During task migration, tasks may transfer between two css_sets which
are associated with the same cgroup.  If those tasks are the only
tasks in the cgroup, this currently triggers a spurious de-populated
event on the cgroup.

Fix it by bumping up populated count before bumping it down during
migration to ensure that it doesn't reach zero spuriously.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>

css_sets are hashed by their subsys[] contents and in cgroup_init()
init_css_set is hashed early, before subsystem inits, when all entries
in its subsys[] are NULL, so that cgroup_dfl_root initialization can
find and link to it.  As subsystems are initialized,
init_css_set.subsys[] is filled up but the hashing is never updated
making init_css_set hashed in the wrong place.  While incorrect, this
doesn't cause a critical failure as css_set management code would
create an identical css_set dynamically.

Fix it by rehashing init_css_set after subsystems are initialized.
While at it, drop unnecessary @key local variable.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>

An associated css can be around for quite a while after a cgroup
directory has been removed. In general, it makes sense to reset it to
defaults so as not to worry about any remnants. For instance, memory
cgroup needs to reset memory.low, otherwise pages charged to a dead
cgroup might never get reclaimed. There's ->css_reset callback, which
would fit perfectly for the purpose. Currently, it's only called when a
subsystem is disabled in the unified hierarchy and there are other
subsystems dependant on it. Let's call it on css destruction as well.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

There is a mistake about the print format name:id <--> %d:%s, which
the name is 'char *' type and id is 'int' type.  Change "name:id" to
"id:name" instead to be consistent with "cgroup_subsys %d:%s".
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Acked-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

No internal process rule is enforced by cgroup_migrate_prepare_dst()
during process migration.  It tests whether the target cgroup's
->child_subsys_mask is zero which is different from "subtree_control"
write path which tests ->subtree_control.  This hasn't mattered
because up until now, both ->child_subsys_mask and ->subtree_control
are zero or non-zero at the same time.  However, with the planned
addition of implicit controllers, this will no longer be true.

This patch prepares for the change by making
cgorup_migrate_prepare_dst() test ->subtree_control instead.
Signed-off-by: Tejun Heo <tj@kernel.org>

The function currently returns -EBADF for a directory on the default
hierarchy.  Make it also recognize cgroup2_fs_type.  This will be used
for perf_event cgroup2 support.
Signed-off-by: Tejun Heo <tj@kernel.org>

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>

These var names are unnecessarily unwiedly and another similar
variable will be added.  Let's shorten them.
Signed-off-by: Tejun Heo <tj@kernel.org>

After the recent do_each_subsys_mask() conversion, there's no reason
to use ulong for subsystem masks.  We'll be adding more subsystem
masks to persistent data structures, let's reduce its size to u16
which should be enough for now and the foreseeable future.

This doesn't create any noticeable behavior differences.

v2: Johannes spotted that the initial patch missed cgroup_no_v1_mask.
    Converted.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>

There are several places in cgroup_subtree_control_write() which can
use do_each_subsys_mask() instead of manual mask testing.  Use it.

No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>

for_each_subsys_which() allows iterating subsystems specified in a
subsystem bitmask; unfortunately, it requires the mask to be an
unsigned long l-value which can be inconvenient and makes it awkward
to use a smaller type for subsystem masks.

This patch converts for_each_subsy_which() to do-while style which
allows it to drop the l-value requirement.  The new iterator is named
do_each_subsys_mask() / while_each_subsys_mask().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>

For consistency with cgroup->subtree_control.

* cgroup->child_subsys_mask -> cgroup->subtree_ss_mask
* cgroup_calc_child_subsys_mask() -> cgroup_calc_subtree_ss_mask()
* cgroup_refresh_child_subsys_mask() -> cgroup_refresh_subtree_ss_mask()

No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>

This reverts commit 56c807ba.

cgroup_subsys->css_e_css_changed() was supposed to be used by cgroup
writeback support; however, the change to per-inode cgroup association
made it unnecessary and the callback doesn't have any user.  Remove
it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>

cgroup_addrm_files() incorrectly returned 0 after add failure.  Fix
it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>

Add cgroup_no_v1= to kernel-parameters.txt, and a small blurb to
cgroup-v2.txt section about transitioning from cgroup to cgroup2.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

Testing cgroup2 can be painful with system software automatically
mounting and populating all cgroup controllers in v1 mode. Sometimes
they can be unmounted from rc.local, sometimes even that is too late.

