- 06 Dec, 2023 24 commits
-
-
Paolo Abeni authored
Geetha sowjanya says: ==================== octeontx2-af: miscellaneous fixes The series of patches fixes various issues related to mcs and NIX link registers. v3-v4: Used FIELD_PREP macro and proper data types. v2-v3: Fixed typo error in patch 4 commit message. v1-v2: Fixed author name for patch 5. Added Reviewed-by. ==================== Link: https://lore.kernel.org/r/20231205080434.27604-1-gakula@marvell.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Rahul Bhansali authored
On new silicons the TX channels for transmit level has increased. This patch fixes the respective register offset range to configure the newly added channels. Fixes: b279bbb3 ("octeontx2-af: NIX Tx scheduler queue config support") Signed-off-by:
Rahul Bhansali <rbhansali@marvell.com> Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
-
Geetha sowjanya authored
If mcs resources are attached to PF/VF. These resources need to be freed on FLR. This patch add missing mcs flr call on PF FLR. Fixes: bd69476e ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic") Signed-off-by:
-
Geetha sowjanya authored
This patch adds the miss mcs stats register for mcs supported platforms. Fixes: 9312150a ("octeontx2-af: cn10k: mcs: Support for stats collection") Signed-off-by:
-
Geetha sowjanya authored
On latest silicon versions SA cam entries increased to 256. This patch fixes the datatype of sa_entries in mcs_hw_info struct to u16 to hold 256 entries. Fixes: 080bbd19 ("octeontx2-af: cn10k: mcs: Add mailboxes for port related operations") Signed-off-by:
-
Nithin Dabilpuram authored
When MCS external bypass is disabled, MCS returns additional 2 credits(32B) for every packet Tx'ed on LMAC. To account for these extra credits, NIX_AF_TX_LINKX_NORM_CREDIT.CC_MCS_CNT needs to be configured as otherwise NIX Tx credits would overflow and will never be returned to idle state credit count causing issues with credit control and MTU change. This patch fixes the same by configuring CC_MCS_CNT at probe time for MCS enabled SoC's Fixes: bd69476e ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic") Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Reviewed-by:
-
Paolo Abeni authored
Dmitry Safonov says: ==================== TCP-AO fixes Changes from v4: - Dropped 2 patches on which there's no consensus. They will require more work TBD if they may made acceptable. Those are: o "net/tcp: Allow removing current/rnext TCP-AO keys on TCP_LISTEN sockets" o "net/tcp: Store SNEs + SEQs on ao_info" Changes from v3: - Don't restrict adding any keys on TCP-AO connection in VRF, but only the ones that don't match l3index (David) Changes from v2: - rwlocks are problematic in net code (Paolo) Changed the SNE code to avoid spin/rw locks on RX/TX fastpath by double-accounting SEQ numbers for TCP-AO enabled connections. Changes from v1: - Use tcp_can_repair_sock() helper to limit TCP_AO_REPAIR (Eric) - Instead of hook to listen() syscall, allow removing current/rnext keys on TCP_LISTEN (addressing Eric's objection) - Add sne_lock to protect snd_sne/rcv_sne - Don't move used_tcp_ao in struct tcp_request_sock (Eric) I've been working on TCP-AO key-rotation selftests and as a result exercised some corner-cases that are not usually met in production. Here are a bunch of semi-related fixes: - Documentation typo (reported by Markus Elfring) - Proper alignment for TCP-AO option in TCP header that has MAC length of non 4 bytes (now a selftest with randomized maclen/algorithm/etc passes) - 3 uAPI restricting patches that disallow more things to userspace in order to prevent it shooting itself in any parts of the body - SNEs READ_ONCE()/WRITE_ONCE() that went missing by my human factor - Avoid storing MAC length from SYN header as SYN-ACK will use rnext_key.maclen (drops an extra check that fails on new selftests) ==================== Link: https://lore.kernel.org/r/Signed-off-by:
-
Dmitry Safonov authored
