- 28 Aug, 2020 1 commit
-
-
Alan Stern authored
The PSZ-HA* family of USB disk drives from Sony can't handle the REPORT OPCODES command when using the UAS protocol. This patch adds an appropriate quirks entry. Reported-and-tested-by: Till Dörges <doerges@pre-sense.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826143229.GB400430@rowland.harvard.eduSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 27 Aug, 2020 4 commits
-
-
Cyril Roelandt authored
This device does not support UAS properly and a similar entry already exists in drivers/usb/storage/unusual_uas.h. Without this patch, storage_probe() defers the handling of this device to UAS, which cannot handle it either. Tested-by: Brice Goglin <brice.goglin@gmail.com> Fixes: bc3bdb12 ("usb-storage: Disable UAS on JMicron SATA enclosure") Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Link: https://lore.kernel.org/r/20200825212231.46309-1-tipecaml@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tang Bin authored
If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ohci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 62194244 ("USB: Add Samsung Exynos OHCI diver") Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Shevchenko authored
Inadvertently the commit b1cd1b65 ("USB: gadget: u_f: add overflow checks to VLA macros") makes VLA macros to always return 0 due to different scope of two variables of the same name. Obviously we need to have only one. Fixes: b1cd1b65 ("USB: gadget: u_f: add overflow checks to VLA macros") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Brooke Basile <brookebasile@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20200826192119.56450-1-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
The Sound Devices MixPre-D audio card suffers from the same defect as the Sound Devices USBPre2: an endpoint shared between a normal audio interface and a vendor-specific interface, in violation of the USB spec. Since the USB core now treats duplicated endpoints as bugs and ignores them, the audio endpoint isn't available and the card can't be used for audio capture. Along the same lines as commit bdd1b147 ("USB: quirks: blacklist duplicate ep on Sound Devices USBPre2"), this patch adds a quirks entry saying to ignore ep5in for interface 1, leaving it available for use with standard audio interface 2. Reported-and-tested-by: Jean-Christophe Barnoud <jcbarnoud@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Fixes: 3e4f8e21 ("USB: core: fix check for duplicate endpoints") Link: https://lore.kernel.org/r/20200826194624.GA412633@rowland.harvard.eduSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 Aug, 2020 4 commits
-
-
Badhri Jagan Sridharan authored
The patch addresses the compliance test failures while running TDA 2.3.1.1 and TDA 2.3.1.2 of the "PD Communications Engine USB PD Compliance MOI" test plan published in https://www.usb.org/usbc. For a product to be Type-C compliant, it's expected that these tests are run on usb.org certified Type-C compliance tester as mentioned in https://www.usb.org/usbc. While the purpose of TDA 2.3.1.1 and TDA 2.3.1.2 is to verify that the static and dynamic electrical capabilities of a Source meet the requirements for each PDO offered, while doing so, the tests also monitor that the timing of the VBUS waveform versus the messages meets the requirements for Hard Reset defined in PROT-PROC-HR-TSTR as mentioned in step 11 of TDA.2.3.1.1 and step 15 of TDA.2.3.1.2. TDB.2.2.13.1: PROT-PROC-HR-TSTR Procedure and Checks for Tester Originated Hard Reset Purpose: To perform the appropriate protocol checks relating to any circumstance in which the Hard Reset signal is sent by the Tester. UUT is behaving as source: The Tester sends a Hard Reset signal. 