- 24 Jul, 2024 5 commits
-
-
Marek Vasut authored
Add Densitron DMT028VGHMCMI-1D 480x640 TFT matrix 2.83 inch panel attached to Ilitek ILI9806E DSI TCON into the ILI9806E driver. Note that the Densitron panels use different TCONs, this driver is for the later panel, use panel-ilitek-st7701.c for the former panel: DMT028VGHMCMI-1A - ST7701 DMT028VGHMCMI-1D - ILI9806E Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20240724005700.196073-2-marex@denx.deSigned-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240724005700.196073-2-marex@denx.de
-
Marek Vasut authored
Document Densitron DMT028VGHMCMI-1D 480x640 TFT matrix 2.83 inch panel attached to Ilitek ILI9806E DSI TCON in the ILI9806E bindings. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240724005700.196073-1-marex@denx.deSigned-off-by:
-
Zhaoxiong Lv authored
Use public functions( drm_connector_helper_get_modes_fixed()) to get porch parameters. Signed-off-by:
Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240723062615.14796-3-lvzhaoxiong@huaqin.corp-partner.google.comSigned-off-by:
-
Zhaoxiong Lv authored
The current driver can only obtain the porch parameters of boe-th101mb31ig002. Modify it to obtain the porch parameters of the panel currently being used. Reviewed-by:
-
Dang Huynh authored
Enable prepare_prev_first flag for BF060Y8M-AJ0 panel so that the previous controller should be prepared first before the prepare for the panel is called. This makes sure that the previous controller, likely to be a DSI host controller should be initialized to LP-11 before the panel is powered up. Suggested-by:
Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by:
Dang Huynh <danct12@riseup.net> Reviewed-by:
-
- 23 Jul, 2024 5 commits
-
-
Markus Elfring authored
Single characters should be put into a sequence. Thus use the corresponding function “seq_putc” for one selected call. This issue was transformed by using the Coccinelle software. Suggested-by:
Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Marek Vasut authored
Make the default DP port preemphasis configurable via new DT property "toshiba,pre-emphasis". This is useful in case the DP link properties are known and starting link training from preemphasis setting of 0 dB is not useful. The preemphasis can be set separately for both DP lanes in range 0=0dB, 1=3.5dB, 2=6dB . Acked-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
-
Marek Vasut authored
Document default DP port preemphasis configurable via new DT property "toshiba,pre-emphasis". This is useful in case the DP link properties are known and starting link training from preemphasis setting of 0 dB is not useful. The preemphasis can be set separately for both DP lanes in range 0=0dB, 1=3.5dB, 2=6dB . This is an endpoint property, not a port property, because the TC9595 datasheet does mention that the DP might operate in some sort of split mode, where each DP lane is used to feed one display, so in that case there might be two endpoints. Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240708150130.54484-1-marex@denx.de
-
Rajneesh Bhardwaj authored
Limiting the allocation of higher order pages to the closest NUMA node and enabling direct memory reclaim provides not only failsafe against situations when memory becomes too much fragmented and the allocator is not able to satisfy the request from the local node but falls back to remote pages (HUGEPAGE) but also offers performance improvement. Accessing remote pages suffers due to bandwidth limitations and could be avoided if memory becomes defragmented and in most cases without using manual compaction. (/proc/sys/vm/compact_memory) Note: On certain distros such as RHEL, the proactive compaction is disabled. (https://tinyurl.com/4f32f7rs) v2 (chk): drop __GFP_RECLAIM since that is already set by GFP_USER Cc: Dave Airlie <airlied@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240708160636.1147308-1-rajneesh.bhardwaj@amd.comSigned-off-by:
-
T.J. Mercier authored
The docs for dma_heap_get_name were incorrect, and since they were duplicated in the header they were wrong there too. The docs formatting was inconsistent so I tried to make it more consistent across functions since I'm already in here doing cleanup. Remove multiple unused includes and alphabetize. Signed-off-by:
T.J. Mercier <tjmercier@google.com> Signed-off-by:
Yong Wu <yong.wu@mediatek.com> [Yong: Just add a comment for "priv" to mute build warning] Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240720071606.27930-5-yunfei.dong@mediatek.comSigned-off-by:
-
- 22 Jul, 2024 7 commits
-
-
Danilo Krummrich authored
TTM wants to get rid of the duplicate refcounting of the embedded GEM object and its own reference count. Hence, use of GEM object references where possible. Also get rid of nouveau_bo_ref() and replace it with nouveau_bo_fini(), which drops the initial reference we get from initializing a ttm_bo. Reviewed-by:
Ben Skeggs <bskeggs@nvidia.com> Acked-by:
Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240718165959.3983-4-dakr@kernel.org
-
Danilo Krummrich authored
nouveau_bo_new_pin_map() and nouveau_bo_unmap_unpin_unref() are unused, hence remove them. Reviewed-by:
-
Danilo Krummrich authored
Calling nouveau_bo_ref() on a nouveau_bo without initializing it (and hence the backing ttm_bo) leads to a refcount underflow. Instead of calling nouveau_bo_ref() in the unwind path of drm_gem_object_init(), clean things up manually. Fixes: ab9ccb96 ("drm/nouveau: use prime helpers") Reviewed-by:
-
Terry Hsiao authored
The raw EDIDs for each panel: AUO - B116XTN02.3 00 ff ff ff ff ff ff 00 06 af aa 73 00 00 00 00 00 21 01 04 95 1a 0e 78 02 6b f5 91 55 54 91 27 22 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 ce 1d 56 e2 50 00 1e 30 26 16 36 00 00 90 10 00 00 18 df 13 56 e2 50 00 1e 30 26 16 36 00 00 90 10 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 10 48 ff 0f 3c 7d 50 05 18 7d 20 20 20 00 67 - B116XAN06.1 00 ff ff ff ff ff ff 00 06 af 99 a1 00 00 00 00 00 1f 01 04 95 1a 0e 78 02 9e a5 96 59 58 96 28 1b 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 ce 1d 56 ea 50 00 1a 30 30 20 46 00 00 90 10 00 00 18 df 13 56 ea 50 00 1a 30 30 20 46 00 00 90 10 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 10 48 ff 0f 3c 7d 0c 0a 2a 7d 20 20 20 00 3a - B116XAT04.1 00 ff ff ff ff ff ff 00 06 af b4 c4 00 00 00 00 12 22 01 04 95 1a 0e 78 02 9e a5 96 59 58 96 28 1b 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 ce 1d 56 ea 50 00 1a 30 30 20 46 00 00 90 10 00 00 18 df 13 56 ea 50 00 1a 30 30 20 46 00 00 90 10 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 10 48 ff 0f 3c 7d 0c 0a 2a 7d 20 20 20 00 e7 BOE - NV116WHM-A4D 00 ff ff ff ff ff ff 00 09 e5 fa 0c 00 00 00 00 12 22 01 04 95 1a 0e 78 03 0b 55 9a 5f 58 95 28 1e 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 96 1d 56 c8 50 00 26 30 30 20 36 00 00 90 10 00 00 1a b9 13 56 c8 50 00 26 30 30 20 36 00 00 90 10 00 00 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 0d 40 ff 0a 3c 7d 0f 0c 17 7d 00 00 00 00 1a CMN - N116BCA-EA2 00 ff ff ff ff ff ff 00 0d ae 5d 11 00 00 00 00 0f 21 01 04 95 1a 0e 78 03 67 75 98 59 53 90 27 1c 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 da 1d 56 e2 50 00 20 30 30 20 a6 00 00 90 10 00 00 1a e7 13 56 e2 50 00 20 30 30 20 a6 00 00 90 10 00 00 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 0c 3d ff 0d 3c 7d 0d 0a 15 7d 00 00 00 00 0f - N116BCP-EA2 00 ff ff ff ff ff ff 00 0d ae 61 11 00 00 00 00 0f 21 01 04 95 1a 0e 78 03 67 75 98 59 53 90 27 1c 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 da 1d 56 e2 50 00 20 30 30 20 a6 00 00 90 10 00 00 1a e7 13 56 e2 50 00 20 30 30 20 a6 00 00 90 10 00 00 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 0c 3d ff 0d 3c 7d 0d 0a 15 7d 00 00 00 00 0b Signed-off-by:
Terry Hsiao <terry_hsiao@compal.corp-partner.google.com> Reviewed-by:
-
Douglas Anderson authored
At shutdown if you've got a _properly_ coded DRM modeset driver then you'll get these two warnings at shutdown time: Skipping disable of already disabled panel Skipping unprepare of already unprepared panel These warnings are ugly and sound concerning, but they're actually a sign of a properly working system. That's not great. We're not ready to get rid of the calls to drm_panel_disable() and drm_panel_unprepare() because we're not 100% convinced that all DRM modeset drivers are properly calling drm_atomic_helper_shutdown() or drm_helper_force_disable_all() at the right times. However, having the warning show up for correctly working systems is bad. As a bit of a workaround, add some "if" tests to try to avoid the warning on correctly working systems. Also add some comments and update the TODO items in the hopes that future developers won't be too confused by what's going on here. Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Jocelyn Falempe authored
When the kmsg_dumper callback parameter changed, the reason variable in mtdoops_do_dump() was not updated accordingly. This breaks the build with mtdoops. Fixes: e1a261ba ("printk: Add a short description string to kmsg_dump()") Suggested-by:
Knop Ryszard <ryszard.knop@intel.com> Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Acked-by:
Richard Weinberger <richard@nod.at> Link: https://patchwork.freedesktop.org/patch/msgid/20240719152542.1554440-1-jfalempe@redhat.com
-
Jocelyn Falempe authored
Panic_cpu is not exported, so it can't be used if fbcon is used as a module. Use oops_in_progress in this case, but non-fatal oops won't be printed. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407210203.2ISiIC9m-lkp@intel.com/Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240722114800.174558-1-jfalempe@redhat.com
-
- 19 Jul, 2024 16 commits
-
-
Jocelyn Falempe authored
This breaks build if DRM_PANIC is not enabled. Also add the missing include drm_crtc_internal.h in drm_panic.c Fixes: 9f774c42 ("drm/panic: Add drm_panic_is_enabled()") Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240719122051.1507927-1-jfalempe@redhat.com
-
Arnd Bergmann authored
The added lvds driver and a change in the dsi driver resulted in failed builds when COMMON_CLK is disabled: x86_64-linux-ld: drivers/gpu/drm/stm/dw_mipi_dsi-stm.o: in function `dw_mipi_dsi_stm_remove': dw_mipi_dsi-stm.c:(.text+0x51e): undefined reference to `clk_hw_unregister' x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_remove': lvds.c:(.text+0xe3): undefined reference to `of_clk_del_provider' x86_64-linux-ld: lvds.c:(.text+0xec): undefined reference to `clk_hw_unregister' x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_pll_config': lvds.c:(.text+0xb5d): undefined reference to `clk_hw_get_rate' x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_probe': lvds.c:(.text+0x1476): undefined reference to `clk_hw_register' x86_64-linux-ld: lvds.c:(.text+0x148b): undefined reference to `of_clk_hw_simple_get' x86_64-linux-ld: lvds.c:(.text+0x1493): undefined reference to `of_clk_add_hw_provider' x86_64-linux-ld: lvds.c:(.text+0x1535): undefined reference to `clk_hw_unregister' Add this as a dependency for the stm driver itself, since it will be required in practice anyway. Fixes: 185f99b6 ("drm/stm: dsi: expose DSI PHY internal clock") Fixes: aca1cbc1 ("drm/stm: lvds: add new STM32 LVDS Display Interface Transmitter driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240719075454.3595358-1-arnd@kernel.orgSigned-off-by:
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
-
Jocelyn Falempe authored
Now that fbcon has the skip_panic option, there is no more conflicts between drm_panic and fbcon. Remove the build time dependency, so they can be both enabled. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Jocelyn Falempe authored
