end has the necessary abstractions to implement a new Ocelot driver instantiation. This includes the function prototypes for implementing DSA callbacks. Signed-off-by:
-
Vladimir Oltean authored
The Felix switch has a different reset procedure, so a function pointer needs to be created and added to the ocelot_ops structure. The reset procedure has been moved into ocelot_init. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Vladimir Oltean authored
When using the NPI port, the DSA tag is passed through Ethernet, so the switch's MAC needs to accept it as it comes from the DSA master. Increase the MTU on the external CPU port to account for the length of the injection header. Without this patch, MTU-sized frames are dropped by the switch's CPU port on xmit, which is especially obvious in TCP sessions. Signed-off-by:
-
Vladimir Oltean authored
This constant will be used in a future patch to increase the MTU on NPI ports, and will also be used in the tagger driver for Felix. Signed-off-by:
-
Vladimir Oltean authored
Since in an NPI/DSA setup, not all ports will have the same MTU, we need to make sure the watermarks for pause frames and/or tail dropping logic that existed in the driver is still coherent for the new MTU values. We need to do this because the NPI (aka external CPU) port needs an increased MTU for the DSA tag. This will be done in a future patch. Signed-off-by:
-
Vladimir Oltean authored
It doesn't make sense to rewrite all these registers every time the PHY library notifies us about a link state change. In a future patch we will customize the MTU for the CPU port, and since the MTU was previously configured from adjust_link, if we don't make this change, its value would have got overridden. Signed-off-by:
-
Claudiu Manoil authored
The adjust_link routine should be generic enough to be (re)used by any SoC that integrates a switch core compatible with the Ocelot core switch driver. Currently all configurations are generic except for the PCS settings that are SoC specific. Move these out to the Ocelot SoC/board instance. Signed-off-by:
-
Claudiu Manoil authored
Let's make this ioremap and regmap init code common. It should not be platform dependent as it should be usable by PCI devices too. Use better names where necessary to avoid clashes. Signed-off-by:
-
David S. Miller authored
Karsten Graul says: ==================== net/smc: improve termination handling (part 3) Part 3 of the SMC termination patches improves the link group termination processing and introduces the ability to immediately terminate a link group. ==================== Signed-off-by: -
Ursula Braun authored
If the SMC module is unloaded or an IB device is thrown away, the immediate link group freeing introduced for SMCD is exploited for SMCR as well. That means SMCR-specifics are added to smc_conn_kill(). Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Ursula Braun authored
Make sure all pending work requests are completed before freeing a link. Dismiss tx pending slots already when terminating a link group to exploit termination shortcut in tx completion queue handler. And kill the completion queue tasklets after destroy of the completion queues, otherwise there is a time window for another tasklet schedule of an already killed tasklet. Signed-off-by:
-
Ursula Braun authored
For abnormal termination issue an LLC DELETE_LINK without the orderly flag. Signed-off-by:
-
Ursula Braun authored
Avoid waiting for a free work request buffer, if the link group is already terminating. Signed-off-by:
-
Ursula Braun authored
If the ism module is unloaded return control from exit routine only, if all link groups are freed. If an IB device is thrown away return control from device removal only, if all link groups belonging to this device are freed. A counters for the total number of SMCD link groups per ISM device is introduced. ism module unloading continues only if the total number of SMCD link groups for all ISM devices is zero. ISM device removal continues only it the total number of SMCD link groups per ISM device has decreased to zero. Signed-off-by:
-
Ursula Braun authored
A final cleanup due to SMCD device removal means immediate freeing of all link groups belonging to this device in interrupt context. This patch introduces a separate SMCD link group termination routine, which terminates all link groups of an SMCD device. This new routine smcd_terminate_all ()is reused if the smc module is unloaded. Signed-off-by:
-