This extra check doesn't work for a handshake when SYN segment has (current_key.maclen != rnext_key.maclen). It could be amended to preserve rnext_key.maclen instead of current_key.maclen, but that requires a lookup on listen socket. Originally, this extra maclen check was introduced just because it was cheap. Drop it and convert tcp_request_sock::maclen into boolean tcp_request_sock::used_tcp_ao. Fixes: 06b22ef2 ("net/tcp: Wire TCP-AO to request sockets") Signed-off-by:
Dmitry Safonov <dima@arista.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Dmitry Safonov authored
If the connection was established, don't allow adding TCP-AO keys that don't match the peer. Currently, there are checks for ip-address matching, but L3 index check is missing. Add it to restrict userspace shooting itself somewhere. Yet, nothing restricts the CAP_NET_RAW user from trying to shoot themselves by performing setsockopt(SO_BINDTODEVICE) or setsockopt(SO_BINDTOIFINDEX) over an established TCP-AO connection. So, this is just "minimum effort" to potentially save someone's debugging time, rather than a full restriction on doing weird things. Fixes: 248411b8 ("net/tcp: Wire up l3index to TCP-AO") Signed-off-by:
-
Dmitry Safonov authored
Listen socket is not an established TCP connection, so setsockopt(TCP_AO_REPAIR) doesn't have any impact. Restrict this uAPI for listen sockets. Fixes: faadfaba ("net/tcp: Add TCP_AO_REPAIR") Signed-off-by:
-
Dmitry Safonov authored
Currently functions that pre-calculate TCP header options length use unaligned TCP-AO header + MAC-length for skb reservation. And the functions that actually write TCP-AO options into skb do align the header. Nothing good can come out of this for ((maclen % 4) != 0). Provide tcp_ao_len_aligned() helper and use it everywhere for TCP header options space calculations. Fixes: 1e03d32b ("net/tcp: Add TCP-AO sign to outgoing packets") Signed-off-by:
-
Dmitry Safonov authored
Yep, my VIM spellchecker is not good enough for typos like this one. Fixes: 7fe0e38b ("Documentation/tcp: Add TCP-AO documentation") Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Reported-by:
Markus Elfring <Markus.Elfring@web.de> Closes: https://lore.kernel.org/all/2745ab4e-acac-40d4-83bf-37f2600d0c3d@web.de/Signed-off-by:
-
Paolo Abeni authored
Jijie Shao says: ==================== There are some bugfix for the HNS ethernet driver There are some bugfix for the HNS ethernet driver --- changeLog: v2 -> v3: - Refine the commit msg as Wojciech suggestions - Reconstruct the "hns_mac_link_anti_shake" function suggested by Wojciech v2: https://lore.kernel.org/all/20231204011051.4055031-1-shaojijie@huawei.com/ v1 -> v2: - Fixed the internal function is not decorated with static issue, suggested by Jakub v1: https://lore.kernel.org/all/20231201102703.4134592-1-shaojijie@huawei.com/ --- ==================== Link: https://lore.kernel.org/r/20231204143232.3221542-1-shaojijie@huawei.comSigned-off-by:
-
Yonglong Liu authored
If a xge port just connect with an optical module and no fiber, it may have a fake link up because there may be interference on the hardware. This patch adds an anti-shake to avoid the problem. And the time of anti-shake is base on tests. Fixes: b917078c ("net: hns: Add ACPI support to check SFP present") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Reviewed-by:
-
Yonglong Liu authored
Upon changing the tx feature, the hns driver will modify the maybe_stop_tx() and fill_desc() functions, if the modify happens during packet sending, will cause the hardware and software pointers do not match, and the port can not work anymore. This patch deletes the maybe_stop_tx() and fill_desc() functions modification when setting tx feature, and use the skb_is_gro() to determine which functions to use in the tx path. Fixes: 38f616da ("net:hns: Add support of ethtool TSO set option for Hip06 in HNS") Signed-off-by:
-
Daniil Maximov authored
If is_ptp_ring == true in the loop of __aq_ring_xdp_clean function, then a timestamp is stored from a packet in a field of skb object, which is not allocated at the moment of the call (skb == NULL). Generalize aq_ptp_extract_ts and other affected functions so they don't work with struct sk_buff*, but with struct skb_shared_hwtstamps*. Found by Linux Verification Center (linuxtesting.org) with SVACE Fixes: 26efaef7 ("net: atlantic: Implement xdp data plane") Signed-off-by:
