- 22 Dec, 2020 2 commits
-
-
Enrico Weigelt, metux IT consult authored
VIRTIO itself has no dependencies and therefore can easily be just select'ed, instead of depending on it. The current depends on causes any others trying to select VIRTIO to fail like this: drivers/gpu/drm/Kconfig:74:error: recursive dependency detected! drivers/gpu/drm/Kconfig:74: symbol DRM_KMS_HELPER is selected by DRM_VIRTIO_GPU drivers/gpu/drm/virtio/Kconfig:2: symbol DRM_VIRTIO_GPU depends on VIRTIO drivers/virtio/Kconfig:2: symbol VIRTIO is selected by GPIO_VIRTIO drivers/gpio/Kconfig:1618: symbol GPIO_VIRTIO depends on GPIOLIB drivers/gpio/Kconfig:14: symbol GPIOLIB is selected by I2C_MUX_LTC4306 drivers/i2c/muxes/Kconfig:47: symbol I2C_MUX_LTC4306 depends on I2C drivers/i2c/Kconfig:8: symbol I2C is selected by FB_DDC drivers/video/fbdev/Kconfig:63: symbol FB_DDC depends on FB drivers/video/fbdev/Kconfig:12: symbol FB is selected by DRM_KMS_FB_HELPER drivers/gpu/drm/Kconfig:80: symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER It seems that having both 'depends on' as well as 'select' on the same symbol sends us into big trouble, and Kconfig can't break up the circular dependency (note that in the tested configuration, neither I2C, FB or DRM are enabled at all). Perhaps we could consider this a bug in Kconfig, but the trouble can easily be circumvented by changing 'depends on' into 'select'. DRM_VIRTIO_GPU also depends on VIRTIO_MENU, so even after this change, that option will only show up if the user already enabled virtio in the config. This change didn't cause any changes in the .config after menuconfig run, so we should be completely safe here. Signed-off-by:
Enrico Weigelt, metux IT consult <info@metux.net> Reviewed-by:
Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20201204131221.2827-1-info@metux.netSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Daniel Vetter authored
I tried to fix this for real, but it's very sprawling and lots of drivers get this mildly wrong one way or the other. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Acked-by:
Simon Ser <contact@emersion.fr> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201211161113.3350061-2-daniel.vetter@ffwll.ch
-
- 17 Dec, 2020 10 commits
-
-
Simon Ser authored
Document that enabling atomic also enables universal planes and aspect ratio modes. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Pekka Paalanen <ppaalanen@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201217113220.102271-7-contact@emersion.fr
-
Simon Ser authored
User-space expects to be able to pick a primary plane for each CRTC exposed by the driver. Make sure this assumption holds in drm_mode_config_validate. Use the legacy drm_crtc.primary field to check this, because it's simpler and we require drivers to set it anyways. Accumulate a set of primary planes which are already used for a CRTC in a bitmask. Error out if a primary plane is re-used. v2: new patch v3: - Use u64 instead of __u64 (Jani) - Use `unsigned int` instead of `unsigned` (Jani) v4: - Use u32 instead of u64 for plane mask (Ville) - Use drm_plane_mask instead of BIT (Ville) - Fix typos (Ville) Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Acked-by:
Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201211184634.74534-4-contact@emersion.fr
-
Simon Ser authored
The documentation build system recognizes "struct XXX" references and generates links for them. Signed-off-by:
-
Simon Ser authored
Introduce a new "Standard Plane Properties" section for properties defined in drm_plane.c. Move the mis-placed IN_FORMATS docs there. Signed-off-by:
-
Simon Ser authored
State that the "KMS Properties" section is mainly for user-space developers. Signed-off-by:
-
Simon Ser authored
Move drm_color_mgmt function reference from the KMS properties section to the CRTC abstraction section. This makes the KMS properties section more readable for user-space developers. Signed-off-by:
-
Simon Ser authored
Move drm_damage_helper function reference from the KMS properties section to the plane abstraction section. This makes the KMS properties section more readable for user-space developers. Signed-off-by:
-
Simon Ser authored
Move drm_blend.c function reference from the KMS properties section to the plane abstraction section. This makes the KMS properties section more readable for user-space developers. Signed-off-by:
-
Simon Ser authored
Make it more human-readable. Signed-off-by:
-
Tomi Valkeinen authored
Update the maintainer email addresses for TI display drivers. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by:
Jyri Sarha <jyri.sarha@iki.fi> Acked-by:
-
- 16 Dec, 2020 14 commits
-
-
Daniel Vetter authored
Motivated by a discussion with Christian and Thomas: Try to untangle a bit what's relevant for importers and what's relevant for exporters. Also add an assert that really only dynamic importers use the api function, anything else doesn't make sense. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Daniel Vetter authored
