- 27 Mar, 2020 40 commits
-
-
Vasundhara Volam authored
Fix macro names to report fw.mgmt and fw.ncsi versions to match the devlink documentation. Example display after fixes: $ devlink dev info pci/0000:af:00.0 pci/0000:af:00.0: driver bnxt_en serial_number B0-26-28-FF-FE-25-84-20 versions: fixed: board.id BCM957454A4540 asic.id C454 asic.rev 1 running: fw 216.1.154.0 fw.psid 0.0.0 fw.mgmt 216.1.146.0 fw.mgmt.api 1.10.1 fw.ncsi 864.0.44.0 fw.roce 216.1.16.0 Fixes: 9599e036 ("bnxt_en: Add support for devlink info command") Signed-off-by:Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
Add part number info from the vital product data to info_get command via devlink tool. Update bnxt.rst documentation as well. Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Vasundhara Volam authored
Store the part number and serial number information from VPD in the bnxt structure. Follow up patch will add the support to display the information via devlink command. Signed-off-by:
-
Vasundhara Volam authored
This patch adds a new macro for serial number keyword. Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Vasundhara Volam authored
Display the minimum version of firmware interface spec supported between driver and firmware. Also update bnxt.rst documentation file. Signed-off-by:
-
Vasundhara Volam authored
Add definition and documentation for the new generic info "fw.mgmt.api". This macro specifies the version of the software interfaces between driver and firmware. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Various static checkers fixes Jakub told me he gets some warnings with W=1, so I decided to check with sparse, smatch and coccinelle as well. This patch set fixes all the issues found. None are actual bugs / regressions and therefore not targeted at net. Patches #1-#2 add missing kernel-doc comments. Patch #3 removes dead code. Patch #4 reworks the ACL code to avoid defining a static variable in a header file. Patch #5 removes unnecessary conversion to bool that coccinelle warns about. Patch #6 avoids false-positive uninitialized symbol errors emitted by smatch. ==================== Signed-off-by: -
Ido Schimmel authored
Suppress the following smatch errors. None of these are actually possible with current code paths. drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1220 mlxsw_sp_ipip_entry_find_decap() error: uninitialized symbol 'saddrp'. drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1220 mlxsw_sp_ipip_entry_find_decap() error: uninitialized symbol 'saddr_len'. drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1221 mlxsw_sp_ipip_entry_find_decap() error: uninitialized symbol 'saddr_prefix_len'. drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:1390 mlxsw_sp_netdevice_ipip_ol_reg_event() error: uninitialized symbol 'ipipt'. drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3255 mlxsw_sp_nexthop_group_update() error: uninitialized symbol 'err'. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
-
Ido Schimmel authored
Suppress following warning from coccinelle: drivers/net/ethernet/mellanox/mlxsw//switchx2.c:183:63-68: WARNING: conversion to bool not needed here Signed-off-by:
-
Ido Schimmel authored
The static array 'mlxsw_afk_element_infos' in 'core_acl_flex_keys.h' is copied to each file that includes the header, but not all use it. This results in the following warnings when compiling with W=1: drivers/net/ethernet/mellanox/mlxsw//core_acl_flex_keys.h:76:44: warning: ‘mlxsw_afk_element_infos’ defined but not used [-Wunused-const-variable=] One way to suppress the warning is to mark the array with '__maybe_unused', but another option is to remove it from the header file entirely. Change 'struct mlxsw_afk_element_inst' to store the key to the array ('element') instead of the array value keyed by 'element'. Adjust the different users accordingly. Signed-off-by: -
Ido Schimmel authored
In merge commit 50853808 ("Merge branch 'mlxsw-Prepare-for-VLAN-aware-bridge-w-VxLAN'") I flipped mlxsw to use emulated 802.1Q FIDs and correspondingly emulated VLAN RIFs. This means that the non-emulated variants are no longer used. Remove them and suppress the following warnings when compiling with W=1: drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:7572:38: warning: ‘mlxsw_sp_rif_vlan_ops’ defined but not used [-Wunused-const-variable=] drivers/net/ethernet/mellanox/mlxsw//spectrum_fid.c:584:41: warning: ‘mlxsw_sp_fid_8021q_family’ defined but not used [-Wunused-const-variable=] Signed-off-by:
-
Ido Schimmel authored
Suppress following warnings when compiling with W=1: drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1552: warning: Function parameter or member 'mlxsw_sp' not described in '__mlxsw_sp_ipip_entry_update_tunnel' drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1552: warning: Function parameter or member 'ipip_entry' not described in '__mlxsw_sp_ipip_entry_update_tunnel' drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1552: warning: Function parameter or member 'extack' not described in '__mlxsw_sp_ipip_entry_update_tunnel' Signed-off-by:
-
Ido Schimmel authored
Suppress following warning when compiling with W=1: drivers/net/ethernet/mellanox/mlxsw//i2c.c:78: warning: Function parameter or member 'cmd' not described in 'mlxsw_i2c' Signed-off-by:
-
Heiner Kallweit authored
So far we set phydev->suspended to true in phy_suspend() even if the PHY driver doesn't implement the suspend callback. This applies accordingly for the resume path. The current behavior doesn't cause any issue I'd be aware of, but it's not logical and misleading, especially considering the description of the flag: "suspended: Set to true if this phy has been suspended successfully" Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Igor Russkikh says: ==================== net: atlantic: MACSec support for AQC devices This patchset introduces MACSec HW offloading support in Marvell(Aquantia) AQC atlantic driver. This implementation is a joint effort of Marvell developers on top of the work started by Antoine Tenart. v2: * clean up the generated code (removed useless bit operations); * use WARN_ONCE to avoid log spam; * use put_unaligned_be64; * removed trailing \0 and length limit for format strings; v1: https://patchwork.ozlabs.org/cover/1259998/ RFC v2: https://patchwork.ozlabs.org/cover/1252204/ RFC v1: https://patchwork.ozlabs.org/cover/1238082/ Several patches introduce backward-incompatible changes and are subject for discussion/drop: 1) patch 0007: multicast/broadcast when offloading is needed to handle ARP requests, because they have broadcast destination address; With this patch we also match and encrypt/decrypt packets between macsec hw and realdev based on device's mac address. This can potentially be used to support multiple macsec offloaded interfaces on top of one realdev. However in some environments this could lead to problems, e.g. the 'bridge over macsec' configuration will expect the packets with unknown src MAC should come through macsec. The patch is questionable, we've used it because our current hw setup and requirements both assume that the decryption is done based on mac address match only. This could be changed by encrypting/decripting all the traffic (except control). 2) patch 0009: real_dev features are now propagated to macsec device (when HW offloading is enabled), otherwise feature set might lead to HW reconfiguration during MACSec configuration. Also, HW offloaded macsec should be able to keep LRO LSO features, since they are transparent for macsec engine (at least in our hardware). ==================== Signed-off-by:
-
Mark Starovoytov authored
This patch adds XPN handling. Our driver doesn't support XPN, but we should still update a couple of places in the code, because the size of 'next_pn' field has changed. Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
Dmitry Bogdanov authored
This patch adds support for MACSec statistics on Atlantic network cards. Signed-off-by:
Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by:
-
Dmitry Bogdanov authored
This patch adds the Atlantic HW-specific bindings for MACSec statistics, e.g. register addresses / structs, helper function, etc, which will be used by actual callback implementations. Signed-off-by:
-
Mark Starovoytov authored
This patch adds support for MACSec ingress HW offloading on Atlantic network cards. Signed-off-by:
-
Mark Starovoytov authored
This patch adds the Atlantic HW-specific bindings for MACSec ingress, e.g. register addresses / structs, helper function, etc, which will be used by actual callback implementations. Signed-off-by:
-
Dmitry Bogdanov authored
This patch adds support for MACSec egress HW offloading on Atlantic network cards. Signed-off-by:
-
Dmitry Bogdanov authored
