Pull RISC-V fixes from Palmer Dabbelt:

 - A pair of device tree fixes for the Polarfire SOC

 - A fix to avoid overflowing the PMU counter array when firmware
   incorrectly reports the number of supported counters, which manifests
   on OpenSBI versions prior to 1.1

* tag 'riscv-for-linus-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  perf: RISC-V: fix access beyond allocated array
  riscv: dts: microchip: use an mpfs specific l2 compatible
  dt-bindings: riscv: sifive-l2: add a PolarFire SoC compatible

Pull powerpc fix from Michael Ellerman:

 - Fix crashes on bare metal due to the new plkps driver trying to probe
   and call the hypervisor on non-pseries machines.

Thanks to Nathan Chancellor and Dan Horák.

* tag 'powerpc-6.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries: Fix plpks crash on non-pseries

Pull btrfs fixes from David Sterba:
 "A few more fixes to zoned mode and one regression fix for chunk limit:

    - Zoned mode fixes:
        - fix how wait/wake up is done when finishing zone
        - fix zone append limit in emulated mode
        - fix mount on devices with conventional zones

   - fix regression, user settable data chunk limit got accidentally
     lowered and causes allocation problems on some profiles (raid0,
     raid1)"

* tag 'for-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix the max chunk size and stripe length calculation
  btrfs: zoned: fix mounting with conventional zones
  btrfs: zoned: set pseudo max append zone limit in zone emulation mode
  btrfs: zoned: fix API misuse of zone finish waiting

Pull VFIO fix from Alex Williamson:

 - Fix zero page refcount leak (Alex Williamson)

* tag 'vfio-v6.0-rc5' of https://github.com/awilliam/linux-vfio:
  vfio/type1: Unpin zero pages

Pull sound fixes from Takashi Iwai:
 "Lots of small fixes for various drivers at this time, hopefully it
  will be the last big bump before 6.0 release.

  The significant changes are regression fixes for (yet again) HD-audio
  memory allocations and USB-audio PCM parameter handling, while there
  are many small ASoC device-specific fixes as well as a few
  out-of-bounds and race issues spotted by fuzzers"

* tag 'sound-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
  ALSA: usb-audio: Clear fixed clock rate at closing EP
  ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc()
  ALSA: hda: Once again fix regression of page allocations with IOMMU
  ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()
  ALSA: hda/tegra: Align BDL entry to 4KB boundary
  ALSA: hda/sigmatel: Fix unused variable warning for beep power change
  ALSA: pcm: oss: Fix race at SNDCTL_DSP_SYNC
  ALSA: hda/sigmatel: Keep power up while beep is enabled
  ALSA: aloop: Fix random zeros in capture data when using jiffies timer
  ALSA: usb-audio: Split endpoint setups for hw_params and prepare
  ALSA: usb-audio: Register card again for iface over delayed_register option
  ALSA: usb-audio: Inform the delayed registration more properly
  ASoC: fsl_aud2htx: Add error handler for pm_runtime_enable
  ASoC: fsl_aud2htx: register platform component before registering cpu dai
  ASoC: SOF: ipc4-topology: fix alh_group_ida max value
  ASoC: mchp-spdiftx: Fix clang -Wbitfield-constant-conversion
  ASoC: SOF: Kconfig: Make IPC_MESSAGE_INJECTOR depend on SND_SOC_SOF
  ASoC: SOF: Kconfig: Make IPC_FLOOD_TEST depend on SND_SOC_SOF
  ASoC: fsl_mqs: Fix supported clock DAI format
  ASoC: nau8540: Implement hw constraint for rates
  ...

Merge tag 'perf-tools-fixes-for-v6.0-2022-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix per-thread mmaps for multi-threaded targets, noticed with
   'perf top --pid' with multithreaded targets

 - Fix synthesis failure warnings in 'perf record'

 - Fix L2 Topdown metrics disappearance for raw events in 'perf stat'

 - Fix out of bound access in some CPU masks

 - Fix segfault if there is no CPU PMU table and a metric is sought,
   noticed when building with NO_JEVENTS=1

 - Skip dummy event attr check in 'perf script' fixing nonsensical
   warning about UREGS attribute not set, as 'dummy' events have no
   samples

 - Fix 'iregs' field handling with dummy events on hybrid systems in
   'perf script'

 - Prevent potential memory leak in c2c_he_zalloc() in 'perf c2c'

 - Don't install data files with x permissions

 - Fix types for print format in dlfilter-show-cycles

 - Switch deprecated openssl MD5_* functions to new EVP API in 'genelf'

 - Remove redundant word 'contention' in 'perf lock' help message

* tag 'perf-tools-fixes-for-v6.0-2022-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf record: Fix synthesis failure warnings
  perf tools: Don't install data files with x permissions
  perf script: Fix Cannot print 'iregs' field for hybrid systems
  perf lock: Remove redundant word 'contention' in help message
  perf dlfilter dlfilter-show-cycles: Fix types for print format
  libperf evlist: Fix per-thread mmaps for multi-threaded targets
  perf c2c: Prevent potential memory leak in c2c_he_zalloc()
  perf genelf: Switch deprecated openssl MD5_* functions to new EVP API
  tools/perf: Fix out of bound access to cpu mask array
  perf affinity: Fix out of bound access to "sched_cpus" mask
  perf stat: Fix L2 Topdown metrics disappear for raw events
  perf script: Skip dummy event attr check
  perf metric: Return early if no CPU PMU table exists

