The "len" variable is uninitialize.

Fixes: 6a82582d ("HID: ft260: add usb hid to i2c host bridge driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The FTDI FT260 chip implements USB to I2C/UART bridges through two
USB HID class interfaces. The first - for I2C, and the second for UART.
Each interface is independent, and the kernel detects it as a separate
USB hidraw device.

This commit adds I2C host adapter support.
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Tested-by: Aaron Jones (FTDI-UK) <aaron.jones@ftdichip.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - support for "Unified Battery" feature on Logitech devices from Filipe
   Laíns

 - power management improvements for intel-ish driver from Zhang Lixu

 - support for Goodix devices from Douglas Anderson

 - improved handling of generic HID keyboard in order to make it easier
   for userspace to figure out the details of the device, from Dmitry
   Torokhov

 - Playstation DualSense support from Roderick Colenbrander

 - other assorted small fixes and device ID additions.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (49 commits)
  HID: playstation: add DualSense player LED support.
  HID: playstation: add microphone mute support for DualSense.
  HID: playstation: add initial DualSense lightbar support.
  HID: wacom: Ignore attempts to overwrite the touch_max value from HID
  HID: playstation: fix array size comparison (off-by-one)
  HID: playstation: fix unused variable in ps_battery_get_property.
  HID: playstation: report DualSense hardware and firmware version.
  HID: playstation: add DualSense classic rumble support.
  HID: playstation: add DualSense Bluetooth support.
  HID: playstation: track devices in list.
  HID: playstation: add DualSense accelerometer and gyroscope support.
  HID: playstation: add DualSense touchpad support.
  HID: playstation: add DualSense battery support.
  HID: playstation: use DualSense MAC address as unique identifier.
  HID: playstation: initial DualSense USB support.
  HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E
  HID: Ignore battery for Elan touchscreen on HP Spectre X360 15-df0xxx
  HID: logitech-dj: add support for the new lightspeed connection iteration
  HID: intel-ish-hid: ipc: Add Tiger Lake H PCI device ID
  HID: logitech-dj: add support for keyboard events in eQUAD step 4 Gaming
  ...

Commit 0da6bcd9 ("scripts: dtc: Build fdtoverlay tool") enabled
building fdtoverlay, but failed to add it to .gitignore.

Also add a note to keep hostprogs in sync with .gitignore.

Fixes: 0da6bcd9 ("scripts: dtc: Build fdtoverlay tool")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull gfs2 updates from Andreas Gruenbacher:

 - Log space and revoke accounting rework to fix some failed asserts.

 - Local resource group glock sharing for better local performance.

 - Add support for version 1802 filesystems: trusted xattr support and
   '-o rgrplvb' mounts by default.

 - Actually synchronize on the inode glock's FREEING bit during withdraw
   ("gfs2: fix glock confusion in function signal_our_withdraw").

 - Fix parallel recovery of multiple journals ("gfs2: keep bios separate
   for each journal").

 - Various other bug fixes.

* tag 'gfs2-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (49 commits)
  gfs2: Don't get stuck with I/O plugged in gfs2_ail1_flush
  gfs2: Per-revoke accounting in transactions
  gfs2: Rework the log space allocation logic
  gfs2: Minor calc_reserved cleanup
  gfs2: Use resource group glock sharing
  gfs2: Allow node-wide exclusive glock sharing
  gfs2: Add local resource group locking
  gfs2: Add per-reservation reserved block accounting
  gfs2: Rename rs_{free -> requested} and rd_{reserved -> requested}
  gfs2: Check for active reservation in gfs2_release
  gfs2: Don't search for unreserved space twice
  gfs2: Only pass reservation down to gfs2_rbm_find
  gfs2: Also reflect single-block allocations in rgd->rd_extfail_pt
  gfs2: Recursive gfs2_quota_hold in gfs2_iomap_end
  gfs2: Add trusted xattr support
  gfs2: Enable rgrplvb for sb_fs_format 1802
  gfs2: Don't skip dlm unlock if glock has an lvb
  gfs2: Lock imbalance on error path in gfs2_recover_one
  gfs2: Move function gfs2_ail_empty_tr
  gfs2: Get rid of current_tail()
  ...

Pull idmapped mounts from Christian Brauner:
 "This introduces idmapped mounts which has been in the making for some
  time. Simply put, different mounts can expose the same file or
  directory with different ownership. This initial implementation comes
  with ports for fat, ext4 and with Christoph's port for xfs with more
  filesystems being actively worked on by independent people and
  maintainers.

  Idmapping mounts handle a wide range of long standing use-cases. Here
  are just a few:

   - Idmapped mounts make it possible to easily share files between
     multiple users or multiple machines especially in complex
     scenarios. For example, idmapped mounts will be used in the
     implementation of portable home directories in
     systemd-homed.service(8) where they allow users to move their home
     directory to an external storage device and use it on multiple
     computers where they are assigned different uids and gids. This
     effectively makes it possible to assign random uids and gids at
     login time.