This patch adds the Atlantic HW-specific bindings for MACSec egress, e.g. register addresses / structs, helper function, etc, which will be used by actual callback implementations. Signed-off-by:
-
Dmitry Bogdanov authored
This patch adds basic functionality for MACSec offloading for Atlantic NICs. MACSec offloading functionality is enabled if network card has appropriate FW that has MACSec offloading enabled in config. Actual functionality (ingress, egress, etc) will be added in follow-up patches. Signed-off-by:
-
Mark Starovoytov authored
This patch makes real_dev_feature propagation by MACSec offloaded device. Issue description: real_dev features are disabled upon macsec creation. Root cause: Features limitation (specific to SW MACSec limitation) is being applied to HW offloaded case as well. This causes 'set_features' request on the real_dev with reduced feature set due to chain propagation. Proposed solution: Report real_dev features when HW offloading is enabled. NB! MACSec offloaded device does not propagate VLAN offload features at the moment. This can potentially be added later on as a separate patch. Note: this patch requires HW offloading to be enabled by default in order to function properly. Signed-off-by:
-
Dmitry Bogdanov authored
When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by:
-
Mark Starovoytov authored
The idea is simple. If the frame is an exact match for the controlled port (based on DA comparison), then we simply divert this skb to matching port. Multicast/broadcast messages are delivered to all ports. Signed-off-by:
-
Dmitry Bogdanov authored
Offload engine can setup several SecY. Each macsec interface shall have its own mac address. It will filter a traffic by dest mac address. Signed-off-by:
-
Dmitry Bogdanov authored
This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by:
-
Antoine Tenart authored
This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC, allowing a user to select a MAC as a provider for MACsec offloading operations. Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Antoine Tenart authored
This patch allows to reference a net_device from a MACsec context. This is needed to allow implementing MACsec operations in net device drivers. Signed-off-by:
-
Antoine Tenart authored
This patch adds a reference to MACsec ops to the net_device structure, allowing net device drivers to implement offloading operations for MACsec. Signed-off-by:
-
Antoine Tenart authored
This patch introduce a new netdev feature, which will be used by drivers to state they can perform MACsec transformations in hardware. The patchset was gathered by Mark, macsec functinality itself was implemented by Dmitry, Mark and Pavel Belous. Signed-off-by:
-
Eugene Syromiatnikov authored
BIT() macro definition is internal to the Linux kernel and is not to be used in UAPI headers; replace its usage with the _BITUL() macro that is already used elsewhere in the header. Fixes: 9c66d156 ("taprio: Add support for hardware offloading") Signed-off-by:
Eugene Syromiatnikov <esyr@redhat.com> Acked-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Maciej Żenczykowski authored
This is trivial since we already have support for the entirely identical (from the kernel's point of view) RDNSS, DNSSL, etc. that also contain opaque data that needs to be passed down to userspace for further processing. As specified in draft-ietf-6man-ra-pref64-09 (while it is still a draft, it is purely waiting on the RFC Editor for cleanups and publishing): PREF64 option contains lifetime and a (up to) 96-bit IPv6 prefix. The 8-bit identifier of the option type as assigned by the IANA is 38. Since we lack DNS64/NAT64/CLAT support in kernel at the moment, thus this option should also be passed on to userland. See: https://tools.ietf.org/html/draft-ietf-6man-ra-pref64-09 https://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xhtml#icmpv6-parameters-5 Cc: Erik Kline <ek@google.com> Cc: Jen Linkova <furry@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Michael Haro <mharo@google.com> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Acked-By:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
David S. Miller authored
