- 12 Jan, 2021 40 commits
-
-
Sakari Ailus authored
Document pratices of handling clocks in camera sensor drivers on both DT and ACPI. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Andy Shevchenko authored
According to the original code in the driver it was never assumed to work with big page sizes: unsigned short type followed by PAGE_SHIFT and PAGE_MASK which may be different on non-x86 architectures. Recently LKP found an issue on non-x86 architectures due to above mentioned limitations. Since Sakari acknowledges that it's not really useful to be able to compile this elsewhere, mark it x86 only. Fixes: a31d19f8 ("media: ipu3: allow building it with COMPILE_TEST on non-x86 archs") Reported-by:
kernel test robot <lkp@intel.com> Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
kvmalloc() was used to allocate the temporary memory buffer that was used to contain both the IOCTL argument as well as a possible array argument that could have been large. Now that the two are separated, the IOCTL argument is known to be small in size. Use kmalloc to allocate it instead of kvmalloc. Similarly for releasing it. Suggested-by:
Arnd Bergmann <arnd@kernel.org> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
When an IOCTL with argument size larger than 128 that also used array arguments were handled, two memory allocations were made but alas, only the latter one of them was released. This happened because there was only a single local variable to hold such a temporary allocation. Fix this by adding separate variables to hold the pointers to the temporary allocations. Reported-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by:
-
Sakari Ailus authored
Add and document a media entity type for Image Signal Processor devices. Surprisingly we didn't have one, so add one now. More or less all ISP drivers should use this type instead of what they currently are using (or not using anything). Signed-off-by:
-
Sakari Ailus authored
Document that v4l2_async_notifier_parse_fwnode_endpoints() is deprecated. Its functionality has been replaced by other, better functions. Also add a reference to an example if someone ends up wandering here. Signed-off-by:
-
Sakari Ailus authored
Update the formula to calculate the pixel rate on the link for C-PHY. Signed-off-by:
-
Jacopo Mondi authored
Capturing in 640x480 SBGGR8_1X8 hangs the system when capturing with the unicam driver on RaspberryPi 4 platform. Remove it and remove the support for multiple media bus codes in the driver. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
Jacopo Mondi authored
The driver reports the V4L2_SUBDEV_FL_HAS_EVENTS flag but does not support subscribing and unsubscribing to events. Signed-off-by:
-
Jacopo Mondi authored
Make the two register-value lists const. Signed-off-by:
-
Jacopo Mondi authored
Use pm_runtime_get_if_in_use() in s_ctrl to apply controls only when the device is powered on. Rework the control set function to balance the pm_runtime_get_if_in_use() call with pm_runtime_put() at the end of the function. Signed-off-by:
-
Jacopo Mondi authored
Rework the s_stream() operation to turn the sensor on and off at stream enable/disable time using the pm_runtime infrastructure. Protect the stream on/off from being called multiple times in sequence with a 'streaming' flag. Signed-off-by:
-
Jacopo Mondi authored
Use the pm_runtime framework to replace the legacy s_power() operation. Signed-off-by:
-
Dave Stevenson authored
Exposure is clipped by the VTS of the mode, so it needs to be updated when this is changed. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
-
Dave Stevenson authored
Adds vblank control to allow for frame rate control. Signed-off-by:
-
Jacopo Mondi authored
Add support for the V4L2_CID_HBLANK read-only control. The implementation has been upported from RaspberryPi BSP commit: commit d82f202156605 ("media: i2c: ov5647: Set V4L2_SUBDEV_FL_HAS_EVENTS flag") Signed-off-by: -
Dave Stevenson authored
Clients need to know the pixel rate in order to compute exposure and frame rate values. Advertise it. Signed-off-by:
-
Dave Stevenson authored
