This is the only use of kerneldoc in the source file and no descriptions
are provided.

Also demote standard comment.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_svc.c:3847: warning: Function parameter or member 'bfa' not described in 'bfa_fcport_get_cfg_topology'

Link: https://lore.kernel.org/r/20200723122446.1329773-36-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This is the only use of kerneldoc in the source file and no
descriptions are provided.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_core.c:1245: warning: Function parameter or member 'bfa' not described in 'bfa_iocfc_qreg'
 drivers/scsi/bfa/bfa_core.c:1245: warning: Function parameter or member 'qreg' not described in 'bfa_iocfc_qreg'

Link: https://lore.kernel.org/r/20200723122446.1329773-35-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This is probably historical (Doxygen?).

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_ioc.c:6646: warning: Cannot understand  * @brief hardware error definition
 drivers/scsi/bfa/bfa_ioc.c:6661: warning: Cannot understand  * @brief flash command register data structure
 drivers/scsi/bfa/bfa_ioc.c:6685: warning: Cannot understand  * @brief flash device status register data structure
 drivers/scsi/bfa/bfa_ioc.c:6711: warning: Cannot understand  * @brief flash address register data structure
 drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'pci_bar' not described in 'bfa_flash_set_cmd'
 drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'wr_cnt' not described in 'bfa_flash_set_cmd'
 drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'rd_cnt' not described in 'bfa_flash_set_cmd'
 drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'ad_cnt' not described in 'bfa_flash_set_cmd'
 drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'op' not described in 'bfa_flash_set_cmd'
 drivers/scsi/bfa/bfa_ioc.c:6768: warning: Cannot understand  * @brief
 drivers/scsi/bfa/bfa_ioc.c:6807: warning: Cannot understand  * @brief
 drivers/scsi/bfa/bfa_ioc.c:6852: warning: Cannot understand  * @brief
 drivers/scsi/bfa/bfa_ioc.c:6898: warning: Cannot understand  * @brief
 drivers/scsi/bfa/bfa_ioc.c:6914: warning: Cannot understand  * @brief
 drivers/scsi/bfa/bfa_ioc.c:6940: warning: Cannot understand  * @brief

Link: https://lore.kernel.org/r/20200723122446.1329773-34-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In certain configurations esas2r_bugon() is sometimes NULLed by the compiler.

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/scsi/esas2r/esas2r_log.c:44:
 drivers/scsi/esas2r/esas2r.h: In function ‘esas2r_rq_init_request’:
 drivers/scsi/esas2r/esas2r.h:1229:17: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
 1229 | esas2r_bugon();
 | ^
 NB: Lots of these - snipped for brevity

Link: https://lore.kernel.org/r/20200723122446.1329773-33-lee.jones@linaro.org
Cc: Bradley Grove <linuxdrivers@attotech.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qedi/qedi_fw.c: In function ‘qedi_put_rq_bdq_buf’:
 drivers/scsi/qedi/qedi_fw.c:355:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200723122446.1329773-32-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/be2iscsi/be_iscsi.c:1042: warning: Function parameter or member 'ep' not described in 'beiscsi_open_conn'
 drivers/scsi/be2iscsi/be_iscsi.c:1042: warning: Excess function parameter 'beiscsi_ep' description in 'beiscsi_open_conn'

Link: https://lore.kernel.org/r/20200723122446.1329773-31-lee.jones@linaro.org
Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com>
Cc: Ketan Mukadam <ketan.mukadam@broadcom.com>
Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Cc: linux-drivers@broadcom.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bnx2i/bnx2i_iscsi.c:241: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_bind_conn_to_iscsi_cid'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:241: warning: Excess function parameter 'conn' description in 'bnx2i_bind_conn_to_iscsi_cid'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:470: warning: Excess function parameter 'cmd' description in 'bnx2i_destroy_cmd_pool'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Function parameter or member 'cls_session' not described in 'bnx2i_drop_session'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Excess function parameter 'hba' description in 'bnx2i_drop_session'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Excess function parameter 'session' description in 'bnx2i_drop_session'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:1290: warning: Function parameter or member 'ep' not described in 'bnx2i_session_create'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:1979: warning: Function parameter or member 'bnx2i_ep' not described in 'bnx2i_ep_tcp_conn_active'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:1979: warning: Excess function parameter 'ep' description in 'bnx2i_ep_tcp_conn_active'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Function parameter or member 'shost' not described in 'bnx2i_nl_set_path'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Function parameter or member 'params' not described in 'bnx2i_nl_set_path'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Excess function parameter 'buf' description in 'bnx2i_nl_set_path'