Provide a commandline option to disable certain controllers in v1
mounts, so that they remain available for cgroup2 mounts.

Example use:

cgroup_no_v1=memory,cpu
cgroup_no_v1=all

Disabling will be confirmed at boot-time as such:

[    0.013770] Disabling cpu control group subsystem in v1 mounts
[    0.016004] Disabling memory control group subsystem in v1 mounts
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

The file cgroup-debug.c had been removed from commit fe693435
(cgroups: move the cgroup debug subsys into cgroup.c to access internal state).
Remain the CFLAGS_REMOVE_cgroup-debug.o = $(CC_FLAGS_FTRACE)
useless in kernel/Makefile.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Acked-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

This should have happened in 6255c46f (cgroup: rename cgroup
documentations, 2016-01-11).
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Tejun Heo <tj@kernel.org>

There are three subsystem callbacks in css shutdown path -
css_offline(), css_released() and css_free().  Except for
css_released(), cgroup core didn't guarantee the order of invocation.
css_offline() or css_free() could be called on a parent css before its
children.  This behavior is unexpected and led to bugs in cpu and
memory controller.

The previous patch updated ordering for css_offline() which fixes the
cpu controller issue.  While there currently isn't a known bug caused
by misordering of css_free() invocations, let's fix it too for
consistency.

css_free() ordering can be trivially fixed by moving putting of the
parent css below css_free() invocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>

There are three subsystem callbacks in css shutdown path -
css_offline(), css_released() and css_free().  Except for
css_released(), cgroup core didn't guarantee the order of invocation.
css_offline() or css_free() could be called on a parent css before its
children.  This behavior is unexpected and led to bugs in cpu and
memory controller.

This patch updates offline path so that a parent css is never offlined
before its children.  Each css keeps online_cnt which reaches zero iff
itself and all its children are offline and offline_css() is invoked
only after online_cnt reaches zero.

This fixes the memory controller bug and allows the fix for cpu
controller.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-by: Brian Christiansen <brian.o.christiansen@gmail.com>
Link: http://lkml.kernel.org/g/5698A023.9070703@de.ibm.com
Link: http://lkml.kernel.org/g/CAKB58ikDkzc8REt31WBkD99+hxNzjK4+FBmhkgS+NVrC9vjMSg@mail.gmail.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org

If "cpuset.memory_migrate" is set, when a process is moved from one
cpuset to another with a different memory node mask, pages in used by
the process are migrated to the new set of nodes.  This was performed
synchronously in the ->attach() callback, which is synchronized
against process management.  Recently, the synchronization was changed
from per-process rwsem to global percpu rwsem for simplicity and
optimization.

Combined with the synchronous mm migration, this led to deadlocks
because mm migration could schedule a work item which may in turn try
to create a new worker blocking on the process management lock held
from cgroup process migration path.

This heavy an operation shouldn't be performed synchronously from that
deep inside cgroup migration in the first place.  This patch punts the
actual migration to an ordered workqueue and updates cgroup process
migration and cpuset config update paths to flush the workqueue after
all locks are released.  This way, the operations still seem
synchronous to userland without entangling mm migration with process
management synchronization.  CPU hotplug can also invoke mm migration
but there's no reason for it to wait for mm migrations and thus
doesn't synchronize against their completions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # v4.4+

Pull NVMe updates from Jens Axboe:
 "Last branch for this series is the nvme changes.  It's in a separate
  branch to avoid splitting too much between core and NVMe changes,
  since NVMe is still helping drive some blk-mq changes.  That said, not
  a huge amount of core changes in here.  The grunt of the work is the
  continued split of the code"

* 'for-4.5/nvme' of git://git.kernel.dk/linux-block: (67 commits)
  uapi: update install list after nvme.h rename
  NVMe: Export NVMe attributes to sysfs group
  NVMe: Shutdown controller only for power-off
  NVMe: IO queue deletion re-write
  NVMe: Remove queue freezing on resets
  NVMe: Use a retryable error code on reset
  NVMe: Fix admin queue ring wrap
  nvme: make SG_IO support optional
  nvme: fixes for NVME_IOCTL_IO_CMD on the char device
  nvme: synchronize access to ctrl->namespaces
  nvme: Move nvme_freeze/unfreeze_queues to nvme core
  PCI/AER: include header file
  NVMe: Export namespace attributes to sysfs
  NVMe: Add pci error handlers
  block: remove REQ_NO_TIMEOUT flag
  nvme: merge iod and cmd_info
  nvme: meta_sg doesn't have to be an array
  nvme: properly free resources for cancelled command
  nvme: simplify completion handling
  nvme: special case AEN requests
  ...