   - It is possible to share files from the host with unprivileged
     containers without having to change ownership permanently through
     chown(2).

   - It is possible to idmap a container's rootfs and without having to
     mangle every file. For example, Chromebooks use it to share the
     user's Download folder with their unprivileged containers in their
     Linux subsystem.

   - It is possible to share files between containers with
     non-overlapping idmappings.

   - Filesystem that lack a proper concept of ownership such as fat can
     use idmapped mounts to implement discretionary access (DAC)
     permission checking.

   - They allow users to efficiently changing ownership on a per-mount
     basis without having to (recursively) chown(2) all files. In
     contrast to chown (2) changing ownership of large sets of files is
     instantenous with idmapped mounts. This is especially useful when
     ownership of a whole root filesystem of a virtual machine or
     container is changed. With idmapped mounts a single syscall
     mount_setattr syscall will be sufficient to change the ownership of
     all files.

   - Idmapped mounts always take the current ownership into account as
     idmappings specify what a given uid or gid is supposed to be mapped
     to. This contrasts with the chown(2) syscall which cannot by itself
     take the current ownership of the files it changes into account. It
     simply changes the ownership to the specified uid and gid. This is
     especially problematic when recursively chown(2)ing a large set of
     files which is commong with the aforementioned portable home
     directory and container and vm scenario.

   - Idmapped mounts allow to change ownership locally, restricting it
     to specific mounts, and temporarily as the ownership changes only
     apply as long as the mount exists.

  Several userspace projects have either already put up patches and
  pull-requests for this feature or will do so should you decide to pull
  this:

   - systemd: In a wide variety of scenarios but especially right away
     in their implementation of portable home directories.

         https://systemd.io/HOME_DIRECTORY/

   - container runtimes: containerd, runC, LXD:To share data between
     host and unprivileged containers, unprivileged and privileged
     containers, etc. The pull request for idmapped mounts support in
     containerd, the default Kubernetes runtime is already up for quite
     a while now: https://github.com/containerd/containerd/pull/4734

   - The virtio-fs developers and several users have expressed interest
     in using this feature with virtual machines once virtio-fs is
     ported.

   - ChromeOS: Sharing host-directories with unprivileged containers.

  I've tightly synced with all those projects and all of those listed
  here have also expressed their need/desire for this feature on the
  mailing list. For more info on how people use this there's a bunch of
  talks about this too. Here's just two recent ones:

      https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
      https://fosdem.org/2021/schedule/event/containers_idmap/

  This comes with an extensive xfstests suite covering both ext4 and
  xfs:

      https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts

  It covers truncation, creation, opening, xattrs, vfscaps, setid
  execution, setgid inheritance and more both with idmapped and
  non-idmapped mounts. It already helped to discover an unrelated xfs
  setgid inheritance bug which has since been fixed in mainline. It will
  be sent for inclusion with the xfstests project should you decide to
  merge this.

  In order to support per-mount idmappings vfsmounts are marked with
  user namespaces. The idmapping of the user namespace will be used to
  map the ids of vfs objects when they are accessed through that mount.
  By default all vfsmounts are marked with the initial user namespace.
  The initial user namespace is used to indicate that a mount is not
  idmapped. All operations behave as before and this is verified in the
  testsuite.

  Based on prior discussions we want to attach the whole user namespace
  and not just a dedicated idmapping struct. This allows us to reuse all
  the helpers that already exist for dealing with idmappings instead of
  introducing a whole new range of helpers. In addition, if we decide in
  the future that we are confident enough to enable unprivileged users
  to setup idmapped mounts the permission checking can take into account
  whether the caller is privileged in the user namespace the mount is
  currently marked with.

  The user namespace the mount will be marked with can be specified by
  passing a file descriptor refering to the user namespace as an
  argument to the new mount_setattr() syscall together with the new
  MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
  of extensibility.

  The following conditions must be met in order to create an idmapped
  mount:

   - The caller must currently have the CAP_SYS_ADMIN capability in the
     user namespace the underlying filesystem has been mounted in.

   - The underlying filesystem must support idmapped mounts.

   - The mount must not already be idmapped. This also implies that the
     idmapping of a mount cannot be altered once it has been idmapped.

   - The mount must be a detached/anonymous mount, i.e. it must have
     been created by calling open_tree() with the OPEN_TREE_CLONE flag
     and it must not already have been visible in the filesystem.

  The last two points guarantee easier semantics for userspace and the
  kernel and make the implementation significantly simpler.

  By default vfsmounts are marked with the initial user namespace and no
  behavioral or performance changes are observed.

  The manpage with a detailed description can be found here:

      https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8

  In order to support idmapped mounts, filesystems need to be changed
  and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
  patches to convert individual filesystem are not very large or
  complicated overall as can be seen from the included fat, ext4, and
  xfs ports. Patches for other filesystems are actively worked on and
  will be sent out separately. The xfstestsuite can be used to verify
  that port has been done correctly.