Link: https://lore.kernel.org/r/20200723122446.1329773-30-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Mainly renames and docrot issues.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bnx2i/bnx2i_hwi.c:194: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_get_rq_buf'
 drivers/scsi/bnx2i/bnx2i_hwi.c:194: warning: Excess function parameter 'conn' description in 'bnx2i_get_rq_buf'
 drivers/scsi/bnx2i/bnx2i_hwi.c:232: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_put_rq_buf'
 drivers/scsi/bnx2i/bnx2i_hwi.c:232: warning: Excess function parameter 'conn' description in 'bnx2i_put_rq_buf'
 drivers/scsi/bnx2i/bnx2i_hwi.c:269: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_ring_sq_dbell'
 drivers/scsi/bnx2i/bnx2i_hwi.c:269: warning: Excess function parameter 'conn' description in 'bnx2i_ring_sq_dbell'
 drivers/scsi/bnx2i/bnx2i_hwi.c:293: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_ring_dbell_update_sq_params'
 drivers/scsi/bnx2i/bnx2i_hwi.c:293: warning: Excess function parameter 'conn' description in 'bnx2i_ring_dbell_update_sq_params'
 drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_login'
 drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_login'
 drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_login'
 drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_login'
 drivers/scsi/bnx2i/bnx2i_hwi.c:384: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_tmf'
 drivers/scsi/bnx2i/bnx2i_hwi.c:384: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_tmf'
 drivers/scsi/bnx2i/bnx2i_hwi.c:458: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_text'
 drivers/scsi/bnx2i/bnx2i_hwi.c:458: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_text'
 drivers/scsi/bnx2i/bnx2i_hwi.c:506: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_scsicmd'
 drivers/scsi/bnx2i/bnx2i_hwi.c:506: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_scsicmd'
 drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_nopout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_nopout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_nopout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_nopout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_logout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_logout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_logout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_logout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:686: warning: Function parameter or member 't' not described in 'bnx2i_ep_ofld_timer'
 drivers/scsi/bnx2i/bnx2i_hwi.c:686: warning: Excess function parameter 'data' description in 'bnx2i_ep_ofld_timer'
 drivers/scsi/bnx2i/bnx2i_hwi.c:1672: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_unsol_pdu_adjust_rq'
 drivers/scsi/bnx2i/bnx2i_hwi.c:1672: warning: Excess function parameter 'conn' description in 'bnx2i_unsol_pdu_adjust_rq'
 drivers/scsi/bnx2i/bnx2i_hwi.c:1900: warning: Function parameter or member 'session' not described in 'bnx2i_queue_scsi_cmd_resp'
 drivers/scsi/bnx2i/bnx2i_hwi.c:1900: warning: Function parameter or member 'cqe' not described in 'bnx2i_queue_scsi_cmd_resp'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'context' not described in 'bnx2i_indicate_kcqe'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'kcqe' not described in 'bnx2i_indicate_kcqe'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'num_cqe' not described in 'bnx2i_indicate_kcqe'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Excess function parameter 'hba' description in 'bnx2i_indicate_kcqe'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_indicate_kcqe'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Function parameter or member 'cm_sk' not described in 'bnx2i_cm_remote_close'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Excess function parameter 'hba' description in 'bnx2i_cm_remote_close'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_cm_remote_close'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Function parameter or member 'cm_sk' not described in 'bnx2i_cm_remote_abort'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Excess function parameter 'hba' description in 'bnx2i_cm_remote_abort'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_cm_remote_abort'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2677: warning: cannot understand function prototype: 'struct cnic_ulp_ops bnx2i_cnic_cb = '

Link: https://lore.kernel.org/r/20200723122446.1329773-29-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_fcs_rport.c: In function ‘bfa_fcs_rport_process_adisc’:
 drivers/scsi/bfa/bfa_fcs_rport.c:2243:21: warning: variable ‘adisc’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200723122446.1329773-28-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_ioc_ct.c:504: warning: Function parameter or member 'ioc' not described in 'bfa_ioc_set_ctx_hwif'
 drivers/scsi/bfa/bfa_ioc_ct.c:504: warning: Function parameter or member 'hwif' not described in 'bfa_ioc_set_ctx_hwif'
 drivers/scsi/bfa/bfa_ioc_ct.c:525: warning: Function parameter or member 'ioc' not described in 'bfa_ioc_set_ct_hwif'
 drivers/scsi/bfa/bfa_ioc_ct.c:540: warning: Function parameter or member 'ioc' not described in 'bfa_ioc_set_ct2_hwif'

Link: https://lore.kernel.org/r/20200723122446.1329773-26-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/csiostor/csio_rnode.c:869: warning: Function parameter or member 'fwevt' not described in 'csio_rnode_fwevt_handler'

