Pull power management fixes from Rafael Wysocki:
 "These fix up the intel_pstate driver after recent changes to prevent
  it from printing pointless messages and update the turbostat utility
  (mostly fixes and new hardware support).

  Specifics:

   - Make intel_pstate only load on Intel processors and prevent it from
     printing pointless failure messages (Borislav Petkov).

   - Update the turbostat utility:
      * Assorted fixes (Ben Hutchings, Len Brown, Prarit Bhargava).
      * Support for AMD Fam 17h (Zen) RAPL and package power (Calvin
        Walton).
      * Support for Intel Icelake and for systems with more than one die
        per package (Len Brown).
      * Cleanups (Len Brown)"

* tag 'pm-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq/intel_pstate: Load only on Intel hardware
  tools/power turbostat: update version number
  tools/power turbostat: Warn on bad ACPI LPIT data
  tools/power turbostat: Add checks for failure of fgets() and fscanf()
  tools/power turbostat: Also read package power on AMD F17h (Zen)
  tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL
  tools/power turbostat: Do not display an error on systems without a cpufreq driver
  tools/power turbostat: Add Die column
  tools/power turbostat: Add Icelake support
  tools/power turbostat: Cleanup CNL-specific code
  tools/power turbostat: Cleanup CC3-skip code
  tools/power turbostat: Restore ability to execute in topology-order

Pull ACPI fix from Rafael Wysocki:
 "Prevent stale GPE events from triggering spurious system wakeups from
  suspend-to-idle (Furquan Shaikh)"

* tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Clear status of GPEs before enabling them

Pull mfd fixes from Lee Jones:

 - Fix failed reads due to enabled IRQs when suspended; twl-core

 - Fix driver registration when using DT; sprd-sc27xx-spi

 - Fix `make allyesconfig` on x86_64; SUN6I_PRCM

* tag 'mfd-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: sun6i-prcm: Allow to compile with COMPILE_TEST
  mfd: sc27xx: Use SoC compatible string for PMIC devices
  mfd: twl-core: Disable IRQ while suspended

* acpica:
  ACPICA: Clear status of GPEs before enabling them

* pm-tools:
  tools/power turbostat: update version number
  tools/power turbostat: Warn on bad ACPI LPIT data
  tools/power turbostat: Add checks for failure of fgets() and fscanf()
  tools/power turbostat: Also read package power on AMD F17h (Zen)
  tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL
  tools/power turbostat: Do not display an error on systems without a cpufreq driver
  tools/power turbostat: Add Die column
  tools/power turbostat: Add Icelake support
  tools/power turbostat: Cleanup CNL-specific code
  tools/power turbostat: Cleanup CC3-skip code
  tools/power turbostat: Restore ability to execute in topology-order

Pull smb3 fixes from Steve French:
 "Four smb3 fixes for stable:

   - fix an open path where we had an unitialized structure

   - fix for snapshot (previous version) enumeration

   - allow reconnect timeout on handles to be configurable to better
     handle network or server crash

   - correctly handle lack of file_all_info structure"

* tag '5.1-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: a smb2_validate_and_copy_iov failure does not mean the handle is invalid.
  SMB3: Allow persistent handle timeout to be configurable on mount
  smb3: Fix enumerating snapshots to Azure
  cifs: fix kref underflow in close_shroot()

Pull HID fixes from Jiri Kosina:

 - build dependency fix for hid-asus from Arnd Bergmann

 - addition of omitted mapping of _ASSISTANT key from Dmitry Torokhov

 - race condition fix in hid-debug inftastructure from He, Bo

 - fixed support for devices with big maximum report size from Kai-Heng
   Feng

 - deadlock fix in hid-steam from Rodrigo Rivas Costa

 - quite a few device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: input: add mapping for Assistant key
  HID: i2c-hid: Disable runtime PM on Synaptics touchpad
  HID: quirks: Fix keyboard + touchpad on Lenovo Miix 630
  HID: logitech: Handle 0 scroll events for the m560
  HID: debug: fix race condition with between rdesc_show() and device removal
  HID: logitech: check the return value of create_singlethread_workqueue
  HID: Increase maximum report size allowed by hid_field_extract()
  HID: steam: fix deadlock with input devices.
  HID: uclogic: remove redudant duplicated null check on ver_ptr
  HID: quirks: Drop misused kernel-doc annotation
  HID: hid-asus: select CONFIG_POWER_SUPPLY
  HID: quirks: use correct format chars in dbg_hid