Pull lightnvm fixes and updates from Jens Axboe:
 "This should have been part of the drivers branch, but it arrived a bit
  late and wasn't based on the official core block driver branch.  So
  they got a small scolding, but got a pass since it's still new.  Hence
  it's in a separate branch.

  This is mostly pure fixes, contained to lightnvm/, and minor feature
  additions"

* 'for-4.5/lightnvm' of git://git.kernel.dk/linux-block: (26 commits)
  lightnvm: ensure that nvm_dev_ops can be used without CONFIG_NVM
  lightnvm: introduce factory reset
  lightnvm: use system block for mm initialization
  lightnvm: introduce ioctl to initialize device
  lightnvm: core on-disk initialization
  lightnvm: introduce mlc lower page table mappings
  lightnvm: add mccap support
  lightnvm: manage open and closed blocks separately
  lightnvm: fix missing grown bad block type
  lightnvm: reference rrpc lun in rrpc block
  lightnvm: introduce nvm_submit_ppa
  lightnvm: move rq->error to nvm_rq->error
  lightnvm: support multiple ppas in nvm_erase_ppa
  lightnvm: move the pages per block check out of the loop
  lightnvm: sectors first in ppa list
  lightnvm: fix locking and mempool in rrpc_lun_gc
  lightnvm: put block back to gc list on its reclaim fail
  lightnvm: check bi_error in gc
  lightnvm: return the get_bb_tbl return value
  lightnvm: refactor end_io functions for sync
  ...

Pull block driver updates from Jens Axboe:
 "This is the block driver pull request for 4.5, with the exception of
  NVMe, which is in a separate branch and will be posted after this one.

  This pull request contains:

   - A set of bcache stability fixes, which have been acked by Kent.
     These have been used and tested for more than a year by the
     community, so it's about time that they got in.

   - A set of drbd updates from the drbd team (Andreas, Lars, Philipp)
     and Markus Elfring, Oleg Drokin.

   - A set of fixes for xen blkback/front from the usual suspects, (Bob,
     Konrad) as well as community based fixes from Kiri, Julien, and
     Peng.

   - A 2038 time fix for sx8 from Shraddha, with a fix from me.

   - A small mtip32xx cleanup from Zhu Yanjun.

   - A null_blk division fix from Arnd"

* 'for-4.5/drivers' of git://git.kernel.dk/linux-block: (71 commits)
  null_blk: use sector_div instead of do_div
  mtip32xx: restrict variables visible in current code module
  xen/blkfront: Fix crash if backend doesn't follow the right states.
  xen/blkback: Fix two memory leaks.
  xen/blkback: make st_ statistics per ring
  xen/blkfront: Handle non-indirect grant with 64KB pages
  xen-blkfront: Introduce blkif_ring_get_request
  xen-blkback: clear PF_NOFREEZE for xen_blkif_schedule()
  xen/blkback: Free resources if connect_ring failed.
  xen/blocks: Return -EXX instead of -1
  xen/blkback: make pool of persistent grants and free pages per-queue
  xen/blkback: get the number of hardware queues/rings from blkfront
  xen/blkback: pseudo support for multi hardware queues/rings
  xen/blkback: separate ring information out of struct xen_blkif
  xen/blkfront: correct setting for xen_blkif_max_ring_order
  xen/blkfront: make persistent grants pool per-queue
  xen/blkfront: Remove duplicate setting of ->xbdev.
  xen/blkfront: Cleanup of comments, fix unaligned variables, and syntax errors.
  xen/blkfront: negotiate number of queues/rings to be used with backend
  xen/blkfront: split per device io_lock
  ...

Expose an interface to allow users to mark several accesses together as
being user space accesses, allowing batching of the surrounding user
space access markers (SMAP on x86, PAN on arm64, domain register
switching on arm).

This is currently only used for the user string lenth and copying
functions, where the SMAP overhead on x86 drowned the actual user
accesses (only noticeable on newer microarchitectures that support SMAP
in the first place, of course).