1. Check VBUS stays within present valid voltage range for tPSHardReset min (25ms) after last bit of Hard Reset signal. [PROT_PROC_HR_TSTR_1] 2. Check that VBUS starts to fall below present valid voltage range by tPSHardReset max (35ms). [PROT_PROC_HR_TSTR_2] 3. Check that VBUS reaches vSafe0V within tSafe0v max (650 ms). [PROT_PROC_HR_TSTR_3] 4. Check that VBUS starts rising to vSafe5V after a delay of tSrcRecover (0.66s - 1s) from reaching vSafe0V. [PROT_PROC_HR_TSTR_4] 5. Check that VBUS reaches vSafe5V within tSrcTurnOn max (275ms) of rising above vSafe0v max (0.8V). [PROT_PROC_HR_TSTR_5] Power Delivery Compliance Plan 139 6. Check that Source Capabilities are finished sending within tFirstSourceCap max (250ms) of VBUS reaching vSafe5v min. [PROT_PROC_HR_TSTR_6]. This is in line with 7.1.5 Response to Hard Resets of the USB Power Delivery Specification Revision 3.0, Version 1.2, "Hard Reset Signaling indicates a communication failure has occurred and the Source Shall stop driving VCONN, Shall remove Rp from the VCONN pin and Shall drive VBUS to vSafe0V as shown in Figure 7-9. The USB connection May reset during a Hard Reset since the VBUS voltage will be less than vSafe5V for an extended period of time. After establishing the vSafe0V voltage condition on VBUS, the Source Shall wait tSrcRecover before re-applying VCONN and restoring VBUS to vSafe5V. A Source Shall conform to the VCONN timing as specified in [USB Type-C 1.3]." With the above guidelines from the spec in mind, TCPM does not turn off VCONN while entering SRC_HARD_RESET_VBUS_OFF. The patch makes TCPM turn off VCONN while entering SRC_HARD_RESET_VBUS_OFF and turn it back on while entering SRC_HARD_RESET_VBUS_ON along with vbus instead of having VCONN on through hardreset. Also, the spec clearly states that "After establishing the vSafe0V voltage condition on VBUS", the Source Shall wait tSrcRecover before re-applying VCONN and restoring VBUS to vSafe5V. TCPM does not conform to this requirement. If the TCPC driver calls tcpm_vbus_change with vbus off signal, TCPM right away enters SRC_HARD_RESET_VBUS_ON without waiting for tSrcRecover. For TCPC's which are buggy/does not call tcpm_vbus_change, TCPM assumes that the vsafe0v is instantaneous as TCPM only waits tSrcRecover instead of waiting for tSafe0v + tSrcRecover. This patch also fixes this behavior by making sure that TCPM waits for tSrcRecover before transitioning into SRC_HARD_RESET_VBUS_ON when tcpm_vbus_change is called by TCPC. When TCPC does not call tcpm_vbus_change, TCPM assumes the worst case i.e. tSafe0v + tSrcRecover before transitioning into SRC_HARD_RESET_VBUS_ON. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20200817184601.1899929-1-badhri@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
周琰杰 (Zhou Yanjie) authored
The commit 2a6c0b82 ("USB: PHY: JZ4770: Add support for new Ingenic SoCs.") introduced the initialization function for different chips, but left the relevant code involved in the resetting process in the original function, resulting in uninitialized variable calls. Fixes: 2a6c0b82 ("USB: PHY: JZ4770: Add support for new Ingenic SoCs."). Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/20200825081654.18186-2-zhouyanjie@wanyeetech.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brooke Basile authored
Some values extracted by ncm_unwrap_ntb() could possibly lead to several different out of bounds reads of memory. Specifically the values passed to netdev_alloc_skb_ip_align() need to be checked so that memory is not overflowed. Resolve this by applying bounds checking to a number of different indexes and lengths of the structure parsing logic. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Brooke Basile <brookebasile@gmail.com> Acked-by: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brooke Basile authored
size can potentially hold an overflowed value if its assigned expression is left unchecked, leading to a smaller than needed allocation when vla_group_size() is used by callers to allocate memory. To fix this, add a test for saturation before declaring variables and an overflow check to (n) * sizeof(type). If the expression results in overflow, vla_group_size() will return SIZE_MAX. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Brooke Basile <brookebasile@gmail.com> Acked-by: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 Aug, 2020 3 commits
-
-
Ding Hui authored
Some device drivers call libusb_clear_halt when target ep queue is not empty. (eg. spice client connected to qemu for usb redir) Before commit f5249461 ("xhci: Clear the host side toggle manually when endpoint is soft reset"), that works well. But now, we got the error log: EP not empty, refuse reset xhci_endpoint_reset failed and left ep_state's EP_SOFT_CLEAR_TOGGLE bit still set So all the subsequent urb sumbits to the ep will fail with the warn log: Can't enqueue URB while manually clearing toggle We need to clear ep_state EP_SOFT_CLEAR_TOGGLE bit after xhci_endpoint_reset, even if it failed. Fixes: f5249461 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable <stable@vger.kernel.org> # v4.17+ Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200821091549.20556-4-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kai-Heng Feng authored