  The mount_setattr() syscall is motivated independent of the idmapped
  mounts patches and it's been around since July 2019. One of the most
  valuable features of the new mount api is the ability to perform
  mounts based on file descriptors only.

  Together with the lookup restrictions available in the openat2()
  RESOLVE_* flag namespace which we added in v5.6 this is the first time
  we are close to hardened and race-free (e.g. symlinks) mounting and
  path resolution.

  While userspace has started porting to the new mount api to mount
  proper filesystems and create new bind-mounts it is currently not
  possible to change mount options of an already existing bind mount in
  the new mount api since the mount_setattr() syscall is missing.

  With the addition of the mount_setattr() syscall we remove this last
  restriction and userspace can now fully port to the new mount api,
  covering every use-case the old mount api could. We also add the
  crucial ability to recursively change mount options for a whole mount
  tree, both removing and adding mount options at the same time. This
  syscall has been requested multiple times by various people and
  projects.

  There is a simple tool available at

      https://github.com/brauner/mount-idmapped

  that allows to create idmapped mounts so people can play with this
  patch series. I'll add support for the regular mount binary should you
  decide to pull this in the following weeks:

  Here's an example to a simple idmapped mount of another user's home
  directory:

	u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt

	u1001@f2-vm:/$ ls -al /home/ubuntu/
	total 28
	drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
	drwxr-xr-x 4 root   root   4096 Oct 28 04:00 ..
	-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
	-rw-r--r-- 1 ubuntu ubuntu  220 Feb 25  2020 .bash_logout
	-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25  2020 .bashrc
	-rw-r--r-- 1 ubuntu ubuntu  807 Feb 25  2020 .profile
	-rw-r--r-- 1 ubuntu ubuntu    0 Oct 16 16:11 .sudo_as_admin_successful
	-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo

	u1001@f2-vm:/$ ls -al /mnt/
	total 28
	drwxr-xr-x  2 u1001 u1001 4096 Oct 28 22:07 .
	drwxr-xr-x 29 root  root  4096 Oct 28 22:01 ..
	-rw-------  1 u1001 u1001 3154 Oct 28 22:12 .bash_history
	-rw-r--r--  1 u1001 u1001  220 Feb 25  2020 .bash_logout
	-rw-r--r--  1 u1001 u1001 3771 Feb 25  2020 .bashrc
	-rw-r--r--  1 u1001 u1001  807 Feb 25  2020 .profile
	-rw-r--r--  1 u1001 u1001    0 Oct 16 16:11 .sudo_as_admin_successful
	-rw-------  1 u1001 u1001 1144 Oct 28 00:43 .viminfo

	u1001@f2-vm:/$ touch /mnt/my-file

	u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file

	u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file

	u1001@f2-vm:/$ ls -al /mnt/my-file
	-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file

	u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
	-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file

	u1001@f2-vm:/$ getfacl /mnt/my-file
	getfacl: Removing leading '/' from absolute path names
	# file: mnt/my-file
	# owner: u1001
	# group: u1001
	user::rw-
	user:u1001:rwx
	group::rw-
	mask::rwx
	other::r--

	u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
	getfacl: Removing leading '/' from absolute path names
	# file: home/ubuntu/my-file
	# owner: ubuntu
	# group: ubuntu
	user::rw-
	user:ubuntu:rwx
	group::rw-
	mask::rwx
	other::r--"

* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
  xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
  xfs: support idmapped mounts
  ext4: support idmapped mounts
  fat: handle idmapped mounts
  tests: add mount_setattr() selftests
  fs: introduce MOUNT_ATTR_IDMAP
  fs: add mount_setattr()
  fs: add attr_flags_to_mnt_flags helper
  fs: split out functions to hold writers
  namespace: only take read lock in do_reconfigure_mnt()
  mount: make {lock,unlock}_mount_hash() static
  namespace: take lock_mount_hash() directly when changing flags
  nfs: do not export idmapped mounts
  overlayfs: do not mount on top of idmapped mounts
  ecryptfs: do not mount on top of idmapped mounts
  ima: handle idmapped mounts
  apparmor: handle idmapped mounts
  fs: make helpers idmap mount aware
  exec: handle idmapped mounts
  would_dump: handle idmapped mounts
  ...

Pull percpu updates from Dennis Zhou:
 "Percpu had a cleanup come in that makes use of the cpu bitmask helpers
  instead of the current iterative approach.

  This clean up then had an adverse interaction when clang's inlining
  sensitivity is changed such that not all sites are inlined resulting
  in modpost being upset with section mismatch due to percpu setup being
  marked __init.

  That was fixed by introducing __flatten to compiler_attributes.h"

* 'for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: fix clang modpost section mismatch
  percpu: reduce the number of cpu distance comparisons

The removal of EXPORT_UNUSED_SYMBOL() in commit 36794822 looks like
(and was sold as) a no-op, but it actually had a rather serious and
subtle side effect: the UNUSED_SYMBOLS option not only enabled the
removed (unused) functionality, it also _disabled_ the TRIM_UNUSED_KSYMS
functionality.