* user access batching branch:
  Use the new batched user accesses in generic user string handling
  Add 'unsafe' user access functions for batched accesses
  x86: reorganize SMAP handling in user space accesses

Merge third patch-bomb from Andrew Morton:
 "I'm pretty much done for -rc1 now:

   - the rest of MM, basically

   - lib/ updates

   - checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit

   - cpu_mask simplifications

   - kexec, rapidio, MAINTAINERS etc, etc.

   - more dma-mapping cleanups/simplifications from hch"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits)
  MAINTAINERS: add/fix git URLs for various subsystems
  mm: memcontrol: add "sock" to cgroup2 memory.stat
  mm: memcontrol: basic memory statistics in cgroup2 memory controller
  mm: memcontrol: do not uncharge old page in page cache replacement
  Documentation: cgroup: add memory.swap.{current,max} description
  mm: free swap cache aggressively if memcg swap is full
  mm: vmscan: do not scan anon pages if memcg swap limit is hit
  swap.h: move memcg related stuff to the end of the file
  mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online
  mm: vmscan: pass memcg to get_scan_count()
  mm: memcontrol: charge swap to cgroup2
  mm: memcontrol: clean up alloc, online, offline, free functions
  mm: memcontrol: flatten struct cg_proto
  mm: memcontrol: rein in the CONFIG space madness
  net: drop tcp_memcontrol.c
  mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM
  mm: memcontrol: allow to disable kmem accounting for cgroup2
  mm: memcontrol: account "kmem" consumers in cgroup2 memory controller
  mm: memcontrol: move kmem accounting code to CONFIG_MEMCG
  mm: memcontrol: separate kmem code from legacy tcp accounting code
  ...

Pull overlayfs updates from Miklos Szeredi:
 "This contains several bug fixes and a new mount option
  'default_permissions' that allows read-only exported NFS
  filesystems to be used as lower layer"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: check dentry positiveness in ovl_cleanup_whiteouts()
  ovl: setattr: check permissions before copy-up
  ovl: root: copy attr
  ovl: move super block magic number to magic.h
  ovl: use a minimal buffer in ovl_copy_xattr
  ovl: allow zero size xattr
  ovl: default permissions

Pull fuse updates from Miklos Szeredi:
 "This adds SEEK_HOLE and SEEK_DATA support in lseek"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add support for SEEK_HOLE and SEEK_DATA in lseek

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v4.5 merge window:

  Enumeration:
   - Simplify config space size computation (Bjorn Helgaas)
   - Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
   - Support PCIe devices with short cfg_size (Jason S. McMullan)
   - Add Netronome vendor and device IDs (Jason S. McMullan)
   - Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
   - Add Netronome NFP4000 PF device ID (Simon Horman)
   - Limit config space size for Netronome NFP4000 (Simon Horman)
   - Print warnings for all invalid expansion ROM headers (Vladis Dronov)

  Resource management:
   - Fix minimum allocation address overwrite (Christoph Biedl)

  PCI device hotplug:
   - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
   - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
   - shpchp: Constify hpc_ops structure (Julia Lawall)
   - ibmphp: Remove unneeded NULL test (Julia Lawall)

  Power management:
   - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)

  Virtualization
   - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)

  MSI:
   - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
   - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
   - Initialize MSI capability for all architectures (Guilherme G. Piccoli)
   - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)

  ARM Versatile host bridge driver:
   - Remove unused pci_sys_data structures (Lorenzo Pieralisi)

  Broadcom iProc host bridge driver:
   - Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
   - Do not use 0x in front of %pap (Dmitry V. Krivenok)
   - Update iProc PCIe device tree binding (Ray Jui)
   - Add PAXC interface support (Ray Jui)
   - Add iProc PCIe MSI device tree binding (Ray Jui)
   - Add iProc PCIe MSI support (Ray Jui)

  Freescale i.MX6 host bridge driver:
   - Use gpio_set_value_cansleep() (Fabio Estevam)
   - Add support for active-low reset GPIO (Petr Štetiar)

  HiSilicon host bridge driver:
   - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)

  Intel VMD host bridge driver:
   - Export irq_domain_set_info() for module use (Keith Busch)
   - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
   - Use 32 bit PCI domain numbers (Keith Busch)
   - Add driver for Intel Volume Management Device (VMD) (Keith Busch)

  Qualcomm host bridge driver:
   - Document PCIe devicetree bindings (Stanimir Varbanov)
   - Add Qualcomm PCIe controller driver (Stanimir Varbanov)
   - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
   - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)

