- 07 Oct, 2015 40 commits
-
-
Shannon Nelson authored
i40e_init_pf_fcoe() didn't return anything except 0, it prints enough error info already, and no driver logic depends on the return value, so this can be void. Change-ID: Ie6afad849857d87a7064c42c3cce14c74c2f29d8 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
Fix a shift value that was wrong, ending up with a bad bitmask. Also add a blank line between two sets of #defines for better readability. Change-ID: I3e41fa2a2ab904d3a4e6cbf13972ab0036a10601 Signed-off-by:
-
Shannon Nelson authored
Rework an if expression to assure there is no type compare problem between a size and a possible negative number. Change-ID: I4921fcc96abfcf69490efce020a9e4007f251c99 Reported-by:
Helin Zhang <helin.zhang@intel.com> Signed-off-by:
-
Shannon Nelson authored
Early addition of new a device id. Change-ID: I61a8c8556fdf4f5714be4e4089689e374f30293c Signed-off-by:
-
Mitch Williams authored
Explicitly stop the rings belonging to each VF when disabling SR-IOV. Even though the VFs were gone, and the associated VSIs were removed, the rings were not stopped, and in some circumstances the hardware would continue to access the memory formerly used by the rings, causing memory corruption or DMAR errors, both of which would lead to general malaise of the kernel. To relieve this condition, explicitly stop all the rings associated with each VF before releasing its resources. Change-ID: I78c05d562c66e7b594b7e48d67860f49b3e5b6ec Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Shannon Nelson authored
The driver was disabling Wake-on-LAN by default and waiting for the user to expressly turn it on. This patch has the driver turning on WoL from the start if enabled in the hardware config, which matches the behavior of our other drivers. Change-ID: I43faedb907f8ba4d1a61b72a7c86072b97af12b1 Signed-off-by:
-
Paul M Stillwell Jr authored
In some rare cases the reset can take longer to complete so increase the amount of time we wait. Change-ID: Ib5628ec54b526a811ee33d1214fe763226406671 Signed-off-by:
Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by:
-
Eric Dumazet authored
Some applications use a listen() backlog of 1. Prior kernels were silently enforcing a qlen_log of 4, so that we were sending up to /proc/sys/net/ipv4/tcp_synack_retries SYNACK messages. Fixes: ef547f2a ("tcp: remove max_qlen_log") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuvaraja Mariappan authored
Fixed an assignment coding style issue Signed-off-by:
Yuvaraja Mariappan <ymariappan@gmail.com> Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== s390: qeth patches for net-next here are some s390 related patches for net-next. The qeth patches are performance optimizations in the driver. The qdio patch corrects a warning condition. ==================== Signed-off-by: -
Eugene Crosser authored
If HiperSockets Completion Queueing is enabled, qdio always issues a warning, since the condition is always met. This patch fixes the condition in WARN_ON_ONCE that was always true. Signed-off-by:
Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Lakhvich Dmitriy authored
In layer2 mode of the qeth driver, MAC address lists from struct net_device require mapping to the OSA-card. The existing implementation is inefficient for lists with more than several MAC addresses, since for every ndo_set_rx_mode callback it removes all MAC addresses first, and then registers the current MAC address list. This patch changes implementation of ndo_set_rx_mode callback in qeth, only performing hardware registration/removal for new/deleted addresses. To shorten lookup of MAC addresses registered addresses are kept in a hashtable instead of a linear list. Signed-off-by:
Lakhvich Dmitriy <ldmitriy@ru.ibm.com> Signed-off-by:
Thomas Richter <tmricht@de.ibm.com> Tested-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Thomas Richter authored
Add support for GRO (generic receive offload) in the layer 2 part of device driver qeth. This results in a performance improvement when GRO and RX is turned on. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== bridge: netlink: complete port attribute support This is the second set that completes the bridge port's netlink support and makes everything from sysfs available via netlink. I've used sysfs as a guide of what and how to set again. I've tested setting/getting every option and also this time tested enabling KASAN. Again there're a few long line warnings about the ifla attribute names in br_port_info_size() but as the previous set - it's good to know what's been accounted for. ==================== Signed-off-by: -
