This reverts commit afcbe252.

The commit in question caused my sc7280-herobrine-herobrine-r1 board
not to boot anymore. This shouldn't be too surprising since the driver
is relying on the name "cqhci".

The issue seems to be that someone decided to change the names of
things when the binding moved from .txt to .yaml. We should go back to
the names that the bindings have historically specified.

For some history, see commit d3392339 ("mmc: cqhci: Update cqhci
memory ioresource name") and commit d79100c9 ("dt-bindings: mmc:
sdhci-msm: Add CQE reg map").

Fixes: afcbe252 ("arm64: dts: qcom: Fix 'reg-names' for sdhci nodes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706144706.1.I48f35820bf3670d54940110462555c2d0a6d5eb2@changeid

Add the (required) vdss-supply property to the DSI PHY node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706145412.1566011-3-dmitry.baryshkov@linaro.org

To ease merging of bindings and dts files, the constants were replaced
with numeric values. Change them back to defined constants.
While we are at it, fix the indentation of these clocks properties to
follow established guidelines.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706145412.1566011-2-dmitry.baryshkov@linaro.org

Add missing DSI clock assignments to properly use DSI PHY clocks as DSI
byte and pixel clock parents.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706145412.1566011-1-dmitry.baryshkov@linaro.org

Add reset to SDHCI controller so it can be reset to avoid timeout issues
after software reset due to bootloader set configuration.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704143554.1180927-2-robimarko@gmail.com

Add device node for CPU-memory BWMON device (bandwidth monitoring) on
SDM845 measuring bandwidth between CPU (gladiator_noc) and Last Level
Cache (memnoc).  Usage of this BWMON allows to remove fixed bandwidth
votes from cpufreq (CPU nodes) thus achieve high memory throughput even
with lower CPU frequencies.
Co-developed-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-5-krzysztof.kozlowski@linaro.org

The ARM timer is usually considered not part of SoC node, just like
other ARM designed blocks (PMU, PSCI).  This fixes dtbs_check warning:

arch/arm64/boot/dts/qcom/ipq8072-ax9000.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'}
	From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Moved node after "soc" for alphabetical ordering]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704113318.623102-1-robimarko@gmail.com

Both vdda-1p2-supply and vdda-0p9-supply regulators are controlled
by dp combo phy. Therefore remove them from dp controller.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1656690436-15221-1-git-send-email-quic_khsieh@quicinc.com

Switch from the flat PC idle states of sdm845 to OSI hierarchical idle
states. The exceptions are the cheza plaftorms, which need to remain with
PC idle states. So in order allow all the other platforms to switch,
while cheza platforms to remain the same, replace the PC idle states with
the OSI ones in the main SDM845 dtsi, and then override the inherited OSI
states with PC ones, delete inherited psci cpus nodes, domain idle states
and power domain properties.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220630101403.1888541-1-abel.vesa@linaro.org

First device specific compatible, then general one.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626183247.142776-2-david@ixit.cz

Adds initial support for the LG G7 (judyln) and
LG V35 (judyp) phones.

Currently supported features:

 - Display via simplefb (panel driver is WIP)
 - Keys
 - Micro SD card
 - Modem (not tested much, but initialises)
 - UFS (crashes during intensive workloads, may need quirks)
 - USB in peripheral mode

Notable missing features:

 - Enabling WiFi causes a remoteproc crash, so it's disabled here.
   Needs to be debugged - ideas welcome!
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Tested-by: Gregari Ivanov <llamashere@posteo.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626164536.16011-2-newbie13xd@gmail.com

Add XO clock source to the RPM clock controller.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-5-dmitry.baryshkov@linaro.org

Add missing GCC clock sources. This includes PCIe and USB PIPE and UFS
symbol clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-4-dmitry.baryshkov@linaro.org

The commit 82d61e19 ("arm64: dts: qcom: msm8996: Move '#clock-cells'
to QMP PHY child node") moved the '#clock-cells' properties to the child
nodes. However it missed the fact that the property must have been set
to <0> (as all pipe clocks use of_clk_hw_simple_get as the xlate
function. Also the mentioned commit didn't add '#clock-cells' properties
to second and third PCIe PHY nodes. Correct both these mistakes:

- Set '#clock-cells' to <0>,
- Add the property to pciephy_1 and pciephy_2 nodes.

Fixes: 82d61e19 ("arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-3-dmitry.baryshkov@linaro.org

Enables the RGB notification LED on the SHIFT 6mq (sdm845-shift-axolotl)
with the Qualcomm Light Pulse Generator bindings by Bjorn Andersson [1].
Patches are merged in for-next branch of linux-leds.
Tested these changes on the SHIFT 6mq.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git/commit/?h=for-next&id=a8e53db46f19f67be6a26488aafb7d10c78e33bdSigned-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Alexander Martinz <amartinz@shiftphones.com>
Tested-by: Alexander Martinz <amartinz@shiftphones.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220512054439.13971-1-me@dylanvanassche.be

These config values have been extracted from CodeLinaro's most recent
trinket/sm6125 tag:
https://git.codelinaro.org/clo/la/kernel/msm-4.14/-/blob/LA.UM.9.11.r1-05600-NICOBAR.QSSI12.0/arch/arm64/boot/dts/qcom/trinket.dtsiSigned-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-3-marijn.suijten@somainline.org

According to qcom,sm6125-pinctrl.yaml all nodes inside the tlmm must be
suffixed by -state:

    qcom/sm6125-sony-xperia-seine-pdx201.dtb: pinctrl@500000: 'sdc2-off', 'sdc2-on' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'

The label names have been updated to match, going from sdc2_state_X to
sdc2_X_state.