  Renesas R-Car host bridge driver:
   - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
   - Allow DT to override default window settings (Phil Edworthy)
   - Convert to DT resource parsing API (Phil Edworthy)
   - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
   - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
   - Add runtime PM support to pcie-rcar (Phil Edworthy)
   - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
   - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
   - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - Simplify control flow (Bjorn Helgaas)
   - Make config accessor override checking symmetric (Bjorn Helgaas)
   - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)

  Miscellaneous:
   - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
   - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
   - Fix all whitespace issues (Bogicevic Sasa)
   - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
   - Use to_pci_dev() instead of open-coding it (Geliang Tang)
   - Use kobj_to_dev() instead of open-coding it (Geliang Tang)
   - Use list_for_each_entry() to simplify code (Geliang Tang)
   - Fix typos in <linux/msi.h> (Thomas Petazzoni)
   - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)"

* tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
  PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183
  PCI: Limit config space size for Netronome NFP4000
  PCI: Add Netronome NFP4000 PF device ID
  x86/PCI: Add driver for Intel Volume Management Device (VMD)
  PCI/AER: Use 32 bit PCI domain numbers
  x86/PCI: Allow DMA ops specific to a PCI domain
  irqdomain: Export irq_domain_set_info() for module use
  PCI: host: Add of_pci_get_host_bridge_resources() stub
  genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains
  PCI: rcar: Add Gen2 PHY setup to pcie-rcar
  PCI: rcar: Add runtime PM support to pcie-rcar
  PCI: designware: Make config accessor override checking symmetric
  PCI: ibmphp: Remove unneeded NULL test
  ARM: dts: ifc6410: enable PCIe DT node for this board
  ARM: dts: apq8064: add PCIe devicetree node
  PCI: hotplug: Use list_for_each_entry() to simplify code
  PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
  PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers
  PCI: Avoid iterating through memory outside the resource window
  PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot
  ...

Merge tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set of changes contains a new driver for OMAP (using the
  dual-mode timers) as well as an assortment of fixes all across the
  board"

* tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Mark all devices as "might sleep"
  pwm: omap-dmtimer: Potential NULL dereference on error
  pwm: add HAS_IOMEM dependency to PWM_FSL_FTM
  pwm: Add PWM driver for OMAP using dual-mode timers
  pwm: rcar: Improve accuracy of frequency division setting
  pwm: lpc32xx: return ERANGE, if requested period is not supported
  pwm: lpc32xx: fix and simplify duty cycle and period calculations
  pwm: lpc32xx: make device usable with common clock framework
  pwm: lpc32xx: correct number of PWM channels from 2 to 1
  dt: lpc32xx: pwm: update documentation of LPC32xx PWM device
  dt: lpc32xx: pwm: correct LPC32xx PWM device node example
  pwm: fsl-ftm: Fix clock enable/disable when using PM
  pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
  pwm: lpss: Select core part automatically
  pwm: lpss: Update PWM setting for Broxton
  pwm: bcm2835: Fix email address specification
  pwm: bcm2835: Prevent division by zero
  pwm: bcm2835: Calculate scaler in ->config()
  pwm: lpss: Remove ->free() callback

Pull CRIS updates from Jesper Nilsson:
 "Just some fixups for section mismatches from Guenter"

* tag 'cris-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
  cris: Fix section mismatches in architecture startup code
  cris: debugport: Fix section mismatches

Pull h8300 updates from Yoshinori Sato:
 - Add KGDB support
 - zImage fix
 - various cleanup

* tag 'for-4.5' of git://git.osdn.jp/gitroot/uclinux-h8/linux:
  h8300: System call entry enable interrupt.
  h8300: show_stack cleanup
  h8300: Restraint of warning.
  h8300: Add KGDB support.
  irqchip: renesas-h8s: Replace ctrl_outw/ctrl_inw with writew/readw
  h8300: signal stack fix
  h8300: Add LZO compression
  h8300: zImage alignment fix
  clk: h8300: Remove "sh73a0-" part from compatible value
  h8300: zImage alignment fix

Commit d1cd2142 ("pwm: Set enable state properly on failed call to
enable") introduced a mutex that is needed to protect internal state of
PWM devices. Since that mutex is acquired in pwm_set_polarity() and in
pwm_enable() and might potentially block, all PWM devices effectively
become "might sleep".