Daniil Maximov <daniil31415it@gmail.com> Reviewed-by:
Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20231204085810.1681386-1-daniil31415it@gmail.comSigned-off-by:
-
Kelly Kane authored
The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by:
Kelly Kane <kelly@hawknetworks.com> Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.comSigned-off-by:
-
Shigeru Yoshida authored
In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns true. For example, applications can use PF_PACKET to create a malformed packet with no IP header. This type of packet causes a problem such as uninit-value access. This patch ensures that skb_pull() can pull the required size by checking the skb with pskb_network_may_pull() before skb_pull(). Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Reviewed-by:
Suman Ghosh <sumang@marvell.com> Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Shannon Nelson says: ==================== ionic: small driver fixes This is a pair of fixes to address a DIM issue and a kernel test robot complaint v1: https://lore.kernel.org/netdev/20231201000519.13363-1-shannon.nelson@amd.com/ ==================== Link: https://lore.kernel.org/r/20231204192234.21017-1-shannon.nelson@amd.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Brett Creeley authored
Currently ionic_dim_work() is incorrect when in split interrupt mode. This is because the interrupt rate is only being changed for the Rx side even for dim running on Tx. Fix this by using the qcq from the container_of macro. Also, introduce some local variables for a bit of cleanup. Fixes: a6ff85e0 ("ionic: remove intr coalesce update from napi") Signed-off-by:
Brett Creeley <brett.creeley@amd.com> Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231204192234.21017-3-shannon.nelson@amd.comSigned-off-by:
-
Shannon Nelson authored
Our friendly kernel test robot has reminded us that with a new check we have a warning about a potential string truncation. In this case it really doesn't hurt anything, but it is worth addressing especially since there really is no reason to reserve so many bytes for our queue names. It seems that cutting the queue name buffer length in half stops the complaint. Fixes: c06107ca ("ionic: more ionic name tweaks") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311300201.lO8v7mKU-lkp@intel.com/Signed-off-by:
-
Paolo Abeni authored
After the blamed commit below, if the user-space application performs window clamping when tp->rcv_wnd is 0, the TCP socket will never be able to announce a non 0 receive window, even after completely emptying the receive buffer and re-setting the window clamp to higher values. Refactor tcp_set_window_clamp() to address the issue: when the user decreases the current clamp value, set rcv_ssthresh according to the same logic used at buffer initialization, but ensuring reserved mem provisioning. To avoid code duplication factor-out the relevant bits from tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above scenario. When increasing the clamp value, give the rcv_ssthresh a chance to grow according to previously implemented heuristic. Fixes: 3aa7857f ("tcp: enable mid stream window clamp") Reported-by:
David Gibson <david@gibson.dropbear.id.au> Reported-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Dinghao Liu authored
When flow_indr_dev_register() fails, bnxt_init_tc will free bp->tc_info through kfree(). However, the caller function bnxt_init_one() will ignore this failure and call bnxt_shutdown_tc() on failure of bnxt_dl_register(), where a use-after-free happens. Fix this issue by setting bp->tc_info to NULL after kfree(). Fixes: 627c89d0 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Link: https://lore.kernel.org/r/20231204024004.8245-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
Lorenzo Bianconi authored
Based on the previous allocated packet, page_offset can be not null in veth_convert_skb_to_xdp_buff routine. Take into account page fragment offset during the skb paged area copy in veth_convert_skb_to_xdp_buff(). Fixes: 2d0de67d ("net: veth: use newly added page pool API for veth with xdp") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by:
Yunsheng Lin <linyunsheng@huawei.com> Link: https://lore.kernel.org/r/eddfe549e7e626870071930964ac3c38a1dc8068.1701702000.git.lorenzo@kernel.orgSigned-off-by:
-
- 05 Dec, 2023 4 commits
-
-
Zhipeng Lu authored
The rvu_dl will be freed in rvu_npa_health_reporters_destroy(rvu_dl) after the create_workqueue fails, and after that free, the rvu_dl will be translate back through rvu_npa_health_reporters_create, rvu_health_reporters_create, and rvu_register_dl. Finally it goes to the err_dl_health label, being freed again in rvu_health_reporters_destroy(rvu) by rvu_npa_health_reporters_destroy. In the second calls of rvu_npa_health_reporters_destroy, however, it uses rvu_dl->rvu_npa_health_reporter, which is already freed at the end of rvu_npa_health_reporters_destroy in the first call. So this patch prevents the first destroy by instantly returning -ENONMEN when create_workqueue fails. In addition, since the failure of create_workqueue is the only entrence of label err, it has been integrated into the error-handling path of create_workqueue. Fixes: f1168d1e ("octeontx2-af: Add devlink health reporters for NPA") Signed-off-by:
Zhipeng Lu <alexious@zju.edu.cn> Acked-by:
-
Jianheng Zhang authored
The status bits of register MAC_FPE_CTRL_STS are clear on read. Using 32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt handler missing FPE event status and leads to FPE handshaking failure and retries. To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to cache the control bits of MAC_FPE_CTRL_STS and to avoid reading MAC_FPE_CTRL_STS in those methods. Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure") Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
Jianheng Zhang <Jianheng.Zhang@synopsys.com> Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.comSigned-off-by:
-
Naveen Mamindlapalli authored
The current adaptive interrupt coalescing code updates only rx packet stats for dim algorithm. This patch also updates tx packet stats which will be useful when there is only tx traffic. Also moved configuring hardware adaptive interrupt setting to driver dim callback. Fixes: 6e144b47 ("octeontx2-pf: Add support for adaptive interrupt coalescing") Signed-off-by:
Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by:
-
Thomas Reichinger authored
Probe of Sohard Arcnet cards fails, if 2 or more cards are installed in a system. See kernel log: [ 2.759203] arcnet: arcnet loaded [ 2.763648] arcnet:com20020: COM20020 chipset support (by David Woodhouse et al.) [ 2.770585] arcnet:com20020_pci: COM20020 PCI support [ 2.772295] com20020 0000:02:00.0: enabling device (0000 -> 0003) [ 2.772354] (unnamed net_device) (uninitialized): PLX-PCI Controls ... [ 3.071301] com20020 0000:02:00.0 arc0-0 (uninitialized): PCI COM20020: station FFh found at F080h, IRQ 101. [ 3.071305] com20020 0000:02:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s [ 3.071534] com20020 0000:07:00.0: enabling device (0000 -> 0003) [ 3.071581] (unnamed net_device) (uninitialized): PLX-PCI Controls ... [ 3.369501] com20020 0000:07:00.0: Led pci:green:tx:0-0 renamed to pci:green:tx:0-0_1 due to name collision [ 3.369535] com20020 0000:07:00.0: Led pci:red:recon:0-0 renamed to pci:red:recon:0-0_1 due to name collision [ 3.370586] com20020 0000:07:00.0 arc0-0 (uninitialized): PCI COM20020: station E1h found at C000h, IRQ 35. [ 3.370589] com20020 0000:07:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s [ 3.370608] com20020: probe of 0000:07:00.0 failed with error -5 commit 5ef216c1 ("arcnet: com20020-pci: add rotary index support") changes the device name of all COM20020 based PCI cards, even if only some cards support this: snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); The error happens because all Sohard Arcnet cards would be called arc0-0, since the Sohard Arcnet cards don't have a PLX rotary coder. I.e. EAE Arcnet cards have a PLX rotary coder, which sets the first decimal, ensuring unique devices names. This patch adds two new card feature flags to indicate which cards support LEDs and the PLX rotary coder. For EAE based cards the names still depend on the PLX rotary coder (untested, since missing EAE hardware). For Sohard based cards, this patch will result in devices being called arc0, arc1, ... (tested). Signed-off-by:
Thomas Reichinger <thomas.reichinger@sohard.de> Fixes: 5ef216c1 ("arcnet: com20020-pci: add rotary index support") Link: https://lore.kernel.org/r/20231130113503.6812-1-thomas.reichinger@sohard.deSigned-off-by:
-
- 04 Dec, 2023 6 commits
-
-
Daniel Borkmann authored
In some potential instances the reference count on struct packet_sock could be saturated and cause overflows which gets the kernel a bit confused. To prevent this, move to a 64-bit atomic reference count on 64-bit architectures to prevent the possibility of this type to overflow. Because we can not handle saturation, using refcount_t is not possible in this place. Maybe someday in the future if it changes it could be used. Also, instead of using plain atomic64_t, use atomic_long_t instead. 32-bit machines tend to be memory-limited (i.e. anything that increases a reference uses so much memory that you can't actually get to 2**32 references). 32-bit architectures also tend to have serious problems with 64-bit atomics. Hence, atomic_long_t is the more natural solution. Reported-by:
"The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk> Co-developed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@kernel.org Reviewed-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
-
Douglas Anderson authored
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8153_aldps_en(). Fixes: 4214cc55 ("r8152: check if disabling ALDPS is finished") Reviewed-by:
Grant Grundler <grundler@chromium.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Douglas Anderson authored
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8153_pre_firmware_1(). Fixes: 9370f2d0 ("r8152: support request_firmware for RTL8153") Reviewed-by:
-
Douglas Anderson authored
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8156b_wait_loading_flash(). Fixes: 195aae32 ("r8152: support new chips") Reviewed-by:
-
Douglas Anderson authored
Previous commits added checks for RTL8152_INACCESSIBLE in the loops in the driver. There are still a few more that keep tripping the driver up in error cases and make things take longer than they should. Add those in. All the loops that are part of this commit existed in some form or another since the r8152 driver was first introduced, though RTL8152_INACCESSIBLE was known as RTL8152_UNPLUG before commit 715f67f3 ("r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE") Fixes: ac718b69 ("net/usb: new driver for RTL8152") Reviewed-by:
-
Douglas Anderson authored
As of commit d9962b0d ("r8152: Block future register access if register access fails") there is a race condition that can happen between the USB device reset thread and napi_enable() (not) getting called during rtl8152_open(). Specifically: * While rtl8152_open() is running we get a register access error that's _not_ -ENODEV and queue up a USB reset. * rtl8152_open() exits before calling napi_enable() due to any reason (including usb_submit_urb() returning an error). In that case: * Since the USB reset is perform in a separate thread asynchronously, it can run at anytime USB device lock is not held - even before rtl8152_open() has exited with an error and caused __dev_open() to clear the __LINK_STATE_START bit. * The rtl8152_pre_reset() will notice that the netif_running() returns true (since __LINK_STATE_START wasn't cleared) so it won't exit early. * rtl8152_pre_reset() will then hang in napi_disable() because napi_enable() was never called. We can fix the race by making sure that the r8152 reset routines don't run at the same time as we're opening the device. Specifically we need the reset routines in their entirety rely on the return value of netif_running(). The only way to reliably depend on that is for them to hold the rntl_lock() mutex for the duration of reset. Grabbing the rntl_lock() mutex for the duration of reset seems like a long time, but reset is not expected to be common and the rtnl_lock() mutex is already held for long durations since the core grabs it around the open/close calls. Fixes: d9962b0d ("r8152: Block future register access if register access fails") Reviewed-by:
-
- 02 Dec, 2023 3 commits
-
-
ChunHao Lin authored