Pull tracing fixes from Steven Rostedt:

 - Do not stop trace events in modules if TAINT_TEST is set

 - Do not clobber mount options when tracefs is mounted a second time

 - Prevent crash of kprobes in gate area

 - Add static annotation to some non global functions

 - Add some entries into the MAINTAINERS file

 - Fix check of event_mutex held when accessing trigger list

 - Add some __init/__exit annotations

 - Fix reporting of what called hardirq_{enable,disable}_ip function

* tag 'trace-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracefs: Only clobber mode/uid/gid on remount if asked
  kprobes: Prohibit probes in gate area
  rv/reactor: add __init/__exit annotations to module init/exit funcs
  tracing: Fix to check event_mutex is held while accessing trigger list
  tracing: hold caller_addr to hardirq_{enable,disable}_ip
  tracepoint: Allow trace events in modules with TAINT_TEST
  MAINTAINERS: add scripts/tracing/ to TRACING
  MAINTAINERS: Add Runtime Verification (RV) entry
  rv/monitors: Make monitor's automata definition static

Merge tag 'asm-generic-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull SOFTIRQ_ON_OWN_STACK rework from Arnd Bergmann:
 "Just one fixup patch, reworking the softirq_on_own_stack logic for
  preempt-rt kernels as discussed in

    https://lore.kernel.org/all/CAHk-=wgZSD3W2y6yczad2Am=EfHYyiPzTn3CfXxrriJf9i5W5w@mail.gmail.com/"

* tag 'asm-generic-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: Conditionally enable do_softirq_own_stack() via Kconfig.

Users may have explicitly configured their tracefs permissions; we
shouldn't overwrite those just because a second mount appeared.

Only clobber if the options were provided at mount time.

Note: the previous behavior was especially surprising in the presence of
automounted /sys/kernel/debug/tracing/.

Existing behavior:

  ## Pre-existing status: tracefs is 0755.
  # stat -c '%A' /sys/kernel/tracing/
  drwxr-xr-x

  ## (Re)trigger the automount.
  # umount /sys/kernel/debug/tracing
  # stat -c '%A' /sys/kernel/debug/tracing/.
  drwx------

  ## Unexpected: the automount changed mode for other mount instances.
  # stat -c '%A' /sys/kernel/tracing/
  drwx------

New behavior (after this change):

  ## Pre-existing status: tracefs is 0755.
  # stat -c '%A' /sys/kernel/tracing/
  drwxr-xr-x

  ## (Re)trigger the automount.
  # umount /sys/kernel/debug/tracing
  # stat -c '%A' /sys/kernel/debug/tracing/.
  drwxr-xr-x

  ## Expected: the automount does not change other mount instances.
  # stat -c '%A' /sys/kernel/tracing/
  drwxr-xr-x

Link: https://lkml.kernel.org/r/20220826174353.2.Iab6e5ea57963d6deca5311b27fb7226790d44406@changeid

Cc: stable@vger.kernel.org
Fixes: 4282d606 ("tracefs: Add new tracefs file system")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The system call gate area counts as kernel text but trying
to install a kprobe in this area fails with an Oops later on.
To fix this explicitly disallow the gate area for kprobes.

Found by syzkaller with the following reproducer:
perf_event_open$cgroup(&(0x7f00000001c0)={0x6, 0x80, 0x0, 0x0, 0x0, 0x0, 0x80ffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext={0x0, 0xffffffffff600000}}, 0xffffffffffffffff, 0x0, 0xffffffffffffffff, 0x0)

Sample report:
BUG: unable to handle page fault for address: fffffbfff3ac6000
PGD 6dfcb067 P4D 6dfcb067 PUD 6df8f067 PMD 6de4d067 PTE 0
Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 21978 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3-dirty #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline]
RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline]
RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134
Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89
RSP: 0018:ffffc900088bf860 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000
RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8
RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000
FS:  00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
 <TASK>
 insn_get_prefixes arch/x86/lib/insn.c:131 [inline]
 insn_get_opcode arch/x86/lib/insn.c:272 [inline]
 insn_get_modrm+0x64a/0x7b0 arch/x86/lib/insn.c:343
 insn_get_sib+0x29a/0x330 arch/x86/lib/insn.c:421
 insn_get_displacement+0x350/0x6b0 arch/x86/lib/insn.c:464
 insn_get_immediate arch/x86/lib/insn.c:632 [inline]
 insn_get_length arch/x86/lib/insn.c:707 [inline]
 insn_decode+0x43a/0x490 arch/x86/lib/insn.c:747
 can_probe+0xfc/0x1d0 arch/x86/kernel/kprobes/core.c:282
 arch_prepare_kprobe+0x79/0x1c0 arch/x86/kernel/kprobes/core.c:739
 prepare_kprobe kernel/kprobes.c:1160 [inline]
 register_kprobe kernel/kprobes.c:1641 [inline]
 register_kprobe+0xb6e/0x1690 kernel/kprobes.c:1603
 __register_trace_kprobe kernel/trace/trace_kprobe.c:509 [inline]
 __register_trace_kprobe+0x26a/0x2d0 kernel/trace/trace_kprobe.c:477
 create_local_trace_kprobe+0x1f7/0x350 kernel/trace/trace_kprobe.c:1833
 perf_kprobe_init+0x18c/0x280 kernel/trace/trace_event_perf.c:271
 perf_kprobe_event_init+0xf8/0x1c0 kernel/events/core.c:9888
 perf_try_init_event+0x12d/0x570 kernel/events/core.c:11261
 perf_init_event kernel/events/core.c:11325 [inline]
 perf_event_alloc.part.0+0xf7f/0x36a0 kernel/events/core.c:11619
 perf_event_alloc kernel/events/core.c:12059 [inline]
 __do_sys_perf_event_open+0x4a8/0x2a00 kernel/events/core.c:12157
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f63ef7efaed
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f63eef63028 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
RAX: ffffffffffffffda RBX: 00007f63ef90ff80 RCX: 00007f63ef7efaed
RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 00000000200001c0
RBP: 00007f63ef86019c R08: 0000000000000000 R09: 0000000000000000
R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000002 R14: 00007f63ef90ff80 R15: 00007f63eef43000
 </TASK>
Modules linked in:
CR2: fffffbfff3ac6000
---[ end trace 0000000000000000 ]---
RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline]
RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline]
RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134
Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89
RSP: 0018:ffffc900088bf860 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000
RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8
RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000
FS:  00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0
PKRU: 55555554
==================================================================