It's rather pointless to keep the .can_sleep field around, but given
that there are external users let's postpone the removal for the next
release cycle.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Pull more power management and ACPI updates from Rafael Wysocki:
 "This includes fixes on top of the previous batch of PM+ACPI updates
  and some new material as well.

  From the new material perspective the most significant are the driver
  core changes that should allow USB devices to stay suspended over
  system suspend/resume cycles if they have been runtime-suspended
  already beforehand.  Apart from that, ACPICA is updated to upstream
  revision 20160108 (cosmetic mostly, but including one fixup on top of
  the previous ACPICA update) and there are some devfreq updates the
  didn't make it before (due to timing).

  A few recent regressions are fixed, most importantly in the cpuidle
  menu governor and in the ACPI backlight driver and some x86 platform
  drivers depending on it.

  Some more bugs are fixed and cleanups are made on top of that.

  Specifics:

   - Modify the driver core and the USB subsystem to allow USB devices
     to stay suspended over system suspend/resume cycles if they have
     been runtime-suspended already beforehand and fix some bugs on top
     of these changes (Tomeu Vizoso, Rafael Wysocki).

   - Update ACPICA to upstream revision 20160108, including updates of
     the ACPICA's copyright notices, a code fixup resulting from a
     regression fix that was necessary in the upstream code only (the
     regression fixed by it has never been present in Linux) and a
     compiler warning fix (Bob Moore, Lv Zheng).

   - Fix a recent regression in the cpuidle menu governor that broke it
     on practically all architectures other than x86 and make a couple
     of optimizations on top of that fix (Rafael Wysocki).

   - Clean up the selection of cpuidle governors depending on whether or
     not the kernel is configured for tickless systems (Jean Delvare).

   - Revert a recent commit that introduced a regression in the ACPI
     backlight driver, address the problem it attempted to fix in a
     different way and revert one more cosmetic change depending on the
     problematic commit (Hans de Goede).

   - Add two more ACPI backlight quirks (Hans de Goede).

   - Fix a few minor problems in the core devfreq code, clean it up a
     bit and update the MAINTAINERS information related to it (Chanwoo
     Choi, MyungJoo Ham).

   - Improve an error message in the ACPI fan driver (Andy Lutomirski).

   - Fix a recent build regression in the cpupower tool (Shreyas
     Prabhu)"

* tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  cpuidle: menu: Avoid pointless checks in menu_select()
  sched / idle: Drop default_idle_call() fallback from call_cpuidle()
  cpupower: Fix build error in cpufreq-info
  cpuidle: Don't enable all governors by default
  cpuidle: Default to ladder governor on ticking systems
  time: nohz: Expose tick_nohz_enabled
  ACPICA: Update version to 20160108
  ACPICA: Silence a -Wbad-function-cast warning when acpi_uintptr_t is 'uintptr_t'
  ACPICA: Additional 2016 copyright changes
  ACPICA: Reduce regression fix divergence from upstream ACPICA
  ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830
  ACPI / video: Revert "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()"
  ACPI / video: Document acpi_video_handles_brightness_key_presses() a bit
  ACPI / video: Fix using an uninitialized mutex / list_head in acpi_video_handles_brightness_key_presses()
  ACPI / video: Revert "ACPI / video: driver must be registered before checking for keypresses"
  ACPI / fan: Improve acpi_device_update_power error message
  ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700
  cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0
  MAINTAINERS: Add devfreq-event entry
  MAINTAINERS: Add missing git repository and directory for devfreq
  ...

Merge tag 'renesas-sh-drivers-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

Pull SH driver updates from Simon Horman:
 "Clean up the clock API on legacy SH to make it more similar to the
  Common Clock Framework.  This will avoid different behaviour in
  drivers shared between legacy and CCF-based platforms (e.g.  SCIF)"

* tag 'renesas-sh-drivers-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  drivers: sh: clk: Avoid crashes when passing NULL clocks
  drivers: sh: clk: Remove obsolete and unused clk_round_parent()

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.  Some for SoC-family code under
  drivers/soc, but also some other driver updates that don't belong
  anywhere else.  We also bring in the drivers/reset code through
  arm-soc.

  Some of the larger updates:

   - Qualcomm support for SMEM, SMSM, SMP2P.  All used to communicate
     with other parts of the chip/board on these platforms, all
     proprietary protocols that don't fit into other subsystems and live
     in drivers/soc for now.

