- 26 May, 2011 40 commits
-
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: spi/amba-pl022: work in polling or interrupt mode if pl022_dma_probe fails spi/spi_s3c24xx: Use spi_bitbang_stop instead of spi_unregister_master in s3c24xx_spi_remove spi/spi_nuc900: Use spi_bitbang_stop instead of spi_unregister_master in nuc900_spi_remove spi/spi_tegra: use spi_unregister_master() instead of spi_master_put() spi/spi_sh: use spi_unregister_master instead of spi_master_put in remove path spi: Use void pointers for data in simple SPI I/O operations spi/pl022: use cpu_relax in the busy loop spi/pl022: mark driver non-experimental spi/pl022: timeout on polled transfer v2 spi/dw_spi: improve the interrupt mode with the batch ops spi/dw_spi: change poll mode transfer from byte ops to batch ops spi/dw_spi: remove the un-necessary flush() spi/dw_spi: unify the low level read/write routines
-
Linus Torvalds authored
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits) OMAP3: PM: Boot message is not an error, and not helpful, remove it OMAP3: cpuidle: change the power domains modes determination logic OMAP3: cpuidle: code rework for improved readability OMAP3: cpuidle: re-organize the C-states data OMAP3: clean-up mach specific cpuidle data structures OMAP3 cpuidle: remove useless SDP specific timings usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled usb: otg: OMAP4430: Fixing the omap4430_phy_init function usb: musb: am35x: fix compile error when building am35x usb: musb: OMAP4430: Power down the PHY during board init omap: drop board-igep0030.c omap: igep0020: add support for IGEP3 omap: igep0020: minor refactoring omap: igep0020: name refactoring for future merge with IGEP3 omap: Remove support for omap2evm arm: omap2plus: GPIO cleanup omap: musb: introduce default board config omap: move detection of NAND CS to common-board-devices omap: use common initialization for PMIC i2c bus omap: consolidate touch screen initialization among different boards ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/4xx: Adding PCIe MSI support powerpc: Fix irq_free_virt by adjusting bounds before loop powerpc/irq: Protect irq_radix_revmap_lookup against irq_free_virt powerpc/irq: Check desc in handle_one_irq and expand generic_handle_irq powerpc/irq: Always free duplicate IRQ_LEGACY hosts powerpc/irq: Remove stale and misleading comment powerpc/cell: Rename ipi functions to match current abstractions powerpc/cell: Use common smp ipi actions Remove unused MSG_ flags in linux/smp.h powerpc/pseries: Update MAX_HCALL_OPCODE to reflect page coalescing powerpc/oprofile: Handle events that raise an exception without overflowing powerpc/ftrace: Implement raw syscall tracepoints on PowerPC
-
Linus Torvalds authored
I stupidly broke the case of CONFIG_HUGETLBFS=n when doing the conversion to vm_flags_t in commit ca16d140 ("mm: don't access vm_flags as 'int'"). And my 'allyesconfig' build didn't find it, for obvious reasons.. Include <linux/mm_types.h> in <linux/hugetlb.h>. The problem could have been avoided by just turning the hugetlb_file_setup() error wrapper into a macro, but mm_types.h is a reasonable include in this file. Reported-by: Richard -rw- Weinberger <richard.weinberger@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2Linus Torvalds authored
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (28 commits) Ocfs2: Teach local-mounted ocfs2 to handle unwritten_extents correctly. ocfs2/dlm: Do not migrate resource to a node that is leaving the domain ocfs2/dlm: Add new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG Ocfs2/move_extents: Set several trivial constraints for threshold. Ocfs2/move_extents: Let defrag handle partial extent moving. Ocfs2/move_extents: move/defrag extents within a certain range. Ocfs2/move_extents: helper to calculate the defraging length in one run. Ocfs2/move_extents: move entire/partial extent. Ocfs2/move_extents: helpers to update the group descriptor and global bitmap inode. Ocfs2/move_extents: helper to