On RDMA errors, transport should disconnect the RDMA CM connection. This
will notify the upper layer, and it will attempt transport reconnect.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>

During transport reconnect, other processes may have registered memory
and blocked on transport. This creates a deadlock situation because the
transport resources can't be freed, and reconnect is blocked.

Fix this by returning to upper layer on timeout. Before returning,
transport status is set to reconnecting so other processes will release
memory registration resources.

Upper layer will retry the reconnect. This is not in fast I/O path so
setting the timeout to 5 seconds.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>

Change the following message (which can occur on reconnect) from
a warning to an FYI message.  It is confusing to users.

   [58360.523634] CIFS VFS: Free previous auth_key.response = 00000000a91cdc84

By default this message won't show up on reconnect unless the user bumps
up the log level to include FYI messages.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

STATUS_FS_DRIVER_REQUIRED is expected when DFS is not turned
on on the server.  Do not log it on DFS referral response.
It clutters the dmesg log unnecessarily at mount time.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com
Reviewed-by: Ronnie sahlberg <lsahlber@redhat.com>

Modify end of cifs_root_iget function in fs/cifs/inode.c to call
free_xid(xid) instead of _free_xid(xid), thereby allowing debug
notification of this action when enabled.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Steve French <smfrench@gmail.com>

SMB3.1.1 is a very important dialect, with much improved security.
We can remove the ExPERIMENTAL comments about it. It is widely
supported by servers.
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>

SMB3.1.1 tree connect was only being signed when signing was mandatory
but needs to always be signed (for non-guest users).

See MS-SMB2 section 3.2.4.1.1
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>

We can not use the standard sg_set_buf() fucntion since when
CONFIG_DEBUG_SG=y this adds a check that will BUG_ON for cifs.ko
when we pass it an object from the stack.

Create a new wrapper smb2_sg_set_buf() which avoids doing that particular check
and use it for smb3 encryption instead.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>

It seems this is a copy-paste error and that the proper variable to use
in this particular case is _sha512_ instead of _md5_.

Addresses-Coverity-ID: 1465358 ("Copy-paste error")
Fixes: 1c6614d229e7 ("CIFS: add sha512 secmech")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>

SMB3.11 clients must implement pre-authentification integrity.

* new mechanism to certify requests/responses happening before Tree
  Connect.
* supersedes VALIDATE_NEGOTIATE
* fixes signing for SMB3.11
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

* prepare for SMB3.11 pre-auth integrity
* enable sha512 when SMB311 is enabled in Kconfig
* add sha512 as a soft dependency
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

shash and sdesc and always allocated and freed together.
* abstract this in new functions cifs_alloc_hash() and cifs_free_hash().
* make smb2/3 crypto allocation independent from each other.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>

Remove references to two obsolete /proc/fs/cifs parameters
and update for a few minor SMB3 features.
Signed-off-by: Steve French <smfrench@gmail.com>

Update list of items still TODO in cifs.ko
Signed-off-by: Steve French <smfrench@gmail.com>

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>

Trivial fix to spelling mistake in log_rdma_send and log_rdma_mr
message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>

Pull perf fixes from Ingo Molnar:
 "Two fixlets"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/hwbp: Simplify the perf-hwbp code, fix documentation
  perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUs

Pull x86 fixes from Ingo Molnar:
 "Two UV platform fixes, and a kbuild fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/UV: Fix critical UV MMR address error
  x86/platform/uv/BAU: Add APIC idt entry
  x86/purgatory: Avoid creating stray .<pid>.d files, remove -MD from KBUILD_CFLAGS

Pull x86 PTI fixes from Ingo Molnar:
 "Two fixes: a relatively simple objtool fix that makes Clang built
  kernels work with ORC debug info, plus an alternatives macro fix"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Fixup alternative_call_2
  objtool: Add Clang support

Merge tag 'kbuild-fixes-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix missed rebuild of TRIM_UNUSED_KSYMS

