DCMD_INIT is introduced to indicate the initial DCMD status, which was
earlier set to MFI status.  DCMD_BUSY indicates the resource is busy or
locked.

Link: https://lore.kernel.org/r/1579000882-20246-8-git-send-email-anand.lodnoor@broadcom.comSigned-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

After issuing a adapter reset, driver blindly used to set adprecovery flag
to OPERATIONAL state.  Add a check to see if the FW is operational before
setting the flag and marking reset adapter successful.

Link: https://lore.kernel.org/r/1579000882-20246-7-git-send-email-anand.lodnoor@broadcom.comSigned-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

At the time of firmware initialization, if JBOD map or RAID map is not
available, driver can function without these features in a limited
functionality mode.

Link: https://lore.kernel.org/r/1579000882-20246-6-git-send-email-anand.lodnoor@broadcom.comSigned-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/1579000882-20246-5-git-send-email-anand.lodnoor@broadcom.comSigned-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Ideally, optimal queue depth will be provided by firmware.  The driver
defines will be used as a fallback mechanism in case the FW assisted QD is
not supported.  The driver defined values provide optimal queue depth for
most of the drives and the workloads, as is learned from the firmware
assisted QD results.

Link: https://lore.kernel.org/r/1579000882-20246-4-git-send-email-anand.lodnoor@broadcom.comSigned-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Disable WRITE_SAME (no_write_same) for Virtual Disks only.  For System PDs
and EPDs (Enhanced PDs), WRITE_SAME need not be disabled by default.

Link: https://lore.kernel.org/r/1579000882-20246-3-git-send-email-anand.lodnoor@broadcom.comSigned-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

After device resume we expect the firmware to be in READY state.
Transition to READY might fail due to unhandled exceptions, such as an
internal error or a hardware failure. Retry initiating chip reset and wait
for the controller to come to ready state.

Link: https://lore.kernel.org/r/1579000882-20246-2-git-send-email-anand.lodnoor@broadcom.comSigned-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Do firmware download with 64bit LOAD_RAM command, if driver is using
64bit addressing.

Link: https://lore.kernel.org/r/20200114160936.1517-1-tbogendoerfer@suse.deSigned-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

If the transport cannot be registered, the session/connection creation
needs to be failed early to let the initiator know.  Otherwise, the system
will have an outstanding connection that cannot be used nor removed by
open-iscsi. The result is similar to the error below, triggered by
injecting a failure in the transport's registration path.

openiscsi reports success:

root@debian-vm:~#  iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -l
Logging in to [iface: default, target: iqn:lun1, portal: 127.0.0.1,3260]
Login to [iface: default, target: iqn:lun1, portal:127.0.0.1,3260] successful.

But cannot remove the session afterwards, since the kernel is in an
inconsistent state.

root@debian-vm:~#  iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -u
iscsiadm: No matching sessions found

Link: https://lore.kernel.org/r/20200106185817.640331-4-krisman@collabora.comSigned-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The transport registration may fail.  Make sure the errors are propagated
to the callers.

Link: https://lore.kernel.org/r/20200106185817.640331-3-krisman@collabora.comReviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

attribute_container_device_trigger invokes callbacks that may fail for one
or more classdevs, for instance, the transport_add_class_device callback,
called during transport creation, does memory allocation.  This
information, though, is not propagated to upper layers, and any driver
using the attribute_container_device_trigger API will not know whether any,
some, or all callbacks succeeded.

This patch implements a safe version of this dispatcher, to either succeed
all the callbacks or revert to the original state.

Link: https://lore.kernel.org/r/20200106185817.640331-2-krisman@collabora.comReviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

A faulty userspace that calls destroy_session() before destroying the
connections can trigger the failure.  This patch prevents the issue by
refusing to destroy the session if there are outstanding connections.