Link: https://lkml.kernel.org/r/20220907200917.654103-1-lk@c--e.de

cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@vger.kernel.org
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

SBI firmware should report total number of firmware and hardware counters
including unused ones or special ones. In this case the kernel doesn't need
to make any assumptions about gaps in reported counters, e.g. excluded timer
counter. That was fixed in OpenSBI v1.1 by commit 3f66465fb6bf ("lib: pmu:
allow to use the highest available counter"). This kernel patch has no effect
if SBI firmware behaves correctly. However it eliminates access beyond the
allocated pmu_ctr_list if the kernel is used with OpenSBI older than v1.1.

Fixes: e9991434 ("RISC-V: Add perf platform driver based on SBI PMU extension")
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220830155306.301714-2-geomatsi@gmail.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Some calls to synthesis functions set err < 0 but only warn about the
failure and continue.  However they do not set err back to zero, relying
on subsequent code to do that.

That changed with the introduction of option --synth. When --synth=no
subsequent functions that set err back to zero are not called.

Fix by setting err = 0 in those cases.

Example:

 Before:

   $ perf record --no-bpf-event --synth=all -o /tmp/huh uname
   Couldn't synthesize bpf events.
   Linux
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
   $ perf record --no-bpf-event --synth=no -o /tmp/huh uname
   Couldn't synthesize bpf events.

 After:

   $ perf record --no-bpf-event --synth=no -o /tmp/huh uname
   Couldn't synthesize bpf events.
   Linux
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]

Fixes: 41b740b6 ("perf record: Add --synth option")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220907162458.72817-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

install(1), by default, installs with rwxr-xr-x permissions. Modify
perf's Makefile to pass '-m 644' when installing:

  * Documentation/tips.txt
  * examples/bpf/*
  * perf-completion.sh
  * perf_dlfilter.h header
  * scripts/perl/Perf-Trace-Util/lib/Perf/Trace/*
  * scripts/perl/*.pl
  * tests/attr/*
  * tests/attr.py
  * tests/shell/lib/*.sh
  * trace/strace/groups/*

All those are supposed to be non-executable. Either they are not scripts
at all, or they don't have shebang.

Signed-off-by: <jslaby@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908060426.9619-1-jslaby@suse.czSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit b91e5492 ("perf record: Add a dummy event on hybrid
systems to collect metadata records") adds a dummy event on hybrid
systems to fix the symbol "unknown" issue when the workload is created
in a P-core but runs on an E-core. The added dummy event will cause
"perf script -F iregs" to fail. Dummy events do not have "iregs"
attribute set, so when we do evsel__check_attr, the "iregs" attribute
check will fail, so the issue happened.

The following commit [1] has fixed a similar issue by skipping the attr
check for the dummy event because it does not have any samples anyway. It
works okay for the normal mode, but the issue still happened when running
the test in the pipe mode. In the pipe mode, it calls process_attr() which
still checks the attr for the dummy event. This commit fixed the issue by
skipping the attr check for the dummy event in the API evsel__check_attr,
Otherwise, we have to patch everywhere when evsel__check_attr() is called.

Before:

  #./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5
  Samples for 'dummy:HG' event do not have IREGS attribute set. Cannot print 'iregs' field.
  0x120 [0x90]: failed to process type: 64
  #

After:

  # ./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5
  ABI:2    CX:0x55b8efa87000    DX:0x55b8efa7e000    DI:0xffffba5e625efbb0    R8:0xffff90e51f8ae100
  ABI:2    CX:0x7f1dae1e4000    DX:0xd0    DI:0xffff90e18c675ac0    R8:0x71
  ABI:2    CX:0xcc0    DX:0x1    DI:0xffff90e199880240    R8:0x0
  ABI:2    CX:0xffff90e180dd7500    DX:0xffff90e180dd7500    DI:0xffff90e180043500    R8:0x1
  ABI:2    CX:0x50    DX:0xffff90e18c583bd0    DI:0xffff90e1998803c0    R8:0x58
  #

[1]https://lore.kernel.org/lkml/20220831124041.219925-1-jolsa@kernel.org/

Fixes: b91e5492 ("perf record: Add a dummy event on hybrid systems to collect metadata records")
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908070030.3455164-1-zhengjun.xing@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Before:
  # perf lock -h