Link: https://lore.kernel.org/r/20200723122446.1329773-25-lee.jones@linaro.orgSigned-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_ioc.c:5023:1: warning: no previous prototype for ‘bfa_diag_intr’ [-Wmissing-prototypes]
 5023 | bfa_diag_intr(void *diagarg, struct bfi_mbmsg_s *msg)
 | ^~~~~~~~~~~~~
 drivers/scsi/bfa/bfa_ioc.c:6966:1: warning: no previous prototype for ‘bfa_flash_sem_get’ [-Wmissing-prototypes]
 6966 | bfa_flash_sem_get(void __iomem *bar)
 | ^~~~~~~~~~~~~~~~~
 drivers/scsi/bfa/bfa_ioc.c:6979:1: warning: no previous prototype for ‘bfa_flash_sem_put’ [-Wmissing-prototypes]
 6979 | bfa_flash_sem_put(void __iomem *bar)
 | ^~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200723122446.1329773-24-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/csiostor/csio_hw_t5.c: In function ‘csio_t5_mc_read’:
 drivers/scsi/csiostor/csio_hw_t5.c:151:11: warning: variable ‘mc_bist_status_rdata_reg’ set but not used [-Wunused-but-set-variable]
 151 | uint32_t mc_bist_status_rdata_reg, mc_bist_data_pattern_reg;
 | ^~~~~~~~~~~~~~~~~~~~~~~~
 drivers/scsi/csiostor/csio_hw_t5.c: In function ‘csio_t5_edc_read’:
 drivers/scsi/csiostor/csio_hw_t5.c:199:38: warning: variable ‘edc_bist_status_rdata_reg’ set but not used [-Wunused-but-set-variable]
 199 | uint32_t edc_bist_cmd_data_pattern, edc_bist_status_rdata_reg;
 | ^~~~~~~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200723122446.1329773-23-lee.jones@linaro.orgSigned-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/csiostor/csio_hw.c: In function ‘csio_hw_get_vpd_params’:
 drivers/scsi/csiostor/csio_hw.c:309:8: warning: variable ‘s’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200723122446.1329773-22-lee.jones@linaro.org
Cc: Arkadiusz Drabczyk <arkadiusz@drabczyk.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_iocpf_sm_fwcheck_entry’:
 drivers/scsi/bfa/bfa_ioc.c:704:27: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_ioc_fwver_get’:
 drivers/scsi/bfa/bfa_ioc.c:1443:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_ioc_fwsig_invalidate’:
 drivers/scsi/bfa/bfa_ioc.c:1665:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_ioc_download_fw’:
 drivers/scsi/bfa/bfa_ioc.c:1866:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_diag_memtest_done’:
 drivers/scsi/bfa/bfa_ioc.c:4766:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_flash_fifo_flush’:
 drivers/scsi/bfa/bfa_ioc.c:6787:6: warning: variable ‘t’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200723122446.1329773-21-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_nportdisc.c:1079: warning: Function parameter or member 'ndlp' not described in 'lpfc_release_rpi'

Link: https://lore.kernel.org/r/20200723122446.1329773-20-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Adding, removing and correcting function parameter descriptions.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Function parameter or member 'vport' not described in 'lpfc_reg_vpi'
 drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Excess function parameter 'phba' description in 'lpfc_reg_vpi'
 drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Excess function parameter 'vpi' description in 'lpfc_reg_vpi'
 drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Excess function parameter 'sid' description in 'lpfc_reg_vpi'
 drivers/scsi/lpfc/lpfc_mbox.c:1218: warning: Function parameter or member 'ring' not described in 'lpfc_config_ring'
 drivers/scsi/lpfc/lpfc_mbox.c:1626: warning: Function parameter or member 'mboxq' not described in 'lpfc_mbox_tmo_val'
 drivers/scsi/lpfc/lpfc_mbox.c:1626: warning: Excess function parameter 'cmd' description in 'lpfc_mbox_tmo_val'
 drivers/scsi/lpfc/lpfc_mbox.c:1710: warning: Function parameter or member 'sge' not described in 'lpfc_sli4_mbx_sge_get'
 drivers/scsi/lpfc/lpfc_mbox.c:1780: warning: Function parameter or member 'emb' not described in 'lpfc_sli4_config'
 drivers/scsi/lpfc/lpfc_mbox.c:2027: warning: Function parameter or member 'mboxq' not described in 'lpfc_sli4_mbx_read_fcf_rec'
 drivers/scsi/lpfc/lpfc_mbox.c:2078: warning: Function parameter or member 'phba' not described in 'lpfc_request_features'

Link: https://lore.kernel.org/r/20200723122446.1329773-19-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_bsg.c:811: warning: Function parameter or member 'bsg_job' not described in 'qla4xxx_process_vendor_specific'
 drivers/scsi/qla4xxx/ql4_bsg.c:811: warning: Excess function parameter 'job' description in 'qla4xxx_process_vendor_specific'
 drivers/scsi/qla4xxx/ql4_bsg.c:858: warning: Function parameter or member 'bsg_job' not described in 'qla4xxx_bsg_request'
 drivers/scsi/qla4xxx/ql4_bsg.c:858: warning: Excess function parameter 'job' description in 'qla4xxx_bsg_request'