Ursula Braun authored
SMCD link group termination is called when peer signals its shutdown of its corresponding link group. For regular shutdowns no connections exist anymore. For abnormal shutdowns connections must be killed and their DMBs must be unregistered immediately. That means the SMCR method to delay the link group freeing several seconds does not fit. This patch adds immediate termination of a link group and its SMCD connections and makes sure all SMCD link group related cleanup steps are finished. Signed-off-by:
-
Ursula Braun authored
If peer announces shutdown, use the link group terminate worker for local cleanup of link groups and connections to terminate link group in proper context. Make sure link groups are cleaned up first before destroying the event queue of the SMCD device, because link group cleanup may raise events. Send signal shutdown only if peer has not done it already. Send socket abort or close only, if peer has not already announced shutdown. Signed-off-by:
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: CPU Performance Improvements CPU Performance improvements for stmmac. Please check bellow for results before and after the series. Patch 1/7, allows RX Interrupt on Completion to be disabled and only use the RX HW Watchdog. Patch 2/7, setups the default RX coalesce settings instead of using the minimum value. Patch 3/7 and 4/7, removes the uneeded computations for RX Flow Control activation/de-activation, on some cases. Patch 5/7, tunes-up the default coalesce settings. Patch 6/7, re-works the TX coalesce timer activation logic. Patch 7/7, removes the now uneeded TBU interrupt. NetPerf UDP Results: -------------------- Socket Message Elapsed Messages CPU Service Size Size Time Okay Errors Throughput Util Demand bytes bytes secs # # 10^6bits/sec % SS us/KB --- XGMAC@2.5G: Before 212992 1400 10.00 2100620 0 2351.7 36.69 5.112 212992 10.00 2100539 2351.6 26.18 3.648 --- XGMAC@2.5G: After 212992 1400 10.00 2108972 0 2361.5 21.73 3.015 212992 10.00 2097038 2348.1 19.21 2.666 --- GMAC5@1G: Before 212992 1400 10.00 786000 0 880.2 34.71 12.923 212992 10.00 786000 880.2 23.42 8.719 --- GMAC5@1G: After 212992 1400 10.00 842648 0 943.7 14.12 4.903 212992 10.00 842648 943.7 12.73 4.418 Perf TCP Results on RX Path: ---------------------------- --- XGMAC@2.5G: Before 22.51% swapper [stmmac] [k] dwxgmac2_dma_interrupt 10.82% swapper [stmmac] [k] dwxgmac2_host_mtl_irq_status 5.21% swapper [stmmac] [k] dwxgmac2_host_irq_status 4.67% swapper [stmmac] [k] dwxgmac3_safety_feat_irq_status 3.63% swapper [kernel.kallsyms] [k] stack_trace_consume_entry 2.74% iperf3 [kernel.kallsyms] [k] copy_user_enhanced_fast_string 2.52% swapper [kernel.kallsyms] [k] update_stack_state 1.94% ksoftirqd/0 [stmmac] [k] dwxgmac2_dma_interrupt 1.45% iperf3 [kernel.kallsyms] [k] queued_spin_lock_slowpath 1.26% swapper [kernel.kallsyms] [k] create_object --- XGMAC@2.5G: After 7.43% swapper [kernel.kallsyms] [k] stack_trace_consume_entry 5.86% swapper [stmmac] [k] dwxgmac2_dma_interrupt 5.68% swapper [kernel.kallsyms] [k] update_stack_state 4.71% iperf3 [kernel.kallsyms] [k] copy_user_enhanced_fast_string 2.88% swapper [kernel.kallsyms] [k] create_object 2.69% swapper [stmmac] [k] dwxgmac2_host_mtl_irq_status 2.61% swapper [stmmac] [k] stmmac_napi_poll_rx 2.52% swapper [kernel.kallsyms] [k] unwind_next_frame.part.4 1.48% swapper [kernel.kallsyms] [k] unwind_get_return_address 1.38% swapper [kernel.kallsyms] [k] arch_stack_walk --- GMAC5@1G: Before 31.29% swapper [stmmac] [k] dwmac4_dma_interrupt 14.57% swapper [stmmac] [k] dwmac4_irq_mtl_status 10.66% swapper [stmmac] [k] dwmac4_irq_status 1.97% swapper [kernel.kallsyms] [k] stack_trace_consume_entry 1.73% iperf3 [kernel.kallsyms] [k] copy_user_enhanced_fast_string 1.59% swapper [kernel.kallsyms] [k] update_stack_state 1.15% iperf3 [kernel.kallsyms] [k] do_syscall_64 1.01% ksoftirqd/0 [stmmac] [k] dwmac4_dma_interrupt 0.89% swapper [kernel.kallsyms] [k] __default_send_IPI_dest_field 0.75% swapper [stmmac] [k] stmmac_napi_poll_rx --- GMAC5@1G: After 6.70% swapper [kernel.kallsyms] [k] stack_trace_consume_entry 5.79% swapper [stmmac] [k] dwmac4_dma_interrupt 5.29% swapper [kernel.kallsyms] [k] update_stack_state 3.52% iperf3 [kernel.kallsyms] [k] copy_user_enhanced_fast_string 2.83% swapper [stmmac] [k] dwmac4_irq_mtl_status 2.62% swapper [kernel.kallsyms] [k] create_object 2.46% swapper [stmmac] [k] stmmac_napi_poll_rx 2.32% swapper [kernel.kallsyms] [k] unwind_next_frame.part.4 2.19% swapper [stmmac] [k] dwmac4_irq_status 1.39% swapper [kernel.kallsyms] [k] unwind_get_return_address ==================== Signed-off-by: -