   Usage: perf lock [<options>] {record|report|script|info|contention|contention}

      -D, --dump-raw-trace  dump raw trace in ASCII
      -f, --force           don't complain, do it
      -i, --input <file>    input file name
      -v, --verbose         be more verbose (show symbol address, etc)
          --kallsyms <file>
                            kallsyms pathname
          --vmlinux <file>  vmlinux pathname

After:
  # perf lock -h

   Usage: perf lock [<options>] {record|report|script|info|contention}

      -D, --dump-raw-trace  dump raw trace in ASCII
      -f, --force           don't complain, do it
      -i, --input <file>    input file name
      -v, --verbose         be more verbose (show symbol address, etc)
          --kallsyms <file>
                            kallsyms pathname
          --vmlinux <file>  vmlinux pathname

Fixes: 528b9cab ("perf lock: Add 'contention' subcommand")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908014854.151203-1-yangjihong1@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull spi fixes from Mark Brown:
 "Several fixes that came in since the merge window, the major one being
  a fix for the spi-mux driver which was broken by the performance
  optimisations due to it peering inside the core's data structures more
  than it should"

* tag 'spi-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi: Fix queue hang if previous transfer failed
  spi: mux: Fix mux interaction with fast path optimisations
  spi: cadence-quadspi: Disable irqs during indirect reads
  spi: bitbang: Fix lsb-first Rx

Merge tag 'regulator-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "One core fix here improving the error handling on enable failure, plus
  smaller fixes for the pfuze100 drive and the SPMI DT bindings"

* tag 'regulator-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Fix qcom,spmi-regulator schema
  regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe()
  regulator: core: Clean up on enable failure

Pull regmap fix from Mark Brown:
 "A fix for how we handle controller constraints on SPI message sizes,
  only impacting systems with SPI controllers with very low limits like
  the AMD controller used in the Steam Deck"

* tag 'regmap-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: spi: Reserve space for register address/padding

Avoid compiler warning about format %llu that expects long long unsigned
int but argument has type __u64.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: c3afd6e5 ("perf dlfilter: Add dlfilter-show-cycles")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220905074735.4513-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The offending commit removed mmap_per_thread(), which did not consider
the different set-output rules for per-thread mmaps i.e. in the per-thread
case set-output is used for file descriptors of the same thread not the
same cpu.

This was not immediately noticed because it only happens with
multi-threaded targets and we do not have a test for that yet.

Reinstate mmap_per_thread() expanding it to cover also system-wide per-cpu
events i.e. to continue to allow the mixing of per-thread and per-cpu
mmaps.

Debug messages (with -vv) show the file descriptors that are opened with
sys_perf_event_open. New debug messages are added (needs -vvv) that show
also which file descriptors are mmapped and which are redirected with
set-output.

In the per-cpu case (cpu != -1) file descriptors for the same CPU are
set-output to the first file descriptor for that CPU.

In the per-thread case (cpu == -1) file descriptors for the same thread are
set-output to the first file descriptor for that thread.

Example (process 17489 has 2 threads):

 Before (but with new debug prints):

   $ perf record --no-bpf-event -vvv --per-thread -p 17489
   <SNIP>
   sys_perf_event_open: pid 17489  cpu -1  group_fd -1  flags 0x8 = 5
   sys_perf_event_open: pid 17490  cpu -1  group_fd -1  flags 0x8 = 6
   <SNIP>
   libperf: idx 0: mmapping fd 5
   libperf: idx 0: set output fd 6 -> 5
   failed to mmap with 22 (Invalid argument)

 After:

   $ perf record --no-bpf-event -vvv --per-thread -p 17489
   <SNIP>
   sys_perf_event_open: pid 17489  cpu -1  group_fd -1  flags 0x8 = 5
   sys_perf_event_open: pid 17490  cpu -1  group_fd -1  flags 0x8 = 6
   <SNIP>
   libperf: mmap_per_thread: nr cpu values (may include -1) 1 nr threads 2
   libperf: idx 0: mmapping fd 5
   libperf: idx 1: mmapping fd 6
   <SNIP>
   [ perf record: Woken up 2 times to write data ]
   [ perf record: Captured and wrote 0.018 MB perf.data (15 samples) ]

Per-cpu example (process 20341 has 2 threads, same as above):