And it turns out that TRIM_UNUSED_KSYMS is a huge time waste, and takes
up a third of the kernel build time for me.  For no actual upside, since
no distro is likely to ever be able to enable it (because they all
support external kernel modules).

Rather than re-enable EXPORT_UNUSED_SYMBOL, this just disables the
TRIM_UNUSED_KSYMS option by marking it broken.  I'm tempted to just
remove the support entirely, but maybe somebody has a use-case and can
fix the behavior of it.

I could have just disabled it for COMPILE_TEST, but it really smells
like the TRIM_UNUSED_KSYMS option is badly done and not really useful,
so this takes the more direct approach - let's see if anybody ever
actually notices or complains.

Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jessica Yu <jeyu@kernel.org>
Fixes: 36794822 ("module: remove EXPORT_UNUSED_SYMBOL*")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull module updates from Jessica Yu:

 - Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
   export types were introduced between 2006 - 2008. All the of the
   unused symbols have been long removed and gpl future symbols were
   converted to gpl quite a long time ago, and I don't believe these
   export types have been used ever since. So, I think it should be safe
   to retire those export types now (Christoph Hellwig)

 - Refactor and clean up some aged code cruft in the module loader
   (Christoph Hellwig)

 - Build {,module_}kallsyms_on_each_symbol only when livepatching is
   enabled, as it is the only caller (Christoph Hellwig)

 - Unexport find_module() and module_mutex and fix the last module
   callers to not rely on these anymore. Make module_mutex internal to
   the module loader (Christoph Hellwig)

 - Harden ELF checks on module load and validate ELF structures before
   checking the module signature (Frank van der Linden)

 - Fix undefined symbol warning for clang (Fangrui Song)

 - Fix smatch warning (Dan Carpenter)

* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: potential uninitialized return in module_kallsyms_on_each_symbol()
  module: remove EXPORT_UNUSED_SYMBOL*
  module: remove EXPORT_SYMBOL_GPL_FUTURE
  module: move struct symsearch to module.c
  module: pass struct find_symbol_args to find_symbol
  module: merge each_symbol_section into find_symbol
  module: remove each_symbol_in_section
  module: mark module_mutex static
  kallsyms: only build {,module_}kallsyms_on_each_symbol when required
  kallsyms: refactor {,module_}kallsyms_on_each_symbol
  module: use RCU to synchronize find_module
  module: unexport find_module and module_mutex
  drm: remove drm_fb_helper_modinit
  powerpc/powernv: remove get_cxl_module
  module: harden ELF info handling
  module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols

Pull microblaze updates from Michal Simek:

 - Fix DTB alignment

 - Remove code for very old GCC versions

 - Remove TRACING_SUPPORT selection

* tag 'microblaze-v5.12' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix built-in DTB alignment to be 8-byte aligned
  microblaze: Remove support for gcc < 4
  microblaze: do not select TRACING_SUPPORT directly

In gfs2_ail1_flush, we're using I/O plugging to give the block layer a
better chance of merging I/O requests.  If we're too aggressive here, we
can end up waiting on I/O to complete while still plugged.  Fix that in
a way similar to writeback_sb_inodes, except that we can't use
blk_flush_plug because blk_flush_plug_list is not exported.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Pull objtool updates from Thomas Gleixner:

 - Make objtool work for big-endian cross compiles

 - Make stack tracking via stack pointer memory operations match
   push/pop semantics to prepare for architectures w/o PUSH/POP
   instructions.

 - Add support for analyzing alternatives

 - Improve retpoline detection and handling

 - Improve assembly code coverage on x86

 - Provide support for inlined stack switching

* tag 'objtool-core-2021-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  objtool: Support stack-swizzle
  objtool,x86: Additionally decode: mov %rsp, (%reg)
  x86/unwind/orc: Change REG_SP_INDIRECT
  x86/power: Support objtool validation in hibernate_asm_64.S
  x86/power: Move restore_registers() to top of the file
  x86/power: Annotate indirect branches as safe
  x86/acpi: Support objtool validation in wakeup_64.S
  x86/acpi: Annotate indirect branch as safe
  x86/ftrace: Support objtool vmlinux.o validation in ftrace_64.S
  x86/xen/pvh: Annotate indirect branch as safe
  x86/xen: Support objtool vmlinux.o validation in xen-head.S
  x86/xen: Support objtool validation in xen-asm.S
  objtool: Add xen_start_kernel() to noreturn list
  objtool: Combine UNWIND_HINT_RET_OFFSET and UNWIND_HINT_FUNC
  objtool: Add asm version of STACK_FRAME_NON_STANDARD
  objtool: Assume only ELF functions do sibling calls
  x86/ftrace: Add UNWIND_HINT_FUNC annotation for ftrace_stub
  objtool: Support retpoline jump detection for vmlinux.o
  objtool: Fix ".cold" section suffix check for newer versions of GCC
  objtool: Fix retpoline detection in asm code
  ...