The ov5647 subdev can generate control events, therefore set the V4L2_SUBDEV_FL_HAS_EVENTS flag. Signed-off-by:
-
Jacopo Mondi authored
Now that the driver supports more than a single mode, implement the .set_fmt pad operation and adjust the existing .get_fmt one to report the currently applied format. Signed-off-by:
-
Jacopo Mondi authored
The SBGGR10_1X10 formats support more resolutions than SBGGR8_1X8. Make it the default sensor format and set 2x2 binned 640x480 resolution as default sensor size as it maximizes the FOV and framerate. Signed-off-by:
-
Jacopo Mondi authored
Add 4 additional sensor modes in SBGGR10_1X10 format. Add the following resolutions: - 2592x1944 full resolution - 1920x1080 1080p cropped - 1296x972 2x2 binned - 640x480 2x2 binned, 2x2 subsampled The register lists and modes definition have been upported from the RaspberryPi BSP at revision: commit 581dfda6d0a62 ("media: i2c: ov5647: Advertise the correct exposure range") Signed-off-by: -
Jacopo Mondi authored
Before adding new modes, rename the only existing one to report the bit depth to distinguish it from future additions. While at it, briefly describe the mode. Signed-off-by:
-
Dave Stevenson authored
Support the get_selection() pad operation to report the device full pixel array size, the currently applied analogue crop rectangle and the active pixel array dimensions. Signed-off-by:
-
Jacopo Mondi authored
Break format handling out from the main driver structure. This commit prepares for the introduction of more sensor formats and resolutions by instrumenting the existing operation to work on multiple modes instead of assuming a single supported one. Signed-off-by:
-
Jacopo Mondi authored
The driver structure name is referred to with different names ('ov5647', 'state', 'sensor') in different functions in the driver. Polish this up by using 'struct ov5647 *sensor' everywhere. Signed-off-by: -
David Plowman authored
Add controls to support AWB, AEC and AGC. Also add control support to set exposure (in lines) and analogue gain (as a register code). Signed-off-by:
David Plowman <david.plowman@raspberrypi.com> Signed-off-by:
Naushir Patuck <naush@raspberrypi.com> Signed-off-by:
-
Jacopo Mondi authored
Use the driver mutex to protect s_stream() operations. This will become more relevant once the sensor will support more formats and set_format() could be issue concurrently to s_stream(). Signed-off-by:
-
Jacopo Mondi authored
Implement the .enum_frame_size subdev pad operation. As the driver only supports one format and one resolution at the moment the implementation is trivial. Signed-off-by:
-
Jacopo Mondi authored
Rename __sensor_init() function to ov5647_set_mode() as the function is a regular one and the double underscores prefix shall be removed, and then move it to program the mode at s_stream(1) time, not at sensor power up. Break out from __sensor_init() the stream_off() operation call at sensor power up to coax the lanes in LP-11 state. Signed-off-by:
-
Jacopo Mondi authored
The ov5647_read()/ov5647_write() return in case of success the number of bytes read or written respectively. This requires callers to check if the return value is less than zero to detect an error. Unfortunately, in several places, callers directly return the result of a read/write call, causing issues when the returned valued is checked to be different from zero to detect an error. Fix this by returning zero if i2c_master_send() and i2c_master_read() return a positive value (the number of bytes written or read). Signed-off-by:
-
Jacopo Mondi authored
Replace the boilerplate license text with the SPDX identifier. Signed-off-by:
-
Jacopo Mondi authored
The driver has some obvious style issues which are worth fixing before expanding the driver capabilities. Fix: - Variable declaration order - Function parameters alignment - Multi-line comments and spurious line breaks - Use lowercase for hexadecimal values - > 80 cols lines Cosmetic change, no functional changes intended. Signed-off-by:
-
Jacopo Mondi authored
The driver currently support a single format. Fix its initialization to use the only supported resolution. Signed-off-by:
-
Dave Stevenson authored
