- 21 Mar, 2023 4 commits
-
-
Uwe Kleine-König authored
This driver got its last actual change in 2006 and is probably unused as nowbody should use a cardbus to USB adapter any more. If it were still used, the driver was in urgent need for maintainer love. (Explicit kref handling, underdocumented locking, .remove() can return errors ...) Also the link in the (now removed) help text doesn't look actively maintained. According to archive.org it forwarded to http://www.copenhagen-hotel.net/ already back in 2018. So don't waste more time on this driver and just delete it. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230321103638.343886-1-u.kleine-koenig@pengutronix.deSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rob Herring authored
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230320233904.2920197-1-robh@kernel.orgSigned-off-by:
-
Uwe Kleine-König authored
A platform device's .remove() callback is only ever called after .probe() successfully completed. After such a successful call, platform_get_drvdata() doesn't return NULL. Simplify accordingly. Signed-off-by:
-
Uwe Kleine-König authored
- Don't break strings over two (or more) lines - Put the , separating function args at the end of line - Replace if (cond) {} else { ... } by if (!cond) { ... } - Consistently use curly braces in all blocks belonging to the same if if at least one block needs them. - Don't start a new line just for ); There are no semantic changes. Signed-off-by:
-
- 16 Mar, 2023 19 commits
-
-
Konrad Dybcio authored
Document the QCM2290 DWC3 controller. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Acked-by:
-
Emanuele Ghidoli authored
Add support for USB3803 and bypass mode, with this change is also possible to move the component out of bypass mode. In bypass mode the downstream port 3 is connected to the upstream port with low switch resistance R_on. Controlling mode of operations: | RESET_N | BYPASS_N | Mode | -------------------------------- | 0 | 0 | standby | | 1 | 0 | bypass | | 1 | 1 | hub | Datasheet: https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/00001691D.pdfSigned-off-by:
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230313165039.255579-4-francesco@dolcini.itSigned-off-by:
-
Emanuele Ghidoli authored
Refactor code to simplify adding support for USB3803 and bypass mode. Remove static usb3503_reset() and move it to usb3503_switch_mode(), with the addition of the bypass mode we need to drive the various control signals to the expected configuration, not just to assert/release the reset. In addition to that the usb3503_connect() needs to be called only for HUB mode. No functional changes expected nor intended because of this change. Signed-off-by:
-
Emanuele Ghidoli authored
Add support for usb3803, compared to usb3503 it uses a regular USB connection to upstream instead of HSIC, it has an additional low power mode (bypass) and an additional control signal (BYPASS_N). In bypass mode the downstream port 3 is connected to the upstream port with low switch resistance R_on. Signed-off-by:
-
Andy Shevchenko authored
It looks like the driver copied'n'pasted almost random set of headers for its code. Rectify it a bit by removing of_gpio.h that is not only unused, but also will be removed in the future completely. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230313155310.80022-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/usb/typec/tcpm/fusb302.c:1816:34: error: ‘fusb302_dt_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230310222937.315773-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/usb/typec/hd3ss3220.c:284:34: error: ‘dev_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/usb/misc/usb251xb.c:223:35: error: ‘usb2517i_data’ defined but not used [-Werror=unused-const-variable=] drivers/usb/misc/usb251xb.c:215:35: error: ‘usb2517_data’ defined but not used [-Werror=unused-const-variable=] drivers/usb/misc/usb251xb.c:207:35: error: ‘usb2514bi_data’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Richard Leitner <richard.leitner@skidata.com> Link: https://lore.kernel.org/r/20230311173624.263189-7-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/usb/gadget/udc/max3420_udc.c:1312:34: error: ‘max3420_udc_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/usb/gadget/udc/renesas_usb3.c:2811:34: error: ‘usb3_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/usb/gadget/udc/rzv2m_usb3drd.c:120:34: error: ‘rzv2m_usb3drd_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/usb/renesas_usbhs/common.c:535:34: error: ‘usbhs_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/usb/host/max3421-hcd.c:1943:34: error: ‘max3421_of_match_table’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/usb/host/xhci-rcar.c:269:34: error: ‘usb_xhci_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Andy Shevchenko authored
