- 12 Mar, 2014 2 commits
-
-
Linus Lüssing authored
Without this check someone could easily create a denial of service by injecting multicast-specific queries to enable the bridge snooping part if no real querier issuing periodic general queries is present on the link which would result in the bridge wrongly shutting down ports for multicast traffic as the bridge did not learn about these listeners. With this patch the snooping code is enabled upon receiving valid, general queries only. Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
General IGMP and MLD queries are supposed to have the multicast link-local all-nodes address as their destination according to RFC2236 section 9, RFC3376 section 4.1.12/9.1, RFC2710 section 8 and RFC3810 section 5.1.15. Without this check, such malformed IGMP/MLD queries can result in a denial of service: The queries are ignored by most IGMP/MLD listeners therefore they will not respond with an IGMP/MLD report. However, without this patch these malformed MLD queries would enable the snooping part in the bridge code, potentially shutting down the according ports towards these hosts for multicast traffic as the bridge did not learn about these listeners. Reported-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
-
- 11 Mar, 2014 15 commits
-
-
Eric Dumazet authored
Lars Persson reported following deadlock : -000 |M:0x0:0x802B6AF8(asm) <-- arch_spin_lock -001 |tcp_v4_rcv(skb = 0x8BD527A0) <-- sk = 0x8BE6B2A0 -002 |ip_local_deliver_finish(skb = 0x8BD527A0) -003 |__netif_receive_skb_core(skb = 0x8BD527A0, ?) -004 |netif_receive_skb(skb = 0x8BD527A0) -005 |elk_poll(napi = 0x8C770500, budget = 64) -006 |net_rx_action(?) -007 |__do_softirq() -008 |do_softirq() -009 |local_bh_enable() -010 |tcp_rcv_established(sk = 0x8BE6B2A0, skb = 0x87D3A9E0, th = 0x814EBE14, ?) -011 |tcp_v4_do_rcv(sk = 0x8BE6B2A0, skb = 0x87D3A9E0) -012 |tcp_delack_timer_handler(sk = 0x8BE6B2A0) -013 |tcp_release_cb(sk = 0x8BE6B2A0) -014 |release_sock(sk = 0x8BE6B2A0) -015 |tcp_sendmsg(?, sk = 0x8BE6B2A0, ?, ?) -016 |sock_sendmsg(sock = 0x8518C4C0, msg = 0x87D8DAA8, size = 4096) -017 |kernel_sendmsg(?, ?, ?, ?, size = 4096) -018 |smb_send_kvec() -019 |smb_send_rqst(server = 0x87C4D400, rqst = 0x87D8DBA0) -020 |cifs_call_async() -021 |cifs_async_writev(wdata = 0x87FD6580) -022 |cifs_writepages(mapping = 0x852096E4, wbc = 0x87D8DC88) -023 |__writeback_single_inode(inode = 0x852095D0, wbc = 0x87D8DC88) -024 |writeback_sb_inodes(sb = 0x87D6D800, wb = 0x87E4A9C0, work = 0x87D8DD88) -025 |__writeback_inodes_wb(wb = 0x87E4A9C0, work = 0x87D8DD88) -026 |wb_writeback(wb = 0x87E4A9C0, work = 0x87D8DD88) -027 |wb_do_writeback(wb = 0x87E4A9C0, force_wait = 0) -028 |bdi_writeback_workfn(work = 0x87E4A9CC) -029 |process_one_work(worker = 0x8B045880, work = 0x87E4A9CC) -030 |worker_thread(__worker = 0x8B045880) -031 |kthread(_create = 0x87CADD90) -032 |ret_from_kernel_thread(asm) Bug occurs because __tcp_checksum_complete_user() enables BH, assuming it is running from softirq context. Lars trace involved a NIC without RX checksum support but other points are problematic as well, like the prequeue stuff. Problem is triggered by a timer, that found socket being owned by user. tcp_release_cb() should call tcp_write_timer_handler() or tcp_delack_timer_handler() in the appropriate context : BH disabled and socket lock held, but 'owned' field cleared, as if they were running from timer handlers. Fixes: 6f458dfb ("tcp: improve latencies of timer triggered events") Reported-by:
Lars Persson <lars.persson@axis.com> Tested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
Michael S. Tsirkin says: ==================== skbuff: fix skb_segment with zero copy skbs This fixes a bug in skb_segment where it moves frags between skbs without orphaning them. This causes userspace to assume it's safe to reuse the buffer, and receiver gets corrupted data. This further might leak information from the transmitter on the wire. To fix track which skb does a copied frag belong to, and orphan frags when copying them. As we are tracking multiple skbs here, using short names (skb,nskb,fskb,skb_frag,frag) becomes confusing. So before adding another one, I refactor these names slightly. Patch is split out to make it easier to verify that all trasformations are trivially correct. The problem was observed in the field, so I think that the patch is necessary on stable as well. ==================== Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Michael S. Tsirkin authored
