- 08 Nov, 2021 2 commits
-
-
Florian Westphal authored
VRF device calls the output/postrouting hooks so packet should be seeon with oifname tvrf and once with eth0. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Rework the reproducer for the vrf+conntrack regression reported by Eugene into a selftest and also add a test for ip masquerading that Lahav fixed recently. With net or net-next tree, the first test fails and the latter two pass. With 09e856d5 ("vrf: Reset skb conntrack connection on VRF rcv") reverted first test passes but the last two fail. A proper fix needs more work, for time being a revert seems to be the best choice, snat/masquerade did not work before the fix. Link: https://lore.kernel.org/netdev/378ca299-4474-7e9a-3d36-2350c8c98995@gmail.com/T/#m95358a31810df7392f541f99d187227bc75c9963Reported-by:
Eugene Crosser <crosser@average.org> Cc: Lahav Schlesinger <lschlesinger@drivenets.com> Signed-off-by:
-
- 07 Nov, 2021 9 commits
-
-
Christophe JAILLET authored
'netdev' is a managed resource allocated in the probe using 'devm_alloc_etherdev()'. It must not be freed explicitly in the remove function. Fixes: ee7da21a ("net: Add driver for LiteX's LiteETH network interface") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chengfeng Ye authored
skb is already freed by dev_kfree_skb in pn533_fill_fragment_skbs, but follow error handler branch when pn533_fill_fragment_skbs() fails, skb is freed again, results in double free issue. Fix this by not free skb in error path of pn533_fill_fragment_skbs. Fixes: 963a82e0 ("NFC: pn533: Split large Tx frames in chunks") Fixes: 93ad4202 ("NFC: pn533: Target mode Tx fragmentation support") Signed-off-by:
Chengfeng Ye <cyeaa@connect.ust.hk> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
Anders Roxell authored
When building selftests/net with clang, the compiler warn about the function abs() see below: tls.c:657:15: warning: variable 'len_compared' set but not used [-Wunused-but-set-variable] unsigned int len_compared = 0; ^ Rework to remove the unused variable and the for-loop where the variable 'len_compared' was assinged. Fixes: 7f657d5b ("selftests: tls: add selftests for TLS sockets") Signed-off-by:Anders Roxell <anders.roxell@linaro.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Volodymyr Mytnyk authored
The prestera FW v4.0 support commit has been merged accidentally w/o review comments addressed and waiting for the final patch set to be uploaded. So, fix the remaining comments related to structure laid out and build issues. Reported-by:
kernel test robot <lkp@intel.com> Fixes: bb5dbf2c ("net: marvell: prestera: add firmware v4.0 support") Signed-off-by:
Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by:
-
Alexey Khoroshilov authored
sctp_sf_violation_chunk() is not called with asoc argument equal to NULL, but if that happens it would lead to NULL pointer dereference in sctp_vtag_verify(). The patch removes code that handles NULL asoc in sctp_sf_violation_chunk(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Proposed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Both ifindex and LLC_SK_DEV_HASH_ENTRIES are signed. This means that (ifindex % LLC_SK_DEV_HASH_ENTRIES) is negative if @ifindex is negative. We could simply make LLC_SK_DEV_HASH_ENTRIES unsigned. In this patch I chose to use hash_32() to get more entropy from @ifindex, like llc_sk_laddr_hashfn(). UBSAN: array-index-out-of-bounds in ./include/net/llc.h:75:26 index -43 is out of range for type 'hlist_head [64]' CPU: 1 PID: 20999 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 llc_sk_dev_hash include/net/llc.h:75 [inline] llc_sap_add_socket+0x49c/0x520 net/llc/llc_conn.c:697 llc_ui_bind+0x680/0xd70 net/llc/af_llc.c:404 __sys_bind+0x1e9/0x250 net/socket.c:1693 __do_sys_bind net/socket.c:1704 [inline] __se_sys_bind net/socket.c:1702 [inline] __x64_sys_bind+0x6f/0xb0 net/socket.c:1702 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fa503407ae9 Fixes: 6d2e3ea2 ("llc: use a device based hash table to speed up multicast delivery") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warnings and spacing in hns3_ethtool.c: hns3_ethtool.c:246: warning: No description found for return value of 'hns3_lp_run_test' hns3_ethtool.c:408: warning: expecting prototype for hns3_nic_self_test(). Prototype was for hns3_self_test() instead Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
-
Krzysztof Kozlowski authored