 - fix rpm-pkg for GNU tar >= 1.29

 - include scripts/dtc/include-prefixes/* to kernel header deb-pkg

 - add -no-integrated-as option ealier to fix building with Clang

 - fix netfilter Makefile for parallel building

* tag 'kbuild-fixes-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  netfilter: nf_nat_snmp_basic: add correct dependency to Makefile
  kbuild: rpm-pkg: Support GNU tar >= 1.29
  builddeb: Fix header package regarding dtc source links
  kbuild: set no-integrated-as before incl. arch Makefile
  kbuild: make scripts/adjust_autoksyms.sh robust against timestamp races

Pull networking fixes from David Miller:

 1) Fix RCU locking in xfrm_local_error(), from Taehee Yoo.

 2) Fix return value assignments and thus error checking in
    iwl_mvm_start_ap_ibss(), from Johannes Berg.

 3) Don't count header length twice in vti4, from Stefano Brivio.

 4) Fix deadlock in rt6_age_examine_exception, from Eric Dumazet.

 5) Fix out-of-bounds access in nf_sk_lookup_slow{v4,v6}() from Subash
    Abhinov.

 6) Check nladdr size in netlink_connect(), from Alexander Potapenko.

 7) VF representor SQ numbers are 32 not 16 bits, in mlx5 driver, from
    Or Gerlitz.

 8) Out of bounds read in skb_network_protocol(), from Eric Dumazet.

 9) r8169 driver sets driver data pointer after register_netdev() which
    is too late. Fix from Heiner Kallweit.

10) Fix memory leak in mlx4 driver, from Moshe Shemesh.

11) The multi-VLAN decap fix added a regression when dealing with device
    that lack a MAC header, such as tun. Fix from Toshiaki Makita.

12) Fix integer overflow in dynamic interrupt coalescing code. From Tal
    Gilboa.

13) Use after free in vrf code, from David Ahern.

14) IPV6 route leak between VRFs fix, also from David Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  net: mvneta: fix enable of all initialized RXQs
  net/ipv6: Fix route leaking between VRFs
  vrf: Fix use after free and double free in vrf_finish_output
  ipv6: sr: fix seg6 encap performances with TSO enabled
  net/dim: Fix int overflow
  vlan: Fix vlan insertion for packets without ethernet header
  net: Fix untag for vlan packets without ethernet header
  atm: iphase: fix spelling mistake: "Receiverd" -> "Received"
  vhost: validate log when IOTLB is enabled
  qede: Do not drop rx-checksum invalidated packets.
  hv_netvsc: enable multicast if necessary
  ip_tunnel: Resolve ipsec merge conflict properly.
  lan78xx: Crash in lan78xx_writ_reg (Workqueue: events lan78xx_deferred_multicast_write)
  qede: Fix barrier usage after tx doorbell write.
  vhost: correctly remove wait queue during poll failure
  net/mlx4_core: Fix memory leak while delete slave's resources
  net/mlx4_en: Fix mixed PFC and Global pause user control requests
  net/smc: use announced length in sock_recvmsg()
  llc: properly handle dev_queue_xmit() return value
  strparser: Fix sign of err codes
  ...

In mvneta_port_up() we enable relevant RX and TX port queues by write
queues bit map to an appropriate register.

q_map must be ZERO in the beginning of this process.
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Donald reported that IPv6 route leaking between VRFs is not working.
The root cause is the strict argument in the call to rt6_lookup when
validating the nexthop spec.

ip6_route_check_nh validates the gateway and device (if given) of a
route spec. It in turn could call rt6_lookup (e.g., lookup in a given
table did not succeed so it falls back to a full lookup) and if so
sets the strict argument to 1. That means if the egress device is given,
the route lookup needs to return a result with the same device. This
strict requirement does not work with VRFs (IPv4 or IPv6) because the
oif in the flow struct is overridden with the index of the VRF device
to trigger a match on the l3mdev rule and force the lookup to its table.

