- 05 Sep, 2019 4 commits
-
-
Beatriz Martins de Carvalho authored
Fix checkpath error "CHECK: Blank lines aren't necessary after an open brace '{'" in rtllib.h:482. Signed-off-by:Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com> Link: https://lore.kernel.org/r/20190904210326.17983-1-martinsdecarvalhobeatriz@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YueHaibing authored
Use kmemdup rather than duplicating its implementation Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190905030047.88401-1-yuehaibing@huawei.comSigned-off-by:
-
YueHaibing authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
-
YueHaibing authored
Remove duplicated include. Signed-off-by:
-
- 04 Sep, 2019 5 commits
-
-
zhong jiang authored
kfree has taken the null check in account. hence it is unnecessary to add the null check before kfree the object. Just remove it. Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Link: https://lore.kernel.org/r/1567591408-24268-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
-
Dan Carpenter authored
These two error paths need to unlock before we can return. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20190904095908.GA7007@mwandaSigned-off-by:
-
Pratik Shinde authored
while filling the linux inode, using switch-case statement to check the type of inode. switch-case statement looks more clean here. Signed-off-by:
Pratik Shinde <pratikshinde320@gmail.com> Reviewed-by:
Gao Xiang <gaoxiang25@huawei.com> Link: https://lore.kernel.org/r/20190830095615.10995-1-pratikshinde320@gmail.comSigned-off-by:
-
Valentin Vidic authored
Fixes checkpatch.pl warnings: CHECK: Comparison to NULL could be written "expr" CHECK: Comparison to NULL could be written "!expr" Signed-off-by:
Valentin Vidic <vvidic@valentin-vidic.from.hr> Link: https://lore.kernel.org/r/20190903205659.18856-1-vvidic@valentin-vidic.from.hrSigned-off-by:
-
zhong jiang authored
Use kzfree instead of memset() + kfree(). Signed-off-by:
-
- 03 Sep, 2019 23 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new device support, cleanups and features for IIO in the 5.4 cycle Revised pull request to fix up a missing Signed-off-by and roll in a fix in the lsm9ds1 support after I broke it when applying. Revised again because the fix changed a hash meaning a fix that previously followed it now had the wrong fixes tag. A few fixes in here that could have gone a faster path but aren't quite worth the rush for 5.3. New device support * ad7606 - Support the ad7606b which adds a software controlled mode alongside the pin controlled only approach of the ad7606. Including dt-bindings. * lsm6dsx - Add support for the gyro and accelerometer part of the lsm9ds1 which is a compound device also including a magnetometer (st_sensors driver). Includes bindings and precursor rework of the driver. Features * ad7192 - Add support for low pass filter control. - DT binding docs. Cleanups and minor fixes * MAINTAINERS - Fix a typo in a path. - Add entry for ad7606 * ad5380 - Fix a failure to dereference a pointer before atempting to assign the value. * ad7192 - Drop platform data as not used in mainline and we now have full DT bindings. * ad7606 - YAML conversion for dt-bindings. * adis16240 - Rework write_raw to make it more readable using GENMASK. * adis16460 - Fix and issue with an unsigned variable holding potential negatives. * cros_ec - Fix missing default of calibration vector so that we get 'something' before calibration is complete on a given axis. * hid-sensors - Use int_pow instead of opencoding. * isl29501 - rename dt-binding docs to include renesas inline with other renesas parts and general current convention. * kxcjk1013 - Improve comments on the 'unusual' ACPI ids used to identify which sensor is which in certain laptops. * lsm6dsx - Add one bit to the fifo status masks for a number of parts. - Drop a reserved entry from the sensitivity values to tidy up interface. - Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier to relate to the datasheet and consistent with other parts supported. * max1027 - Use device managed APIs to avoid manual error handling and cleanup. * rfd77402 - Typo in Kconfig help. * sc27xx - Switch to polling mode from interrupts as interrupt handling typically to slow for very short sleeps. * st-sensors - Fix some missing selects for regmap. * tools - Add a .gitignore containing the binary outputs. * tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits) iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1 iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1 iio: cros_ec: set calibscale for 3d MEMS to unit vector iio: dac: ad5380: fix incorrect assignment to val iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1 iio: imu: st_lsm6dsx: move register definitions to sensor_settings struct iio: imu: st_lsm6dsx: introduce update_fifo function pointer dt-bindings: iio: light: isl29501: Rename bindings documentation file Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section iio: st_sensors: Fix build error dt-bindings: iio: adc: Add AD7606B ADC documentation dt-bindings: iio: adc: Migrate AD7606 documentation to yaml MAINTAINERS: Add Beniamin Bia for AD7606 driver iio: adc: ad7606: Add support for AD7606B ADC tools: iio: add .gitignore iio: adc: sc27xx: Change to polling mode to read data iio: hid-sensor-attributes: Convert to use int_pow() iio: adc: max1027: Use device-managed APIs ...