It is not an error to receive an URB with -ENOENT because it can come from regular user operations, e.g. pressing CTRL+C when running nfctool from neard. Make it a debugging message, not an error. Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.16-20211106' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can linux-can-fixes-for-5.16-20211106 Marc Kleine-Budde says: ==================== pull-request: can 2021-11-06 this is a pull request of 8 patches for net/master. The first 3 patches are by Zhang Changzhong and fix 3 standard conformance problems in the j1939 CAN stack. The next patch is by Vincent Mailhol and fixes a memory leak in the leak error path of the etas_es58x CAN driver. Stephane Grosjean contributes 2 patches for the peak_usb driver to fix the bus error handling and update the order of printed information regarding firmware version and available updates. The last 2 patches are by me and fixes a packet starvation problem in the bus off case and the error handling in the mcp251xfd_chip_start() function. ==================== Signed-off-by:
-
- 06 Nov, 2021 9 commits
-
-
Marc Kleine-Budde authored
This patch fixes the error handling for mcp251xfd_chip_rx_int_enable(). Instead just returning the error, properly shut down the chip. Link: https://lore.kernel.org/all/20211106201526.44292-2-mkl@pengutronix.de Fixes: 55e5b97f ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
can: mcp251xfd: mcp251xfd_irq(): add missing can_rx_offload_threaded_irq_finish() in case of bus off The function can_rx_offload_threaded_irq_finish() is needed to trigger the NAPI thread to deliver read CAN frames to the networking stack. This patch adds the missing call to can_rx_offload_threaded_irq_finish() in case of a bus off, before leaving the interrupt handler to avoid packet starvation. Link: https://lore.kernel.org/all/20211106201526.44292-1-mkl@pengutronix.de Fixes: 30bfec4f ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt") Cc: stable@vger.kernel.org Signed-off-by:
-
Stephane Grosjean authored
Proposes the possible update of the PCAN-USB firmware after indicating its name and current version. Link: https://lore.kernel.org/all/20211021081505.18223-3-s.grosjean@peak-system.comSigned-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
-
Stephane Grosjean authored
Since for the PCAN-USB, the management of the transition to the ERROR_WARNING or ERROR_PASSIVE state is done according to the error counters, these must be requested unconditionally. Link: https://lore.kernel.org/all/20211021081505.18223-2-s.grosjean@peak-system.com Fixes: c11dcee7 ("can: peak_usb: pcan_usb_decode_error(): upgrade handling of bus state changes") Cc: stable@vger.kernel.org Signed-off-by:
-
Vincent Mailhol authored
In es58x_rx_err_msg(), if can->do_set_mode() fails, the function directly returns without calling netif_rx(skb). This means that the skb previously allocated by alloc_can_err_skb() is not freed. In other terms, this is a memory leak. This patch simply removes the return statement in the error branch and let the function continue. Issue was found with GCC -fanalyzer, please follow the link below for details. Fixes: 85372578 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Link: https://lore.kernel.org/all/20211026180740.1953265-1-mailhol.vincent@wanadoo.frSigned-off-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by:
-
Zhang Changzhong authored
The TP.CM_BAM message must be sent to the global address [1], so add a check to drop TP.CM_BAM sent to a non-global address. Without this patch, the receiver will treat the following packets as normal RTS/CTS transport: 18EC0102#20090002FF002301 18EB0102#0100000000000000 18EB0102#020000FFFFFFFFFF [1] SAE-J1939-82 2015 A.3.3 Row 1. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1635431907-15617-4-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Zhang Changzhong authored
According to SAE-J1939-82 2015 (A.3.6 Row 2), a receiver should never send TP.CM_CTS to the global address, so we can add a check in j1939_can_recv() to drop messages with invalid source address. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1635431907-15617-3-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by:
-
Zhang Changzhong authored
This patch prevents BAM transport from being closed by receiving abort message, as specified in SAE-J1939-82 2015 (A.3.3 Row 4). Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1635431907-15617-2-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by:
-
Nghia Le authored
The newinet value is initialized with inet_sk() in a block code to handle sockets for the ETH_P_IP protocol. Along this code path, newinet is never read. Thus, assignment to newinet is needless and can be removed. Signed-off-by:
Nghia Le <nghialm78@gmail.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