When FIFO reaches near full state, device will issue pause frame. If pause slot is enabled(set to 1), in this time, device will issue pause frame only once. But if pause slot is disabled(set to 0), device will keep sending pause frames until FIFO reaches near empty state. When pause slot is disabled, if there is no one to handle receive packets, device FIFO will reach near full state and keep sending pause frames. That will impact entire local area network. This issue can be reproduced in Chromebox (not Chromebook) in developer mode running a test image (and v5.10 kernel): 1) ping -f $CHROMEBOX (from workstation on same local network) 2) run "powerd_dbus_suspend" from command line on the $CHROMEBOX 3) ping $ROUTER (wait until ping fails from workstation) Takes about ~20-30 seconds after step 2 for the local network to stop working. Fix this issue by enabling pause slot to only send pause frame once when FIFO reaches near full state. Fixes: f1bce4ad ("r8169: add support for RTL8125") Reported-by:
ChunHao Lin <hau@realtek.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20231129155350.5843-1-hau@realtek.comSigned-off-by:
-
Randy Dunlap authored
rndis_filter uses utf8s_to_utf16s() which is provided by setting NLS, so select NLS to fix the build error: ERROR: modpost: "utf8s_to_utf16s" [drivers/net/hyperv/hv_netvsc.ko] undefined! Fixes: 1ce09e89 ("hyperv: Add support for setting MAC from within guests") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Reviewed-by:
Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20231130055853.19069-1-rdunlap@infradead.orgSigned-off-by:
-
Thinh Tran authored
When an EEH error is encountered by a PCI adapter, the EEH driver modifies the PCI channel's state as shown below: enum { /* I/O channel is in normal state */ pci_channel_io_normal = (__force pci_channel_state_t) 1, /* I/O to channel is blocked */ pci_channel_io_frozen = (__force pci_channel_state_t) 2, /* PCI card is dead */ pci_channel_io_perm_failure = (__force pci_channel_state_t) 3, }; If the same EEH error then causes the tg3 driver's transmit timeout logic to execute, the tg3_tx_timeout() function schedules a reset task via tg3_reset_task_schedule(), which may cause a race condition between the tg3 and EEH driver as both attempt to recover the HW via a reset action. EEH driver gets error event --> eeh_set_channel_state() and set device to one of error state above scheduler: tg3_reset_task() get returned error from tg3_init_hw() --> dev_close() shuts down the interface tg3_io_slot_reset() and tg3_io_resume() fail to reset/resume the device To resolve this issue, we avoid the race condition by checking the PCI channel state in the tg3_reset_task() function and skip the tg3 driver initiated reset when the PCI channel is not in the normal state. (The driver has no access to tg3 device registers at this point and cannot even complete the reset task successfully without external assistance.) We'll leave the reset procedure to be managed by the EEH driver which calls the tg3_io_error_detected(), tg3_io_slot_reset() and tg3_io_resume() functions as appropriate. Adding the same checking in tg3_dump_state() to avoid dumping all device registers when the PCI channel is not in the normal state. Signed-off-by:Thinh Tran <thinhtr@linux.vnet.ibm.com> Tested-by:
Venkata Sai Duggi <venkata.sai.duggi@ibm.com> Reviewed-by:
David Christensen <drc@linux.vnet.ibm.com> Reviewed-by:
-
- 01 Dec, 2023 3 commits
-
-
Subbaraya Sundeep authored
If a NIXLF is not attached to a PF/VF device then nix_get_nixlf function fails and returns proper error code. But npc_get_default_entry_action does not check it and uses garbage value in subsequent calls. Fix this by cheking the return value of nix_get_nixlf. Fixes: 967db352 ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
-
Subbaraya Sundeep authored
All the mailbox messages sent to AF needs to be guarded by mutex lock. Add the missing lock in otx2_get_pauseparam function. Fixes: 75f36270 ("octeontx2-pf: Support to enable/disable pause frames via ethtool") Signed-off-by:
-
Jakub Kicinski authored
We don't have much to say about 9p, even tho it lives under net/. Avoid CCing netdev. Signed-off-by:
-