The acpi_evaluate_dsm_typed() provides a way to check the type of the object evaluated by _DSM call. Use it instead of open coded variant. Signed-off-by:
-
Rob Herring authored
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by:
-
Rob Herring authored
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by:
-
Conor Dooley authored
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the use of such symbols on other architectures, convert the Microchip FPGA usb glue layer driver to use the new symbol. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230309204452.969574-6-conor@kernel.orgSigned-off-by:
-
Yalong Zou authored
platform_get_irq() only return non-zero irq number on success, or negative error number on failure. There is no need to check the return value of platform_get_irq() to determine the return value of dwc3_gadget_get_irq(), removing them to solve this problem. Signed-off-by:
Yalong Zou <yalongz@hust.edu.cn> Signed-off-by:
Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230309150815.1884260-1-yalongz@hust.edu.cnSigned-off-by:
-
- 09 Mar, 2023 17 commits
-
-
Peng Fan authored
i.MX8MQ use Synopsys DesignWare USB3 Controller IP, so add the compatible. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Acked-by:
-
Linyu Yuan authored
some __dynamic_array() buffer will only used at trace event output time, change to __get_buf() which will allocate tempary trace seq buffer for output purpose. Signed-off-by:
Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/1677465850-1396-5-git-send-email-quic_linyyuan@quicinc.comSigned-off-by:
-
Linyu Yuan authored
some __dynamic_array() buffer will only used at trace event output time, change to __get_buf() which will allocate tempary trace seq buffer for output purpose. Signed-off-by:
Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/1677465850-1396-4-git-send-email-quic_linyyuan@quicinc.comSigned-off-by:
-
Linyu Yuan authored
some __dynamic_array() buffer will only used at trace event output time, change to __get_buf() which will allocate tempary trace seq buffer for output purpose. Signed-off-by:
-
Linyu Yuan authored
the original design seem have several problems, first during trace event output stage, cdns3_dbg_ring() still refer to priv_ep->trb_pool which data content may changed during runtime, second when ring number is greater than TRBS_PER_SEGMENT, it has no change to show "too big" message, third in cdns3_log_ring event class definition, it allocate too much trace event buffer. change cdns3_dbg_ring() to be called at trace event fast assign time, and change trace buffer real dynamic according ring numbers. Signed-off-by:
-
Yuta Hayama authored
Currently, the USB gadget framework supports only version 1.0 of the MS OS descriptor. OS desc has a field bcdVersion indicating its version, with v1.0 represented by the value 0x100. However, __ffs_do_os_desc_header() was expecting the incorrect value 0x1, so allow the correct value 0x100. The bcdVersion field of the descriptor that is actually sent to the host is set by composite_setup() (in composite.c) to the fixed value 0x100. Therefore, it can be understood that __ffs_do_os_desc_header() is only performing a format check of the OS desc passed to functionfs. If a value other than 0x100 is accepted, there is no effect on communication over the USB bus. Indeed, until now __ffs_do_os_desc_header() has only accepted the incorrect value 0x1, but there was no problem with the communication over the USB bus. However, this can be confusing for functionfs userspace drivers. Since bcdVersion=0x100 is used in actual communication, functionfs should accept the value 0x100. Note that the correct value for bcdVersion in OS desc v1.0 is 0x100, but to avoid breaking old userspace drivers, the value 0x1 is also accepted as an exception. At this time, a message is output to notify the user to fix the userspace driver. Signed-off-by:
Yuta Hayama <hayama@lineo.co.jp> Reviewed-by:
Andrzej Pietrasiewicz <andrzej.p@collabora.com> Link: https://lore.kernel.org/r/290f96db-1877-5137-373a-318e7b4f2dde@lineo.co.jpSigned-off-by:
-
Kang Chen authored
This driver uses the unified memory management api, so replace kzalloc with devm_kzalloc to avoid a memory leak. Reported-by:
Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/all/CAD-N9QX5i5toj8cs7DxBjYWtRGf3ZRnfTAf809sFW6iX0Ktfmw@mail.gmail.comSigned-off-by:
Kang Chen <void0red@gmail.com> Link: https://lore.kernel.org/r/20230225041149.136-2-void0red@gmail.comSigned-off-by:
-
Kang Chen authored