------------[ cut here ]------------
kernel BUG at mm/slub.c:306!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 1224 Comm: iscsid Not tainted 5.4.0-rc2.iscsi+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:__slab_free+0x181/0x350
[...]
[ 1209.686056] RSP: 0018:ffffa93d4074fae0 EFLAGS: 00010246
[ 1209.686694] RAX: ffff934efa5ad800 RBX: 000000008010000a RCX: ffff934efa5ad800
[ 1209.687651] RDX: ffff934efa5ad800 RSI: ffffeb4041e96b00 RDI: ffff934efd402c40
[ 1209.688582] RBP: ffffa93d4074fb80 R08: 0000000000000001 R09: ffffffffbb5dfa26
[ 1209.689425] R10: ffff934efa5ad800 R11: 0000000000000001 R12: ffffeb4041e96b00
[ 1209.690285] R13: ffff934efa5ad800 R14: ffff934efd402c40 R15: 0000000000000000
[ 1209.691213] FS:  00007f7945dfb540(0000) GS:ffff934efda80000(0000) knlGS:0000000000000000
[ 1209.692316] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1209.693013] CR2: 000055877fd3da80 CR3: 0000000077384000 CR4: 00000000000006e0
[ 1209.693897] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1209.694773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1209.695631] Call Trace:
[ 1209.695957]  ? __wake_up_common_lock+0x8a/0xc0
[ 1209.696712]  iscsi_pool_free+0x26/0x40
[ 1209.697263]  iscsi_session_teardown+0x2f/0xf0
[ 1209.698117]  iscsi_sw_tcp_session_destroy+0x45/0x60
[ 1209.698831]  iscsi_if_rx+0xd88/0x14e0
[ 1209.699370]  netlink_unicast+0x16f/0x200
[ 1209.699932]  netlink_sendmsg+0x21a/0x3e0
[ 1209.700446]  sock_sendmsg+0x4f/0x60
[ 1209.700902]  ___sys_sendmsg+0x2ae/0x320
[ 1209.701451]  ? cp_new_stat+0x150/0x180
[ 1209.701922]  __sys_sendmsg+0x59/0xa0
[ 1209.702357]  do_syscall_64+0x52/0x160
[ 1209.702812]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1209.703419] RIP: 0033:0x7f7946433914
[...]
[ 1209.706084] RSP: 002b:00007fffb99f2378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1209.706994] RAX: ffffffffffffffda RBX: 000055bc869eac20 RCX: 00007f7946433914
[ 1209.708082] RDX: 0000000000000000 RSI: 00007fffb99f2390 RDI: 0000000000000005
[ 1209.709120] RBP: 00007fffb99f2390 R08: 000055bc84fe9320 R09: 00007fffb99f1f07
[ 1209.710110] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000038
[ 1209.711085] R13: 000055bc8502306e R14: 0000000000000000 R15: 0000000000000000
 Modules linked in:
 ---[ end trace a2d933ede7f730d8 ]---

Link: https://lore.kernel.org/r/20191226203148.2172200-1-krisman@collabora.comSigned-off-by: Nick Black <nlb@google.com>
Co-developed-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Salman Qazi <sqazi@google.com>
Co-developed-by: Junho Ryu <jayr@google.com>
Signed-off-by: Junho Ryu <jayr@google.com>
Co-developed-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add vendor-specific variant callback "apply_dev_quirks" to MediaTek UFS
driver.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578726707-6596-3-git-send-email-stanley.chu@mediatek.comReviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pass UFS device information to vendor-specific variant callback
"apply_dev_quirks" because some platform vendors need to know such
information to apply special handling or quirks in specific devices.

At the same time, modify existing vendor implementations according to the
new interface for those vendor drivers which will be built-in or built as a
module alone with UFS core driver.

[mkp: clarified commit desc]

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578726707-6596-2-git-send-email-stanley.chu@mediatek.comReviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Currently the incorrect %X print format specifier is being used for several
unsigned longs.  Fix these by using %lX instead. Also join up some literal
strings that are split.

Link: https://lore.kernel.org/r/20200108193800.96706-1-colin.king@canonical.com
Addresses-Coverity: ("Invalid type in argument to printf format specifier")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove "errors" word in output string by ufshcd_print_err_hist() since not
all printed targets are "errors". Sometimes they are just "events".

In addition, all events which can be treated as "errors" already have "err"
or "fail" words in their names.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578147968-30938-4-git-send-email-stanley.chu@mediatek.comReviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Device reset history shall be also added for vendor's device reset variant
operation implementation.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578147968-30938-3-git-send-email-stanley.chu@mediatek.comReviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Currently checking if an error history element is empty or not is by its
"value". In most cases, value is error code.

However this checking is not correct because some errors or events do not
specify any values in error history so values remain as 0, and this will
lead to incorrect empty checking.

Fix it by checking "timestamp" instead of "value" because timestamp will be
always assigned for all history elements

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578147968-30938-2-git-send-email-stanley.chu@mediatek.comReviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix sparse warning:

drivers/scsi/lpfc/lpfc_nportdisc.c:344:1: warning:
 symbol 'lpfc_defer_acc_rsp' was not declared. Should it be static?

Link: https://lore.kernel.org/r/20200107014956.41748-1-yuehaibing@huawei.comReported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull compat_ioctl cleanup from Arnd. Here's his description:

This series concludes the work I did for linux-5.5 on the compat_ioctl()
cleanup, killing off fs/compat_ioctl.c and block/compat_ioctl.c by moving
everything into drivers.