fb_info->skip_panic flag prevents fbcon from writing to the framebuffer during a kernel panic. So set it when the drm driver implements drm panic, to avoid overwriting the panic screen. Signed-off-by:
-
Jocelyn Falempe authored
This is required to avoid conflict between DRM_PANIC, and fbcon. If a drm device already handle panic with drm_panic, it should set the skip_panic field in fb_info, so that fbcon will stay quiet, and not overwrite the panic_screen. Signed-off-by:
-
Jocelyn Falempe authored
It allows to check if the drm device supports drm_panic. Prepare the work to have better integration with fbcon and vtconsole. Signed-off-by:
-
Yannick Fertre authored
The reload interrupt is not used by the driver. To avoid unnecessary calls of the interrupt routine, don't enable it. Solve small typo and add mask to simplify the driver. Signed-off-by:
Yannick Fertre <yannick.fertre@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240712131453.98597-1-yannick.fertre@foss.st.comSigned-off-by:
-
Yannick Fertre authored
The purpose of this mask is to simplify writing to the lxcr register and not to forget any fields. Signed-off-by:
-
Yannick Fertre authored
The plane's opacity should be reseted while the plane is disabled. It prevents from seeing a possible global or layer background color set earlier. Signed-off-by:
-
Thomas Zimmermann authored
Implement struct drm_crtc_funcs.get_vblank_timestamp with the DRM helper drm_crtc_vblank_helper_get_vblank_timestamp() with its helper get_scanout_position. Read the scanout position from the MGAREG_VCOUNT register. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Thomas Zimmermann authored
There's no VBLANK interrupt on Matrox chipsets. The workaround that is being used here and in other free Matrox drivers is to program <linecomp> to the value of <vblkstr> and enable the VLINE interrupt. This triggers an interrupt at the time when VBLANK begins. VLINE uses separate registers for enabling and clearing pending interrupts. No extra synchronization between irq handler and the rest of the driver is required. v6: - clear VLINE status bit before registering IRQ (Jocelyn) v5: - disable all interrupts before registering IRQ (Jocelyn) - don't read from ICLEAR (Jocelyn) v4: - recreate patch on latest upstream - use devm_request_irq() for managed cleanup - fail if vblanking cannot be initialized - rename register constants (Sam, Emil) - clear interrupt before registering handler (Ville) - move <linecomp> programming into separate commit - set <linecomp> to <vblkstr> - fix typo in commit message v3: - set <linecomp> to <vdisplay> + 1 to trigger at VBLANK - expand comment on linecomp v2: - only signal vblank on CRTC 0 - use constants for registers and fields - set VLINECLR before enabling interrupt - test against STATUS and IEN in irq handler - coding-style fixes Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Tested-by:
-
Thomas Zimmermann authored
Replace the line-compare value of <vdispend> with a dedicated variable <linecomp>. Improves readability and prepares for vblank support. Signed-off-by:
-
Thomas Zimmermann authored
Represent fields for horizontal and vertical blanking with <hblkstr>, <hblkend>, <vblkstr> and <vblkend>. Aligns the code with the Matrox programming manuals. Signed-off-by:
-
Thomas Zimmermann authored
Use the values with the crtc_ prefix from struct drm_display_mode to program hardware. The DRM core adjusted these values to the requirements of CRTC hardware. Signed-off-by:
-
Thomas Zimmermann authored
In mgag200_set_mode_regs(), align variable names with the field names given in the Matrox programming manuals. Makes the code and docs grep- able. Signed-off-by:
-
Thomas Zimmermann authored
In mgag200_set_mode_regs(), use hexadecimal indices for accessing registers. Aligns the code with the register indices in the Matrox programming manuals. Also convert to lower-case hexadecimal values. Signed-off-by:
-
- 18 Jul, 2024 4 commits
-
-
Dr. David Alan Gilbert authored
commit 6a1688ae ("drm/bridge: ptn3460: Convert to I2C driver model") has dropped all the users of the struct bridge_init from the exynos_dp_core, while retaining unused structure definition. Later on the driver was reworked and the definition migrated to the analogix_dp driver. Remove unused struct bridge_init definition. Signed-off-by:
Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240520125551.11534-1-linux@treblig.orgSigned-off-by:
-
Daniel Vetter authored
We already teach lockdep that dma_resv nests within drm_modeset_lock, but there's a lot more: All drm kms ioctl rely on being able to put/get_user while holding modeset locks, so we really need a might_fault in there too to complete the picture. Add it. Motivated by a syzbot report that blew up on bcachefs doing an unconditional console_lock way deep in the locking hierarchy, and lockdep only noticing the depency loop in a drm ioctl instead of much earlier. This annotation will make sure such issues have a much harder time escaping. References: https://lore.kernel.org/dri-devel/00000000000073db8b061cd43496@google.com/Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Reviewed-by:
-
Cristian Ciocaltea authored
The recent switch to drmm allocation in drm_bridge_connector_init() may cause double free on bridge_connector in some of the error handling paths. Drop the explicit kfree() calls on bridge_connector. Fixes: c12907be ("drm/bridge-connector: switch to using drmm allocations") Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by:
Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240711-bridge-connector-fix-dbl-free-v1-1-d558b2d0eb93@collabora.com
-
Alexander Stein authored
When -EPROBE_DEFER is returned do not raise an error, but silently return this error instead. Fixes error like this: [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@30800000/mipi-dsi@30a00000 to encoder None-34: -517 [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@30800000/mipi-dsi@30a00000 to encoder None-34: -517 Signed-off-by:
-
- 17 Jul, 2024 1 commit
-
-
Jocelyn Falempe authored
kmsg_dump doesn't forward the panic reason string to the kmsg_dumper callback. This patch adds a new struct kmsg_dump_detail, that will hold the reason and description, and pass it to the dump() callback. To avoid updating all kmsg_dump() call, it adds a kmsg_dump_desc() function and a macro for backward compatibility. I've written this for drm_panic, but it can be useful for other kmsg_dumper. It allows to see the panic reason, like "sysrq triggered crash" or "VFS: Unable to mount root fs on xxxx" on the drm panic screen. v2: * Use a struct kmsg_dump_detail to hold the reason and description pointer, for more flexibility if we want to add other parameters. (Kees Cook) * Fix powerpc/nvram_64 build, as I didn't update the forward declaration of oops_to_nvram() Signed-off-by:
Petr Mladek <pmladek@suse.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by:
Kees Cook <kees@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240702122639.248110-1-jfalempe@redhat.com
-
- 16 Jul, 2024 2 commits
-
-
Clayton Craft authored
This panel is found on some laptops e.g., variants of the Thinkpad X13s. Signed-off-by:
Clayton Craft <clayton@craftyguy.net> Link: https://patchwork.freedesktop.org/patch/msgid/20240520221836.16031-1-clayton@craftyguy.net [DB: moved the entry to the proper place] Signed-off-by:
-
Marek Vasut authored
In case an upstream bridge modified the required clock frequency in its .atomic_check callback by setting adjusted_mode.clock , make sure that clock frequency is generated by the LCDIFv3 block. This is useful e.g. when LCDIFv3 feeds DSIM which feeds TC358767 with (e)DP output, where the TC358767 expects precise timing on its input side, the precise timing must be generated by the LCDIF. Signed-off-by:
-