Merge branches 'rgrp-glock-sharing' and 'gfs2-revoke' from https://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git

Merge the resource group glock sharing feature and the revoke accounting rework.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Pull clang LTO updates from Kees Cook:
 "Clang Link Time Optimization.

  This is built on the work done preparing for LTO by arm64 folks,
  tracing folks, etc. This includes the core changes as well as the
  remaining pieces for arm64 (LTO has been the default build method on
  Android for about 3 years now, as it is the prerequisite for the
  Control Flow Integrity protections).

  While x86 LTO enablement is done, it depends on some pending objtool
  clean-ups. It's possible that I'll send a "part 2" pull request for
  LTO that includes x86 support.

  For merge log posterity, and as detailed in commit dc5723b0
  ("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
  build:

        make LLVM=1 LLVM_IAS=1 defconfig
        scripts/config -e LTO_CLANG_THIN
        make LLVM=1 LLVM_IAS=1

  (To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
  and "ARCH=arm64" to the "make" command lines.)

  Summary:

   - Clang LTO build infrastructure and arm64-specific enablement (Sami
     Tolvanen)

   - Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"

* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
  arm64: allow LTO to be selected
  arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
  arm64: vdso: disable LTO
  drivers/misc/lkdtm: disable LTO for rodata.o
  efi/libstub: disable LTO
  scripts/mod: disable LTO for empty.c
  modpost: lto: strip .lto from module names
  PCI: Fix PREL32 relocations for LTO
  init: lto: fix PREL32 relocations
  init: lto: ensure initcall ordering
  kbuild: lto: add a default list of used symbols
  kbuild: lto: merge module sections
  kbuild: lto: limit inlining
  kbuild: lto: fix module versioning
  kbuild: add support for Clang LTO
  tracing: move function tracer options to Kconfig

- Trust Panora support improvements from Cristian Klein

- tilt support on Sony Guitar Hero devices from Sanjay Govind

- Playstation DualSense support from Roderick Colenbrander

- hid-multitouch devices should be put into high-latency mode when
  suspended in order to be in line with Windows Precision Touchpad
  guidelines. From Blaž Hrastnik.

- support for "Unified Battery (1004) feature" from Filipe Laíns

- power management improvements for intel-ish driver from Zhang Lixu

- ACPI and OF support made more generic / decoupled. From Douglas Anderson
- support for Goodix devices from Douglas Anderson

- User experience improvements for hid-google from Nicolas Boichat

- HID documentation fixes from Randy Dunlap

- KEY_RFKILL support for Chicony devices from Jian-Hong Pan

- improved handling of generic HID keyboard (no more splitting system
  and consumer controls away), in order to make it easier for userspace
  to figure out the details of the device easier. From Dmitry Torokhov.

- report data sanitization fixes from Will McVicker and Randy Dunlap

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.12 kernel.

  This time a calm set with no core changes.

  New drivers/subdrivers:

   - Renesas R8A7790A0 pin controller.

   - Allwinner H616 and H616-R pin controllers.

   - Qualcomm SM8350 and SC8180x pin controllers.

  Improvements:

   - Redo the DT bindings for Ralink RT2880.

   - A common Qualcomm TLMM DT binding in YAML.

   - Delete the unused drivers for U300, COH901, Sirf Atlas, and ZTE ZX"

* tag 'pinctrl-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (71 commits)
  pinctrl: mediatek: Fix trigger type setting follow for unexpected interrupt
  dt-bindings: pinctrl: Group tuples in pin control properties
  pinctrl: nuvoton: npcm7xx: Fix alignment of table header comment
  pinctrl: at91-pio4: fix "Prefer 'unsigned int' to bare use of 'unsigned'"
  pinctrl: at91-pio4: add support for slew-rate
  dt-bindings: pinctrl: at91-pio4: add slew-rate
  pinctrl: actions: Add depends on || COMPILE_TEST
  pinctrl: single: set function name when adding function
  pinctrl: qcom: Add sc8180x TLMM driver
  dt-bindings: pinctrl: qcom: Add sc8180x binding
  dt-bindings: pinctrl: qcom: Define common TLMM binding
  pinctrl: qcom: Add SM8350 pinctrl driver
  dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
  pinctrl: samsung: use raw_spinlock for s3c64xx
  dt-bindings: mediatek: mt8192: Fix dt_binding_check warning
  pinctrl: qcom: spmi-mpp: Add PM8019 compatible
  pinctrl: pinmux: add function selector to pinmux-functions
  pinctrl: samsung: use raw_spinlock for locking
  pinctrl: clarify #pinctrl-cells for pinctrl-single,pins
  pinctrl: actions: Add the platform dependency to drivers
  ...