Nikolay Aleksandrov authored
Add IFLA_BRPORT_MULTICAST_ROUTER to allow setting/getting port's multicast_router via netlink. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Add IFLA_BRPORT_FLUSH to allow flushing port's fdb similar to sysfs's flush. Signed-off-by:
-
Nikolay Aleksandrov authored
Add the following attributes in order to export port's timer values: IFLA_BRPORT_MESSAGE_AGE_TIMER, IFLA_BRPORT_FORWARD_DELAY_TIMER and IFLA_BRPORT_HOLD_TIMER. Signed-off-by:
-
Nikolay Aleksandrov authored
Add IFLA_BRPORT_TOPOLOGY_CHANGE_ACK and IFLA_BRPORT_CONFIG_PENDING to allow getting port's topology_change_ack and config_pending respectively via netlink. Signed-off-by:
-
Nikolay Aleksandrov authored
Add IFLA_BRPORT_(ID|NO) to allow getting port's port_id and port_no respectively via netlink. Signed-off-by:
-
Nikolay Aleksandrov authored
Add IFLA_BRPORT_DESIGNATED_(COST|PORT) to allow getting the port's designated cost and port respectively via netlink. Signed-off-by:
-
Nikolay Aleksandrov authored
Add IFLA_BRPORT_BRIDGE_ID to allow getting the designated bridge id via netlink. Signed-off-by:
-
Nikolay Aleksandrov authored
Add IFLA_BRPORT_ROOT_ID to allow getting the designated root id via netlink. Signed-off-by:
-
David Ahern authored
If the user specifies a VRF device in a get route query the custom route pointing to the VRF device is returned: $ ip route ls table vrf-red unreachable default broadcast 10.2.1.0 dev eth1 proto kernel scope link src 10.2.1.2 10.2.1.0/24 dev eth1 proto kernel scope link src 10.2.1.2 local 10.2.1.2 dev eth1 proto kernel scope host src 10.2.1.2 broadcast 10.2.1.255 dev eth1 proto kernel scope link src 10.2.1.2 $ ip route get oif vrf-red 10.2.1.40 10.2.1.40 dev vrf-red cache Add the flags to skip the custom route and go directly to the FIB. With this patch the actual route is returned: $ ip route get oif vrf-red 10.2.1.40 10.2.1.40 dev eth1 src 10.2.1.2 cache Signed-off-by:David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2015-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== For the current cycle, we have the following right now: * many internal fixes, API improvements, cleanups, etc. * full AP client state tracking in cfg80211/mac80211 from Ayala * VHT support (in mac80211) for mesh * some A-MSDU in A-MPDU support from Emmanuel * show current TX power to userspace (from Rafał) * support for netlink dump in vendor commands (myself) ==================== Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: Add saddr op to l3mdev and vrf First 2 patches are re-sends of patches that got lost in the ethosphere Tuesday; they were part of the first round of l3mdev conversions. Next 3 handle the source address lookup for raw and datagram sockets bound to a VRF device. The conversion to the get_saddr op also fixes locally originated TCP packets showing up at the VRF device. The use of the FLOWI_FLAG_L3MDEV_SRC flag in ip_route_connect_init was causing locally generated packets to skip the VRF device. v2 - rebased to top of net-next per device delete fix and hash based multipath patches ==================== Signed-off-by: -
David Ahern authored
ping originated on box through a VRF device is showing up in tcpdump without a source address: $ tcpdump -n -i vrf-blue 08:58:33.311303 IP 0.0.0.0 > 10.2.2.254: ICMP echo request, id 2834, seq 1, length 64 08:58:33.311562 IP 10.2.2.254 > 10.2.2.2: ICMP echo reply, id 2834, seq 1, length 64 Add the call to l3mdev_get_saddr to raw_sendmsg. Signed-off-by: -
David Ahern authored
Add operation to l3mdev to lookup source address for a given flow. Add support for the operation to VRF driver and convert existing IPv4 hooks to use the new lookup. Signed-off-by:
-
David Ahern authored
VRF device needs the same path selection following lookup to set source address. Rather than duplicating code, move existing code into a function that is exported to modules. Code move only; no functional change. Signed-off-by:
-
David Ahern authored
IPv6 addrconf keys off of IFF_SLAVE so can not use it for L3 slave. Add a new private flag and add netif_is_l3_slave function for checking it. Signed-off-by:
-
David Ahern authored
Signed-off-by:
-
David Ahern authored