- 05 Nov, 2021 20 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-11-05 We've added 15 non-merge commits during the last 3 day(s) which contain a total of 14 files changed, 199 insertions(+), 90 deletions(-). The main changes are: 1) Fix regression from stack spill/fill of <8 byte scalars, from Martin KaFai Lau. 2) Fix perf's build of bpftool's bootstrap version due to missing libbpf headers, from Quentin Monnet. 3) Fix riscv{32,64} BPF exception tables build errors and warnings, from Björn Töpel. 4) Fix bpf fs to allow RENAME_EXCHANGE support for atomic upgrades on sk_lookup control planes, from Lorenz Bauer. 5) Fix libbpf's error reporting in bpf_map_lookup_and_delete_elem_flags() due to missing libbpf_err_errno(), from Mehrdad Arshad Rad. 6) Various fixes to make xdp_redirect_multi selftest more reliable, from Hangbin Liu. 7) Fix netcnt selftest to make it run serial and thus avoid conflicts with other cgroup/skb selftests run in parallel that could cause flakes, from Andrii Nakryiko. 8) Fix reuseport_bpf_numa networking selftest to skip unavailable NUMA nodes, from Kleber Sacilotto de Souza. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: riscv, bpf: Fix RV32 broken build, and silence RV64 warning selftests/bpf/xdp_redirect_multi: Limit the tests in netns selftests/bpf/xdp_redirect_multi: Give tcpdump a chance to terminate cleanly selftests/bpf/xdp_redirect_multi: Use arping to accurate the arp number selftests/bpf/xdp_redirect_multi: Put the logs to tmp folder libbpf: Fix lookup_and_delete_elem_flags error reporting bpftool: Install libbpf headers for the bootstrap version, too selftests/net: Fix reuseport_bpf_numa by skipping unavailable nodes selftests/bpf: Verifier test on refill from a smaller spill bpf: Do not reject when the stack read size is different from the tracked scalar size selftests/bpf: Make netcnt selftests serial to avoid spurious failures selftests/bpf: Test RENAME_EXCHANGE and RENAME_NOREPLACE on bpffs selftests/bpf: Convert test_bpffs to ASSERT macros libfs: Support RENAME_EXCHANGE in simple_rename() libfs: Move shmem_exchange to simple_rename_exchange ==================== Link: https://lore.kernel.org/r/20211105165803.29372-1-daniel@iogearbox.netSigned-off-by: -
Björn Töpel authored
Commit 252c765b ("riscv, bpf: Add BPF exception tables") only addressed RV64, and broke the RV32 build [1]. Fix by gating the exception tables code with CONFIG_ARCH_RV64I. Further, silence a "-Wmissing-prototypes" warning [2] in the RV64 BPF JIT. [1] https://lore.kernel.org/llvm/202111020610.9oy9Rr0G-lkp@intel.com/ [2] https://lore.kernel.org/llvm/202110290334.2zdMyRq4-lkp@intel.com/ Fixes: 252c765b ("riscv, bpf: Add BPF exception tables") Signed-off-by:
Björn Töpel <bjorn@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Tong Tiangen <tongtiangen@huawei.com> Link: https://lore.kernel.org/bpf/20211103115453.397209-1-bjorn@kernel.org
-
Hangbin Liu authored
As I want to test both DEVMAP and DEVMAP_HASH in XDP multicast redirect, I limited DEVMAP max entries to a small value for performace. When the test runs after amount of interface creating/deleting tests. The interface index will exceed the map max entries and xdp_redirect_multi will error out with "Get interfacesInterface index to large". Fix this issue by limit the tests in netns and specify the ifindex when creating interfaces. Fixes: d2329247 ("selftests/bpf: Add xdp_redirect_multi test") Reported-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
No need to kill tcpdump with -9. Fixes: d2329247 ("selftests/bpf: Add xdp_redirect_multi test") Suggested-by:
-
Hangbin Liu authored
The arp request number triggered by ping none exist address is not accurate, which may lead the test false negative/positive. Change to use arping to accurate the arp number. Also do not use grep pattern match for dot. Fixes: d2329247 ("selftests/bpf: Add xdp_redirect_multi test") Suggested-by:
-
Hangbin Liu authored
The xdp_redirect_multi test logs are created in selftest folder and not cleaned after test. Let's creat a tmp dir and remove the logs after testing. Fixes: d2329247 ("selftests/bpf: Add xdp_redirect_multi test") Suggested-by:
-
Mehrdad Arshad Rad authored
Fix bpf_map_lookup_and_delete_elem_flags() to pass the return code through libbpf_err_errno() as we do similarly in bpf_map_lookup_and_delete_elem(). Fixes: f12b6543 ("libbpf: Streamline error reporting for low-level APIs") Signed-off-by:
Mehrdad Arshad Rad <arshad.rad@gmail.com> Signed-off-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20211104171354.11072-1-arshad.rad@gmail.com
-
Quentin Monnet authored
We recently changed bpftool's Makefile to make it install libbpf's headers locally instead of pulling them from the source directory of the library. Although bpftool needs two versions of libbpf, a "regular" one and a "bootstrap" version, we would only install headers for the regular libbpf build. Given that this build always occurs before the bootstrap build when building bpftool, this is enough to ensure that the bootstrap bpftool will have access to the headers exported through the regular libbpf build. However, this did not account for the case when we only want the bootstrap version of bpftool, through the "bootstrap" target. For example, perf needs the bootstrap version only, to generate BPF skeletons. In that case, when are the headers installed? For some time, the issue has been masked, because we had a step (the installation of headers internal to libbpf) which would depend on the regular