Overall this would be a reduction both in complexity and line count, but
as I'm also adding documentation the overall number of lines increases
in the end.

My plan was originally to keep the SCSI and block parts separate.
This did not work easily because of interdependencies: I cannot
do the final SCSI cleanup in a good way without first addressing the
CDROM ioctls, so this is one series that I hope could be merged through
either the block or the scsi git trees, or possibly both if you can
pull in the same branch.

The series comes in these steps:

1. clean up the sg v3 interface as suggested by Linus. I have
   talked about this with Doug Gilbert as well, and he would
   rebase his sg v4 patches on top of "compat: scsi: sg: fix v3
   compat read/write interface"

2. Actually moving handlers out of block/compat_ioctl.c and
   block/scsi_ioctl.c into drivers, mixed in with cleanup
   patches

3. Document how to do this right. I keep getting asked about this,
   and it helps to point to some documentation file.

The branch is based on another one that fixes a couple of bugs found
during the creation of this series.

Changes since v3:
  https://lore.kernel.org/lkml/20200102145552.1853992-1-arnd@arndb.de/

- Move sr_compat_ioctl fixup to correct patch (Ben Hutchings)
- Add Reviewed-by tags

Changes since v2:
  https://lore.kernel.org/lkml/20191217221708.3730997-1-arnd@arndb.de/

- Rebase to v5.5-rc4, which contains the earlier bugfixes
- Fix sr_block_compat_ioctl() error handling bug found by
  Ben Hutchings
- Fix idecd_locked_compat_ioctl() compat_ptr() bug
- Don't try to handle HDIO_DRIVE_TASKFILE in drivers/ide
- More documentation improvements

Changes since v1:
  https://lore.kernel.org/lkml/20191211204306.1207817-1-arnd@arndb.de/

- move out the bugfixes into a branch for itself
- clean up scsi sg driver further as suggested by Christoph Hellwig
- avoid some ifdefs by moving compat_ptr() out of asm/compat.h
- split out the blkdev_compat_ptr_ioctl function; bug spotted by
  Ben Hutchings
- Improve formatting of documentation
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Documentation/process/botching-up-ioctls.rst was orignally written as
a blog post for DRM driver writers, so it it misses some points while
going into a lot of detail on others.

Try to provide a replacement that addresses typical issues across a wider
range of subsystems, and follows the style of the core-api documentation
better.

Many improvements to the document are suggested by Ben Hutchings
<ben.hutchings@codethink.co.uk>, Jonathan Corbet <corbet@lwn.net> and
Geert Uytterhoeven <geert@linux-m68k.org>.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Having separate implementations of blkdev_ioctl() often leads to these
getting out of sync, despite the comment at the top.

Since most of the ioctl commands are compatible, and we try very hard
not to add any new incompatible ones, move all the common bits into a
shared function and leave only the ones that are historically different
in separate functions for native/compat mode.

To deal with the compat_ptr() conversion, pass both the integer
argument and the pointer argument into the new blkdev_common_ioctl()
and make sure to always use the correct one of these.

blkdev_ioctl() is now only kept as a separate exported interfact
for drivers/char/raw.c, which lacks a compat_ioctl variant.
We should probably either move raw.c to staging if there are no
more users, or export blkdev_compat_ioctl() as well.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There is no need to go through a compat_alloc_user_space()
copy any more, just wrap the function in a small helper that
works the same way for native and compat mode.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Having both in the same file allows a number of simplifications
to the compat path, and makes it more likely that changes to
the native path get applied to the compat version as well.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Most of the HDIO ioctls are only used by the obsolete drivers/ide
subsystem, these can be handled by changing ide_cmd_ioctl() to be aware
of compat mode and doing the correct transformations in place and using
it as both native and compat handlers for all drivers.

The SCSI drivers implementing the same commands are already doing
this in the drivers, so the compat_blkdev_driver_ioctl() function
is no longer needed now.

The BLKSECTSET and HDIO_GETGEO_BIG ioctls are not implemented
in any driver any more and no longer need any conversion.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The ata_sas_scsi_ioctl() function implements a number of HDIO_* commands
for SCSI devices, it is used by all libata drivers as well as a few
drivers that support SAS attached SATA drives.

The only command that is not safe for compat ioctls here is
HDIO_GET_32BIT. Change the implementation to check for in_compat_syscall()
in order to do both cases correctly, and change all callers to use it
as both native and compat callback pointers, including the indirect
callers through sas_ioctl and ata_scsi_ioctl.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There is no need for the special cases for the cdrom ioctls any more now,
so make sure that each cdrom driver has a .compat_ioctl() callback and
calls cdrom_compat_ioctl() directly there.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Now that both native and compat ioctl syscalls are
in the same file, a couple of simplifications can
be made, bringing the implementation closer together:

- do_vfs_ioctl(), ioctl_preallocate(), and compat_ioctl_preallocate()
  can become static, allowing the compiler to optimize better

- slightly update the coding style for consistency between
  the functions.