-
Lorenzo Bianconi authored
Rely on IIO_G_TO_M_S_2 macro for LSM9DS1 accelerometer gain definitions Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Lorenzo Bianconi authored
Get rid of invalid sensitivity value for LSM9DS1 gyro sensor Fixes: 52f4b1f1 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1") Signed-off-by:
-
Valentin Vidic authored
Replace with bool where it makes sense. Also drop unused local variable lossy in fat_find_dir_entry. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Valentin Vidic authored
Fixes checkpatch.pl warnings: CHECK: 'consistancy' may be misspelled - perhaps 'consistency'? CHECK: 'stuct' may be misspelled - perhaps 'struct'? Signed-off-by:
-
Valentin Vidic authored
Fixes checkpatch.pl warnings: CHECK: Unbalanced braces around else statement CHECK: braces {} should be used on all arms of this statement Signed-off-by: -
Gwendal Grignou authored
By default, set the calibscale vector to unit vector. When calibrating one axis, the other axis calibrations are sent as well. If left to 0, sensor data from uncalibrated axis are zero'ed out until all axis are calibrated. Fixes: ed1f2e85 ("iio: cros_ec: Add calibscale for 3d MEMS ") Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
-
Colin Ian King authored
Currently the pointer val is being incorrectly incremented instead of the value pointed to by val. Fix this by adding in the missing * indirection operator. Addresses-Coverity: ("Unused value") Fixes: c03f2c53 ("staging:iio:dac: Add AD5380 driver") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
mario tesi authored
According to the latest version of datasheet the mask for number of unread sensor data in FIFO_STATUS registers has been extended to 10 bits The devices involved are: - LSM6DSO - LSM6DSOX - ASM330LHH - LSM6DSR - ISM330DHCX Signed-off-by:
mario tesi <mario.tesi@st.com> Acked-by:
-
Martin Kepplinger authored
Note the binding is st,lsm9ds1-imu. This device is effectively two separate devices in the same package. (separate addreses, chip selects etc) The magnetometer is already supported as lsm9ds1-mag. imu may not be the best name but it's the best that anyone has yet come up with for a gyro and accel part. Signed-off-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Martin Kepplinger authored
The LSM9DS1's accelerometer / gyroscope unit and it's magnetometer (separately supported in iio/magnetometer/st_magn*) are located on a separate i2c addresses on the bus. For the datasheet, see https://www.st.com/resource/en/datasheet/lsm9ds1.pdf Treat it just like the LSM6* devices and, despite it's name, hook it up to the st_lsm6dsx driver, using it's basic functionality. accelerometer and gyroscope are not independently clocked. It runs at the gyro frequencies if both are enabled, see chapter 7.12 of the datasheet. We could have handled this as a single IIO device but we have split it up to be more consistent with the other more flexible devices. Despite supporting and testing the LSM9DS1, we call the gyro channels iio_chan_spec struct "st_lsm6ds0_gyro_channels" because the register description is equal. This suggests that supporting LSM6DS0 should be trivial to do. Signed-off-by:
-
Rasmus Villemoes authored
Currently, __inline is #defined as inline in compiler_types.h, so this should not change functionality. It is preparation for removing said #define. While at it, change some "inline static" to the customary "static inline" order. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20190830231527.22304-2-linux@rasmusvillemoes.dkSigned-off-by:
-
Ivan Safonov authored
skb_put_data is shorter and clear. Signed-off-by:
Ivan Safonov <insafonov@gmail.com> Link: https://lore.kernel.org/r/20190901195301.GA16043@alphaSigned-off-by:
-
Harsh Jain authored
It fixed following warning in kpc2000 driver "constant XXXX is so big it is unsigned long" Signed-off-by:
Harsh Jain <harshjain32@gmail.com> Link: https://lore.kernel.org/r/20190831115532.2398-1-harshjain32@gmail.comSigned-off-by:
-
Colin Ian King authored
A call to FAT_getblk is missing a null return check which can lead to a null pointer dereference. Fix this by adding a null check to match all the other FAT_getblk return sanity checks. Addresses-Coverity: ("Dereference null return") Fixes: c48c9f7f ("staging: exfat: add exfat filesystem code to staging") Signed-off-by: -
Dan Carpenter authored
The problem is in gb_lights_request_handler(). If we get a request to change the config then we release the light with gb_lights_light_release() and re-allocated it. However, if the allocation fails part way through then we call gb_lights_light_release() again. This can lead to a couple different double frees where we haven't cleared out the original values: gb_lights_light_v4l2_unregister(light); ... kfree(light->channels); kfree(light->name); I also made a small change to how we set "light->channels_count = 0;". The original code handled this part fine and did not cause a use after free but it was sort of complicated to read. Fixes: 2870b52b ("greybus: lights: add lights implementation") Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Link: https://lore.kernel.org/r/20190829122839.GA20116@mwandaSigned-off-by:
-
P SAI PRASANTH authored
This patch fixes the following checkpath warning in the file drivers/staging/rts5208/rtsx_transport.c:546 WARNING: line over 80 characters + option = RTSX_SG_VALID | RTSX_SG_END | RTSX_SG_TRANS_DATA; Signed-off-by:
P SAI PRASANTH <saip2823@gmail.com> Link: https://lore.kernel.org/r/20190831034926.GA17810@dell-inspironSigned-off-by:
-
Prakhar Sinha authored
This patch solves the following checkpatch.pl's message in drivers/staging/rts5208/rtsx_transport.c:397. WARNING: line over 80 characters + option = RTSX_SG_VALID | RTSX_SG_END | RTSX_SG_TRANS_DATA; Signed-off-by:
Prakhar Sinha <prakharsinha2808@gmail.com> Link: https://lore.kernel.org/r/20190830121656.GA2740@MeraComputerSigned-off-by:
-
Colin Ian King authored
There are two hunks of code that check if sd30_mode is true however an earlier check in an outer code block on sd30_mode being false means that sd30_mode can never be true at these points so these checks are redundant. Remove the dead code. Addresses-Coverity: ("Logically dead code") Signed-off-by: -
Colin Ian King authored
The return statement is incorrect, the error exit should be by assigning ret with the error code and exiting via label out. Thanks to Valdis Klētnieks for correcting my original fix. Addresses-Coverity: ("Structurally dead code") Signed-off-by: -
Colin Ian King authored
Currently there are error return paths in ffsReadFile that exit via lable err_out that return and uninitialized error return in variable ret. Fix this by initializing ret to zero. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: c48c9f7f ("staging: exfat: add exfat filesystem code to staging") Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20190830184644.15590-1-colin.king@canonical.comSigned-off-by:
-
Valentin Vidic authored
Fixes checkpatch.pl warning: CHECK: Prefer using the BIT macro Signed-off-by:
-
Valentin Vidic authored
Fixes checkpatch.pl warnings: CHECK: Please don't use multiple blank lines CHECK: Blank lines aren't necessary after an open brace '{' CHECK: Please use a blank line after function/struct/union/enum declarations Signed-off-by:
-
- 02 Sep, 2019 2 commits
-
-
Greg Kroah-Hartman authored
This should fix a build error in some configurations when CONFIG_BLOCK is not selected. Also properly set the dependancy for no FAT support at the same time. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Link: https://lore.kernel.org/r/20190902174631.GB31445@kroah.com Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by:
-
Valdis Klētnieks authored
Concerns have been raised about the exfat driver accidentally mounting fat/vfat file systems. Add an extra configure option to help prevent that. Signed-off-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Link: https://lore.kernel.org/r/245727.1567183359@turing-policeSigned-off-by:
-
- 30 Aug, 2019 4 commits
-
-
Gao Xiang authored
As Joe Perches suggested [1], err = bio_add_page(bio, page, PAGE_SIZE, 0); - if (unlikely(err != PAGE_SIZE)) { + if (err != PAGE_SIZE) { err = -EFAULT; goto err_out; } The initial assignment to err is odd as it's not actually an error value -E<FOO> but a int size from a unsigned int len. Here the return is either 0 or PAGE_SIZE. This would be more legible to me as: if (bio_add_page(bio, page, PAGE_SIZE, 0) != PAGE_SIZE) { err = -EFAULT; goto err_out; } [1] https://lore.kernel.org/r/74c4784319b40deabfbaea92468f7e3ef44f1c96.camel@perches.com/Signed-off-by: -
Gao Xiang authored
As Dan Carpenter suggested [1], I have to remove all erofs likely/unlikely annotations. [1] https://lore.kernel.org/linux-fsdevel/20190829154346.GK23584@kadam/Reported-by:
-
Greg Kroah-Hartman authored
I messed up on the exfat MAINTAINER entry, the code is in drivers/staging/exfat/ not fs/exfat/ Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Reported-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Valdis Klētnieks authored
The exfat code needs a lot of work to get it into "real" shape for the fs/ part of the kernel, so put it into drivers/staging/ for now so that it can be worked on by everyone in the community. The full specification of the filesystem can be found at: https://docs.microsoft.com/en-us/windows/win32/fileio/exfat-specificationSigned-off-by:
-
- 28 Aug, 2019 2 commits
-
-
YueHaibing authored
If most_register_configfs_subsys() fails, we should call most_deregister_component() do cleanup. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 919c03ae ("staging: most: enable configfs support") Signed-off-by:
-
Stephen Brennan authored
Checkpatch reports WARNING:SUSPECT_CODE_INDENT in several places. Fix this by aligning code properly with tabs. Signed-off-by:
Stephen Brennan <stephen@brennan.io> Link: https://lore.kernel.org/r/20190828043542.3753-1-stephen@brennan.ioSigned-off-by:
-