According to HUTRR89 usage 0x1cb from the consumer page was assigned to
allow launching desktop-aware assistant application, so let's add the
mapping.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Since this driver only has a dependency on ARCH_SUNXI just because it
doesn't make any sense to run it on something else, we can definitely
enable it through COMPILE_TEST as well to get some build coverage.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Pull pidfd fix from Christian Brauner:
 "This should be an uncontroversial fix for pidfd_send_signal() by Jann
  to better align it's behavior with other signal sending functions:

  In one of the early versions of the patchset it was suggested to not
  unconditionally error out when a signal with SI_USER is sent to a
  non-current task (cf. [1]).

  Instead, pidfd_send_signal() currently silently changes this to a
  regular kill signal. While this is technically fine, the semantics are
  weird since the kernel just silently converts a user's request behind
  their back and also no other signal sending function allows to do
  this. It gets more hairy when we introduce sending signals to a
  specific thread soon.

  So let's align pidfd_send_signal() with all the other signal sending
  functions and error out when SI_USER signals are sent to a non-current
  task"

* tag 'pidfd-fixes-v5.1-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  signal: don't silently convert SI_USER signals to non-current pidfd

Merge tag 'hwmon-for-v5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Couple of minor hwmon fixes"

* tag 'hwmon-for-v5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  dt-bindings: hwmon: (adc128d818) Specify ti,mode property size
  hwmon: (ntc_thermistor) Fix temperature type reporting
  hwmon: (occ) Fix power sensor indexing
  hwmon: (w83773g) Select REGMAP_I2C to fix build error

The @linaro version won't be valid much longer.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We should use SoC compatible string in stead of wildcard string for
PMIC child devices.

Fixes: 0419a75b (arm64: dts: sprd: Remove wildcard compatible string)
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Since commit 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get()
in i2c-omap.c returns -EACCES.

[   86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   86.485473] printk: Suspending console(s) (use no_console_suspend to debug)
[   86.555572] Disabling non-boot CPUs ...
[   86.555664] Successfully put all powerdomains to target state
[   86.563720] twl: Read failed (mod 1, reg 0x01 count 1)
[   86.563751] twl4030: I2C error -13 reading PIH ISR
[   86.563812] twl: Read failed (mod 1, reg 0x01 count 1)
[   86.563812] twl4030: I2C error -13 reading PIH ISR
[   86.563873] twl: Read failed (mod 1, reg 0x01 count 1)
[   86.563903] twl4030: I2C error -13 reading PIH ISR

This happens when we wakeup via something behing twl4030 (powerbutton or rtc
alarm). This goes on for minutes until the system is finally resumed.
Disable the irq on suspend and enable it on resume to avoid
having i2c access problems when the irq registers are checked.

Fixes: 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This driver is Intel-only so loading on anything which is not Intel is
pointless. Prevent it from doing so.

While at it, correct the "not supported" print statement to say CPU
"model" which is what that test does.

Fixes: 076b862c (cpufreq: intel_pstate: Add reasons for failure and debug messages)
Suggested-by: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The current sys_pidfd_send_signal() silently turns signals with explicit
SI_USER context that are sent to non-current tasks into signals with
kernel-generated siginfo.
This is unlike do_rt_sigqueueinfo(), which returns -EPERM in this case.
If a user actually wants to send a signal with kernel-provided siginfo,
they can do that with pidfd_send_signal(pidfd, sig, NULL, 0); so allowing
this case is unnecessary.

Instead of silently replacing the siginfo, just bail out with an error;
this is consistent with other interfaces and avoids special-casing behavior
based on security checks.