Sometimes re-plugging a USB device during system sleep renders the device useless: [ 173.418345] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x14203e2, return 0x10262 ... [ 176.496485] usb 2-4: Waited 2000ms for CONNECT [ 176.496781] usb usb2-port4: status 0000.0262 after resume, -19 [ 176.497103] usb 2-4: can't resume, status -19 [ 176.497438] usb usb2-port4: logical disconnect Because PLS equals to XDEV_RESUME, xHCI driver reports U3 to usbcore, despite of CAS bit is flagged. So proritize CAS over XDEV_RESUME to let usbcore handle warm-reset for the port. Cc: stable <stable@vger.kernel.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200821091549.20556-3-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Li Jun authored
dci is 0 based and xhci_get_ep_ctx() will do ep index increment to get the ep context. [rename dci to ep_index -Mathias] Cc: stable <stable@vger.kernel.org> # v4.15+ Fixes: 02b6fdc2 ("usb: xhci: Add debugfs interface for xHCI driver") Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200821091549.20556-2-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 19 Aug, 2020 3 commits
-
-
Thinh Nguyen authored
PNY Pro Elite USB 3.1 Gen 2 device (SSD) doesn't respond to ATA_12 pass-through command (i.e. it just hangs). If it doesn't support this command, it should respond properly to the host. Let's just add a quirk to be able to move forward with other operations. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Link: https://lore.kernel.org/r/2b0585228b003eedcc82db84697b31477df152e0.1597803605.git.thinhn@synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heikki Krogerus authored
Converting the Makefile to use the new tools buildsystem. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> [fixes builds with O=...] Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200819071733.60028-1-heikki.krogerus@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'fixes-for-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.9-rc Three ZLP fixes on dwc3 and a resource leak fix on the TCM gadget Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'fixes-for-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: dwc3: gadget: Handle ZLP for sg requests usb: dwc3: gadget: Fix handling ZLP usb: dwc3: gadget: Don't setup more than requested usb: gadget: f_tcm: Fix some resource leaks in some error paths
-
- 18 Aug, 2020 15 commits
-
-
Bastien Nocera authored
When a new device with a specialised device driver is plugged in, the new driver will be modprobe()'d but the driver core will attach the "generic" driver to the device. After that, nothing will trigger a reprobe when the modprobe()'d device driver has finished initialising, as the device has the "generic" driver attached to it. Trigger a reprobe ourselves when new specialised drivers get registered. Fixes: 88b7381a ("USB: Select better matching USB drivers when available") Signed-off-by: Bastien Nocera <hadess@hadess.net> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200818110445.509668-3-hadess@hadess.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bastien Nocera authored
We only ever used the ID table matching before, but we should also support open-coded match functions. Fixes: 88b7381a ("USB: Select better matching USB drivers when available") Signed-off-by: Bastien Nocera <hadess@hadess.net> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200818110445.509668-1-hadess@hadess.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
JC Kuo authored
tegra_xusb_get_phy() should take input argument "name". Signed-off-by: JC Kuo <jckuo@nvidia.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200811092553.657762-1-jckuo@nvidia.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
JC Kuo authored