skb_segment copies frags around, so we need to copy them carefully to avoid accessing user memory after reporting completion to userspace through a callback. skb_segment doesn't normally happen on datapath: TSO needs to be disabled - so disabling zero copy in this case does not look like a big deal. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
-
Michael S. Tsirkin authored
fskb is unrelated to frag: it's coming from frag_list. Rename it list_skb to avoid confusion. Signed-off-by:
-
Michael S. Tsirkin authored
rename local variable to make it easier to tell at a glance that we are dealing with a head skb. Signed-off-by:
-
Michael S. Tsirkin authored
skb_frag can in fact point at either skb or fskb so rename it generally "frag". Signed-off-by:
-
Michael S. Tsirkin authored
frag points at nskb, so name it appropriately Signed-off-by:
-
David S. Miller authored
Giuseppe Cavallaro says: ==================== stmmac fixes: EEE and chained mode These patches are to fix some new problems in the STMMAC driver. Mandatory changes are for EEE that needs to be disabled if not supported and for the chain mode that is broken and the kernel panics if this mode is enabled. v3: removed a patch from my previous set that touched the stmmac_tx path that has not to be applied. Other patches for cleaning-up will be sent on top of net-next git repo. v4: do not surround the defaul buffer selection using Koption and adopt a default to 1536bytes. ==================== Signed-off-by: -
Giuseppe CAVALLARO authored
This is to fix the compatibility to the STiD127 SoC. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by:
-
Giuseppe CAVALLARO authored
This patch is to fix the chain mode that was broken and generated a panic. This patch reviews the chain/ring modes now shaing the same structure and taking care about the pointers and callbacks. Signed-off-by:
-
Giuseppe CAVALLARO authored
This patch is to fix and tune the default buffer sizes. It reduces the default bufsize used by the driver from 4KiB to 1536 bytes. Patch has been tested on both ARM and SH4 platform based. Signed-off-by:
-
Giuseppe CAVALLARO authored
This patch is to disable the EEE (so HW and timers) for example when the phy communicates that the EEE can be supported anymore. Signed-off-by:
-
Neil Horman authored
vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by:Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> CC: stable@vger.kernel.org Reviewed-by:
Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by:
-
Peter Boström authored
With TX VLAN offload enabled the source MAC address for frames sent using the VLAN interface is currently set to the address of the real interface. This is wrong since the VLAN interface may be configured with a different address. The bug was introduced in commit 2205369a ("vlan: Fix header ops passthru when doing TX VLAN offload."). This patch sets the source address before calling the create function of the real interface. Signed-off-by:
Peter Boström <peter.bostrom@netrounds.com> Signed-off-by:
-
Annie Li authored
Current netback uses gso_type to check whether the skb contains gso offload, and this is wrong. Gso_size is the right one to check gso existence, and gso_type is only used to check gso type. Some skbs contains nonzero gso_type and zero gso_size, current netback would treat these skbs as gso and create wrong response for this. This also causes ssh failure to domu from other server. V2: use skb_is_gso function as Paul Durrant suggested Signed-off-by:
Annie Li <annie.li@oracle.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Reviewed-by:
Paul Durrant <paul.durrant@citrix.com> Signed-off-by:
-
- 10 Mar, 2014 4 commits
-
-
Eric Dumazet authored
Resizing fq hash table allocates memory while holding qdisc spinlock, with BH disabled. This is definitely not good, as allocation might sleep. We can drop the lock and get it when needed, we hold RTNL so no other changes can happen at the same time. Signed-off-by:
-
Ben Hutchings authored
udelay() does not work on some architectures for values above 2000, in particular on ARM: ERROR: "__bad_udelay" [drivers/net/ethernet/brocade/bna/bna.ko] undefined! Reported-by:
Vagrant Cascadian <vagrant@debian.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Eric Dumazet authored