Pull IPMI update from Corey Minyard:
 "Only one change, but it's required for other things, so it needs to go
  in"

* tag 'for-linus-5.12-1' of git://github.com/cminyard/linux-ipmi:
  ipmi: remove open coded version of SMBus block write

Pull follow_pfn() updates from Daniel Vetter:
 "Fixes around VM_FPNMAP and follow_pfn:

   - replace mm/frame_vector.c by get_user_pages in misc/habana and
     drm/exynos drivers, then move that into media as it's sole user

   - close race in generic_access_phys

   - s390 pci ioctl fix of this series landed in 5.11 already

   - properly revoke iomem mappings (/dev/mem, pci files)"

* tag 'topic/iomem-mmap-vs-gup-2021-02-22' of git://anongit.freedesktop.org/drm/drm:
  PCI: Revoke mappings like devmem
  PCI: Also set up legacy files only after sysfs init
  sysfs: Support zapping of binary attr mmaps
  resource: Move devmem revoke code to resource framework
  /dev/mem: Only set filp->f_mapping
  PCI: Obey iomem restrictions for procfs mmap
  mm: Close race in generic_access_phys
  media: videobuf2: Move frame_vector into media subsystem
  mm/frame-vector: Use FOLL_LONGTERM
  misc/habana: Use FOLL_LONGTERM for userptr
  misc/habana: Stop using frame_vector helpers
  drm/exynos: Use FOLL_LONGTERM for g2d cmdlists
  drm/exynos: Stop using frame_vector helpers

Pull kcmp kconfig update from Daniel Vetter:
 "Make the kcmp syscall available independently of checkpoint/restore.

  drm userspaces uses this, systemd uses this, so makes sense to pull it
  out from the checkpoint-restore bundle.

  Kees reviewed this from security pov and is happy with the final
  version"

Link: https://lwn.net/Articles/845448/

* tag 'topic/kcmp-kconfig-2021-02-22' of git://anongit.freedesktop.org/drm/drm:
  kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE

Merge branch 'userns-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull user namespace update from Eric Biederman:
 "There are several pieces of active development, but only a single
  change made it through the gauntlet to be ready for v5.12. That change
  is tightening up the semantics of the v3 capabilities xattr. It is
  just short of being a bug-fix/security issue as no user space is known
  to even generate the problem case"

* 'userns-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  capabilities: Don't allow writing ambiguous v3 file capabilities

Pull qorkqueue updates from Tejun Heo:
 "Tracepoint and comment updates only"

* 'for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Use %s instead of function name
  workqueue: tracing the name of the workqueue instead of it's address
  workqueue: fix annotation for WQ_SYSFS

Pull cgroup updates from Tejun Heo:
 "Nothing interesting. Just two minor patches"

* 'for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: fix typos in comments
  cgroup: cgroup.{procs,threads} factor out common parts

Pull powerpc updates from Michael Ellerman:

 - A large series adding wrappers for our interrupt handlers, so that
   irq/nmi/user tracking can be isolated in the wrappers rather than
   spread in each handler.

 - Conversion of the 32-bit syscall handling into C.

 - A series from Nick to streamline our TLB flushing when using the
   Radix MMU.

 - Switch to using queued spinlocks by default for 64-bit server CPUs.

 - A rework of our PCI probing so that it happens later in boot, when
   more generic infrastructure is available.

 - Two small fixes to allow 32-bit little-endian processes to run on
   64-bit kernels.

 - Other smaller features, fixes & cleanups.

Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang
Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian
Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong,
Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu,
Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen
Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun.

* tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits)
  powerpc/perf: Adds support for programming of Thresholding in P10
  powerpc/pci: Remove unimplemented prototypes
  powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user()
  powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size()
  powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user()
  powerpc/64: Fix stack trace not displaying final frame
  powerpc/time: Remove get_tbl()
  powerpc/time: Avoid using get_tbl()
  spi: mpc52xx: Avoid using get_tbl()
  powerpc/syscall: Avoid storing 'current' in another pointer
  powerpc/32: Handle bookE debugging in C in syscall entry/exit
  powerpc/syscall: Do not check unsupported scv vector on PPC32
  powerpc/32: Remove the counter in global_dbcr0
  powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry
  powerpc/syscall: implement system call entry/exit logic in C for PPC32
  powerpc/32: Always save non volatile GPRs at syscall entry
  powerpc/syscall: Change condition to check MSR_RI
  powerpc/syscall: Save r3 in regs->orig_r3
  powerpc/syscall: Use is_compat_task()
  powerpc/syscall: Make interrupt.c buildable on PPC32
  ...