Jose Abreu authored
Now that TX Coalesce has been rewritten we no longer need this additional interrupt enabled. This reduces CPU usage. Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
-
Jose Abreu authored
Coalesce logic currently increments the number of packets and sets the IC bit when the coalesced packets have passed a given limit. This does not reflect very well what coalesce was meant for as we can have a large number of packets that are coalesced and then a single one, sent later on that has the IC bit. Rework the logic so that it coalesces only upon a limit of packets and sets the IC bit for large number of packets. Signed-off-by:
-
Jose Abreu authored
Tune-up the defalt coalesce settings for optimal values. This gives the best performance in most of the use-cases. Signed-off-by:
-
Jose Abreu authored
RFA and RFD should not be dependent on FIFO size. In fact, the more FIFO space we have, the later we can activate Flow Control. Let's use hard-coded values for RFA and RFD for all FIFO sizes with the exception of 4k, which is a special case. Signed-off-by:
-
Jose Abreu authored
RFA and RFD should not be dependent on FIFO size. In fact, the more FIFO space we have, the later we can activate Flow Control. Let's use hard-coded values for RFA and RFD for all FIFO sizes with the exception of 4k, which is a special case. Signed-off-by:
-
Jose Abreu authored
For performance reasons, sometimes using the minimum RX Coalesce value is not optimal. Lets setup a default value that is optimal in most of the use cases. Signed-off-by:
-
Jose Abreu authored
We may only want to use the RX Watchdog so lets check if RX Coalesce settings are non-zero and only set the RX Interrupt on Completion bit if its not. Signed-off-by:
-
Ido Schimmel authored
Commit 0c3cbbf9 ("mlxsw: Add specific trap for packets routed via invalid nexthops") allocated an adjacency entry during driver initialization whose purpose is to discard packets hitting the route pointing to it. These adjacency entries are allocated from a resource called KVD linear (KVDL). There are situations in which the user can decide to set the size of this resource (via devlink-resource) to 0, in which case the driver will not be able to load. Therefore, instead of pre-allocating this adjacency entry, simply allocate it only when needed. A variable indicating the validity of the entry is added and is used to ensure it is only allocated and written once and that it is freed after all the routes were flushed. Fixes: 0c3cbbf9 ("mlxsw: Add specific trap for packets routed via invalid nexthops") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
YueHaibing authored
If PROC_FS is not set, gcc warning this: net/tls/tls_proc.c:23:12: warning: 'tls_statistics_seq_show' defined but not used [-Wunused-function] Use #ifdef to guard this. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2019-11-14 please apply the following qeth patches to net-next. Along with the usual cleanups, this (1) reduces collateral packet loss in the RX path when dealing with bad packets and/or allocation errors, and (2) simplifies how the L3 driver deals with mcast IP addresses. ==================== Signed-off-by: -
Julian Wiedmann authored
Given the way how the sysfs attributes are registered / unregistered, the show/store helpers will never be called with a NULL drvdata. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
The remaining usage effectively is a kmemdup() of the query object. By not wrapping it, some of the callers can now use GFP_KERNEL for the allocation. Signed-off-by:
-
Julian Wiedmann authored
Use vlan_for_each() instead of tracking each registered VID internally. Signed-off-by:
-
Julian Wiedmann authored
Current code processes each (VLAN) device twice - once to inspect the IPv4 mcast addresses, and then a second time to walk the IPv6 mcast addresses. Unify all this into a single helper, thus removing some checks and a duplicated VLAN lookup. Signed-off-by:
-
Julian Wiedmann authored
Trust the IPv4/IPv6 code to properly remove its mcast addresses when a VLAN device is unregistered, and then also trigger an RX modeset whenever it's needed. Signed-off-by:
-
Julian Wiedmann authored
Push the inet6_dev locking down into the helper that actually needs it for walking the mc_list. Signed-off-by:
-