It occurred to me yesterday that 741a11d9 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set") means that xfrm6_dst_lookup needs the FLOWI_FLAG_SKIP_NH_OIF flag set. This latest commit causes the oif to be considered in lookups which is known to break vti. This explains why 58189ca7 did not the IPv6 change at the time it was submitted. Fixes: 42a7b32b ("xfrm: Add oif to dst lookups") Signed-off-by:
-
Claudiu Manoil authored
This enables eTSEC's filer (Rx parser) and the FGPI Rx interrupt (Filer General Purpose Interrupt) as a wakeup source event. Upon entering suspend state, the eTSEC filer is given a rule to match incoming L2 unicast packets. A packet matching the rule will be enqueued in the Rx ring and a FGPI Rx interrupt will be asserted by the filer to wakeup the system. Other packet types will be dropped. On resume the filer table is restored to the content before entering suspend state. The set of rules from gfar_filer_config_wol() could be extended to implement other WoL capabilities as well. The "fsl,wake-on-filer" DT binding enables this capability on certain platforms that feature the necessary power management infrastructure, targeting mainly printing and imaging applications. (refer to Power Management section of the SoC Ref Man) Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
-
Claudiu Manoil authored
Enable the "wake-on-filer" (aka. wake on user defined packet) wake on lan capability for the eTSEC ethernet nodes. Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by:
-
Claudiu Manoil authored
Add the "fsl,wake-on-filer" property for eTSEC nodes to indicate that the system has the power management infrastructure needed to be able to wake up the system via FGPI (filer, aka. h/w rx parser) interrupt. Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by:
-
David S. Miller authored
Jiri Benc says: ==================== openvswitch: add IPv6 tunneling support This builds on the previous work that added IPv6 support to lwtunnels and adds IPv6 tunneling support to ovs. To use IPv6 tunneling, there needs to be a metadata based tunnel net_device created and added to the ovs bridge. Currently, only vxlan is supported by the kernel, with geneve to follow shortly. There's no need nor intent to add a support for this into the vport-vxlan (etc.) compat layer. v3: dropped the last two patches added in v2. ==================== Signed-off-by: -
Jiri Benc authored
Add netlink attributes for IPv6 tunnel addresses. This enables IPv6 support for tunnels. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Jiri Benc authored
Store tunnel protocol (AF_INET or AF_INET6) in sw_flow_key. This field now also acts as an indicator whether the flow contains tunnel data (this was previously indicated by tun_key.u.ipv4.dst being set but with IPv6 addresses in an union with IPv4 ones this won't work anymore). The new field was added to a hole in sw_flow_key. Signed-off-by:
-
Nikolay Aleksandrov authored
When KASAN is enabled the frame size grows > 2048 bytes and we get a warning, so make it smaller. net/bridge/br_netlink.c: In function 'br_fill_info': >> net/bridge/br_netlink.c:1110:1: warning: the frame size of 2160 bytes >> is larger than 2048 bytes [-Wframe-larger-than=] Signed-off-by:
-
David Ahern authored
Add support for filtering neighbor dumps by device by adding the NDA_IFINDEX attribute to the dump request. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-03 This series contains updates to i40e and i40evf, some of which are to resolve more Red Hat bugzilla issues. Jiang Liu updates the i40e and i40evf drivers to use numa_mem_id() instead of numa_node_id() to get the nearest node with memory which better supports memoryless nodes. Anjali fixes an issue from Dan Carpenter <dan.carpenter@oracle.com>, to resolve a memory leak in X722 RSS configuration path, where we should free the memory allocated before exiting. Shannon modifies the drivers to ensure we have the spinlocks before we clear the ARQ and ASQ management registers. In addition, we widen the locked portion insert a sanity check to ensure we are working with safe register values. Mitch fixes an issue where under certain circumstances, we can get an extra VF_RESOURCES message from the PF driver at runtime. When this occurs, we need to parse it because our VSI may have changed and that will affect the relationship with the PF driver. But this parsing also blows away our current MAC address, so resolve the issue by restoring the current MAC address from the netdev struct after we parse the resource message. ==================== Signed-off-by:
-