probe a proper region to move in an alloc group. Ocfs2/move_extents: helper to validate and adjust moving goal. Ocfs2/move_extents: find the victim alloc group, where the given #blk fits. Ocfs2/move_extents: defrag a range of extent. Ocfs2/move_extents: move a range of extent. Ocfs2/move_extents: lock allocators and reserve metadata blocks and data clusters for extents moving. Ocfs2/move_extents: Add basic framework and source files for extent moving. Ocfs2/move_extents: Adding new ioctl code 'OCFS2_IOC_MOVE_EXT' to ocfs2. Ocfs2/refcounttree: Publicize couple of funcs from refcounttree.c Ocfs2: Add a new code 'OCFS2_INFO_FREEFRAG' for o2info ioctl. Ocfs2: Add a new code 'OCFS2_INFO_FREEINODE' for o2info ioctl. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmemLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem: xen: cleancache shim to Xen Transcendent Memory ocfs2: add cleancache support ext4: add cleancache support btrfs: add cleancache support ext3: add cleancache support mm/fs: add hooks to support cleancache mm: cleancache core ops functions and config fs: add field to superblock to support cleancache mm/fs: cleancache documentation Fix up trivial conflict in fs/btrfs/extent_io.c due to includes
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: correctly decrement the extent buffer index in xfs_bmap_del_extent xfs: check for valid indices in xfs_iext_get_ext and xfs_iext_idx_to_irec xfs: fix up asserts in xfs_iflush_fork xfs: do not do pointer arithmetic on extent records xfs: do not use unchecked extent indices in xfs_bunmapi xfs: do not use unchecked extent indices in xfs_bmapi xfs: do not use unchecked extent indices in xfs_bmap_add_extent_* xfs: remove if_lastex xfs: remove the unused XFS_BMAPI_RSVBLOCKS flag xfs: do not discard alloc btree blocks xfs: add online discard support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (61 commits) jbd2: Add MAINTAINERS entry jbd2: fix a potential leak of a journal_head on an error path ext4: teach ext4_ext_split to calculate extents efficiently ext4: Convert ext4 to new truncate calling convention ext4: do not normalize block requests from fallocate() ext4: enable "punch hole" functionality ext4: add "punch hole" flag to ext4_map_blocks() ext4: punch out extents ext4: add new function ext4_block_zero_page_range() ext4: add flag to ext4_has_free_blocks ext4: reserve inodes and feature code for 'quota' feature ext4: add support for multiple mount protection ext4: ensure f_bfree returned by ext4_statfs() is non-negative ext4: protect bb_first_free in ext4_trim_all_free() with group lock ext4: only load buddy bitmap in ext4_trim_fs() when it is needed jbd2: Fix comment to match the code in jbd2__journal_start() ext4: fix waiting and sending of a barrier in ext4_sync_file() jbd2: Add function jbd2_trans_will_send_data_barrier() jbd2: fix sending of data flush on journal commit ext4: fix ext4_ext_fiemap_cb() to handle blocks before request range correctly ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (25 commits) cifs: remove unnecessary dentry_unhash on rmdir/rename_dir ocfs2: remove unnecessary dentry_unhash on rmdir/rename_dir exofs: remove unnecessary dentry_unhash on rmdir/rename_dir nfs: remove unnecessary dentry_unhash on rmdir/rename_dir ext2: remove unnecessary dentry_unhash on rmdir/rename_dir ext3: remove unnecessary dentry_unhash on rmdir/rename_dir ext4: remove unnecessary dentry_unhash on rmdir/rename_dir btrfs: remove unnecessary dentry_unhash in rmdir/rename_dir ceph: remove unnecessary dentry_unhash calls vfs: clean up vfs_rename_other vfs: clean up vfs_rename_dir vfs: clean up vfs_rmdir vfs: fix vfs_rename_dir for FS_RENAME_DOES_D_MOVE filesystems libfs: drop unneeded dentry_unhash vfs: update dentry_unhash() comment vfs: push dentry_unhash on rename_dir into file systems vfs: push dentry_unhash on rmdir into file systems vfs: remove dget() from dentry_unhash() vfs: dentry_unhash immediately prior to rmdir vfs: Block mmapped writes while the fs is frozen ...