tegra_xusb_init_usb_phy() should initialize "otg_usb2_port" and "otg_usb3_port" with -EINVAL because "0" is a valid value represents usb2 port 0 or usb3 port 0. Signed-off-by: JC Kuo <jckuo@nvidia.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200811093143.699541-1-jckuo@nvidia.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Shevchenko authored
On the removal stage we put a reference to the controller structure and if it's not used anymore it gets freed, but later we try to dereference a pointer to a member of that structure. Copy necessary field to a temporary variable to avoid use after free. Fixes: 306c54d0 ("usb: hcd: Try MSI interrupts on PCI devices") Reported-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/linux-usb/30a8c4ca-64c2-863b-cfcd-0970599c0ba3@huawei.com/Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200814182218.71957-1-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
Commit 081da132 ("usb: typec: ucsi: displayport: Fix a potential race during registration") made the ucsi code hold con->lock in ucsi_register_displayport(). But we really don't want any interactions with the connector to run before the port-registration process is fully complete. This commit moves the taking of con->lock from ucsi_register_displayport() into ucsi_register_port() to achieve this. Cc: stable@vger.kernel.org Fixes: 081da132 ("usb: typec: ucsi: displayport: Fix a potential race during registration") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200809141904.4317-5-hdegoede@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
The ppm_lock really only needs to be hold during 2 functions: ucsi_reset_ppm() and ucsi_run_command(). Push the taking of the lock down into these 2 functions, renaming ucsi_run_command() to ucsi_send_command() which was an existing wrapper already taking the lock for its callers. This simplifies things for the callers and removes the difference between ucsi_send_command() and ucsi_run_command() which has led to various locking bugs in the past. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200809141904.4317-4-hdegoede@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
Fix 2 unlocked ucsi_run_command calls: 1. ucsi_handle_connector_change() contains one ucsi_send_command() call, which takes the ppm_lock for it; and one ucsi_run_command() call which relies on the caller have taking the ppm_lock. ucsi_handle_connector_change() does not take the lock, so the second (ucsi_run_command) calls should also be ucsi_send_command(). 2. ucsi_get_pdos() gets called from ucsi_handle_connector_change() which does not hold the ppm_lock, so it also must use ucsi_send_command(). This commit also adds a WARN_ON(!mutex_is_locked(&ucsi->ppm_lock)); to ucsi_run_command() to avoid similar problems getting re-introduced in the future. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200809141904.4317-3-hdegoede@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
Lockdep reports an AB BA lock inversion between ucsi_init() and ucsi_handle_connector_change(): AB order: 1. ucsi_init takes ucsi->ppm_lock (it runs with that locked for the duration of the function) 2. usci_init eventually end up calling ucsi_register_displayport, which takes ucsi_connector->lock BA order: 1. ucsi_handle_connector_change work is started, takes ucsi_connector->lock 2. ucsi_handle_connector_change calls ucsi_send_command which takes ucsi->ppm_lock The ppm_lock really only needs to be hold during 2 functions: ucsi_reset_ppm() and ucsi_run_command(). This commit fixes the AB BA lock inversion by making ucsi_init drop the ucsi->ppm_lock before it starts registering ports; and replacing any ucsi_run_command() calls after this point with ucsi_send_command() (which is a wrapper around run_command taking the lock while handling the command). Some of the replacing of ucsi_run_command with ucsi_send_command in the helpers used during port registration also fixes a number of code paths after registration which call ucsi_run_command() without holding the ppm_lock: 1. ucsi_altmode_update_active() call in ucsi/displayport.c 2. ucsi_register_altmodes() call from ucsi_handle_connector_change() (through ucsi_partner_change()) Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200809141904.4317-2-hdegoede@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
M. Vefa Bicakci authored