The right long term solution is to add an l3mdev index to the flow
struct such that the oif is not overridden. That solution will not
backport well, so this patch aims for a simpler solution to relax the
strict argument if the route spec device is an l3mdev slave. As done
in other places, use the FLOWI_FLAG_SKIP_NH_OIF to know that the
RT6_LOOKUP_F_IFACE flag needs to be removed.

Fixes: ca254490 ("net: Add VRF support to IPv6 stack")
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Miguel reported an skb use after free / double free in vrf_finish_output
when neigh_output returns an error. The vrf driver should return after
the call to neigh_output as it takes over the skb on error path as well.

Patch is a simplified version of Miguel's patch which was written for 4.9,
and updated to top of tree.

Fixes: 8f58336d ("net: Add ethernet header for pass through VRF device")
Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enabling TSO can lead to abysmal performances when using seg6 in
encap mode, such as with the ixgbe driver. This patch adds a call to
iptunnel_handle_offloads() to remove the encapsulation bit if needed.

Before:
root@comp4-seg6bpf:~# iperf3 -c fc00::55
Connecting to host fc00::55, port 5201
[  4] local fc45::4 port 36592 connected to fc00::55 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-1.00   sec   196 KBytes  1.60 Mbits/sec   47   6.66 KBytes
[  4]   1.00-2.00   sec   304 KBytes  2.49 Mbits/sec  100   5.33 KBytes
[  4]   2.00-3.00   sec   284 KBytes  2.32 Mbits/sec   92   5.33 KBytes

After:
root@comp4-seg6bpf:~# iperf3 -c fc00::55
Connecting to host fc00::55, port 5201
[  4] local fc45::4 port 43062 connected to fc00::55 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-1.00   sec  1.03 GBytes  8.89 Gbits/sec    0    743 KBytes
[  4]   1.00-2.00   sec  1.03 GBytes  8.87 Gbits/sec    0    743 KBytes
[  4]   2.00-3.00   sec  1.03 GBytes  8.87 Gbits/sec    0    743 KBytes
Reported-by: Tom Herbert <tom@quantonium.net>
Fixes: 6c8702c6 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ceph fix from Ilya Dryomov:
 "A fix for a dio-enabled loop on ceph deadlock from Zheng, marked for
  stable"

* tag 'ceph-for-4.16-rc8' of git://github.com/ceph/ceph-client:
  ceph: only dirty ITER_IOVEC pages for direct read

Pull KVM fixes from Radim Krčmář:
 "PPC:
   - Fix a bug causing occasional machine check exceptions on POWER8
     hosts (introduced in 4.16-rc1)

  x86:
   - Fix a guest crashing regression with nested VMX and restricted
     guest (introduced in 4.16-rc1)

   - Fix dependency check for pv tlb flush (the wrong dependency that
     effectively disabled the feature was added in 4.16-rc4, the
     original feature in 4.16-rc1, so it got decent testing)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix pv tlb flush dependencies
  KVM: nVMX: sync vmcs02 segment regs prior to vmx_set_cr0
  KVM: PPC: Book3S HV: Fix duplication of host SLB entries

Pull i2c fix from Wolfram Sang:
 "A simple but worthwhile I2C driver fix for 4.16"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i2c-stm32f7: fix no check on returned setup

Pull sound fixes from Takashi Iwai:
 "Very small fixes (all one-liners) at this time.

  One fix is for a PCM core stuff to correct the mmap behavior on
  non-x86. It doesn't show on most machines but mostly only for exotic
  non-interleaved formats"

* tag 'sound-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: pcm: potential uninitialized return values
  ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()
  ALSA: usb-audio: Add native DSD support for TEAC UD-301

When calculating difference between samples, the values
are multiplied by 100. Large values may cause int overflow
when multiplied (usually on first iteration).
Fixed by forcing 100 to be of type unsigned long.

Fixes: 4c4dbb4a ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Toshiaki Makita says:

====================
Fix vlan tag handling for vlan packets without ethernet headers

Eric Dumazet reported syzbot found a new bug which leads to underflow of
size argument of memmove(), causing crash[1]. This can be triggered by tun
devices.