Pull ARM updates from Russell King:

 - Generalise byte swapping assembly

 - Update debug addresses for STI

 - Validate start of physical memory with DTB

 - Do not clear SCTLR.nTLSMD in decompressor

 - amba/locomo/sa1111 devices remove method return type is void

 - address markers for KASAN in page table dump

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled
  ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void
  amba: Make use of bus_type functions
  amba: Make the remove callback return void
  vfio: platform: simplify device removal
  amba: reorder functions
  amba: Fix resource leak for drivers without .remove
  ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header
  ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions
  ARM: 9051/1: vdso: remove unneded extra-y addition
  ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible
  ARM: 9049/1: locomo: make locomo bus's remove callback return void
  ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void
  ARM: 9047/1: smp: remove unused variable
  ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
  ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB
  ARM: 9042/1: debug: no uncompress debugging while semihosting
  ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support
  ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
  ARM: 9039/1: assembler: generalize byte swapping macro into rev_l

Pull timer fixes from Thomas Gleixner:
 "A small set of clockevent fixes which fell through the cracks before
  the 5.11 release:

   - Ensure a clock is enabled on sh_cmt

   - Trivial compile fail and compile warning fixes"

* tag 'timers-urgent-2021-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined
  clocksource/drivers/sh_cmt: Make sure channel clock supply is enabled
  clocksource/drivers/ixp4xx: Select TIMER_OF when needed

Pull tracing updates from Steven Rostedt:

 - Update to the way irqs and preemption is tracked via the trace event
   PC field

 - Fix handling of unregistering event failing due to allocate memory.
   This is only triggered by failure injection, as it is pretty much
   guaranteed to have less than a page allocation succeed.

 - Do not show the useless "filter" or "enable" files for the "ftrace"
   trace system, as they have no effect on doing anything.

 - Add a warning if kprobes are registered more than once.

 - Synthetic events now have their fields parsed by semicolons. Old
   formats without semicolons will still work, but new features will
   require them.

 - New option to allow trace events to show %p without hashing in trace
   file. The trace file can only be read by root, and reading the raw
   event buffer did not have any pointers hashed, so this does not
   expose anything new.

 - New directory in tools called tools/tracing, where a new tool that
   reads sequential latency reports from the ftrace latency tracers.

 - Other minor fixes and cleanups.

* tag 'trace-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  kprobes: Fix to delay the kprobes jump optimization
  tracing/tools: Add the latency-collector to tools directory
  tracing: Make hash-ptr option default
  tracing: Add ptr-hash option to show the hashed pointer value
  tracing: Update the stage 3 of trace event macro comment
  tracing: Show real address for trace event arguments
  selftests/ftrace: Add '!event' synthetic event syntax check
  selftests/ftrace: Update synthetic event syntax errors
  tracing: Add a backward-compatibility check for synthetic event creation
  tracing: Update synth command errors
  tracing: Rework synthetic event command parsing
  tracing/dynevent: Delegate parsing to create function
  kprobes: Warn if the kprobe is reregistered
  ftrace: Remove unused ftrace_force_update()
  tracepoints: Code clean up
  tracepoints: Do not punish non static call users
  tracepoints: Remove unnecessary "data_args" macro parameter
  tracing: Do not create "enable" or "filter" files for ftrace event subsystem
  kernel: trace: preemptirq_delay_test: add cpu affinity
  tracepoint: Do not fail unregistering a probe due to memory failure
  ...

Merge tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "New features:

   - Support instruction latency in 'perf report', with both memory
     latency (weight) and instruction latency information, users can
     locate expensive load instructions and understand time spent in
     different stages.

   - Extend 'perf c2c' to display the number of loads which were blocked
     by data or address conflict.

   - Add 'perf stat' support for L2 topdown events in systems such as
     Intel's Sapphire rapids server.

   - Add support for PERF_SAMPLE_CODE_PAGE_SIZE in various tools, as a
     sort key, for instance:

        perf report --stdio --sort=comm,symbol,code_page_size

   - New 'perf daemon' command to run long running sessions while
     providing a way to control the enablement of events without
     restarting a traditional 'perf record' session.

   - Enable counting events for BPF programs in 'perf stat' just like
     for other targets (tid, cgroup, cpu, etc), e.g.:

        # perf stat -e ref-cycles,cycles -b 254 -I 1000
           1.487903822            115,200      ref-cycles
           1.487903822             86,012      cycles
           2.489147029             80,560      ref-cycles
           2.489147029             73,784      cycles
        ^C

     The example above counts 'cycles' and 'ref-cycles' of BPF program
     of id 254. It is similar to bpftool-prog-profile command, but more
     flexible.

   - Support the new layout for PERF_RECORD_MMAP2 to carry the DSO
     build-id using infrastructure generalised from the eBPF subsystem,
     removing the need for traversing the perf.data file to collect
     build-ids at the end of 'perf record' sessions and helping with
     long running sessions where binaries can get replaced in updates,
     leading to possible mis-resolution of symbols.

   - Support filtering by hex address in 'perf script'.

   - Support DSO filter in 'perf script', like in other perf tools.

   - Add namespaces support to 'perf inject'

   - Add support for SDT (Dtrace Style Markers) events on ARM64.

  perf record:

   - Fix handling of eventfd() when draining a buffer in 'perf record'.

   - Improvements to the generation of metadata events for pre-existing
     threads (mmaps, comm, etc), speeding up the work done at the start
     of system wide or per CPU 'perf record' sessions.

  Hardware tracing:

   - Initial support for tracing KVM with Intel PT.

   - Intel PT fixes for IPC

   - Support Intel PT PSB (synchronization packets) events.