- rather than listing each command in two switch statements
  for the compat case, just call a single function that has
  all the common commands.

As a side-effect, FS_IOC_RESVSP/FS_IOC_RESVSP64 are now available
to x86 compat tasks, along with FS_IOC_RESVSP_32/FS_IOC_RESVSP64_32.
This is harmless for i386 emulation, and can be considered a bugfix
for x32 emulation, which never supported these in the past.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The rest of the fs/compat_ioctl.c file is no longer useful now,
so move the actual syscall as planned.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Each driver calling scsi_ioctl() gets an equivalent compat_ioctl()
handler that implements the same commands by calling scsi_compat_ioctl().

The scsi_cmd_ioctl() and scsi_cmd_blk_ioctl() functions are compatible
at this point, so any driver that calls those can do so for both native
and compat mode, with the argument passed through compat_ptr().

With this, we can remove the entries from fs/compat_ioctl.c.  The new
code is larger, but should be easier to maintain and keep updated with
newly added commands.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Rather than relying on fs/compat_ioctl.c, this adds support
for a compat_ioctl() callback in the ide-floppy driver directly,
which lets it translate the scsi commands.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

bsg_ioctl() calls into scsi_cmd_ioctl() for a couple of generic commands
and relies on fs/compat_ioctl.c to handle it correctly in compat mode.

Adding a private compat_ioctl() handler avoids that round-trip and lets
us get rid of the generic emulation once this is done.

Note that bsg implements an SG_IO command that is different from the
other drivers and does not need emulation.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

In order to move the compat handling for SCSI ioctl commands out of
fs/compat_ioctl.c into the individual drivers, we need a helper function
first to match the native ioctl handler called by sd, sr, st, etc.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Various block drivers implement the CDROMMULTISESSION,
CDROM_GET_CAPABILITY, and CDROMEJECT ioctl commands, relying on the
block layer to handle compat_ioctl mode for them.

Move this into the drivers directly as a preparation for simplifying
the block layer later.

When only integer arguments or no arguments are passed, the
same handler can be used for .ioctl and .compat_ioctl, and
when only pointer arguments are passed, the newly added
blkdev_compat_ptr_ioctl can be used.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This is the only ioctl command that does not have a proper
compat handler. Making the normal implementation do the
right thing is actually very simply, so just do that by
using an in_compat_syscall() check to avoid the special
case in the pkcdvd driver.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Again, there is only one file that needs this, so move the conversion
handler into the native implementation.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There is only one implementation of this ioctl, so move the handling out
of the common block layer code into the place where it's actually needed.

It also gets called indirectly through pktcdvd, which needs to be aware
of this change.

As I noticed, the old implementation of the compat handler failed to
convert the structure on the way out, so the updated fields never got
written back to user space. This is either not important, or it has
never worked and should be fixed now.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

These drivers implement the HDIO_GET_IDENTITY and CDROMVOLREAD ioctl
commands, which are compatible between 32-bit and 64-bit user space and
traditionally handled by compat_blkdev_driver_ioctl().

As a prerequisite to removing that function, make both drivers use
blkdev_compat_ptr_ioctl() as their .compat_ioctl callback.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

A lot of block drivers need only a trivial .compat_ioctl callback.

Add a helper function that can be set as the callback pointer
to only convert the argument using the compat_ptr() conversion
and otherwise assume all input and output data is compatible,
or handled using in_compat_syscall() checks.

This mirrors the compat_ptr_ioctl() helper function used in
character devices.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

In the v5.4 merge window, a cleanup patch from Al Viro conflicted
with my rework of the compat handling for sg.c read(). Linus Torvalds
did a correct merge but pointed out that the resulting code is still
unsatisfactory.

I later noticed that the sg_new_read() function still gets the compat
mode wrong, when the 'count' argument is large enough to pass a
compat_sg_io_hdr object, but not a nativ sg_io_hdr.

To address both of these, move the definition of compat_sg_io_hdr
into a scsi/sg.h to make it visible to sg.c and rewrite the logic
for reading req_pack_id as well as the size check to a simpler
version that gets the expected results.

Fixes: c35a5cfb ("scsi: sg: sg_read(): simplify reading ->pack_id of userland sg_io_hdr_t")
Fixes: 98aaaec4 ("compat_ioctl: reimplement SG_IO handling")
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>