The underflow happened because skb_vlan_untag() did not expect vlan packets
without ethernet headers, and tun can produce such packets.
I also checked vlan_insert_inner_tag() and found a similar bug.

This series fixes these problems.

[1] https://marc.info/?l=linux-netdev&m=152221753920510&w=2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In some situation vlan packets do not have ethernet headers. One example
is packets from tun devices. Users can specify vlan protocol in tun_pi
field instead of IP protocol. When we have a vlan device with reorder_hdr
disabled on top of the tun device, such packets from tun devices are
untagged in skb_vlan_untag() and vlan headers will be inserted back in
vlan_insert_inner_tag().

vlan_insert_inner_tag() however did not expect packets without ethernet
headers, so in such a case size argument for memmove() underflowed.

We don't need to copy headers for packets which do not have preceding
headers of vlan headers, so skip memmove() in that case.
Also don't write vlan protocol in skb->data when it does not have enough
room for it.

Fixes: cbe7128c ("vlan: Fix out of order vlan headers with reorder header off")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

In some situation vlan packets do not have ethernet headers. One example
is packets from tun devices. Users can specify vlan protocol in tun_pi
field instead of IP protocol, and skb_vlan_untag() attempts to untag such
packets.

skb_vlan_untag() (more precisely, skb_reorder_vlan_header() called by it)
however did not expect packets without ethernet headers, so in such a case
size argument for memmove() underflowed and triggered crash.

====
BUG: unable to handle kernel paging request at ffff8801cccb8000
IP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43
PGD 9cee067 P4D 9cee067 PUD 1d9401063 PMD 1cccb7063 PTE 2810100028101
Oops: 000b [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 17663 Comm: syz-executor2 Not tainted 4.16.0-rc7+ #368
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43
RSP: 0018:ffff8801cc046e28 EFLAGS: 00010287
RAX: ffff8801ccc244c4 RBX: fffffffffffffffe RCX: fffffffffff6c4c2
RDX: fffffffffffffffe RSI: ffff8801cccb7ffc RDI: ffff8801cccb8000
RBP: ffff8801cc046e48 R08: ffff8801ccc244be R09: ffffed0039984899
R10: 0000000000000001 R11: ffffed0039984898 R12: ffff8801ccc244c4
R13: ffff8801ccc244c0 R14: ffff8801d96b7c06 R15: ffff8801d96b7b40
FS:  00007febd562d700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8801cccb8000 CR3: 00000001ccb2f006 CR4: 00000000001606e0
DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Call Trace:
 memmove include/linux/string.h:360 [inline]
 skb_reorder_vlan_header net/core/skbuff.c:5031 [inline]
 skb_vlan_untag+0x470/0xc40 net/core/skbuff.c:5061
 __netif_receive_skb_core+0x119c/0x3460 net/core/dev.c:4460
 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4627
 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4701
 netif_receive_skb+0xae/0x390 net/core/dev.c:4725
 tun_rx_batched.isra.50+0x5ee/0x870 drivers/net/tun.c:1555
 tun_get_user+0x299e/0x3c20 drivers/net/tun.c:1962
 tun_chr_write_iter+0xb9/0x160 drivers/net/tun.c:1990
 call_write_iter include/linux/fs.h:1782 [inline]
 new_sync_write fs/read_write.c:469 [inline]
 __vfs_write+0x684/0x970 fs/read_write.c:482
 vfs_write+0x189/0x510 fs/read_write.c:544
 SYSC_write fs/read_write.c:589 [inline]
 SyS_write+0xef/0x220 fs/read_write.c:581
 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x454879
RSP: 002b:00007febd562cc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007febd562d6d4 RCX: 0000000000454879
RDX: 0000000000000157 RSI: 0000000020000180 RDI: 0000000000000014
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000006b0 R14: 00000000006fc120 R15: 0000000000000000
Code: 90 90 90 90 90 90 90 48 89 f8 48 83 fa 20 0f 82 03 01 00 00 48 39 fe 7d 0f 49 89 f0 49 01 d0 49 39 f8 0f 8f 9f 00 00 00 48 89 d1 <f3> a4 c3 48 81 fa a8 02 00 00 72 05 40 38 fe 74 3b 48 83 ea 20
RIP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: ffff8801cc046e28
CR2: ffff8801cccb8000
====

We don't need to copy headers for packets which do not have preceding
headers of vlan headers, so skip memmove() in that case.