Even an 8-byte kzalloc will fail when we don't have enough memory, so we need a nullptr check and do the cleanup when it fails. Reported-by:
eriri <1527030098@qq.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217081Signed-off-by:
-
Prashanth K authored
Currently we don't change the current value if device isn't in configured state. But in battery charging specification (section 1.2 and 1.4.13), it is mentioned that the device can draw up to 100mA of current if it's in unconfigured state. Hence add vbus draw work in composite_resume to draw 100mA if the device isn't configured. Signed-off-by:
Prashanth K <quic_prashk@quicinc.com> Link: https://lore.kernel.org/r/1677217619-10261-3-git-send-email-quic_prashk@quicinc.comSigned-off-by:
-
Prashanth K authored
Currently we process the suspend interrupt event only if the device is in configured state. Consider a case where device is not configured and got suspend interrupt, in that case our gadget will still use 100mA as composite_suspend didn't happen. But battery charging specification (BC1.2) expects a downstream device to draw less than 2.5mA when unconnected OR suspended. Fix this by removing the condition for processing suspend event, and thus composite_resume would set vbus draw to 2. Fixes: 72704f87 ("dwc3: gadget: Implement the suspend entry event handler") Signed-off-by:
-
Piyush Mehta authored
Some ULPI USB PHY does not support internal VBUS supply, to drive the CPEN pin, which requires the configuration of the ULPI DRVVBUSEXTERNAL bit of OTG_CTRL register. Added 'snps,ulpi-ext-vbus-drv' a DT property to configure the USB2 PHY to drive VBUS with an external supply, by setting the USB2 PHY ULPIEXTVBUSDRV bit[:17] of the GUSB2PHYCFG register to drive VBUS with an external supply. Signed-off-by:
Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20230215093146.5812-3-piyush.mehta@amd.comSigned-off-by:
-
Piyush Mehta authored
Some ULPI USB PHYs do not support an internal vBus supply, to drive the CPEN pin properly, it requires configuration of the ULPI DRVVBUSEXTERNAL bit of the USB ULPI PHY OTG_CTRL register. Added 'snps,ulpi-ext-vbus-drv' DT property to configure the USB2 PHY to drives VBUS with an external supply. When the ULPIEXTVBUSDRV bit is set to '1' in the Global USB2 PHY Configuration registers, PHY drive vBus with an external 5V supply source. Signed-off-by:
-
Rafał Miłecki authored
This binding uses usb-hcd.yaml so replace additionalProperties with unevaluatedProperties to allow generic USB HCD properties. It's how EHCI and XHCI bindings work too. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
-
Rafał Miłecki authored
This binding was originally meant to describe hard-wired USB devices but in some situations we need to describe USB ports. That is needed e.g. if USB port is meant to be used as a trigger source but it can have any device plugged. It's a common case for home routers which have USB ports (with no hard-wired devices) and USB LEDs to indicate ports state. There is no point (and no easy way) to add separate binding covering just USB ports. Adjust existing devices binding to allow describing ports. This fixes: arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: port@1: 'compatible' is a required property From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: port@2: 'compatible' is a required property From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'port@1', 'port@2' were unexpected) From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: port@1: 'compatible' is a required property From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: port@2: 'compatible' is a required property From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'port@1', 'port@2' were unexpected) From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@23000: port@1: 'compatible' is a required property From schema: Documentation/devicetree/bindings/usb/generic-xhci.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@23000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'phy-names', 'phys', 'port@1' were unexpected) From schema: Documentation/devicetree/bindings/usb/generic-xhci.yaml Signed-off-by: -
Krzysztof Kozlowski authored
The DWC3 USB Linux driver and several DTS use extcon property, so document it, even though it is deprecated, to fix warnings like: sm6125-sony-xperia-seine-pdx201.dtb: usb@4ef8800: usb@4e00000: Unevaluated properties are not allowed ('extcon' was unexpected) Signed-off-by: -
Wolfram Sang authored
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20230307163041.3815-12-wsa+renesas@sang-engineering.comSigned-off-by:
-
Wolfram Sang authored
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Reviewed-by:
-