Link: https://lore.kernel.org/r/20200723122446.1329773-18-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_init.c:1136: warning: Function parameter or member 't' not described in 'lpfc_hb_timeout'
 drivers/scsi/lpfc/lpfc_init.c:1136: warning: Excess function parameter 'ptr' description in 'lpfc_hb_timeout'
 drivers/scsi/lpfc/lpfc_init.c:1170: warning: Function parameter or member 't' not described in 'lpfc_rrq_timeout'
 drivers/scsi/lpfc/lpfc_init.c:1170: warning: Excess function parameter 'ptr' description in 'lpfc_rrq_timeout'
 drivers/scsi/lpfc/lpfc_init.c:1232: warning: Function parameter or member 'work' not described in 'lpfc_idle_stat_delay_work'
 drivers/scsi/lpfc/lpfc_init.c:1817: warning: Function parameter or member 'en_rn_msg' not described in 'lpfc_sli4_port_sta_fn_reset'
 drivers/scsi/lpfc/lpfc_init.c:3033: warning: Function parameter or member 'mbx_action' not described in 'lpfc_block_mgmt_io'
 drivers/scsi/lpfc/lpfc_init.c:3481: warning: Function parameter or member 'mbx_action' not described in 'lpfc_offline_prep'
 drivers/scsi/lpfc/lpfc_init.c:4150: warning: Function parameter or member 'phba' not described in 'lpfc_new_io_buf'
 drivers/scsi/lpfc/lpfc_init.c:4150: warning: Function parameter or member 'num_to_alloc' not described in 'lpfc_new_io_buf'
 drivers/scsi/lpfc/lpfc_init.c:4150: warning: Excess function parameter 'vport' description in 'lpfc_new_io_buf'
 drivers/scsi/lpfc/lpfc_init.c:4150: warning: Excess function parameter 'num_to_allocate' description in 'lpfc_new_io_buf'
 drivers/scsi/lpfc/lpfc_init.c:4736: warning: Function parameter or member 't' not described in 'lpfc_sli4_fcf_redisc_wait_tmo'
 drivers/scsi/lpfc/lpfc_init.c:4736: warning: Excess function parameter 'ptr' description in 'lpfc_sli4_fcf_redisc_wait_tmo'
 drivers/scsi/lpfc/lpfc_init.c:5103: warning: Excess function parameter 'evt_code' description in 'lpfc_async_link_speed_to_read_top'
 drivers/scsi/lpfc/lpfc_init.c:5377: warning: Function parameter or member 'acqe_sli' not described in 'lpfc_sli4_async_sli_evt'
 drivers/scsi/lpfc/lpfc_init.c:5377: warning: Excess function parameter 'acqe_fc' description in 'lpfc_sli4_async_sli_evt'
 drivers/scsi/lpfc/lpfc_init.c:5634: warning: Function parameter or member 'phba' not described in 'lpfc_sli4_perform_all_vport_cvl'
 drivers/scsi/lpfc/lpfc_init.c:5634: warning: Excess function parameter 'vport' description in 'lpfc_sli4_perform_all_vport_cvl'
 drivers/scsi/lpfc/lpfc_init.c:5655: warning: Function parameter or member 'acqe_fip' not described in 'lpfc_sli4_async_fip_evt'
 drivers/scsi/lpfc/lpfc_init.c:5655: warning: Excess function parameter 'acqe_link' description in 'lpfc_sli4_async_fip_evt'
 drivers/scsi/lpfc/lpfc_init.c:5908: warning: Function parameter or member 'acqe_dcbx' not described in 'lpfc_sli4_async_dcbx_evt'
 drivers/scsi/lpfc/lpfc_init.c:5908: warning: Excess function parameter 'acqe_link' description in 'lpfc_sli4_async_dcbx_evt'
 drivers/scsi/lpfc/lpfc_init.c:5927: warning: Function parameter or member 'acqe_grp5' not described in 'lpfc_sli4_async_grp5_evt'
 drivers/scsi/lpfc/lpfc_init.c:5927: warning: Excess function parameter 'acqe_link' description in 'lpfc_sli4_async_grp5_evt'
 drivers/scsi/lpfc/lpfc_init.c:7279: warning: Function parameter or member 'iocb_count' not described in 'lpfc_init_iocb_list'
 drivers/scsi/lpfc/lpfc_init.c:8227: warning: Function parameter or member 'if_type' not described in 'lpfc_sli4_bar1_register_memmap'
 drivers/scsi/lpfc/lpfc_init.c:8414: warning: Excess function parameter 'phba' description in 'LINK_FLAGS_DEF'
 drivers/scsi/lpfc/lpfc_init.c:8414: warning: Excess function parameter 'rdconf' description in 'LINK_FLAGS_DEF'
 drivers/scsi/lpfc/lpfc_init.c:10734: warning: Function parameter or member 'cfg_mode' not described in 'lpfc_sli_enable_intr'
 drivers/scsi/lpfc/lpfc_init.c:11241: warning: Function parameter or member 'eqlist' not described in 'lpfc_cpuhp_get_eq'
 drivers/scsi/lpfc/lpfc_init.c:11726: warning: Function parameter or member 'cfg_mode' not described in 'lpfc_sli4_enable_intr'
 drivers/scsi/lpfc/lpfc_init.c:12997: warning: Excess function parameter 'ret' description in 'lpfc_write_firmware'
 drivers/scsi/lpfc/lpfc_init.c:13103: warning: Function parameter or member 'fw_upgrade' not described in 'lpfc_sli4_request_firmware_update'

Link: https://lore.kernel.org/r/20200723122446.1329773-17-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_init.c: In function ‘lpfc_dbg_print’:
 drivers/scsi/lpfc/lpfc_init.c:14212:6: warning: function ‘lpfc_dbg_print’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
 14212 | sizeof(phba->dbg_log[idx].log), fmt, args);
 | ^~~~~~

Link: https://lore.kernel.org/r/20200723122446.1329773-16-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_83xx.c: In function ‘qla4_83xx_dump_pause_control_regs’:
 drivers/scsi/qla4xxx/ql4_83xx.c:1409:9: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
 1409 | int i, status = QLA_SUCCESS;
 | ^~~~~~