   $ perf record --no-bpf-event -vvv -p 20341
   <SNIP>
   sys_perf_event_open: pid 20341  cpu 0  group_fd -1  flags 0x8 = 5
   sys_perf_event_open: pid 20342  cpu 0  group_fd -1  flags 0x8 = 6
   sys_perf_event_open: pid 20341  cpu 1  group_fd -1  flags 0x8 = 7
   sys_perf_event_open: pid 20342  cpu 1  group_fd -1  flags 0x8 = 8
   sys_perf_event_open: pid 20341  cpu 2  group_fd -1  flags 0x8 = 9
   sys_perf_event_open: pid 20342  cpu 2  group_fd -1  flags 0x8 = 10
   sys_perf_event_open: pid 20341  cpu 3  group_fd -1  flags 0x8 = 11
   sys_perf_event_open: pid 20342  cpu 3  group_fd -1  flags 0x8 = 12
   sys_perf_event_open: pid 20341  cpu 4  group_fd -1  flags 0x8 = 13
   sys_perf_event_open: pid 20342  cpu 4  group_fd -1  flags 0x8 = 14
   sys_perf_event_open: pid 20341  cpu 5  group_fd -1  flags 0x8 = 15
   sys_perf_event_open: pid 20342  cpu 5  group_fd -1  flags 0x8 = 16
   sys_perf_event_open: pid 20341  cpu 6  group_fd -1  flags 0x8 = 17
   sys_perf_event_open: pid 20342  cpu 6  group_fd -1  flags 0x8 = 18
   sys_perf_event_open: pid 20341  cpu 7  group_fd -1  flags 0x8 = 19
   sys_perf_event_open: pid 20342  cpu 7  group_fd -1  flags 0x8 = 20
   <SNIP>
   libperf: mmap_per_cpu: nr cpu values 8 nr threads 2
   libperf: idx 0: mmapping fd 5
   libperf: idx 0: set output fd 6 -> 5
   libperf: idx 1: mmapping fd 7
   libperf: idx 1: set output fd 8 -> 7
   libperf: idx 2: mmapping fd 9
   libperf: idx 2: set output fd 10 -> 9
   libperf: idx 3: mmapping fd 11
   libperf: idx 3: set output fd 12 -> 11
   libperf: idx 4: mmapping fd 13
   libperf: idx 4: set output fd 14 -> 13
   libperf: idx 5: mmapping fd 15
   libperf: idx 5: set output fd 16 -> 15
   libperf: idx 6: mmapping fd 17
   libperf: idx 6: set output fd 18 -> 17
   libperf: idx 7: mmapping fd 19
   libperf: idx 7: set output fd 20 -> 19
   <SNIP>
   [ perf record: Woken up 7 times to write data ]
   [ perf record: Captured and wrote 0.020 MB perf.data (17 samples) ]

Fixes: ae4f8ae1 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps")
Reported-by: Tomáš Trnka <trnka@scm.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216441Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220905114209.8389-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'asoc-fix-v6.0-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.0

Quite a few fixes here, all driver specific and fairly small.

Pull networking fixes from Paolo Abeni:
 "Including fixes from rxrpc, netfilter, wireless and bluetooth
  subtrees.

  Current release - regressions:

   - skb: export skb drop reaons to user by TRACE_DEFINE_ENUM

   - bluetooth: fix regression preventing ACL packet transmission

  Current release - new code bugs:

   - dsa: microchip: fix kernel oops on ksz8 switches

   - dsa: qca8k: fix NULL pointer dereference for
     of_device_get_match_data

  Previous releases - regressions:

   - netfilter: clean up hook list when offload flags check fails

   - wifi: mt76: fix crash in chip reset fail

   - rxrpc: fix ICMP/ICMP6 error handling

   - ice: fix DMA mappings leak

   - i40e: fix kernel crash during module removal

  Previous releases - always broken:

   - ipv6: sr: fix out-of-bounds read when setting HMAC data.

   - tcp: TX zerocopy should not sense pfmemalloc status

   - sch_sfb: don't assume the skb is still around after
     enqueueing to child

   - netfilter: drop dst references before setting

   - wifi: wilc1000: fix DMA on stack objects

   - rxrpc: fix an insufficiently large sglist in
     rxkad_verify_packet_2()

   - fec: use a spinlock to guard `fep->ptp_clk_on`

  Misc:

   - usb: qmi_wwan: add Quectel RM520N"

* tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  sch_sfb: Also store skb len before calling child enqueue
  net: phy: lan87xx: change interrupt src of link_up to comm_ready
  net/smc: Fix possible access to freed memory in link clear
  net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb
  net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
  net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear
  net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set
  net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio
  net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet
  net: usb: qmi_wwan: add Quectel RM520N
  net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data
  tcp: fix early ETIMEDOUT after spurious non-SACK RTO
  stmmac: intel: Simplify intel_eth_pci_remove()
  net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()
  ipv6: sr: fix out-of-bounds read when setting HMAC data.
  bonding: accept unsolicited NA message
  bonding: add all node mcast address when slave up
  bonding: use unspecified address if no available link local address
  wifi: use struct_group to copy addresses
  wifi: mac80211_hwsim: check length for virtio packets
  ...

Commit d4252071 ("add barriers to buffer_uptodate and
set_buffer_uptodate") added proper memory barriers to the buffer head
BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date
will be guaranteed to actually see initialized state.

However, that commit didn't _just_ add the memory barrier, it also ended
up dropping the "was it already set" logic that the BUFFER_FNS() macro
had.

That's conceptually the right thing for a generic "this is a memory
barrier" operation, but in the case of the buffer contents, we really
only care about the memory barrier for the _first_ time we set the bit,
in that the only memory ordering protection we need is to avoid anybody
seeing uninitialized memory contents.

Any other access ordering wouldn't be about the BH_Uptodate bit anyway,
and would require some other proper lock (typically BH_Lock or the folio
lock).  A reader that races with somebody invalidating the buffer head
isn't an issue wrt the memory ordering, it's a serialization issue.

Now, you'd think that the buffer head operations don't matter in this
day and age (and I certainly thought so), but apparently some loads
still end up being heavy users of buffer heads.  In particular, the
kernel test robot reported that not having this bit access optimization
in place caused a noticeable direct IO performance regression on ext4:

  fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression

although you presumably need a fast disk and a lot of cores to actually
notice.

Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Fengwei Yin <fengwei.yin@intel.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull EFI fixes from Ard Biesheuvel:
 "A couple of low-priority EFI fixes:

   - prevent the randstruct plugin from re-ordering EFI protocol
     definitions

   - fix a use-after-free in the capsule loader

   - drop unused variable"

* tag 'efi-urgent-for-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: capsule-loader: Fix use-after-free in efi_capsule_write
  efi/x86: libstub: remove unused variable
  efi: libstub: Disable struct randomization

Cong Wang noticed that the previous fix for sch_sfb accessing the queued
skb after enqueueing it to a child qdisc was incomplete: the SFB enqueue
function was also calling qdisc_qstats_backlog_inc() after enqueue, which
reads the pkt len from the skb cb field. Fix this by also storing the skb
len, and using the stored value to increment the backlog after enqueueing.