Fixes: 3eb39f47 ("signal: add pidfd_send_signal() syscall")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Christian Brauner <christian@brauner.io>

It only means that we do not have a valid cached value for the
file_all_info structure.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Reconnecting after server or network failure can be improved
(to maintain availability and protect data integrity) by allowing
the client to choose the default persistent (or resilient)
handle timeout in some use cases.  Today we default to 0 which lets
the server pick the default timeout (usually 120 seconds) but this
can be problematic for some workloads.  Add the new mount parameter
to cifs.ko for SMB3 mounts "handletimeout" which enables the user
to override the default handle timeout for persistent (mount
option "persistenthandles") or resilient handles (mount option
"resilienthandles").  Maximum allowed is 16 minutes (960000 ms).
Units for the timeout are expressed in milliseconds. See
section 2.2.14.2.12 and 2.2.31.3 of the MS-SMB2 protocol
specification for more information.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>

Some servers (see MS-SMB2 protocol specification
section 3.3.5.15.1) expect that the FSCTL enumerate snapshots
is done twice, with the first query having EXACTLY the minimum
size response buffer requested (16 bytes) which refreshes
the snapshot list (otherwise that and subsequent queries get
an empty list returned).  So had to add code to set
the maximum response size differently for the first snapshot
query (which gets the size needed for the second query which
contains the actual list of snapshots).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.19+

Fix a bug where we used to not initialize the cached fid structure at all
in open_shroot() if the open was successful but we did not get a lease.
This would leave the structure uninitialized and later when we close the handle
we would in close_shroot() try to kref_put() an uninitialized refcount.

Fix this by always initializing this structure if the open was successful
but only do the extra get() if we got a lease.
This extra get() is only used to hold the structure until we get a lease
break from the server at which point we will kref_put() it during lease
processing.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>

Pull aio race fixes and cleanups from Al Viro.

The aio code had more issues with error handling and races with the aio
completing at just the right (wrong) time along with freeing the file
descriptor when another thread closes the file.

Just a couple of these commits are the actual fixes: the others are
cleanups to either make the fixes simpler, or to make the code legible
and understandable enough that we hope there's no more fundamental races
hiding.

* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  aio: move sanity checks and request allocation to io_submit_one()
  deal with get_reqs_available() in aio_get_req() itself
  aio: move dropping ->ki_eventfd into iocb_destroy()
  make aio_read()/aio_write() return int
  Fix aio_poll() races
  aio: store event at final iocb_put()
  aio: keep io_event in aio_kiocb
  aio: fold lookup_kiocb() into its sole caller
  pin iocb through aio.

Pull symlink fixes from Al Viro:
 "The ceph fix is already in mainline, Daniel's bpf fix is in bpf tree
  (1da6c4d9 "bpf: fix use after free in bpf_evict_inode"), the rest
  is in here"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  debugfs: fix use-after-free on symlink traversal
  ubifs: fix use-after-free on symlink traversal
  jffs2: fix use-after-free on symlink traversal

We have a new Dell laptop which has the synaptics I2C touchpad
(06cb:7e7e) on it. After booting up the Linux, the touchpad doesn't
work, there is no interrupt when touching the touchpad, after
disable the runtime PM, everything works well.

I also tried the quirk of I2C_HID_QUIRK_DELAY_AFTER_SLEEP, it is
better after applied this quirk, there are interrupts but data it
reports is invalid.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

symlink body shouldn't be freed without an RCU delay.  Switch debugfs to
->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback.  Similar to solution for bpf, only here it's even
more obvious that ->evict_inode() can be dropped.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull KVM fixes from Paolo Bonzini:
 "A collection of x86 and ARM bugfixes, and some improvements to
  documentation.

  On top of this, a cleanup of kvm_para.h headers, which were exported
  by some architectures even though they not support KVM at all. This is
  responsible for all the Kbuild changes in the diffstat"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
  Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION
  KVM: doc: Document the life cycle of a VM and its resources
  KVM: selftests: complete IO before migrating guest state
  KVM: selftests: disable stack protector for all KVM tests
  KVM: selftests: explicitly disable PIE for tests
  KVM: selftests: assert on exit reason in CR4/cpuid sync test
  KVM: x86: update %rip after emulating IO
  x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init
  kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs
  KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts
  kvm: don't redefine flags as something else
  kvm: mmu: Used range based flushing in slot_handle_level_range
  KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported
  KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region()
  kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields
  KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)
  KVM: Reject device ioctls from processes other than the VM's creator
  KVM: doc: Fix incorrect word ordering regarding supported use of APIs
  KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'
  KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT
  ...

Pull x86 fixes from Thomas Gleixner:
 "A pile of x86 updates:

   - Prevent exceeding he valid physical address space in the /dev/mem
     limit checks.

   - Move all header content inside the header guard to prevent compile
     failures.