   - System bus driver for UniPhier

   - Driver for the TI Wakeup M3 IPC device

   - Power management for Raspberry PI

  + Again a bunch of other smaller updates and patches"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  bus: uniphier: allow only built-in driver
  ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency
  MAINTAINERS: Drop Kumar Gala from QCOM
  bus: uniphier-system-bus: add UniPhier System Bus driver
  ARM: bcm2835: add rpi power domain driver
  dt-bindings: add rpi power domain driver bindings
  ARM: bcm2835: Define two new packets from the latest firmware.
  drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular
  soc: mediatek: SCPSYS: Add regulator support
  MAINTAINERS: Change QCOM entries
  soc: qcom: smd-rpm: Add existing platform support
  memory/tegra: Add number of TLB lines for Tegra124
  reset: hi6220: fix modular build
  soc: qcom: Introduce WCNSS_CTRL SMD client
  ARM: qcom: select ARM_CPU_SUSPEND for power management
  MAINTAINERS: Add rules for Qualcomm dts files
  soc: qcom: enable smsm/smp2p modular build
  serial: msm_serial: Make config tristate
  soc: qcom: smp2p: Qualcomm Shared Memory Point to Point
  soc: qcom: smsm: Add driver for Qualcomm SMSM
  ...

Pull ARM 64-bit defconfig updates from Olof Johansson:
 "As mentioned earlier, we usually bake this into the general "arm64"
  branch, but this release we have partitioned up the updates a bit
  more.

  Most of these updates are enabling new SoCs in the single defconfig
  for 64-bit, Renesas R8A7795, a number of Tegra options, Socionext
  Uniphier and a handful of new options for other platforms as well"

* tag 'armsoc-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: mediatek: enable MTK_TIMER
  arm64: defconfig: add CS2000 support
  arm64: defconfig: Add Renesas R-Car SATA driver for R-Car Gen3 SoCs
  arm64: defconfig: enable UniPhier SoCs support
  arm64: add Kconfig entry for Socionext UniPhier SoC family
  arm64: defconfig: add Renesas sound and AK4613 support
  arm64: defconfig: add Renesas R-Car DMAC driver support
  arm64: defconfig: Enable Renesas R-Car I2C Controller
  arm64: defconfig: enable EthernetAVB
  arm64: defconfig: Enable GPIO of Renesas R-Car Gen3 SoC
  arm64: berlin: add the pinctrl dependency for Marvell Berlin SoCs
  arm64: defconfig: renesas: Enable Renesas r8a7795 SoC
  arm64: defconfig: Enable printk timestamps
  arm64: defconfig: Enable squashfs support
  arm64: defconfig: Enable sdhci-tegra driver
  arm64: defconfig: Enable serial-tegra driver
  arm64: defconfig: Enable tegra-apbdma driver
  arm64: defconfig: Do not disable Tegra AHB driver
  arm64: defconfig: Enable Tegra210 support

Pull ARM SoC defconfig updates from Olof Johansson:
 "As usual, a bunch of commits, mostly adding drivers and other options
  to defconfigs because it makes sense to have them enabled on various
  development or product boards.  Too much to enumerate each here.

  There's an introduction of a pxa_defconfig, since PXA finally will
  allow building a shared kernel for all boards.  With this, we can
  hopefully remove a bunch of individual defconfigs down the road but it
  requires a bit of real life testing and transition period"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits)
  ARM: Add CONFIG_DEPRECATED_PARAM_STRUCT to netwinder_defconfig
  ARM: multi_v7_defconfig: Add rockchip audio support
  arm: multi_v7_defconfig: Add virtio drivers
  ARM: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
  ARM: versatile: enable the right LEDs
  ARM: pxa: add defconfig covering all the boards
  ARM: versatile: select some defaults in defconfig
  ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3
  ARM: bcm2835: enable auxiliary spi driver in defconfig
  ARM: bcm2835: enable all bcm2835-relevant in defconfig
  ARM: default to multi_v7_defconfig
  ARM: multi_v7_defconfig: enable rk808 clkout module
  ARM: multi_v7_defconfig: enable rockchip crypto module
  ARM: multi_v7_defconfig: enable Rockchip io-domain driver
  ARM: multi_v7_defconfig: Enable generic SoC internal OMAP regulators
  ARM: multi_v7_defconfig: Enable AM437x PMIC TPS65218
  ARM: multi_v7_defconfig: enable TPS65217 regulator
  ARM: realview: select apropriate targets
  ARM: defconfig: qcom: Enable SSBI drivers
  ARM: defconfig: Update qcom_defconfig
  ...