At least amdgpu and i915 do, so lets just document this as the rule. v2: Works better with less typos (intel-gfx-ci) Reviewed-by:
-
Daniel Vetter authored
Noticed while reviewing the output. Adds a bunch more links and fixes the function interface quoting. Acked-by:
-
Daniel Vetter authored
Also try to clarify a bit when dma_buf_begin/end_cpu_access should be called. Acked-by:
-
Maxime Ripard authored
The BCM2711 supports higher bpc count than just 8, so let's support it in our driver. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-10-maxime@cerno.tech
-
Maxime Ripard authored
Unlike the previous generations, the HSM clock limitation is way above what we can reach without scrambling, so let's move the maximum frequency we support to the maximum clock frequency without scrambling. Reviewed-by:
-
Maxime Ripard authored
The PHY initialisation parameters are not based on the pixel clock but the TMDS clock rate which can be the pixel clock in the standard case, but could be adjusted based on some parameters like the bits per color. Since the TMDS clock rate is stored in our custom connector state already, let's reuse it from there instead of computing it again. Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Maxime Ripard authored
The pixel rate is for now quite simple to compute, but with more features (30 and 36 bits output, YUV output, etc.) will depend on a bunch of connectors properties. Let's store the rate we have to run the pixel clock at in our custom connector state, and compute it in atomic_check. Acked-by:
-
Maxime Ripard authored
When run with a higher bpc than 8, the clock of the HDMI controller needs to be adjusted. Let's create a connector state that will be used at atomic_check and atomic_enable to compute and store the clock rate associated to the state. Acked-by:
-
Maxime Ripard authored
drm_atomic_helper_connector_reset uses kmalloc which, from an API standpoint, can fail, and thus setting connector->state to NULL. However, our reset hook then calls drm_atomic_helper_connector_tv_reset that will access connector->state without checking if it's a valid pointer or not. Make sure we don't end up accessing a NULL pointer. Acked-by:
-
Maxime Ripard authored
Commit 63495f6b ("drm/vc4: hdmi: Make sure our clock rate is within limits") was intended to compute the pixel rate to make sure we remain within the boundaries of what the hardware can provide. However, unlike what mode_valid was checking for, we forgot to take into account the clock doubling flag that can be set for modes. Let's honor that flag if it's there. Acked-by:
-
Maxime Ripard authored
We'll need to access the connector state in our encoder setup, so let's just pass the whole DRM state to our private encoder hooks. Acked-by:
-
Maxime Ripard authored
Since the CRTC setup in vc4 is split between the PixelValves/TXP and the HVS, only the PV/TXP atomic hooks were updated in the previous commits, but it makes sense to update the HVS ones too. Reviewed-by:
-
Tian Tao authored
drm_irq_uninstall should be called before pci_disable_msi, if use devm_drm_irq_install to register the interrupt, the system will call pci_disable_msi first and then call drm_irq_uninstall, which will result in the following callstack. This reverts commit e4401247. kernel BUG at drivers/pci/msi.c:376! Internal error: Oops - BUG: 0 [#1] SMP CPU: 93 PID: 173814 Comm: rmmod Tainted: pstate: a0400009 (NzCv daif +PAN -UAO -TCO BTYPE=--) pc : free_msi_irqs+0x17c/0x1a0 lr : free_msi_irqs+0x16c/0x1a0 sp : ffff2028157f7bd0 x29: ffff2028157f7bd0 x28: ffff202849edab00 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff0020851da000 x22: ffff0020851da2d8 x21: ffff0020cc829000 x20: 0000000000000000 x19: ffff0020d6714800 x18: 0000000000000010 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff x14: ffff2028957f77df x13: ffff2028157f77ed x12: 0000000000000000 x11: 0000000000000040 x10: ffff800011b2f8e0 x9 : ffff800011b2f8d8 x8 : ffff2020203fc458 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff2020203fc430 x4 : ffff2020203fc4a0 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 00000000000002c9 x0 : ffff0020d6719500 Call trace: free_msi_irqs+0x17c/0x1a0 pci_disable_msi+0xe4/0x118 hibmc_unload+0x44/0x80 [hibmc_drm] hibmc_pci_remove+0x2c/0x38 [hibmc_drm] pci_device_remove+0x48/0x108 device_release_driver_internal+0x118/0x1f0 driver_detach+0x6c/0xe0 bus_remove_driver+0x74/0x100 driver_unregister+0x34/0x60 pci_unregister_driver+0x24/0xd8 hibmc_pci_driver_exit+0x14/0xe768 [hibmc_drm] __arm64_sys_delete_module+0x1fc/0x2d0 el0_svc_common.constprop.3+0xa8/0x188 do_el0_svc+0x80/0xa0 el0_sync_handler+0x8c/0xb0 el0_sync+0x15c/0x180 Code: f940b400 b4ffff00 a903e7b8 f90013b5 (d4210000) ---[ end trace 310d94ee8abef44f ]--- Kernel panic - not syncing: Oops - BUG: Fatal exception v2: update the commit log to indicate the patch that needs to be revert. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Acked-by:
-
- 15 Dec, 2020 14 commits
-
-
Christian König authored
We only completely delete the BO from the LRU on destruction. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Link: https://patchwork.freedesktop.org/patch/404618/
-
Christian König authored
Check the pin_count instead of the lru list is empty here. Signed-off-by:
-
Simon Ser authored
If a CRTC is missing a legacy primary plane pointer, a lot of things will be broken for user-space: fbdev stops working and the entire legacy uAPI stops working. Require all drivers to populate drm_crtc.primary to prevent these issues. Warn if it's NULL. Signed-off-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201211184634.74534-3-contact@emersion.fr
-
Simon Ser authored
If a primary or cursor plane is not compatible with a CRTC it's attached to via the legacy primary/cursor field, things will be broken for legacy user-space. v4: use drm_crtc_mask instead of BIT (Ville) Signed-off-by:
-
Simon Ser authored
The previous wording could be understood by user-space evelopers as "a primary/cursor plane is only compatible with a single CRTC" [1]. Reword the planes description to make it clear the DRM-internal drm_crtc.primary and drm_crtc.cursor planes are for legacy uAPI. [1]: https://github.com/swaywm/wlroots/pull/2333#discussion_r456788057Signed-off-by:
-
Zheng Yongjun authored
The parameter of kfree function is NULL, so kfree code is useless, delete it. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
Tomi Valkeinen authored
Panel drivers can send DSI commands in panel's prepare(), which happens before the bridge's enable() is called. The OMAP DSI driver currently only sets up the DSI interface at bridge's enable(), so prepare() cannot be used to send DSI commands. This patch fixes the issue by making it possible to enable the DSI interface any time a command is about to be sent. Disabling the interface is be done via delayed work. Clarifications for the delayed disable work and the panel doing DSI transactions: bridge_enable: If the disable callback is called just before bridge_enable takes the dsi_bus_lock, no problem, bridge_enable just enables the interface again. If the callback is ran just after bridge_enable's dsi_bus_unlock, no problem, dsi->video_enabled == true so the callback does nothing. bridge_disable: similar to bridge-enable, the callback won't do anything if video_enabled == true, and after bridge-disable has turned the video and the interface off, there's nothing to do for the callback. omap_dsi_host_detach: this is called when the panel does mipi_dsi_detach(), and we expect the panel to _not_ do any DSI transactions after (or during) mipi_dsi_detatch(), so there are no race conditions. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-85-tomi.valkeinen@ti.com
-
Tomi Valkeinen authored
We only need to set VC_CTRL:DCS_CMD_ENABLE for command mode panels when the HW has DSI_QUIRK_DCS_CMD_CONFIG_VC quirk. The old code did this right by accident, but now we set DCS_CMD_ENABLE for video mode panels too. Fix this by skipping the set for video mode. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Tomi Valkeinen authored
ULPS is a niche power-saving feature which only really affects command mode panels showing a static picture. I know the ULPS code used to work very long time ago, but I could not get it working with the current driver. As the ULPS code is not trivial and includes delayed work (so lots of chances for race issues), and just keeping DSI video and command mode panels working has been challenging enough even without ULPS, lets remove ULPS support. When the DSI driver works reliably for command and video mode displays, someone interested can work on ULPS and add it back if the power saving is substantial enough. Signed-off-by:
-
Tomi Valkeinen authored
The driver ignores MIPI_DSI_CLOCK_NON_CONTINUOUS, and always uses non-continuous clock. Fix this by using MIPI_DSI_CLOCK_NON_CONTINUOUS and at the same time, drop ddr_clk_always_on field which seems pretty useless. Signed-off-by:
-
Tomi Valkeinen authored
Clean up the code by separating video-mode enable/disable code into functions of their own. Signed-off-by:
-
Tomi Valkeinen authored
As we now have a fixed setup for VCs (VC0 for video stream, VC1 for commands), we can simplify the VC setup. Signed-off-by:
-
Tomi Valkeinen authored
The function names have evolved to be very confusing, and bunch of them have "display" in them even if the function doesn't deal with display as such (e.g. dsi_display_enable which just enables the DSI interface). Rename them by dropping the "display". Signed-off-by:
-
Tomi Valkeinen authored
We can drop dsi_display_disable() which just calls _dsi_display_disable(), and rename _dsi_display_disable() to dsi_display_disable(). The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_disable is extra and can be dropped, as _dsi_display_disable() has the same WARN_ON(). Signed-off-by:
-