The WARN_ON(root == &noop_qdisc)) added in qdisc_list_add() can trigger in normal conditions when devices are not up. It should be done only right before the list_add_tail() call. Fixes: e57a784d ("pkt_sched: set root qdisc before change() in attach_default_qdiscs()") Reported-by:
Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by:
Mirco Tischler <mt-ml@gmx.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== Please pull this batch of fixes intende for the 3.14 stream... For the mac80211 bits, Johannes says: "Here I have a fix from Eliad for the minimal channel width calculation in the mac80211 code which lead to monitor mode not working at all for drivers using that. One of my fixes is for an issue noticed by Michal, we clear an already cleared value but do it without locking, so just remove that. The other is for a data leak - we leak two bytes of kernel memory out over the air in QoS NULL frames because those don't get a sequence number assigned in the TX path." For the iwlwifi bits, Emmanuel says: "One more fix and an update for device IDs. There is a bugzilla reported for the fix which is mentioned in the commit message." Along with those... Amitkumar Karwar provides two mwifiex fixes, both correcting some data transcription problems. Ivaylo Dimitrov uses skb_trim in the wl1251 driver to avoid HAVE_EFFICIENT_UNALIGNED_ACCESS problems. ==================== Signed-off-by:
-
- 09 Mar, 2014 1 commit
-
-
Michael Chan authored
The pci shutdown handler added in: bnx2: Add pci shutdown handler commit 25bfb1dd created a shutdown down sequence without chip reset if the device was never brought up. This can cause the firmware to shutdown the PHY prematurely and cause MMIO read cycles to be unresponsive. On some systems, it may generate NMI in the bnx2's pci shutdown handler. The fix is to tell the firmware not to shutdown the PHY if there was no prior chip reset. Signed-off-by:Michael Chan <mchan@broadcom.com> Signed-off-by:
-
- 07 Mar, 2014 1 commit
-
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
- 06 Mar, 2014 17 commits
-
-
Sabrina Dubroca authored
DST_NOCOUNT should only be used if an authorized user adds routes locally. In case of routes which are added on behalf of router advertisments this flag must not get used as it allows an unlimited number of routes getting added remotely. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Amir Vadai authored
Currently, the PF call to pci_enable_sriov from the PF probe function stalls for 10 seconds times the number of VFs probed on the host. This happens because the way for such VFs to determine of the PF initialization finished, is by attempting to issue reset on the comm-channel and get timeout (after 10s). The PF probe function is called from a kenernel workqueue, and therefore during that time, rcu lock is being held and kernel's workqueue is stalled. This blocks other processes that try to use the workqueue or rcu lock. For example, interface renaming which is calling rcu_synchronize is blocked, and timedout by systemd. Changed mlx4_init_slave() to allow VF probed on the host to immediatly detect that the PF is not ready, and return EPROBE_DEFER instantly. Only when the PF finishes the initialization, allow such VFs to access the comm channel. This issue and fix are relevant only for probed VFs on the hypervisor, there is no way to pass this information to a VM until comm channel is ready, so in a VM, if PF is not ready, the first command will be timedout after 10 seconds and return EPROBE_DEFER. Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Amir Vadai authored
Fix a regression introduced by [1]. outbox was accessed instead of outbox->buf. Typo was copy-pasted to [2] and [3]. [1] - cc1ade94 mlx4_core: Disable memory windows for virtual functions [2] - 4de65803 mlx4_core: Add support for steerable IB UD QPs [3] - 7ffdf726 net/mlx4_core: Add basic support for TCP/IP offloads under tunneling Signed-off-by:
-
Sasha Levin authored
We didn't correctly check cases where the value for lp_interval is not within the legal range due to a missing table terminator. This would let userspace trigger a kernel panic by specifying a value out of range: echo -1 > /sys/devices/virtual/net/bond0/bonding/lp_interval Introduced by commit 4325b374 ("bonding: convert lp_interval to use the new option API"). Acked-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Anton Nayshtut authored