Commit 88b7381a ("USB: Select better matching USB drivers when available") introduced the use of a "match" function to select a non-generic/better driver for a particular USB device. This unfortunately breaks the operation of usbip in general, as reported in the kernel bugzilla with bug 208267 (linked below). Upon inspecting the aforementioned commit, one can observe that the original code in the usb_device_match function used to return 1 unconditionally, but the aforementioned commit makes the usb_device_match function use identifier tables and "match" virtual functions, if either of them are available. Hence, this commit implements a match function for usbip that unconditionally returns true to ensure that usbip is functional again. This change has been verified to restore usbip functionality, with a v5.7.y kernel on an up-to-date version of Qubes OS 4.0, which uses usbip to redirect USB devices between VMs. Thanks to Jonathan Dieter for the effort in bisecting this issue down to the aforementioned commit. Fixes: 88b7381a ("USB: Select better matching USB drivers when available") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208267 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1856443 Link: https://github.com/QubesOS/qubes-issues/issues/5905Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Cc: <stable@vger.kernel.org> # 5.7 Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Bastien Nocera <hadess@hadess.net> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20200810160017.46002-1-m.v.b@runbox.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vinod Koul authored
Some devices in wild are reporting bunch of firmware versions, so remove the check for versions in driver Reported by: Anastasios Vacharakis <vacharakis@gmail.com> Reported by: Glen Journeay <journeay@gmail.com> Fixes: 2478be82 ("usb: renesas-xhci: Add ROM loader for uPD720201") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208911Signed-off-by: Vinod Koul <vkoul@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200818071739.789720-1-vkoul@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Evgeny Novikov authored
lvs_rh_probe() can return some nonnegative value from usb_control_msg() when it is less than "USB_DT_HUB_NONVAR_SIZE + 2" that is considered as a failure. Make lvs_rh_probe() return -EINVAL in this case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200805090643.3432-1-novikov@ispras.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tom Rix authored
Clang static analysis reports this error cdc-acm.c:409:3: warning: Use of memory after it is freed acm_process_notification(acm, (unsigned char *)dr); There are three problems, the first one is that dr is not reset The variable dr is set with if (acm->nb_index) dr = (struct usb_cdc_notification *)acm->notification_buffer; But if the notification_buffer is too small it is resized with if (acm->nb_size) { kfree(acm->notification_buffer); acm->nb_size = 0; } alloc_size = roundup_pow_of_two(expected_size); /* * kmalloc ensures a valid notification_buffer after a * use of kfree in case the previous allocation was too * small. Final freeing is done on disconnect. */ acm->notification_buffer = kmalloc(alloc_size, GFP_ATOMIC); dr should point to the new acm->notification_buffer. The second problem is any data in the notification_buffer is lost when the pointer is freed. In the normal case, the current data is accumulated in the notification_buffer here. memcpy(&acm->notification_buffer[acm->nb_index], urb->transfer_buffer, copy_size); When a resize happens, anything before notification_buffer[acm->nb_index] is garbage. The third problem is the acm->nb_index is not reset on a resizing buffer error. So switch resizing to using krealloc and reassign dr and reset nb_index. Fixes: ea258352 ("cdc-acm: reassemble fragmented notifications") Signed-off-by: Tom Rix <trix@redhat.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20200801152154.20683-1-trix@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kai-Heng Feng authored
There's another Raydium touchscreen needs the no-lpm quirk: [ 1.339149] usb 1-9: New USB device found, idVendor=2386, idProduct=350e, bcdDevice= 0.00 [ 1.339150] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.339151] usb 1-9: Product: Raydium Touch System [ 1.339152] usb 1-9: Manufacturer: Raydium Corporation ... [ 6.450497] usb 1-9: can't set config #1, error -110 BugLink: https://bugs.launchpad.net/bugs/1889446Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200731051622.28643-1-kai.heng.feng@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