Grygorii Strashko says: ==================== net: ethernet: ti: add networking support for k3 am65x/j721e soc This v6 series adds basic networking support support TI K3 AM654x/J721E SoC which have integrated Gigabit Ethernet MAC (Media Access Controller) into device MCU domain and named MCU_CPSW0 (CPSW2G NUSS). Formally TRMs refer CPSW2G NUSS as two-port Gigabit Ethernet Switch subsystem with port 0 being the CPPI DMA host port and port 1 being the external Ethernet port, but for 1 external port device it's just Port 0 <-> ALE <-> Port 1 and it's rather device with HW filtering capabilities then actually switching device. It's expected to have similar devices, but with more external ports. The new Host port 0 Communications Port Programming Interface (CPPI5) is operating by TI AM654x/J721E NAVSS Unified DMA Peripheral Root Complex (UDMA-P) controller [1]. The CPSW2G contains below modules for which existing code is re-used: - MAC SL: cpsw_sl.c - Address Lookup Engine (ALE): cpsw_ale.c, basically compatible with K2 66AK2E/G - Management Data Input/Output interface (MDIO): davinci_mdio.c, fully compatible with TI AM3/4/5 devices Basic features supported by CPSW2G NUSS driver: - VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on ingress, Auto VLAN removal on egress and auto pad to minimum frame size. - multicast filtering - promisc mode - TX multiq support in Round Robin or Fixed priority modes - RX checksum offload for non-fragmented IPv4/IPv6 TCP/UDP packets - TX checksum offload support for IPv4/IPv6 TCP/UDP packets (J721E only). Features under development: - Support for IEEE 1588 Clock Synchronization. The CPSW2G NUSS includes new version of Common Platform Time Sync (CPTS) - tc-mqprio: priority level Quality Of Service (QOS) support (802.1p) - tc-cbs: Support for Audio/Video Bridging (P802.1Qav/D6.0) HW shapers - tc-taprio: IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic - frame preemption: IEEE P902.3br/D2.0 Interspersing Express Traffic, 802.1Qbu - extended ALE features: classifier/policers, auto-aging Patches 1-6 are intended for netdev, Patches 7-11 are intended for K3 Platform tree and provided here for testing purposes. Changes in v6: - fixed comments from Rob Herring <robh@kernel.org> and added his Reviewed-by. - added Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Changes in v5: - renamed files k3-udma-desc-pool.* k3-udma-desc-pool to k3-cppi-desc-pool.*, and API to k3_cppi_desc_pool_* as requested by Peter Ujfalusi <peter.ujfalusi@ti.com> - fixed copy-paste err in am65_cpsw_nuss_ndo_slave_set_rx_mode() which blocked recieving of mcast frames. - added Tested-by: Murali Karicheri <m-karicheri2@ti.com> Changes in v4: - fixed minor comments from Jakub Kicinski <kuba@kernel.org> - dependencies resolved: required phy-rmii-sel changes [2] queued for merge except one [3] which is included in this series with Kishon's ask. Changes in v3: - add ARM64 defconfig changes for testing purposes - fixed DT yaml definition - fixed comments from Jakub Kicinski <kuba@kernel.org> Changes in v2: - fixed DT yaml definition - fixed comments from David Miller v5: https://patchwork.ozlabs.org/cover/1258295/ v4: https://patchwork.ozlabs.org/cover/1256092/ v3: https://patchwork.ozlabs.org/cover/1254568/ v2: https://patchwork.ozlabs.org/cover/1250674/ v1: https://lwn.net/Articles/813087/ TRMs: AM654: http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf J721E: http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf Preliminary documentation can be found at: http://software-dl.ti.com/processor-sdk-linux/esd/docs/latest/linux/Foundational_Components/Kernel/Kernel_Drivers/Network/K3_CPSW2g.html [1] https://lwn.net/Articles/808030/ [2] https://lkml.org/lkml/2020/2/22/100 [3] https://lkml.org/lkml/2020/3/3/724 ==================== Signed-off-by:
-
Grygorii Strashko authored
Enable TI K3 AM654x/J721E DMA and networking options. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Grygorii Strashko authored
The TI J721E EVM base board has TI DP83867 PHY connected to external CPSW NUSS Port 1 in rgmii-rxid mode. Hence, add pinmux and Ethernet PHY configuration for TI j721e SoC MCU Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by:
-
Grygorii Strashko authored
Add DT node for The TI J721E MCU SoC Gigabit Ethernet subsystem (MCU CPSW NUSS). Signed-off-by:
-
Grygorii Strashko authored
AM654 EVM base board has TI DP83867 PHY connected to external CPSW NUSS Port 1 in rgmii-rxid mode. Hence, add pinmux and Ethernet PHY configuration for TI am654 SoC Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by:
-
Grygorii Strashko authored
Add DT node for the TI AM65x SoC Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by:
-