Without this fix, ipv6_exthdrs_offload_init doesn't register IPPROTO_DSTOPTS offload, but returns 0 (as the IPPROTO_ROUTING registration actually succeeds). This then causes the ipv6_gso_segment to drop IPv6 packets with IPPROTO_DSTOPTS header. The issue detected and the fix verified by running MS HCK Offload LSO test on top of QEMU Windows guests, as this test sends IPv6 packets with IPPROTO_DSTOPTS. Signed-off-by:
Anton Nayshtut <anton@swortex.com> Signed-off-by:
-
Anton Blanchard authored
The code to load a MAC address into a u64 for passing to the hypervisor via a register is broken on little endian. Create a helper function called ibmveth_encode_mac_addr which does the right thing in both big and little endian. We were storing the MAC address in a long in struct ibmveth_adapter. It's never used so remove it - we don't need another place in the driver where we create endian issues with MAC addresses. Signed-off-by:
Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Anton Blanchard authored
The unix socket code is using the result of csum_partial to hash into a lookup table: unix_hash_fold(csum_partial(sunaddr, len, 0)); csum_partial is only guaranteed to produce something that can be folded into a checksum, as its prototype explains: * returns a 32-bit number suitable for feeding into itself * or csum_tcpudp_magic The 32bit value should not be used directly. Depending on the alignment, the ppc64 csum_partial will return different 32bit partial checksums that will fold into the same 16bit checksum. This difference causes the following testcase (courtesy of Gustavo) to sometimes fail: #include <sys/socket.h> #include <stdio.h> int main() { int fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0); int i = 1; setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, 4); struct sockaddr addr; addr.sa_family = AF_LOCAL; bind(fd, &addr, 2); listen(fd, 128); struct sockaddr_storage ss; socklen_t sslen = (socklen_t)sizeof(ss); getsockname(fd, (struct sockaddr*)&ss, &sslen); fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0); if (connect(fd, (struct sockaddr*)&ss, sslen) == -1){ perror(NULL); return 1; } printf("OK\n"); return 0; } As suggested by davem, fix this by using csum_fold to fold the partial 32bit checksum into a 16bit checksum before using it. Signed-off-by: -
Andrew Lutomirski authored
The original documentation was very unclear. The code fix is presumably related to the formerly unclear documentation: SOCK_TIMESTAMPING_RX_SOFTWARE has no effect on __sock_recv_timestamp's behavior, so calling __sock_recv_ts_and_drops from sock_recv_ts_and_drops if only SOCK_TIMESTAMPING_RX_SOFTWARE is set is pointless. This should have no user-observable effect. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
With -Werror=array-bounds, gcc v4.7.x warns that in phy_find_valid(), the settings[] "array subscript is above array bounds", I think because idx is a signed integer and if the caller supplied idx < 0, we pass the guard but still reference out of bounds. Fix this by making idx unsigned here and elsewhere. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Westphal authored
Quoting Alexander Aring: While fragmentation and unloading of 6lowpan module I got this kernel Oops after few seconds: BUG: unable to handle kernel paging request at f88bbc30 [..] Modules linked in: ipv6 [last unloaded: 6lowpan] Call Trace: [<c012af4c>] ? call_timer_fn+0x54/0xb3 [<c012aef8>] ? process_timeout+0xa/0xa [<c012b66b>] run_timer_softirq+0x140/0x15f Problem is that incomplete frags are still around after unload; when their frag expire timer fires, we get crash. When a netns is removed (also done when unloading module), inet_frag calls the evictor with 'force' argument to purge remaining frags. The evictor loop terminates when accounted memory ('work') drops to 0 or the lru-list becomes empty. However, the mem accounting is done via percpu counters and may not be accurate, i.e. loop may terminate prematurely. Alter evictor to only stop once the lru list is empty when force is requested. Reported-by:Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Reported-by:
Alexander Aring <alex.aring@gmail.com> Tested-by:
Florian Westphal <fw@strlen.de> Acked-by:
-
David S. Miller authored