Link: https://lore.kernel.org/r/20200723122446.1329773-15-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 In file included from arch/arm/include/asm/io.h:23,
 from drivers/scsi/ips.c:164:
 In function ‘strncpy’,
 inlined from ‘ips_send_cmd’ at drivers/scsi/ips.c:3522:6:
 include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output
 truncated before terminating nul cop ying 4 bytes from a string of the same length [-Wstringop-truncation]
 297 | #define __underlying_strncpy __builtin_strncpy
 | ^
 include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
 307 | return __underlying_strncpy(p, q, size);
 | ^~~~~~~~~~~~~~~~~~~~
 NB: Lots of these - snipping for brevity

Link: https://lore.kernel.org/r/20200723122446.1329773-14-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: ipslinux@adaptec.com
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Intentionally keeping all register reads/writes.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/ips.c: In function ‘ips_init_copperhead’:
 drivers/scsi/ips.c:4700:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable]
 4700 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES];
 | ^~~~~~~~~~
 drivers/scsi/ips.c: In function ‘ips_init_copperhead_memio’:
 drivers/scsi/ips.c:4794:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable]
 4794 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES];
 | ^~~~~~~~~~
 drivers/scsi/ips.c: In function ‘ips_init_phase1’:
 drivers/scsi/ips.c:6839:10: warning: variable ‘func’ set but not used [-Wunused-but-set-variable]
 6839 | uint8_t func;
 | ^~~~
 drivers/scsi/ips.c:6838:10: warning: variable ‘bus’ set but not used [-Wunused-but-set-variable]
 6838 | uint8_t bus;
 | ^~~

Link: https://lore.kernel.org/r/20200723122446.1329773-13-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: ipslinux@adaptec.com
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qedi/qedi_main.c: In function ‘qedi_queue_cqe’:
 drivers/scsi/qedi/qedi_main.c:1158:21: warning: variable ‘conn’ set but not used [-Wunused-but-set-variable]
 1158 | struct iscsi_conn *conn;
 | ^~~~
 drivers/scsi/qedi/qedi_main.c: In function ‘__qedi_probe’:
 drivers/scsi/qedi/qedi_main.c:2432:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
 2432 | u16 tmp;
 | ^~~

Link: https://lore.kernel.org/r/20200723122446.1329773-12-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This is the only use of kerneldoc in the source file and no descriptions
are provided.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_fcpim.c:3829: warning: Function parameter or member 'bfa' not described in 'bfa_fcpim_get_throttle_cfg'
 drivers/scsi/bfa/bfa_fcpim.c:3829: warning: Function parameter or member 'drv_cfg_param' not described in 'bfa_fcpim_get_throttle_cfg'

Link: https://lore.kernel.org/r/20200723122446.1329773-11-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This change subsequently makes 'rp_fcs' unused also.  Remove that too.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_fcpim.c: In function ‘bfa_fcpim_lunmask_delete’:
 drivers/scsi/bfa/bfa_fcpim.c:2338:22: warning: variable ‘rp’ set but not used [-Wunused-but-set-variable]
 2338 | struct bfa_rport_s *rp = NULL;
 | ^~

Link: https://lore.kernel.org/r/20200723122446.1329773-10-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bnx2i/bnx2i_sysfs.c:40: warning: Function parameter or member 'attr' not described in 'bnx2i_show_sq_info'
 drivers/scsi/bnx2i/bnx2i_sysfs.c:60: warning: Function parameter or member 'attr' not described in 'bnx2i_set_sq_info'
 drivers/scsi/bnx2i/bnx2i_sysfs.c:96: warning: Function parameter or member 'attr' not described in 'bnx2i_show_ccell_info'
 drivers/scsi/bnx2i/bnx2i_sysfs.c:114: warning: Function parameter or member 'attr' not described in 'bnx2i_set_ccell_info'

Link: https://lore.kernel.org/r/20200723122446.1329773-9-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

These calls are not invoked externally.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_port.c:760:1: warning: no previous prototype for ‘bfa_cee_isr’ [-Wmissing-prototypes]
 760 | bfa_cee_isr(void *cbarg, struct bfi_mbmsg_s *m)
 | ^~~~~~~~~~~
 drivers/scsi/bfa/bfa_port.c:796:1: warning: no previous prototype for ‘bfa_cee_notify’ [-Wmissing-prototypes]
 796 | bfa_cee_notify(void *arg, enum bfa_ioc_event_e event)
 | ^~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200723122446.1329773-8-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This is the only use of kerneldoc in the source file and no descriptions
are provided.

Fixes the following W=1 kernel build warning(s):

In file included from  drivers/scsi/ufs/ufs-exynos.c:23:
 drivers/scsi/ufs/ufs-exynos.c:234: warning: Function parameter or member 'ufs' not described in 'exynos_ufs_auto_ctrl_hcc'
 drivers/scsi/ufs/ufs-exynos.c:234: warning: Function parameter or member 'en' not described in 'exynos_ufs_auto_ctrl_hcc'

Link: https://lore.kernel.org/r/20200723122446.1329773-7-lee.jones@linaro.org
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Seungwon Jeon <essuuj@gmail.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bnx2i/bnx2i_init.c:83: warning: Function parameter or member 'dev' not described in 'bnx2i_identify_device'
 drivers/scsi/bnx2i/bnx2i_init.c:83: warning: Excess function parameter 'cnic' description in 'bnx2i_identify_device'

Link: https://lore.kernel.org/r/20200723122446.1329773-5-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/ufs/ufs-qcom.c:253: warning: Function parameter or member 'hba' not described in 'ufs_qcom_host_reset'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'hba' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'gear' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'hs' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'rate' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'update_link_startup_timer' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:1738: error: Cannot parse struct or union!