-
KOSAKI Motohiro authored
The type of vma->vm_flags is 'unsigned long'. Neither 'int' nor 'unsigned int'. This patch fixes such misuse. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> [ Changed to use a typedef - we'll extend it to cover more cases later, since there has been discussion about making it a 64-bit type.. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Magenheimer authored
This patch provides a shim between the kernel-internal cleancache API (see Documentation/mm/cleancache.txt) and the Xen Transcendent Memory ABI (see http://oss.oracle.com/projects/tmem). Xen tmem provides "hypervisor RAM" as an ephemeral page-oriented pseudo-RAM store for cleancache pages, shared cleancache pages, and frontswap pages. Tmem provides enterprise-quality concurrency, full save/restore and live migration support, compression and deduplication. A presentation showing up to 8% faster performance and up to 52% reduction in sectors read on a kernel compile workload, despite aggressive in-kernel page reclamation ("self-ballooning") can be found at: http://oss.oracle.com/projects/tmem/dist/documentation/presentations/TranscendentMemoryXenSummit2010.pdfSigned-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik Van Riel <riel@redhat.com> Cc: Jan Beulich <JBeulich@novell.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Andreas Dilger <adilger@sun.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org>
-
Dan Magenheimer authored
This eighth patch of eight in this cleancache series "opts-in" cleancache for ocfs2. Clustered filesystems must explicitly enable cleancache by calling cleancache_init_shared_fs anytime an instance of the filesystem is mounted. Ocfs2 is currently the only user of the clustered filesystem interface but nevertheless, the cleancache hooks in the VFS layer are sufficient for ocfs2 including the matching cleancache_flush_fs hook which must be called on unmount. Details and a FAQ can be found in Documentation/vm/cleancache.txt [v8: trivial merge conflict update] [v5: jeremy@goop.org: simplify init hook and any future fs init changes] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik Van Riel <riel@redhat.com> Cc: Jan Beulich <JBeulich@novell.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Andreas Dilger <adilger@sun.com> Cc: Ted Tso <tytso@mit.edu> Cc: Nitin Gupta <ngupta@vflare.org>
-
Dan Magenheimer authored
This seventh patch of eight in this cleancache series "opts-in" cleancache for ext4. Filesystems must explicitly enable cleancache by calling cleancache_init_fs anytime an instance of the filesystem is mounted. For ext4, all other cleancache hooks are in the VFS layer including the matching cleancache_flush_fs hook which must be called on unmount. Details and a FAQ can be found in Documentation/vm/cleancache.txt [v6-v8: no changes] [v5: jeremy@goop.org: simplify init hook and any future fs init changes] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Andreas Dilger <adilger@sun.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik Van Riel <riel@redhat.com> Cc: Jan Beulich <JBeulich@novell.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org>
-
Dan Magenheimer authored
This sixth patch of eight in this cleancache series "opts-in" cleancache for btrfs. Filesystems must explicitly enable cleancache by calling cleancache_init_fs anytime an instance of the filesystem is mounted. Btrfs uses its own readpage which must be hooked, but all other cleancache hooks are in the VFS layer including the matching cleancache_flush_fs hook which must be called on unmount. Details and a FAQ can be found in Documentation/vm/cleancache.txt [v6-v8: no changes] [v5: jeremy@goop.org: simplify init hook and any future fs init changes] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik Van Riel <riel@redhat.com> Cc: Jan Beulich <JBeulich@novell.com> Cc: Andreas Dilger <adilger@sun.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org>
-
Dan Magenheimer authored
This fifth patch of eight in this cleancache series "opts-in" cleancache for ext3. Filesystems must explicitly enable cleancache by calling cleancache_init_fs anytime an instance of the filesystem is mounted. For ext3, all other cleancache hooks are in the VFS layer including the matching cleancache_flush_fs hook which must be called on unmount. Details and a FAQ can be found in Documentation/vm/cleancache.txt [v6-v8: no changes] [v5: jeremy@goop.org: simplify init hook and any future fs init changes] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Andreas Dilger <adilger@sun.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik Van Riel <riel@redhat.com> Cc: Jan Beulich <JBeulich@novell.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org>
-
Dan Magenheimer authored