   - Automatically group aux-output events to overcome --filter syntax.

   - Enable PERF_SAMPLE_DATA_SRC on ARMs SPE.

   - Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0.

  perf annotate TUI:

   - Fix handling of 'k' ("show line number") hotkey

   - Fix jump parsing for C++ code.

  perf probe:

   - Add protection to avoid endless loop.

  cgroups:

   - Avoid reading cgroup mountpoint multiple times, caching it.

   - Fix handling of cgroup v1/v2 in mixed hierarchy.

  Symbol resolving:

   - Add OCaml symbol demangling.

   - Further fixes for handling PE executables when using perf with Wine
     and .exe/.dll files.

   - Fix 'perf unwind' DSO handling.

   - Resolve symbols against debug file first, to deal with artifacts
     related to LTO.

   - Fix gap between kernel end and module start on powerpc.

  Reporting tools:

   - The DSO filter shouldn't show samples in unresolved maps.

   - Improve debuginfod support in various tools.

  build ids:

   - Fix 16-byte build ids in 'perf buildid-cache', add a 'perf test'
     entry for that case.

  perf test:

   - Support for PERF_SAMPLE_WEIGHT_STRUCT.

   - Add test case for PERF_SAMPLE_CODE_PAGE_SIZE.

   - Shell based tests for 'perf daemon's commands ('start', 'stop,
     'reconfig', 'list', etc).

   - ARM cs-etm 'perf test' fixes.

   - Add parse-metric memory bandwidth testcase.

  Compiler related:

   - Fix 'perf probe' kretprobe issue caused by gcc 11 bug when used
     with -fpatchable-function-entry.

   - Fix ARM64 build with gcc 11's -Wformat-overflow.

   - Fix unaligned access in sample parsing test.

   - Fix printf conversion specifier for IP addresses on arm64, s390 and
     powerpc.

  Arch specific:

   - Support exposing Performance Monitor Counter SPRs as part of
     extended regs on powerpc.

   - Add JSON 'perf stat' metrics for ARM64's imx8mp, imx8mq and imx8mn
     DDR, fix imx8mm ones.

   - Fix common and uarch events for ARM64's A76 and Ampere eMag"

* tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (148 commits)
  perf buildid-cache: Don't skip 16-byte build-ids
  perf buildid-cache: Add test for 16-byte build-id
  perf symbol: Remove redundant libbfd checks
  perf test: Output the sub testing result in cs-etm
  perf test: Suppress logs in cs-etm testing
  perf tools: Fix arm64 build error with gcc-11
  perf intel-pt: Add documentation for tracing virtual machines
  perf intel-pt: Split VM-Entry and VM-Exit branches
  perf intel-pt: Adjust sample flags for VM-Exit
  perf intel-pt: Allow for a guest kernel address filter
  perf intel-pt: Support decoding of guest kernel
  perf machine: Factor out machine__idle_thread()
  perf machine: Factor out machines__find_guest()
  perf intel-pt: Amend decoder to track the NR flag
  perf intel-pt: Retain the last PIP packet payload as is
  perf intel_pt: Add vmlaunch and vmresume as branches
  perf script: Add branch types for VM-Entry and VM-Exit
  perf auxtrace: Automatically group aux-output events
  perf test: Fix unaligned access in sample parsing test
  perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing
  ...

Pull more nfsd updates from Chuck Lever:
 "Here are a few additional NFSD commits for the merge window:

 Optimization:
   - Cork the socket while there are queued replies

  Fixes:
   - DRC shutdown ordering
   - svc_rdma_accept() lockdep splat"

* tag 'nfsd-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Further clean up svc_tcp_sendmsg()
  SUNRPC: Remove redundant socket flags from svc_tcp_sendmsg()
  SUNRPC: Use TCP_CORK to optimise send performance on the server
  svcrdma: Hold private mutex while invoking rdma_accept()
  nfsd: register pernet ops last, unregister first

Pull ceph updates from Ilya Dryomov:
 "With netfs helper library and fscache rework delayed, just a few cap
  handling improvements to avoid grabbing mmap_lock in some code paths
  and deal with capsnaps better and a mount option cleanup"

* tag 'ceph-for-5.12-rc1' of git://github.com/ceph/ceph-client:
  ceph: defer flushing the capsnap if the Fb is used
  libceph: remove osdtimeout option entirely
  libceph: deprecate [no]cephx_require_signatures options
  ceph: allow queueing cap/snap handling after putting cap references
  ceph: clean up inode work queueing
  ceph: fix flush_snap logic after putting caps

Pull isofs, udf, and quota updates from Jan Kara:
 "Several udf, isofs, and quota fixes"

* tag 'fs_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  parser: Fix kernel-doc markups
  udf: handle large user and group ID
  isofs: handle large user and group ID
  parser: add unsigned int parser
  udf: fix silent AED tagLocation corruption
  isofs: release buffer head before return
  quota: Fix memory leak when handling corrupted quota file