There's no way to query the subdevice for the supported resolutions. Add set_fmt and get_fmt implementations. Since there's only one format supported set_fmt does nothing and get returns single format. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
Roman Kovalivskyi <roman.kovalivskyi@globallogic.com> Signed-off-by:
-
Dave Stevenson authored
Add support for optional non-continuous clock mode to the ov5647 sensor driver. Non-continuous clock saves a small amount of power and on some SoCs is easier to interface with. Signed-off-by:
-
Dave Stevenson authored
Add support for an optional GPIO connected to PWDN on the sensor. This allows the use of hardware standby mode where internal device clock and circuit activities are halted. Please note that power is off when PWDN is high. Signed-off-by:
-
Jacopo Mondi authored
Rename 'ov5647.yaml' as 'ovti,ov5647.yaml' and update the MAINTAINERS file entry accordingly. Signed-off-by:
-
Hans Verkuil authored
These two functions did not take the imx219->mutex lock, but imx219_get_format_code checks that a lock is taken, so it issues a warning: [ 8.738717] WARNING: CPU: 2 PID: 60 at drivers/media/i2c/imx219.c:653 imx219_get_format_code+0xac/0xc0 [ 8.748113] Modules linked in: [ 8.751214] CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G W 5.8.0-rc1-arm64 #148 [ 8.759821] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) [ 8.765806] Workqueue: events deferred_probe_work_func [ 8.771003] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 8.776635] pc : imx219_get_format_code+0xac/0xc0 [ 8.781390] lr : imx219_get_format_code+0xa8/0xc0 [ 8.786143] sp : ffff800012a538f0 [ 8.789495] x29: ffff800012a538f0 x28: ffff800012838e90 [ 8.794867] x27: ffff0000f28c5800 x26: ffff800011161c68 [ 8.800237] x25: ffff0000f2a5a3f8 x24: 0000000000000018 [ 8.805605] x23: ffff0000f284ef18 x22: ffff0000f2a5a080 [ 8.810974] x21: ffff0000f284ff00 x20: ffff0000f2a5a080 [ 8.816343] x19: 000000000000300f x18: 00000000ffffffff [ 8.821712] x17: ffff800011c77268 x16: 00000000000040d7 [ 8.827081] x15: 00000000000040d8 x14: 0000000000000000 [ 8.832451] x13: 00000000000040d4 x12: ffff800011d19300 [ 8.837819] x11: 00000000000208c0 x10: 0000000000000004 [ 8.843188] x9 : 000000003baa2ecd x8 : 000000008b3f9c73 [ 8.848558] x7 : 0000000000000008 x6 : 0000000000000034 [ 8.853929] x5 : 0000000000000000 x4 : 0000000000000001 [ 8.859297] x3 : ffff800010a2a8a8 x2 : ffff0000f84a8000 [ 8.864666] x1 : 0000000000000000 x0 : 0000000000000000 [ 8.870034] Call trace: [ 8.872515] imx219_get_format_code+0xac/0xc0 [ 8.876921] imx219_enum_mbus_code+0x38/0x60 [ 8.881241] call_enum_mbus_code+0x50/0x70 [ 8.885387] tegra_vi_graph_notify_complete+0x290/0x5e8 [ 8.890670] v4l2_async_notifier_try_complete.part.0+0x48/0x68 [ 8.896563] v4l2_async_register_subdev+0x100/0x1c0 [ 8.901497] v4l2_async_register_subdev_sensor_common+0x70/0xf0 [ 8.907477] imx219_probe+0x590/0x728 [ 8.911184] i2c_device_probe+0xe4/0x2b0 [ 8.915151] really_probe+0xd8/0x330 [ 8.918768] driver_probe_device+0x58/0xb8 [ 8.922909] __device_attach_driver+0x84/0xc8 [ 8.927315] bus_for_each_drv+0x78/0xc8 [ 8.931193] __device_attach+0xe4/0x140 [ 8.935072] device_initial_probe+0x14/0x20 [ 8.939301] bus_probe_device+0x9c/0xa8 [ 8.943179] deferred_probe_work_func+0x74/0xb0 [ 8.947759] process_one_work+0x2c4/0x740 [ 8.951813] worker_thread+0x4c/0x430 [ 8.955518] kthread+0x158/0x178 [ 8.958786] ret_from_fork+0x10/0x1c [ 8.962401] irq event stamp: 63536 [ 8.965846] hardirqs last enabled at (63535): [<ffff800010082398>] el1_irq+0xd8/0x180 [ 8.973846] hardirqs last disabled at (63536): [<ffff8000100a6484>] do_debug_exception+0x16c/0x258 [ 8.982895] softirqs last enabled at (63534): [<ffff800010080d4c>] _stext+0x54c/0x594 [ 8.990896] softirqs last disabled at (63525): [<ffff8000100c8350>] irq_exit+0x100/0x138 [ 8.999066] ---[ end trace ebfbcd84b75ef921 ]--- [ 9.004354] ------------[ cut here ]------------ Signed-off-by:
-
Sakari Ailus authored
The link_validate pad op will only be called on sink pads. Document this. Signed-off-by:
-
Sakari Ailus authored
We no longer have format related callbacks in video ops. Remove the reference to them. Signed-off-by:
-