build of libbpf and hence trigger the export of the headers, just for the sake of creating a directory. But this changed with commit 8b6c4624 ("bpftool: Remove Makefile dep. on $(LIBBPF) for $(LIBBPF_INTERNAL_HDRS)"), where we cleaned up that stage and removed the dependency on the regular libbpf build. As a result, when we only want the bootstrap bpftool version, the regular libbpf is no longer built. The bootstrap libbpf version is built, but headers are not exported, and the bootstrap bpftool build fails because of the missing headers. To fix this, we also install the library headers for the bootstrap version of libbpf, to use them for the bootstrap bpftool and for generating the skeletons. Fixes: f012ade1 ("bpftool: Install libbpf headers instead of including the dir") Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Signed-off-by:
-
Volodymyr Mytnyk authored
fix the remaining build issues reported by patchwork in firmware v4.0 support commit which has been already merged. Fix patchwork issues: - source inline - checkpatch Fixes: bb5dbf2c ("net: marvell: prestera: add firmware v4.0 support") Signed-off-by:
-
Zhang Mingyu authored
'net/protocol.h' included in 'drivers/net/amt.c' is duplicated. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Zhang Mingyu <zhang.mingyu@zte.com.cn> Signed-off-by:
-
Arnd Bergmann authored
The mii ioctls are now handled by the ndo_eth_ioctl() callback, not the old ndo_do_ioctl(), but octeontx2-nicvf introduced the function for the old way. Move it over to ndo_eth_ioctl() to actually allow calling it from user space. Fixes: 43510ef4 ("octeontx2-nicvf: Add PTP hardware clock support to NIX VF") Fixes: a7605370 ("dev_ioctl: split out ndo_eth_ioctl") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
The timestamp ioctls are now handled by the ndo_eth_ioctl() callback, not the old ndo_do_ioctl(), but oax88796 introduced the function for the old way. Move it over to ndo_eth_ioctl() to actually allow calling it from user space. Fixes: a97c69ba ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver") Fixes: a7605370 ("dev_ioctl: split out ndo_eth_ioctl") Signed-off-by:
Lukasz Stelmach <l.stelmach@samsung.com> Signed-off-by:
-
Yang Li authored
Eliminate the following coccicheck warning: ./drivers/net/amt.c:2795:6-9: ERROR: amt is NULL but dereferenced. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Jakub Kicinski authored
Build bot says: >> drivers/net/ethernet/asix/ax88796c_main.c:1116:34: warning: unused variable 'ax88796c_dt_ids' [-Wunused-const-variable] static const struct of_device_id ax88796c_dt_ids[] = { ^ The only reference to this array is wrapped in of_match_ptr(). Reported-by: -
Menglong Dong authored
udp_mem is a vector of 3 INTEGERs, which is used to limit the number of pages allowed for queueing by all UDP sockets. However, sk_has_memory_pressure() in __sk_mem_raise_allocated() always return false for udp, as memory pressure is not supported by udp, which means that __sk_mem_raise_allocated() will fail once pages allocated for udp socket exceeds udp_mem[0]. Therefor, udp_mem[0] is the only one that limit the number of pages. However, the document of udp_mem just express that udp_mem[2] is the limitation. So, just fix it. Signed-off-by:
Menglong Dong <imagedong@tencent.com> Signed-off-by:
-
Xu Wang authored
The print function dev_err() is redundant because platform_get_irq() already prints an error. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Reviewed-by:
Cai Huoqing <caihuoqing@baidu.com> Signed-off-by:
-
Arnd Bergmann authored
The octeontx2 pf nic driver failsz to link when the devlink support is not reachable: aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_get': otx2_devlink.c:(.text+0x10): undefined reference to `devlink_priv' aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_validate': otx2_devlink.c:(.text+0x50): undefined reference to `devlink_priv' aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_set': otx2_devlink.c:(.text+0xd0): undefined reference to `devlink_priv' aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_devlink_info_get': otx2_devlink.c:(.text+0x150): undefined reference to `devlink_priv' This is already selected by the admin function driver, but not the actual nic, which might be built-in when the af driver is not. Fixes: 2da48943 ("octeontx2-pf: devlink params support to set mcam entry count") Signed-off-by:
-
Yang Guang authored
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by:
Yang Guang <yang.guang5@zte.com.cn> Signed-off-by:
-
Yang Guang authored
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by:
-
luo penghao authored
The assignment of err will be overwritten next, so this statement should be deleted. The clang_analyzer complains as follows: drivers/net/ethernet/broadcom/tg3.c:5506:2: warning: Value stored to 'expected_sg_dig_ctrl' is never read Reported-by:
luo penghao <luo.penghao@zte.com.cn> Signed-off-by:
-