This fourth patch of eight in this cleancache series provides the core hooks in VFS for: initializing cleancache per filesystem; capturing clean pages reclaimed by page cache; attempting to get pages from cleancache before filesystem read; and ensuring coherency between pagecache, disk, and cleancache. Note that the placement of these hooks was stable from 2.6.18 to 2.6.38; a minor semantic change was required due to a patchset in 2.6.39. All hooks become no-ops if CONFIG_CLEANCACHE is unset, or become a check of a boolean global if CONFIG_CLEANCACHE is set but no cleancache "backend" has claimed cleancache_ops. Details and a FAQ can be found in Documentation/vm/cleancache.txt [v8: minchan.kim@gmail.com: adapt to new remove_from_page_cache function] Signed-off-by: Chris Mason <chris.mason@oracle.com> Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik Van Riel <riel@redhat.com> Cc: Jan Beulich <JBeulich@novell.com> Cc: Andreas Dilger <adilger@sun.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org>
-
Dan Magenheimer authored
This third patch of eight in this cleancache series provides the core code for cleancache that interfaces between the hooks in VFS and individual filesystems and a cleancache backend. It also includes build and config patches. Two new files are added: mm/cleancache.c and include/linux/cleancache.h. Note that CONFIG_CLEANCACHE can default to on; in systems that do not provide a cleancache backend, all hooks devolve to a simple check of a global enable flag, so performance impact should be negligible but can be reduced to zero impact if config'ed off. However for this first commit, it defaults to off. Details and a FAQ can be found in Documentation/vm/cleancache.txt Credits: Cleancache_ops design derived from Jeremy Fitzhardinge design for tmem [v8: dan.magenheimer@oracle.com: fix exportfs call affecting btrfs] [v8: akpm@linux-foundation.org: use static inline function, not macro] [v7: dan.magenheimer@oracle.com: cleanup sysfs and remove cleancache prefix] [v6: JBeulich@novell.com: robustly handle buggy fs encode_fh actor definition] [v5: jeremy@goop.org: clean up global usage and static var names] [v5: jeremy@goop.org: simplify init hook and any future fs init changes] [v5: hch@infradead.org: cleaner non-global interface for ops registration] [v4: adilger@sun.com: interface must support exportfs FS's] [v4: hch@infradead.org: interface must support 64-bit FS on 32-bit kernel] [v3: akpm@linux-foundation.org: use one ops struct to avoid pointer hops] [v3: akpm@linux-foundation.org: document and ensure PageLocked reqts are met] [v3: ngupta@vflare.org: fix success/fail codes, change funcs to void] [v2: viro@ZenIV.linux.org.uk: use sane types] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Nitin Gupta <ngupta@vflare.org> Acked-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Andreas Dilger <adilger@sun.com> Acked-by: Jan Beulich <JBeulich@novell.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik Van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com>
-
Dan Magenheimer authored
This second patch of eight in this cleancache series adds a field to the generic superblock to squirrel away a pool identifier that is dynamically provided by cleancache-enabled filesystems at mount time to uniquely identify files and pages belonging to this mounted filesystem. Details and a FAQ can be found in Documentation/vm/cleancache.txt [v8: trivial merge conflict update] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik Van Riel <riel@redhat.com> Cc: Jan Beulich <JBeulich@novell.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Andreas Dilger <adilger@sun.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org>
-
Dan Magenheimer authored
This patchset introduces cleancache, an optional new feature exposed by the VFS layer that potentially dramatically increases page cache effectiveness for many workloads in many environments at a negligible cost. It does this by providing an interface to transcendent memory, which is memory/storage that is not otherwise visible to and/or directly addressable by the kernel. Instead of being discarded, hooks in the reclaim code "put" clean pages to cleancache. Filesystems that "opt-in" may "get" pages from cleancache that were previously put, but pages in cleancache are "ephemeral", meaning they may disappear at any time. And the size of cleancache is entirely dynamic and unknowable to the kernel. Filesystems currently supported by this patchset include ext3, ext4, btrfs, and ocfs2. Other filesystems (especially those built entirely on VFS) should be easy to add, but should first be thoroughly tested to ensure coherency. Details and a FAQ are provided in Documentation/vm/cleancache.txt This first patch of eight in this cleancache series only adds two new documentation files. [v8: minor documentation changes by author] [v3: akpm@linux-foundation.org: document sysfs API] [v3: hch@infradead.org: move detailed description to Documentation/vm] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik Van Riel <riel@redhat.com> Cc: Jan Beulich <JBeulich@novell.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Andreas Dilger <adilger@sun.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org>
-
Theodore Ts'o authored
Create a separate MAINTAINERS entry for jbd2 Cc: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
Sage Weil authored
Cifs has no problems with lingering references to unlinked directory inodes. CC: Steve French <sfrench@samba.org> CC: linux-cifs@vger.kernel.org Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