Fixes: 9efd2329 ("sch_sfb: Don't assume the skb is still around after enqueueing to child")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220905192137.965549-1-toke@toke.dkSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Currently phy link up/down interrupt is enabled using the
LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function,
phy link is determined using the T1_MODE_STAT_REG register comm_ready bit.
comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status.
Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set
first but comm_ready bit takes some time to set based on local and
remote receiver status.
As per the current implementation, interrupt is triggered using link_up
but the comm_ready bit is still cleared in the read_status function. So,
link is always down.  Initially tested with the shared interrupt
mechanism with switch and internal phy which is working, but after
implementing interrupt controller it is not working.
It can fixed either by updating the read_status function to read from
LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for
comm_ready bit. But the validation team recommends the use of comm_ready
for link detection.
This patch fixes by enabling the comm_ready bit for link_up in the
LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in
LAN87xx_INTERRUPT_MASK register.

Fixes: 8a1b415d ("net: phy: added ethtool master-slave configuration support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220905152750.5079-1-arun.ramadoss@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

As reported[1] by Nathan, the recently added plpks driver will crash if
it's built into the kernel and booted on a non-pseries machine, eg
powernv:

  kernel BUG at arch/powerpc/kernel/syscall.c:39!
  Oops: Exception in kernel mode, sig: 5 [#1]
  LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
  ...
  NIP system_call_exception+0x90/0x3d0
  LR  system_call_common+0xec/0x250
  Call Trace:
    0xc0000000035c3e10 (unreliable)
    system_call_common+0xec/0x250
  --- interrupt: c00 at plpar_hcall+0x38/0x60
  NIP:  c0000000000e4300 LR: c00000000202945c CTR: 0000000000000000
  REGS: c0000000035c3e80 TRAP: 0c00   Not tainted  (6.0.0-rc4)
  MSR:  9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE>  CR: 28000284  XER: 00000000
  ...
  NIP plpar_hcall+0x38/0x60
  LR  pseries_plpks_init+0x64/0x23c
  --- interrupt: c00

On powernv Linux is the hypervisor, so a hypercall just ends up going to
the syscall path, which BUGs if the syscall (hypercall) didn't come from
userspace.

The fix is simply to not probe the plpks driver on non-pseries machines.

[1] https://lore.kernel.org/linuxppc-dev/Yxe06fbq18Wv9y3W@dev-arch.thelio-3990X/

Fixes: 2454a7af ("powerpc/pseries: define driver for Platform KeyStore")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Dan Horák <dan@danny.cz>
Reviewed-by: Dan Horák <dan@danny.cz>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220907065038.1604504-1-mpe@ellerman.id.au

A race condition may occur if the user calls close() on another thread
during a write() operation on the device node of the efi capsule.

This is a race condition that occurs between the efi_capsule_write() and
efi_capsule_flush() functions of efi_capsule_fops, which ultimately
results in UAF.

So, the page freeing process is modified to be done in
efi_capsule_release() instead of efi_capsule_flush().

Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

After modifying the QP to the Error state, all RX WR would be completed
with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not
wait for it is done, but destroy the QP and free the link group directly.
So there is a risk that accessing the freed memory in tasklet context.

Here is a crash example:

 BUG: unable to handle page fault for address: ffffffff8f220860
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060
 Oops: 0002 [#1] SMP PTI
 CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S         OE     5.10.0-0607+ #23
 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018
 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0
 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32
 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086
 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000
 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00
 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b
 R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010
 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040
 FS:  0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <IRQ>
  _raw_spin_lock_irqsave+0x30/0x40
  mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib]
  smc_wr_rx_tasklet_fn+0x56/0xa0 [smc]
  tasklet_action_common.isra.21+0x66/0x100
  __do_softirq+0xd5/0x29c
  asm_call_irq_on_stack+0x12/0x20
  </IRQ>
  do_softirq_own_stack+0x37/0x40
  irq_exit_rcu+0x9d/0xa0
  sysvec_call_function_single+0x34/0x80
  asm_sysvec_call_function_single+0x12/0x20

Fixes: bd4ad577 ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR")
Signed-off-by: Yacan Liu <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Even if max hash configured in hw in mtk_ppe_hash_entry is
MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in
mtk_ppe_check_skb routine

Fixes: c4f033d9 ("net: ethernet: mtk_eth_soc: rework hardware flow table management")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

As Eric reported, the 'reason' field is not presented when trace the
kfree_skb event by perf:

$ perf record -e skb:kfree_skb -a sleep 10
$ perf script
  ip_defrag 14605 [021]   221.614303:   skb:kfree_skb:
  skbaddr=0xffff9d2851242700 protocol=34525 location=0xffffffffa39346b1
  reason:

The cause seems to be passing kernel address directly to TP_printk(),
which is not right. As the enum 'skb_drop_reason' is not exported to
user space through TRACE_DEFINE_ENUM(), perf can't get the drop reason
string from the 'reason' field, which is a number.