Link: https://lore.kernel.org/r/20200723122446.1329773-4-lee.jones@linaro.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_hbadisc.c:1209: warning: Function parameter or member 'phba' not described in 'lpfc_sli4_clear_fcf_rr_bmask'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1309: warning: Function parameter or member 'sw_name' not described in 'lpfc_sw_name_match'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1309: warning: Excess function parameter 'fab_name' description in 'lpfc_sw_name_match'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1397: warning: Function parameter or member 'fcf_rec' not described in 'lpfc_copy_fcf_record'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1397: warning: Excess function parameter 'fcf' description in 'lpfc_copy_fcf_record'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1956: warning: Cannot understand  lpfc_sli4_fcf_record_match - testing new FCF record for matching existing FCF
 on line 1956 - I thought it was a doc line
 drivers/scsi/lpfc/lpfc_hbadisc.c:2078: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_fcf_pri_list_del'
 drivers/scsi/lpfc/lpfc_hbadisc.c:2109: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_set_fcf_flogi_fail'
 drivers/scsi/lpfc/lpfc_hbadisc.c:2135: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_fcf_pri_list_add'
 drivers/scsi/lpfc/lpfc_hbadisc.c:2135: warning: Function parameter or member 'new_fcf_record' not described in 'lpfc_sli4_fcf_pri_list_add'

Link: https://lore.kernel.org/r/20200723122446.1329773-3-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_els.c:3619: warning: Function parameter or member 't' not described in 'lpfc_els_retry_delay'
 drivers/scsi/lpfc/lpfc_els.c:3619: warning: Excess function parameter 'ptr' description in 'lpfc_els_retry_delay'
 drivers/scsi/lpfc/lpfc_els.c:4877: warning: Function parameter or member 'rejectError' not described in 'lpfc_els_rsp_reject'
 drivers/scsi/lpfc/lpfc_els.c:7900: warning: Function parameter or member 't' not described in 'lpfc_els_timeout'
 drivers/scsi/lpfc/lpfc_els.c:7900: warning: Excess function parameter 'ptr' description in 'lpfc_els_timeout'
 drivers/scsi/lpfc/lpfc_els.c:8272: warning: Function parameter or member 'payload' not described in 'lpfc_send_els_event'
 drivers/scsi/lpfc/lpfc_els.c:8272: warning: Excess function parameter 'cmd' description in 'lpfc_send_els_event'
 drivers/scsi/lpfc/lpfc_els.c:8355: warning: Function parameter or member 'tlv' not described in 'lpfc_els_rcv_fpin_li'
 drivers/scsi/lpfc/lpfc_els.c:8355: warning: Excess function parameter 'lnk_not' description in 'lpfc_els_rcv_fpin_li'
 drivers/scsi/lpfc/lpfc_els.c:9688: warning: Function parameter or member 't' not described in 'lpfc_fabric_block_timeout'
 drivers/scsi/lpfc/lpfc_els.c:9688: warning: Excess function parameter 'ptr' description in 'lpfc_fabric_block_timeout'

Link: https://lore.kernel.org/r/20200723122446.1329773-2-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Also move the header block above the correct function.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Function parameter or member 'dev' not described in 'arp_failure_skb_discard'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Function parameter or member 'skb' not described in 'arp_failure_skb_discard'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Excess function parameter 'c3cn' description in 'arp_failure_skb_discard'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Excess function parameter 'req_completion' description in 'arp_failure_skb_discard'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:895: warning: Function parameter or member 'csk' not described in 'l2t_put'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:895: warning: Excess function parameter 'c3cn' description in 'l2t_put'

Link: https://lore.kernel.org/r/20200721164148.2617584-41-lee.jones@linaro.org
Cc: Karen Xie <kxie@chelsio.com>
Cc: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Only declare 'tp' and 'lp' if they are going to be used.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/sym53c8xx_2/sym_hipd.c: In function ‘sym_complete_error’:
 drivers/scsi/sym53c8xx_2/sym_hipd.c:5356:18: warning: variable ‘lp’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/sym53c8xx_2/sym_hipd.c: In function ‘sym_complete_ok’:
 drivers/scsi/sym53c8xx_2/sym_hipd.c:5485:18: warning: variable ‘lp’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200721164148.2617584-39-lee.jones@linaro.org
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Gerard Roudier <groudier@free.fr>
Cc: Wolfgang Stanglmeier <wolf@cologne.de>
Cc: Stefan Esser <se@mi.Uni-Koeln.de>
Cc: Richard Waltham <dormouse@farsrobt.demon.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/sym53c8xx_2/sym_glue.c:1784: warning: Function parameter or member 'pdev' not described in 'sym2_reset_workarounds'

Link: https://lore.kernel.org/r/20200721164148.2617584-38-lee.jones@linaro.org
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Gerard Roudier <groudier@free.fr>
Cc: Wolfgang Stanglmeier <wolf@cologne.de>
Cc: Stefan Esser <se@mi.Uni-Koeln.de>
Cc: Richard Waltham <dormouse@farsrobt.demon.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