Ocfs2 has no issues with lingering references to unlinked directory inodes. CC: Mark Fasheh <mfasheh@suse.com> CC: ocfs2-devel@oss.oracle.com Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
Exofs has no problems with lingering references to unlinked directory inodes. CC: Benny Halevy <bhalevy@panasas.com> CC: osd-dev@open-osd.org Acked-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
NFS has no problems with lingering references to unlinked directory inodes. CC: Trond Myklebust <Trond.Myklebust@netapp.com> CC: linux-nfs@vger.kernel.org Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
ext2 has no problems with lingering references to unlinked directory inodes. CC: Jan Kara <jack@suse.cz> CC: linux-ext4@vger.kernel.org Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
ext3 has no problems with lingering references to unlinked directory inodes. CC: Jan Kara <jack@suse.cz> CC: Andrew Morton <akpm@linux-foundation.org> CC: Andreas Dilger <adilger.kernel@dilger.ca> CC: linux-ext4@vger.kernel.org Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
ext4 has no problems with lingering references to unlinked directory inodes. CC: "Theodore Ts'o" <tytso@mit.edu> CC: Andreas Dilger <adilger.kernel@dilger.ca> CC: linux-ext4@vger.kernel.org Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
Btrfs has no problems with lingering references to unlinked directory inodes. CC: Chris Mason <chris.mason@oracle.com> CC: linux-btrfs@vger.kernel.org Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
Ceph does not need these, and they screw up our use of the dcache as a consistent cache. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
Simplify control flow to match vfs_rename_dir. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
Simplify control flow through vfs_rename_dir. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
Simplify the control flow with an out label. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Miklos Szeredi authored
vfs_rename_dir() doesn't properly account for filesystems with FS_RENAME_DOES_D_MOVE. If new_dentry has a target inode attached, it unhashes the new_dentry prior to the rename() iop and rehashes it after, but doesn't account for the possibility that rename() may have swapped {old,new}_dentry. For FS_RENAME_DOES_D_MOVE filesystems, it rehashes new_dentry (now the old renamed-from name, which d_move() expected to go away), such that a subsequent lookup will find it. Currently all FS_RENAME_DOES_D_MOVE filesystems compensate for this by failing in d_revalidate. The bug was introduced by: commit 349457cc "[PATCH] Allow file systems to manually d_move() inside of ->rename()" Fix by not rehashing the new dentry. Rehashing used to be needed by d_move() but isn't anymore. Reported-by: Sage Weil <sage@newdream.net> Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
There are no libfs issues with dangling references to empty directories. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
The helper is now only called by file systems, not the VFS. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
Only a few file systems need this. Start by pushing it down into each rename method (except gfs2 and xfs) so that it can be dealt with on a per-fs basis. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
Only a few file systems need this. Start by pushing it down into each fs rmdir method (except gfs2 and xfs) so it can be dealt with on a per-fs basis. This does not change behavior for any in-tree file systems. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
This serves no useful purpose that I can discern. All callers (rename, rmdir) hold their own reference to the dentry. A quick audit of all file systems showed no relevant checks on the value of d_count in vfs_rmdir/vfs_rename_dir paths. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Sage Weil authored
This presumes that there is no reason to unhash a dentry if we fail because it is a mountpoint or the LSM check fails, and that the LSM checks do not depend on the dentry being unhashed. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Jan Kara authored
We should not allow file modification via mmap while the filesystem is frozen. So block in block_page_mkwrite() while the filesystem is frozen. We cannot do the blocking wait in __block_page_mkwrite() since e.g. ext4 will want to call that function with transaction started in some cases and that would deadlock. But we can at least do the non-blocking reliable check in __block_page_mkwrite() which is the hardest part anyway. We have to check for frozen filesystem with the page marked dirty and under page lock with which we then return from ->page_mkwrite(). Only that way we cannot race with writeback done by freezing code - either we mark the page dirty after the writeback has started, see freezing in progress and block, or writeback will wait for our page lock which is released only when the fault is done and then writeback will writeout and writeprotect the page again. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-