The syzbot fuzzer identified a bug in the yurex driver: It passes GFP_KERNEL as a memory-allocation flag to usb_submit_urb() at a time when its state is TASK_INTERRUPTIBLE, not TASK_RUNNING: do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000370c7c68>] prepare_to_wait+0xb1/0x2a0 kernel/sched/wait.c:247 WARNING: CPU: 1 PID: 340 at kernel/sched/core.c:7253 __might_sleep+0x135/0x190 kernel/sched/core.c:7253 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 340 Comm: syz-executor677 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 panic+0x2aa/0x6e1 kernel/panic.c:231 __warn.cold+0x20/0x50 kernel/panic.c:600 report_bug+0x1bd/0x210 lib/bug.c:198 handle_bug+0x41/0x80 arch/x86/kernel/traps.c:234 exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254 asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536 RIP: 0010:__might_sleep+0x135/0x190 kernel/sched/core.c:7253 Code: 65 48 8b 1c 25 40 ef 01 00 48 8d 7b 10 48 89 fe 48 c1 ee 03 80 3c 06 00 75 2b 48 8b 73 10 48 c7 c7 e0 9e 06 86 e8 ed 12 f6 ff <0f> 0b e9 46 ff ff ff e8 1f b2 4b 00 e9 29 ff ff ff e8 15 b2 4b 00 RSP: 0018:ffff8881cdb77a28 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881c6458000 RCX: 0000000000000000 RDX: ffff8881c6458000 RSI: ffffffff8129ec93 RDI: ffffed1039b6ef37 RBP: ffffffff86fdade2 R08: 0000000000000001 R09: ffff8881db32f54f R10: 0000000000000000 R11: 0000000030343354 R12: 00000000000001f2 R13: 0000000000000000 R14: 0000000000000068 R15: ffffffff83c1b1aa slab_pre_alloc_hook.constprop.0+0xea/0x200 mm/slab.h:498 slab_alloc_node mm/slub.c:2816 [inline] slab_alloc mm/slub.c:2900 [inline] kmem_cache_alloc_trace+0x46/0x220 mm/slub.c:2917 kmalloc include/linux/slab.h:554 [inline] dummy_urb_enqueue+0x7a/0x880 drivers/usb/gadget/udc/dummy_hcd.c:1251 usb_hcd_submit_urb+0x2b2/0x22d0 drivers/usb/core/hcd.c:1547 usb_submit_urb+0xb4e/0x13e0 drivers/usb/core/urb.c:570 yurex_write+0x3ea/0x820 drivers/usb/misc/yurex.c:495 This patch changes the call to use GFP_ATOMIC instead of GFP_KERNEL. Reported-and-tested-by: syzbot+c2c3302f9c601a4b1be2@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200810182954.GB307778@rowland.harvard.eduSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 17 Aug, 2020 4 commits
-
-
Thinh Nguyen authored
Currently dwc3 doesn't handle usb_request->zero for SG requests. This change checks and prepares extra TRBs for the ZLP for SG requests. Cc: <stable@vger.kernel.org> # v4.5+ Fixes: 04c03d10 ("usb: dwc3: gadget: handle request->zero") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Thinh Nguyen authored
The usb_request->zero doesn't apply for isoc. Also, if we prepare a 0-length (ZLP) TRB for the OUT direction, we need to prepare an extra TRB to pad up to the MPS alignment. Use the same bounce buffer for the ZLP TRB and the extra pad TRB. Cc: <stable@vger.kernel.org> # v4.5+ Fixes: d6e5a549 ("usb: dwc3: simplify ZLP handling") Fixes: 04c03d10 ("usb: dwc3: gadget: handle request->zero") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Thinh Nguyen authored
The SG list may be set up with entry size more than the requested length. Check the usb_request->length and make sure that we don't setup the TRBs to send/receive more than requested. This case may occur when the SG entry is allocated up to a certain minimum size, but the request length is less than that. It can also occur when the request is reused for a different request length. Cc: <stable@vger.kernel.org> # v4.18+ Fixes: a31e63b6 ("usb: dwc3: gadget: Correct handling of scattergather lists") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Christophe JAILLET authored
If a memory allocation fails within a 'usb_ep_alloc_request()' call, the already allocated memory must be released. Fix a mix-up in the code and free the correct requests. Fixes: c52661d6 ("usb-gadget: Initial merge of target module for UASP + BOT") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
- 16 Aug, 2020 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Meelis Roos <mroos@linux.ee> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-