   - Fix the bogus __percpu annotation in this_cpu_has() which makes
     sparse very noisy.

   - Disable switch jump tables completely when retpolines are enabled.

   - Prevent leaking the trampoline address"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/realmode: Make set_real_mode_mem() static inline
  x86/cpufeature: Fix __percpu annotation in this_cpu_has()
  x86/mm: Don't exceed the valid physical address space
  x86/retpolines: Disable switch jump tables when retpolines are enabled
  x86/realmode: Don't leak the trampoline kernel address
  x86/boot: Fix incorrect ifdeffery scope
  x86/resctrl: Remove unused variable

Pull perf tooling fixes from Thomas Gleixner:
 "Core libraries:
   - Fix max perf_event_attr.precise_ip detection.
   - Fix parser error for uncore event alias
   - Fixup ordering of kernel maps after obtaining the main kernel map
     address.

  Intel PT:
   - Fix TSC slip where A TSC packet can slip past MTC packets so that
     the timestamp appears to go backwards.
   - Fixes for exported-sql-viewer GUI conversion to python3.

  ARM coresight:
   - Fix the build by adding a missing case value for enumeration value
     introduced in newer library, that now is the required one.

  tool headers:
   - Syncronize kernel headers with the kernel, getting new io_uring and
     pidfd_send_signal syscalls so that 'perf trace' can handle them"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf pmu: Fix parser error for uncore event alias
  perf scripts python: exported-sql-viewer.py: Fix python3 support
  perf scripts python: exported-sql-viewer.py: Fix never-ending loop
  perf machine: Update kernel map address and re-order properly
  tools headers uapi: Sync powerpc's asm/kvm.h copy with the kernel sources
  tools headers: Update x86's syscall_64.tbl and uapi/asm-generic/unistd
  tools headers uapi: Update drm/i915_drm.h
  tools arch x86: Sync asm/cpufeatures.h with the kernel sources
  tools headers uapi: Sync linux/fcntl.h to get the F_SEAL_FUTURE_WRITE addition
  tools headers uapi: Sync asm-generic/mman-common.h and linux/mman.h
  perf evsel: Fix max perf_event_attr.precise_ip detection
  perf intel-pt: Fix TSC slip
  perf cs-etm: Add missing case value

Pull CPU hotplug fixes from Thomas Gleixner:
 "Two SMT/hotplug related fixes:

   - Prevent crash when HOTPLUG_CPU is disabled and the CPU bringup
     aborts. This is triggered with the 'nosmt' command line option, but
     can happen by any abort condition. As the real unplug code is not
     compiled in, prevent the fail by keeping the CPU in zombie state.

   - Enforce HOTPLUG_CPU for SMP on x86 to avoid the above situation
     completely. With 'nosmt' being a popular option it's required to
     unplug the half brought up sibling CPUs (due to the MCE wreckage)
     completely"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smp: Enforce CONFIG_HOTPLUG_CPU when SMP=y
  cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=n

Pull locking fixlet from Thomas Gleixner:
 "Trivial update to the maintainers file"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Remove deleted file from futex file pattern

Pull core fixes from Thomas Gleixner:
 "A small set of core updates:

   - Make the watchdog respect the selected CPU mask again. That was
     broken by the rework of the watchdog thread management and caused
     inconsistent state and NMI watchdog being unstoppable.

   - Ensure that the objtool build can find the libelf location.

   - Remove dead kcore stub code"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog: Respect watchdog cpumask on CPU hotplug
  objtool: Query pkg-config for libelf location
  proc/kcore: Remove unused kclist_add_remap()

Pull powerpc fixes from Michael Ellerman:
 "Three non-regression fixes.

   - Our optimised memcmp could read past the end of one of the buffers
     and potentially trigger a page fault leading to an oops.

   - Some of our code to read energy management data on PowerVM had an
     endian bug leading to bogus results.

   - When reporting a machine check exception we incorrectly reported
     TLB multihits as D-Cache multhits due to a missing entry in the
     array of causes.