Therefore, we introduce the macro DEFINE_DROP_REASON(), which is used
to define the trace enum by TRACE_DEFINE_ENUM(). With the help of
DEFINE_DROP_REASON(), now we can remove the auto-generate that we
introduced in the commit ec43908d
("net: skb: use auto-generation to convert skb drop reason to string"),
and define the string array 'drop_reasons'.

Hmmmm...now we come back to the situation that have to maintain drop
reasons in both enum skb_drop_reason and DEFINE_DROP_REASON. But they
are both in dropreason.h, which makes it easier.

After this commit, now the format of kfree_skb is like this:

$ cat /tracing/events/skb/kfree_skb/format
name: kfree_skb
ID: 1524
format:
        field:unsigned short common_type;       offset:0;       size:2; signed:0;
        field:unsigned char common_flags;       offset:2;       size:1; signed:0;
        field:unsigned char common_preempt_count;       offset:3;       size:1; signed:0;
        field:int common_pid;   offset:4;       size:4; signed:1;

        field:void * skbaddr;   offset:8;       size:8; signed:0;
        field:void * location;  offset:16;      size:8; signed:0;
        field:unsigned short protocol;  offset:24;      size:2; signed:0;
        field:enum skb_drop_reason reason;      offset:28;      size:4; signed:0;

print fmt: "skbaddr=%p protocol=%u location=%p reason: %s", REC->skbaddr, REC->protocol, REC->location, __print_symbolic(REC->reason, { 1, "NOT_SPECIFIED" }, { 2, "NO_SOCKET" } ......

Fixes: ec43908d ("net: skb: use auto-generation to convert skb drop reason to string")
Link: https://lore.kernel.org/netdev/CANn89i+bx0ybvE55iMYf5GJM48WwV1HNpdm9Q6t-HaEstqpCSA@mail.gmail.com/Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine.

Fixes: 33fc42de ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
Fixes for Felix DSA driver calculation of tc-taprio guard bands

This series fixes some bugs which are not quite new, but date from v5.13
when static guard bands were enabled by Michael Walle to prevent
tc-taprio overruns.

The investigation started when Xiaoliang asked privately what is the
expected max SDU for a traffic class when its minimum gate interval is
10 us. The answer, as it turns out, is not an L1 size of 1250 octets,
but 1245 octets, since otherwise, the switch will not consider frames
for egress scheduling, because the static guard band is exactly as large
as the time interval. The switch needs a minimum of 33 ns outside of the
guard band to consider a frame for scheduling, and the reduction of the
max SDU by 5 provides exactly for that.

The fix for that (patch 1/3) is relatively small, but during testing, it
became apparent that cut-through forwarding prevents oversized frame
dropping from working properly. This is solved through the larger patch
2/3. Finally, patch 3/3 fixes one more tc-taprio locking problem found
through code inspection.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The read-modify-write of QSYS_TAG_CONFIG from vsc9959_sched_speed_set()
runs unlocked with respect to the other functions that access it, which
are vsc9959_tas_guard_bands_update(), vsc9959_qos_port_tas_set() and
vsc9959_tas_clock_adjust(). All the others are under ocelot->tas_lock,
so move the vsc9959_sched_speed_set() access under that lock as well, to
resolve the concurrency.

Fixes: 55a515b1 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Experimentally, it looks like when QSYS_QMAXSDU_CFG_7 is set to 605,
frames even way larger than 601 octets are transmitted even though these
should be considered as oversized, according to the documentation, and
dropped.

Since oversized frame dropping depends on frame size, which is only
known at the EOF stage, and therefore not at SOF when cut-through
forwarding begins, it means that the switch cannot take QSYS_QMAXSDU_CFG_*
into consideration for traffic classes that are cut-through.

Since cut-through forwarding has no UAPI to control it, and the driver
enables it based on the mantra "if we can, then why not", the strategy
is to alter vsc9959_cut_through_fwd() to take into consideration which
tc's have oversize frame dropping enabled, and disable cut-through for
them. Then, from vsc9959_tas_guard_bands_update(), we re-trigger the
cut-through determination process.

There are 2 strategies for vsc9959_cut_through_fwd() to determine
whether a tc has oversized dropping enabled or not. One is to keep a bit
mask of traffic classes per port, and the other is to read back from the
hardware registers (a non-zero value of QSYS_QMAXSDU_CFG_* means the
feature is enabled). We choose reading back from registers, because
struct ocelot_port is shared with drivers (ocelot, seville) that don't
support either cut-through nor tc-taprio, and we don't have a felix
specific extension of struct ocelot_port. Furthermore, reading registers
from the Felix hardware is quite cheap, since they are memory-mapped.

Fixes: 55a515b1 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The blamed commit broke tc-taprio schedules such as this one:

tc qdisc replace dev $swp1 root taprio \
        num_tc 8 \
        map 0 1 2 3 4 5 6 7 \
        queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
        base-time 0 \
        sched-entry S 0x7f 990000 \
        sched-entry S 0x80  10000 \
        flags 0x2

because the gate entry for TC 7 (S 0x80 10000 ns) now has a static guard
band added earlier than its 'gate close' event, such that packet
overruns won't occur in the worst case of the largest packet possible.

Since guard bands are statically determined based on the per-tc
QSYS_QMAXSDU_CFG_* with a fallback on the port-based QSYS_PORT_MAX_SDU,
we need to discuss what happens with TC 7 depending on kernel version,
since the driver, prior to commit 55a515b1 ("net: dsa: felix: drop
oversized frames with tc-taprio instead of hanging the port"), did not
touch QSYS_QMAXSDU_CFG_*, and therefore relied on QSYS_PORT_MAX_SDU.