Eric Hugne says: ==================== tipc: refcount and memory leak fixes v3: Remove error logging from data path completely. Rebased on top of latest net merge. v2: Drop specific -ENOMEM logging in patch #1 (tipc: allow connection shutdown callback to be invoked in advance) And add a general error message if an internal server tries to send a message on a closed/nonexisting connection. In addition to the fix for refcount leak and memory leak during module removal, we also fix a problem where the topology server listening socket where unexpectedly closed. We also eliminate an unnecessary context switch during accept()/recvmsg() for nonblocking sockets. It might be good to include this patchset in stable aswell. After the v3 rebase on latest merge from net all patches apply cleanly on that tree. ==================== Signed-off-by: -
Erik Hugne authored
Failure to schedule a TIPC tasklet with tipc_k_signal because the tasklet handler is disabled is not an error. It means TIPC is currently in the process of shutting down. We remove the error logging in this case. Signed-off-by:
Erik Hugne <erik.hugne@ericsson.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Erik Hugne authored
When the TIPC module is removed, the tasklet handler is disabled before all other subsystems. This will cause lingering publications in the name table because the node_down tasklets responsible to clean up publications from an unreachable node will never run. When the name table is shut down, these publications are detected and an error message is logged: tipc: nametbl_stop(): orphaned hash chain detected This is actually a memory leak, introduced with commit 993b858e ("tipc: correct the order of stopping services at rmmod") Instead of just logging an error and leaking memory, we free the orphaned entries during nametable shutdown. Signed-off-by:
-
Erik Hugne authored
When a topology server subscriber is disconnected, the associated connection id is set to zero. A check vs zero is then done in the subscription timeout function to see if the subscriber have been shut down. This is unnecessary, because all subscription timers will be cancelled when a subscriber terminates. Setting the connection id to zero is actually harmful because id zero is the identity of the topology server listening socket, and can cause a race that leads to this socket being closed instead. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Reviewed-by:
-
Ying Xue authored
When messages are received via tipc socket under non-block mode, schedule_timeout() is called in tipc_wait_for_rcvmsg(), that is, the process of receiving messages will be scheduled once although timeout value passed to schedule_timeout() is 0. The same issue exists in accept()/wait_for_accept(). To avoid this unnecessary process switch, we only call schedule_timeout() if the timeout value is non-zero. Signed-off-by:
-
Ying Xue authored
When tipc_conn_sendmsg() calls tipc_conn_lookup() to query a connection instance, its reference count value is increased if it's found. But subsequently if it's found that the connection is closed, the work of sending message is not queued into its server send workqueue, and the connection reference count is not decreased. This will cause a reference count leak. To reproduce this problem, an application would need to open and closes topology server connections with high intensity. We fix this by immediately decrementing the connection reference count if a send fails due to the connection being closed. Signed-off-by:
-
Ying Xue authored
Currently connection shutdown callback function is called when connection instance is released in tipc_conn_kref_release(), and receiving packets and sending packets are running in different threads. Even if connection is closed by the thread of receiving packets, its shutdown callback may not be called immediately as the connection reference count is non-zero at that moment. So, although the connection is shut down by the thread of receiving packets, the thread of sending packets doesn't know it. Before its shutdown callback is invoked to tell the sending thread its connection has been closed, the sending thread may deliver messages by tipc_conn_sendmsg(), this is why the following error information appears: "Sending subscription event failed, no memory" To eliminate it, allow connection shutdown callback function to be called before connection id is removed in tipc_close_conn(), which makes the sending thread know the truth in time that its socket is closed so that it doesn't send message to it. We also remove the "Sending XXX failed..." error reporting for topology and config services. Signed-off-by:
-