Pull ARM 64-bit DT updates from Olof Johansson:
 "This is the first release where we split up the 64-bit contributions a
  bit more, and in particular we are having a separate DT branch for
  them.

  Contents:

   - New devices added to Broadcom NorthStar2
   - Misc fixes for Exynos7 boards
   - QCOM updates for MSM8916
   - Rockchip tweaks for rk3368 SoC and eval board
   - A series of fixes for APM X-Gene v1 and v2
   - Renesas R8A7795 CPU/PSCI additions
   - Marvell Berlin4CT PSCI, cpuidle, watchdog portions
   - Freescale LS1043a SoC and dev board support

  + some treewide or other misc changes"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
  dts/ls2080a: Update DTSI to add support of SP805 WDT
  Documentation: DT: Add entry for ARM SP805-WDT
  arm64: dts: X-Gene v2: I2C1 clock is always on
  arm64: dts: X-Gene v1: I2C0 clock is always on
  arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms
  arm64: dts: hikey: add label properties to UARTs
  arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI
  arm64: dts: apq8016-sbc: enable UART0 on LS connector
  arm64: dts: juno: Add idle-states to device tree
  arm64: dts: Added syscon-reboot node for FSL's LS2080A SoC
  arm64: dts: add LS1043a-RDB board support
  arm64: dts: add Freescale LS1043a SoC support
  Documentation: DT: Add entry for Freescale LS1043a-RDB board
  arm64: dts: uniphier: add PH1-LD10 SoC/board support
  arm64: renesas: r8a7795: fix SATA clock assignment
  arm64: dts: salvator-x: Enable SATA controller
  arm64: dts: r8a7795: Add SATA controller node
  arm64: renesas: r8a7795: add internal delay for i2c IPs
  arm64: renesas: salvator-x: Add board part number to DT bindings
  arm64: dts: r8a7795: Add pmu device nodes
  ...

Pull ARM DT updates from Olof Johansson:
 "As usual, the bulk of this release is again DT file contents.

  There's a huge number of changes here, and it's challenging to give a
  crisp overview of just what is in here.  To start with:

  New boards:

   - TI-based DM3730 from LogicPD (Torpedo)
   - Cosmic+ M4 (nommu) initial support (Freescale Vybrid)
   - Raspberry Pi 2 DT files
   - Watchdog on Meson8b
   - Veyron-mickey (ASUS Chromebit) DTS
   - Rockchip rk3228 SoC and eval board
   - Sigma Designs Tango4

  Improvements:

   - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files
   - Misc new devices for Rockchip rk3036 and rk3288
   - Allwinner updates for misc SoCs and systems

  ... and a _large_ number of other changes across the field.  Devices
  added to SoC DTSI and board DTS files for a number of SoC vendors, new
  product boards on already-supported SoCs, cleanups and refactorings of
  existing DTS/DTSI files and a bunch of other changes"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits)
  ARM: dts: compulab: add new board description
  ARM: versatile: add the syscon LEDs to the DT
  dts: vt8500: Fix errors in SDHC node for WM8505
  ARM: dts: imx6q: clean up unused ipu2grp
  ARM: dts: silk: Add compatible property to "partitions" node
  ARM: dts: gose: Add compatible property to "partitions" node
  ARM: dts: porter: Add compatible property to "partitions" node
  ARM: dts: koelsch: Add compatible property to "partitions" node
  ARM: dts: lager: Add compatible property to "partitions" node
  ARM: dts: bockw: Add compatible property to "partitions" node
  ARM: dts: meson8b: Add watchdog node
  Documentation: watchdog: Add new bindings for meson8b
  ARM: meson: Add status LED for Odroid-C1
  ARM: dts: uniphier: fix a typo in comment block
  ARM: bcm2835: Add the auxiliary clocks to the device tree.
  ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B
  ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.
  ARM: bcm2835: Split the DT for peripherals from the DT for the CPU
  ARM: realview: set up cache correctly on the PB11MPCore
  ARM: dts: Unify G2D device node with other devices on exynos4
  ...