Fixes: cff4bbaf ("arm64: dts: qcom: Add support for SM6125")
Fixes: 82e17838 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-2-marijn.suijten@somainline.org

Both the sdc2-on and sdc2-off pinctrl nodes are used by the
sdhci@4784000 node in sm6125.dtsi.  Surprisingly sdc2-off is defined in
sm6125, yet its sdc2-on counterpart is only defined in board-specific DT
for the Sony Seine PDX201 board/device resulting in an "undefined label
&sdc2_state_on" error if sm6125.dtsi were included elsewhere.
This sm6125 base dtsi should not rely on externally defined labels; the
properties referencing it should then also be written externally.
Since the sdc2-on pin configuration is board-independent just like
sdc2-off, move it from seine-pdx201.dts into sm6125.dtsi.

The SDCard-detect pin (gpio98) is however board-specific, and remains as
an overwrite in seine-pdx201.dts for both the on and off state.

As a drive-by cleanup, reorder bias- and drive-strength properties.

Fixes: cff4bbaf ("arm64: dts: qcom: Add support for SM6125")
Fixes: 82e17838 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-1-marijn.suijten@somainline.org

The db820c has 4 "user LEDs", all connected to the PMI8994. The first
three are connected to the three current sinks provided by the TRILED
and the fourth is connected to MPP2.

By utilizing the DTEST bus the MPP is fed the control signal from the
fourth LPG block, providing a consistent interface to the user.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-5-bjorn.andersson@linaro.org

The pmi8994 has 4 multi-purpose-pins, add these to the definition.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-4-bjorn.andersson@linaro.org

The DB845c has 4 "user LEDs", the last one is already supported as it's
just wired to a gpio. Now that the LPG binding is in place we can wire
up the other 3 LEDs as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-3-bjorn.andersson@linaro.org

Add PWM/LPG nodes to the PMICs currently supported by the binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-2-bjorn.andersson@linaro.org

Replace &rpmhpd power domain integers with their respective defines
in order to improve legibility.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706152830.2021197-1-robert.foss@linaro.org

Add the dispcc clock-controller DT node for sm8350.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706154337.2026269-6-robert.foss@linaro.org

The change adds description of Qualcomm SM8450 camera clock controller.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062622.2757831-3-vladimir.zapolskiy@linaro.org

The change adds device tree bindings for camera clock controller
found on SM8450 SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062622.2757831-2-vladimir.zapolskiy@linaro.org

Add sm8350 DISPCC bindings, which are simply a symlink to the sm8250
bindings. Update the documentation with the new compatible.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706154337.2026269-4-robert.foss@linaro.org

Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SM8350 SoCs.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmityr.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706154337.2026269-2-robert.foss@linaro.org

Add interconnect providers for the multiple NoCs available on the platform,
and assign interconnects used by some blocks.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211021132329.234942-6-y.oudjana@protonmail.com

This merges the 'qcom-arm64-fixes-for-5.19' tag into arm64-for-5.20 to
handle the merge conflict related to the header file changes in
sc7180-trogdor.

Trogdor devices that have a detachable keyboard still have a
non-detachable keyboard input device present because we include the
cros-ec-keyboard.dtsi snippet in the top-level sc7180-trogdor.dtsi file
that every variant board includes. We do this because the
keyboard-controller node also provides some buttons like the power
button and volume buttons. Unfortunately, this means we register a
keyboard input device that doesn't do anything on boards with a
detachable keyboard.

Change the node's compatible on detachables to the newly introduced
"google,cros-ec-keyb-switches" compatible to indicate that there are
only switches and no keyboard to register. Similarly, move the keyboard
include that defines the keyboard-controller node out of
sc7180-trogdor.dtsi to boards that actually have a keyboard so that the
matrix properties are not defined on boards with the switches
compatible. Future boards can either use the include approach or the
node definition approach to describe a keyboard with possible switches
or just some switches.

Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: "Joseph S. Barrera III" <joebar@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220627212802.3593012-1-swboyd@chromium.org

Per schema it should be nand-controller@79b0000 instead of nand@79b0000.
Fix it to match nand-controller.yaml requirements.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220621120642.518575-1-robimarko@gmail.com

Both a53pll and rpmcc make use of xo as a clock parent. Add it to the
respective device nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620010519.1533364-1-dmitry.baryshkov@linaro.org

Add device nodes for the DSI1, second DSI interface found on
MSM8996/APQ8096 platforms. For example on db820c it is routed to the
secondary HS expansion connector.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220617103652.606250-1-dmitry.baryshkov@linaro.org

Add MDP_CLK ("core") clock to the mdss device to allow MDSS driver to
access HW_REV/etc registers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220615135935.87381-5-dmitry.baryshkov@linaro.org

This is an SMMU for the adreno gpu, and adding this compatible lets
the driver use per-fd page tables, which are required for security
between GPU clients.
Signed-off-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[bjorn: Move arm,smmu-500 last, per Dmitry's request]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220614230136.3726047-2-emma@anholt.net

A3, A5 and most of the Samsung phones with MSM8916 SoC use GPIO pin 13 for
touchscreen interrupts. Add touchscreen pinctrl to a2015 common dtsi.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220610175332.104154-1-linmengbo0689@protonmail.com

The HDMI driver doesn't use the phy-names to identify the PHY. Different
Qualcomm platforms have used different names for the PHY. So, we are
deprecating phy-names propertty of the HDMI device and dropping them
from existing DTs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220609122350.3157529-15-dmitry.baryshkov@linaro.org