Fixes: 4bbb3e0e ("net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a page is already locked, attempting to dirty it leads to a deadlock
in lock_page().  This is what currently happens to ITER_BVEC pages when
a dio-enabled loop device is backed by ceph:

  $ losetup --direct-io /dev/loop0 /mnt/cephfs/img
  $ xfs_io -c 'pread 0 4k' /dev/loop0

Follow other file systems and only dirty ITER_IOVEC pages.

Cc: stable@kernel.org
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Merge tag 'for-4.16/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix a DM multipath regression introduced in a v4.16-rc6 commit:
   restore support for loading, and attaching, scsi_dh modules during
   multipath table load. Otherwise some users may find themselves unable
   to boot, as was reported today:

     https://marc.info/?l=linux-scsi&m=152231276114962&w=2

 - Fix a DM core ioctl permission check regression introduced in a
   v4.16-rc5 commit.

* tag 'for-4.16/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: fix dropped return code from dm_get_bdev_for_ioctl
  dm mpath: fix support for loading scsi_dh modules during table load

Pull rdma fixes from Jason Gunthorpe:
 "It has been fairly silent lately on our -rc front. Big queue of
  patches on the mailing list going to for-next though.

  Bug fixes:
   - qedr driver bugfixes causing application hangs, wrong uapi errnos,
     and a race condition
   - three syzkaller found bugfixes in the ucma uapi

  Regression fixes for things introduced in 4.16:
   - Crash on error introduced in mlx5 UMR flow
   - Crash on module unload/etc introduced by bad interaction of
     restrack and mlx5 patches this cycle
   - Typo in a two line syzkaller bugfix causing a bad regression
   - Coverity report of nonsense code in hns driver"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/ucma: Introduce safer rdma_addr_size() variants
  RDMA/hns: ensure for-loop actually iterates and free's buffers
  RDMA/ucma: Check that device exists prior to accessing it
  RDMA/ucma: Check that device is connected prior to access it
  RDMA/rdma_cm: Fix use after free race with process_one_req
  RDMA/qedr: Fix QP state initialization race
  RDMA/qedr: Fix rc initialization on CNQ allocation failure
  RDMA/qedr: fix QP's ack timeout configuration
  RDMA/ucma: Correct option size check using optlen
  RDMA/restrack: Move restrack_clean to be symmetrical to restrack_init
  IB/mlx5: Don't clean uninitialized UMR resources

Pull MTD fixes from Boris Brezillon:
 "Two fixes, one in the atmel NAND driver and another one in the
  CFI/JEDEC code.

  Summary:

   - Fix a bug in Atmel ECC engine driver

   - Fix a bug in the CFI/JEDEC driver"

* tag 'mtd/fixes-for-4.16' of git://git.infradead.org/linux-mtd:
  mtd: jedec_probe: Fix crash in jedec_read_mfr()
  mtd: nand: atmel: Fix get_sectorsize() function

dm_get_bdev_for_ioctl()'s return of 0 or 1 must be the result from
prepare_ioctl (1 means the ioctl was issued to a partition, 0 means it
wasn't).  Unfortunately commit 519049af ("dm: use blkdev_get rather
than bdgrab when issuing pass-through ioctl") reused the variable 'r'
to store the return from blkdev_get() that follows prepare_ioctl()
-- whereby dropping prepare_ioctl()'s result on the floor.

This can lead to an ioctl or persistent reservation being issued to a
partition going unnoticed, which implies the extra permission check for
CAP_SYS_RAWIO is skipped.

Fix this by using a different variable to store blkdev_get()'s return.

Fixes: 519049af ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl")
Reported-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>