'pg_addr' is only used when CONFIG_X86 is defined.  So only declare it if
CONFIG_X86 is defined.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_sli.c: In function ‘lpfc_wq_create’:
 drivers/scsi/lpfc/lpfc_sli.c:15813:16: warning: unused variable ‘pg_addr’ [-Wunused-variable]
 15813 | unsigned long pg_addr;
 | ^~~~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-37-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfad_bsg.c:19:1: warning: no previous prototype for ‘bfad_iocmd_ioc_enable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:42:1: warning: no previous prototype for ‘bfad_iocmd_ioc_disable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:150:1: warning: no previous prototype for ‘bfad_iocmd_ioc_get_fwstats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:180:1: warning: no previous prototype for ‘bfad_iocmd_ioc_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:198:1: warning: no previous prototype for ‘bfad_iocmd_ioc_set_name’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:212:1: warning: no previous prototype for ‘bfad_iocmd_iocfc_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:223:1: warning: no previous prototype for ‘bfad_iocmd_ioc_fw_sig_inv’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:235:1: warning: no previous prototype for ‘bfad_iocmd_iocfc_set_intr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:248:1: warning: no previous prototype for ‘bfad_iocmd_port_enable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:269:1: warning: no previous prototype for ‘bfad_iocmd_port_disable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:319:1: warning: no previous prototype for ‘bfad_iocmd_port_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:353:1: warning: no previous prototype for ‘bfad_iocmd_port_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:374:1: warning: no previous prototype for ‘bfad_iocmd_set_port_cfg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:394:1: warning: no previous prototype for ‘bfad_iocmd_port_cfg_maxfrsize’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:408:1: warning: no previous prototype for ‘bfad_iocmd_port_cfg_bbcr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:431:1: warning: no previous prototype for ‘bfad_iocmd_port_get_bbcr_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:469:1: warning: no previous prototype for ‘bfad_iocmd_lport_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:493:1: warning: no previous prototype for ‘bfad_iocmd_lport_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:527:1: warning: no previous prototype for ‘bfad_iocmd_lport_get_iostats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:552:1: warning: no previous prototype for ‘bfad_iocmd_lport_get_rports’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:594:1: warning: no previous prototype for ‘bfad_iocmd_rport_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:680:1: warning: no previous prototype for ‘bfad_iocmd_rport_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:721:1: warning: no previous prototype for ‘bfad_iocmd_rport_clr_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:757:1: warning: no previous prototype for ‘bfad_iocmd_rport_set_speed’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:793:1: warning: no previous prototype for ‘bfad_iocmd_vport_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:816:1: warning: no previous prototype for ‘bfad_iocmd_vport_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:844:1: warning: no previous prototype for ‘bfad_iocmd_vport_clr_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:911:1: warning: no previous prototype for ‘bfad_iocmd_qos_set_bw’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:924:1: warning: no previous prototype for ‘bfad_iocmd_ratelim’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:953:1: warning: no previous prototype for ‘bfad_iocmd_ratelim_speed’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:982:1: warning: no previous prototype for ‘bfad_iocmd_cfg_fcpim’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:995:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_get_modstats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1017:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_clr_modstats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1039:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_get_del_itn_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1164:1: warning: no previous prototype for ‘bfad_iocmd_fcport_enable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1177:1: warning: no previous prototype for ‘bfad_iocmd_fcport_disable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1190:1: warning: no previous prototype for ‘bfad_iocmd_ioc_get_pcifn_cfg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1212:1: warning: no previous prototype for ‘bfad_iocmd_pcifn_create’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1235:1: warning: no previous prototype for ‘bfad_iocmd_pcifn_delete’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1257:1: warning: no previous prototype for ‘bfad_iocmd_pcifn_bw’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1281:1: warning: no previous prototype for ‘bfad_iocmd_adapter_cfg_mode’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1304:1: warning: no previous prototype for ‘bfad_iocmd_port_cfg_mode’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1328:1: warning: no previous prototype for ‘bfad_iocmd_ablk_optrom’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1354:1: warning: no previous prototype for ‘bfad_iocmd_faa_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1377:1: warning: no previous prototype for ‘bfad_iocmd_cee_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1413:1: warning: no previous prototype for ‘bfad_iocmd_cee_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1450:1: warning: no previous prototype for ‘bfad_iocmd_cee_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1464:1: warning: no previous prototype for ‘bfad_iocmd_sfp_media’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1486:1: warning: no previous prototype for ‘bfad_iocmd_sfp_speed’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1507:1: warning: no previous prototype for ‘bfad_iocmd_flash_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1528:1: warning: no previous prototype for ‘bfad_iocmd_flash_erase_part’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1548:1: warning: no previous prototype for ‘bfad_iocmd_flash_update_part’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1580:1: warning: no previous prototype for ‘bfad_iocmd_flash_read_part’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1612:1: warning: no previous prototype for ‘bfad_iocmd_diag_temp’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1634:1: warning: no previous prototype for ‘bfad_iocmd_diag_memtest’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1657:1: warning: no previous prototype for ‘bfad_iocmd_diag_loopback’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1680:1: warning: no previous prototype for ‘bfad_iocmd_diag_fwping’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1704:1: warning: no previous prototype for ‘bfad_iocmd_diag_queuetest’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1725:1: warning: no previous prototype for ‘bfad_iocmd_diag_sfp’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1748:1: warning: no previous prototype for ‘bfad_iocmd_diag_led’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1761:1: warning: no previous prototype for ‘bfad_iocmd_diag_beacon_lport’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1776:1: warning: no previous prototype for ‘bfad_iocmd_diag_lb_stat’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1791:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_enable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1813:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_disable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1833:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_start’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1858:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_show’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1873:1: warning: no previous prototype for ‘bfad_iocmd_phy_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1894:1: warning: no previous prototype for ‘bfad_iocmd_phy_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1915:1: warning: no previous prototype for ‘bfad_iocmd_phy_read’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1947:1: warning: no previous prototype for ‘bfad_iocmd_vhba_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1966:1: warning: no previous prototype for ‘bfad_iocmd_phy_update’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1996:1: warning: no previous prototype for ‘bfad_iocmd_porglog_get’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2016:1: warning: no previous prototype for ‘bfad_iocmd_debug_fw_core’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2050:1: warning: no previous prototype for ‘bfad_iocmd_debug_ctl’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2071:1: warning: no previous prototype for ‘bfad_iocmd_porglog_ctl’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2085:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_cfg_profile’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2129:1: warning: no previous prototype for ‘bfad_iocmd_fcport_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2154:1: warning: no previous prototype for ‘bfad_iocmd_fcport_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2178:1: warning: no previous prototype for ‘bfad_iocmd_boot_cfg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2200:1: warning: no previous prototype for ‘bfad_iocmd_boot_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2222:1: warning: no previous prototype for ‘bfad_iocmd_preboot_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2241:1: warning: no previous prototype for ‘bfad_iocmd_ethboot_cfg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2264:1: warning: no previous prototype for ‘bfad_iocmd_ethboot_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2287:1: warning: no previous prototype for ‘bfad_iocmd_cfg_trunk’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2327:1: warning: no previous prototype for ‘bfad_iocmd_trunk_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2350:1: warning: no previous prototype for ‘bfad_iocmd_qos’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2378:1: warning: no previous prototype for ‘bfad_iocmd_qos_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2404:1: warning: no previous prototype for ‘bfad_iocmd_qos_get_vc_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2436:1: warning: no previous prototype for ‘bfad_iocmd_qos_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2468:1: warning: no previous prototype for ‘bfad_iocmd_qos_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2499:1: warning: no previous prototype for ‘bfad_iocmd_vf_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2522:1: warning: no previous prototype for ‘bfad_iocmd_vf_clr_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2559:1: warning: no previous prototype for ‘bfad_iocmd_lunmask’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2582:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_lunmask_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2596:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_cfg_lunmask’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2615:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_throttle_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2630:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_throttle_set’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2645:1: warning: no previous prototype for ‘bfad_iocmd_tfru_read’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2667:1: warning: no previous prototype for ‘bfad_iocmd_tfru_write’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2689:1: warning: no previous prototype for ‘bfad_iocmd_fruvpd_read’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2711:1: warning: no previous prototype for ‘bfad_iocmd_fruvpd_update’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2733:1: warning: no previous prototype for ‘bfad_iocmd_fruvpd_get_max_size’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3181:1: warning: no previous prototype for ‘bfad_fcxp_get_req_sgaddr_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3193:1: warning: no previous prototype for ‘bfad_fcxp_get_req_sglen_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3203:1: warning: no previous prototype for ‘bfad_fcxp_get_rsp_sgaddr_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3215:1: warning: no previous prototype for ‘bfad_fcxp_get_rsp_sglen_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3225:1: warning: no previous prototype for ‘bfad_send_fcpt_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3240:1: warning: no previous prototype for ‘bfad_fcxp_map_sg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3284:1: warning: no previous prototype for ‘bfad_fcxp_free_mem’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3302:1: warning: no previous prototype for ‘bfad_fcxp_bsg_send’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3342:1: warning: no previous prototype for ‘bfad_im_bsg_els_ct_request’ [-Wmissing-prototypes]