  Thanks to: Chandan Rajendra, Gautham R. Shenoy, Mahesh Salgaonkar,
  Segher Boessenkool, Vaidyanathan Srinivasan"

* tag 'powerpc-5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries/mce: Fix misleading print for TLB mutlihit
  powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexes
  powerpc/64: Fix memcmp reading past the end of src/dest

Pull dmaengine fixes from Vinod Koul:

 - Revert "dmaengine: stm32-mdma: Add a check on read_u32_array" as that
   caused regression

 - Fix MAINTAINER file uniphier-mdmac.c file path

* tag 'dmaengine-fix-5.1-rc3' of git://git.infradead.org/users/vkoul/slave-dma:
  MAINTAINERS: Fix uniphier-mdmac.c file path
  dmaengine: stm32-mdma: Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"

Merge tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED fixes from Jacek Anaszewski:

 - fix refcnt leak on interface rename

 - use memcpy in device_name_store() to avoid including garbage from a
   previous, longer value in the device_name

 - fix a potential NULL pointer dereference in case of_match_device()
   cannot find a match

* tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: trigger: netdev: use memcpy in device_name_store
  leds: pca9532: fix a potential NULL pointer dereference
  leds: trigger: netdev: fix refcnt leak on interface rename

Pull GPIO fixes from Linus Walleij:
 "As you can see [in the git history] I was away on leave and Bartosz
  kindly stepped in and collected a slew of fixes, I pulled them into my
  tree in two sets and merged some two more fixes (fixing my own caused
  bugs) on top.

  Summary:

   - Revert the extended use of gpio_set_config() and think about how we
     can do this properly.

   - Fix up the SPI CS GPIO handling so it now works properly on the SPI
     bus children, as intended.

   - Error paths and driver fixes"

* tag 'gpio-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mockup: use simple_read_from_buffer() in debugfs read callback
  gpio: of: Fix of_gpiochip_add() error path
  gpio: of: Check for "spi-cs-high" in child instead of parent node
  gpio: of: Check propname before applying "cs-gpios" quirks
  gpio: mockup: fix debugfs read
  Revert "gpio: use new gpio_set_config() helper in more places"
  gpio: aspeed: fix a potential NULL pointer dereference
  gpio: amd-fch: Fix bogus SPDX identifier
  gpio: adnp: Fix testing wrong value in adnp_gpio_direction_input
  gpio: exar: add a check for the return value of ida_simple_get fails

If userspace doesn't end the input with a newline (which can easily
happen if the write happens from a C program that does write(fd,
iface, strlen(iface))), we may end up including garbage from a
previous, longer value in the device_name. For example

# cat device_name

# printf 'eth12' > device_name
# cat device_name
eth12
# printf 'eth3' > device_name
# cat device_name
eth32

I highly doubt anybody is relying on this behaviour, so switch to
simply copying the bytes (we've already checked that size is <
IFNAMSIZ) and unconditionally zero-terminate it; of course, we also
still have to strip a trailing newline.

This is also preparation for future patches.

Fixes: 06f502f5 ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

In case of_match_device cannot find a match, return -EINVAL to avoid
NULL pointer dereference.

Fixes: fa4191a6 ("leds: pca9532: Add device tree support")
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for 5.1-rc3, and one driver
  removal.

  The biggest thing here is the removal of the mt7621-eth driver as a
  "real" network driver was merged in 5.1-rc1 for this hardware, so this
  old driver can now be removed.

  Other than that, there are just a number of small fixes, all resolving
  reported issues and some potential corner cases for error handling
  paths.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vt6655: Remove vif check from vnt_interrupt
  staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir()
  staging: octeon-ethernet: fix incorrect PHY mode
  staging: vc04_services: Fix an error code in vchiq_probe()
  staging: erofs: fix error handling when failed to read compresssed data
  staging: vt6655: Fix interrupt race condition on device start up.
  staging: rtlwifi: Fix potential NULL pointer dereference of kzalloc
  staging: rtl8712: uninitialized memory in read_bbreg_hdl()
  staging: rtlwifi: rtl8822b: fix to avoid potential NULL pointer dereference
  staging: rtl8188eu: Fix potential NULL pointer dereference of kcalloc
  staging, mt7621-pci: fix build without pci support
  staging: speakup_soft: Fix alternate speech with other synths
  staging: axis-fifo: add CONFIG_OF dependency
  staging: olpc_dcon_xo_1: add missing 'const' qualifier
  staging: comedi: ni_mio_common: Fix divide-by-zero for DIO cmdtest
  staging: erofs: fix to handle error path of erofs_vmap()
  staging: mt7621-dts: update ethernet settings.
  staging: remove mt7621-eth