1 (before vsc9959_tas_guard_bands_update): QSYS_PORT_MAX_SDU defaults to
  1518, and at gigabit this introduces a static guard band (independent
  of packet sizes) of 12144 ns, plus QSYS::HSCH_MISC_CFG.FRM_ADJ (bit
  time of 20 octets => 160 ns). But this is larger than the time window
  itself, of 10000 ns. So, the queue system never considers a frame with
  TC 7 as eligible for transmission, since the gate practically never
  opens, and these frames are forever stuck in the TX queues and hang
  the port.

2 (after vsc9959_tas_guard_bands_update): Under the sole goal of
  enabling oversized frame dropping, we make an effort to set
  QSYS_QMAXSDU_CFG_7 to 1230 bytes. But QSYS_QMAXSDU_CFG_7 plays
  one more role, which we did not take into account: per-tc static guard
  band, expressed in L2 byte time (auto-adjusted for FCS and L1 overhead).
  There is a discrepancy between what the driver thinks (that there is
  no guard band, and 100% of min_gate_len[tc] is available for egress
  scheduling) and what the hardware actually does (crops the equivalent
  of QSYS_QMAXSDU_CFG_7 ns out of min_gate_len[tc]). In practice, this
  means that the hardware thinks it has exactly 0 ns for scheduling tc 7.

In both cases, even minimum sized Ethernet frames are stuck on egress
rather than being considered for scheduling on TC 7, even if they would
fit given a proper configuration. Considering the current situation,
with vsc9959_tas_guard_bands_update(), frames between 60 octets and 1230
octets in size are not eligible for oversized dropping (because they are
smaller than QSYS_QMAXSDU_CFG_7), but won't be considered as eligible
for scheduling either, because the min_gate_len[7] (10000 ns) minus the
guard band determined by QSYS_QMAXSDU_CFG_7 (1230 octets * 8 ns per
octet == 9840 ns) minus the guard band auto-added for L1 overhead by
QSYS::HSCH_MISC_CFG.FRM_ADJ (20 octets * 8 ns per octet == 160 octets)
leaves 0 ns for scheduling in the queue system proper.

Investigating the hardware behavior, it becomes apparent that the queue
system needs precisely 33 ns of 'gate open' time in order to consider a
frame as eligible for scheduling to a tc. So the solution to this
problem is to amend vsc9959_tas_guard_bands_update(), by giving the
per-tc guard bands less space by exactly 33 ns, just enough for one
frame to be scheduled in that interval. This allows the queue system to
make forward progress for that port-tc, and prevents it from hanging.

Fixes: 297c4de6 ("net: dsa: felix: re-enable TAS guard band mode")
Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The recent commit c11117b6 ("ALSA: usb-audio: Refcount multiple
accesses on the single clock") tries to manage the clock rate shared
by several endpoints.  This was intended for avoiding the unmatched
rate by a different endpoint, but unfortunately, it introduced a
regression for PulseAudio and pipewire, too; those applications try to
probe the multiple possible rates (44.1k and 48kHz) and setting up the
normal rate fails but only the last rate is applied.

The cause is that the last sample rate is still left to the clock
reference even after closing the endpoint, and this value is still
used at the next open.  It happens only when applications set up via
PCM prepare but don't start/stop the stream; the rate is reset when
the stream is stopped, but it's not cleared at close.

This patch addresses the issue above, simply by clearing the rate set
in the clock reference at the last close of each endpoint.

Fixes: c11117b6 ("ALSA: usb-audio: Refcount multiple accesses on the single clock")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/YxXIWv8dYmg1tnXP@zx2c4.com/
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2620
Link: https://lore.kernel.org/r/20220907100421.6443-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The variable "has_system_memory" is unused in function
‘adjust_memory_range_protection’, remove it.
Signed-off-by: chen zhang <chenzhang@kylinos.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The voice allocator sometimes begins allocating from near the end of the
array and then wraps around, however snd_emu10k1_pcm_channel_alloc()
accesses the newly allocated voices as if it never wrapped around.

This results in out of bounds access if the first voice has a high enough
index so that first_voice + requested_voice_count > NUM_G (64).
The more voices are requested, the more likely it is for this to occur.

This was initially discovered using PipeWire, however it can be reproduced
by calling aplay multiple times with 16 channels:
aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero

UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40
index 65 is out of range for type 'snd_emu10k1_voice [64]'
CPU: 1 PID: 31977 Comm: aplay Tainted: G        W IOE      6.0.0-rc2-emu10k1+ #7
Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002    07/22/2010
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x3f
__ubsan_handle_out_of_bounds.cold+0x44/0x49
snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1]
snd_pcm_hw_params+0x29f/0x600 [snd_pcm]
snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm]
? exit_to_user_mode_prepare+0x35/0x170
? do_syscall_64+0x69/0x90
? syscall_exit_to_user_mode+0x26/0x50
? do_syscall_64+0x69/0x90
? exit_to_user_mode_prepare+0x35/0x170
snd_pcm_ioctl+0x27/0x40 [snd_pcm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3707dcab-320a-62ff-63c0-73fc201ef756@tasossah.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add missing __init/__exit annotations to module init/exit funcs.

Link: https://lkml.kernel.org/r/20220906141210.132607-1-xiujianfeng@huawei.com

Fixes: 135b881e ("rv/reactor: Add the printk reactor")
Fixes: e88043c0 ("rv/reactor: Add the panic reactor")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>