Link: https://lore.kernel.org/r/20200721164148.2617584-36-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This matches some of the other headers in the file.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/csiostor/csio_lnode.c:2079: warning: Function parameter or member 'hw' not described in 'csio_lnode_init'
 drivers/scsi/csiostor/csio_lnode.c:2079: warning: Function parameter or member 'pln' not described in 'csio_lnode_init'

Link: https://lore.kernel.org/r/20200721164148.2617584-35-lee.jones@linaro.org
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Demote other headers which are clearly not kerneldoc.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_nx.c:983: warning: Function parameter or member 'ha' not described in 'qla4_82xx_pinit_from_rom'
 drivers/scsi/qla4xxx/ql4_nx.c:983: warning: Function parameter or member 'verbose' not described in 'qla4_82xx_pinit_from_rom'
 drivers/scsi/qla4xxx/ql4_nx.c:3225: warning: Function parameter or member 'code' not described in 'qla4_8xxx_uevent_emit'
 drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'ha' not described in 'qla4_82xx_read_optrom_data'
 drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'buf' not described in 'qla4_82xx_read_optrom_data'
 drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'offset' not described in 'qla4_82xx_read_optrom_data'
 drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'length' not described in 'qla4_82xx_read_optrom_data'

Link: https://lore.kernel.org/r/20200721164148.2617584-34-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>