- 20 Sep, 2023 3 commits
-
-
Cai Huoqing authored
'hwdev' is checked too late and hwdev will not be NULL, so remove the check Fixes: 2acf960e ("net: hinic: Add support for configuration of rx-vlan-filter by ethtool") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202309112354.pikZCmyk-lkp@intel.com/Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Benjamin Poirier authored
There are some attributes added by vxlan_fill_info() which are not accounted for in vxlan_get_size(). Add them. I didn't find a way to trigger an actual problem from this miscalculation since there is usually extra space in netlink size calculations like if_nlmsg_size(); but maybe I just didn't search long enough. Fixes: 3511494c ("vxlan: Group Policy extension") Fixes: e1e5314d ("vxlan: implement GPE") Fixes: 0ace2ca8 ("vxlan: Use checksum partial with remote checksum offload") Fixes: f9c4bb0b ("vxlan: vni filtering support on collect metadata device") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Artem Chernyshev authored
In rds_rdma_cm_event_handler_cmn() check, if conn pointer exists before dereferencing it as rdma_set_service_type() argument Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: fd261ce6 ("rds: rdma: update rdma transport for tos") Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Sep, 2023 9 commits
-
-
Ziyang Xuan authored
Get a null-ptr-deref bug as follows with reproducer [1]. BUG: kernel NULL pointer dereference, address: 0000000000000228 ... RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q] ... Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x150 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? vlan_dev_hard_header+0x35/0x140 [8021q] ? vlan_dev_hard_header+0x8e/0x140 [8021q] neigh_connected_output+0xb2/0x100 ip6_finish_output2+0x1cb/0x520 ? nf_hook_slow+0x43/0xc0 ? ip6_mtu+0x46/0x80 ip6_finish_output+0x2a/0xb0 mld_sendpack+0x18f/0x250 mld_ifc_work+0x39/0x160 process_one_work+0x1e6/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 [1] $ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}' $ ip link add name t-dummy type dummy $ ip link add link t-dummy name t-dummy.100 type vlan id 100 $ ip link add name t-nlmon type nlmon $ ip link set t-nlmon master team0 $ ip link set t-nlmon nomaster $ ip link set t-dummy up $ ip link set team0 up $ ip link set t-dummy.100 down $ ip link set t-dummy.100 master team0 When enslave a vlan device to team device and team device type is changed from non-ether to ether, header_ops of team device is changed to vlan_header_ops. That is incorrect and will trigger null-ptr-deref for vlan->real_dev in vlan_dev_hard_header() because team device is not a vlan device. Cache eth_header_ops in team_setup(), then assign cached header_ops to header_ops of team net device when its type is changed from non-ether to ether to fix the bug. Fixes: 1d76efe1 ("team: add support for non-ethernet devices") Suggested-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Eric Dumazet authored
syzbot/KCSAN reported data-races in br_handle_frame_finish() [1] This function can run from multiple cpus without mutual exclusion. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Handles updates to dev->stats.tx_dropped while we are at it. [1] BUG: KCSAN: data-race in br_handle_frame_finish / br_handle_frame_finish read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 1: br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189 br_nf_hook_thresh+0x1ed/0x220 br_nf_pre_routing_finish_ipv6+0x50f/0x540 NF_HOOK include/linux/netfilter.h:304 [inline] br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178 br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508 nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline] nf_hook_bridge_pre net/bridge/br_input.c:272 [inline] br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417 __netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417 __netif_receive_skb_one_core net/core/dev.c:5521 [inline] __netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637 process_backlog+0x21f/0x380 net/core/dev.c:5965 __napi_poll+0x60/0x3b0 net/core/dev.c:6527 napi_poll net/core/dev.c:6594 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6727 __do_softirq+0xc1/0x265 kernel/softirq.c:553 run_ksoftirqd+0x17/0x20 kernel/softirq.c:921 smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164 kthread+0x1d7/0x210 kernel/kthread.c:388 ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 0: br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189 br_nf_hook_thresh+0x1ed/0x220 br_nf_pre_routing_finish_ipv6+0x50f/0x540 NF_HOOK include/linux/netfilter.h:304 [inline] br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178 br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508 nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline] nf_hook_bridge_pre net/bridge/br_input.c:272 [inline] br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417 __netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417 __netif_receive_skb_one_core net/core/dev.c:5521 [inline] __netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637 process_backlog+0x21f/0x380 net/core/dev.c:5965 __napi_poll+0x60/0x3b0 net/core/dev.c:6527 napi_poll net/core/dev.c:6594 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6727 __do_softirq+0xc1/0x265 kernel/softirq.c:553 do_softirq+0x5e/0x90 kernel/softirq.c:454 __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] batadv_tt_local_purge+0x1a8/0x1f0 net/batman-adv/translation-table.c:1356 batadv_tt_purge+0x2b/0x630 net/batman-adv/translation-table.c:3560 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703 worker_thread+0x525/0x730 kernel/workqueue.c:2784 kthread+0x1d7/0x210 kernel/kthread.c:388 ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 value changed: 0x00000000000d7190 -> 0x00000000000d7191 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 14848 Comm: kworker/u4:11 Not tainted 6.6.0-rc1-syzkaller-00236-gad8a69f3 #0 Fixes: 1c29fc49 ("[BRIDGE]: keep track of received multicast packets") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@nvidia.com> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: bridge@lists.linux-foundation.org Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230918091351.1356153-1-edumazet@google.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Jijie Shao says: ==================== There are some bugfix for the HNS3 ethernet driver ==================== Link: https://lore.kernel.org/r/20230918074840.2650978-1-shaojijie@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jie Wang authored
Currently the reset process in hns3 and firmware watchdog init process is asynchronous. we think firmware watchdog initialization is completed before hns3 clear the firmware interrupt source. However, firmware initialization may not complete early. so we add delay before hns3 clear firmware interrupt source and 5 ms delay is enough to avoid second firmware reset interrupt. Fixes: c1a81619 ("net: hns3: Add mailbox interrupt handling to PF driver") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jijie Shao authored
Firmware does not respond driver commands during reset Therefore, rule will fail to delete while the firmware is resetting So, if failed to delete rule, set rule state to TO_DEL, and the rule will be deleted when periodic task being scheduled. Fixes: 0205ec04 ("net: hns3: add support for hw tc offload of tc flower") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jian Shen authored
Currently, the driver will enable unicast promisc for the function once configure mac address fail. It's unreasonable when the failure is caused by using same mac address with other functions. So only enable unicast promisc when mac table full. Fixes: c631c696 ("net: hns3: refactor the promisc mode setting") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jie Wang authored
The device_version V3 hardware can't offload the checksum for IP in GRE packets, but can do it for NvGRE. So default to disable the checksum and GSO offload for GRE, but keep the ability to enable it when only using NvGRE. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jie Wang authored
When the vf cmdq is disabled, there is no need to keep these task running. So this patch skip these task when the cmdq is disabled. Fixes: ff200099 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jisheng Zhang authored
commit 133466c3 ("net: stmmac: use per-queue 64 bit statistics where necessary") caused one regression as found by Uwe, the backtrace looks like: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc1-00449-g133466c3-dirty #21 Hardware name: STM32 (Device Tree Support) unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x60/0x90 dump_stack_lvl from register_lock_class+0x98c/0x99c register_lock_class from __lock_acquire+0x74/0x293c __lock_acquire from lock_acquire+0x134/0x398 lock_acquire from stmmac_get_stats64+0x2ac/0x2fc stmmac_get_stats64 from dev_get_stats+0x44/0x130 dev_get_stats from rtnl_fill_stats+0x38/0x120 rtnl_fill_stats from rtnl_fill_ifinfo+0x834/0x17f4 rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xc0/0x144 rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x50/0x88 rtmsg_ifinfo from __dev_notify_flags+0xc0/0xec __dev_notify_flags from dev_change_flags+0x50/0x5c dev_change_flags from ip_auto_config+0x2f4/0x1260 ip_auto_config from do_one_initcall+0x70/0x35c do_one_initcall from kernel_init_freeable+0x2ac/0x308 kernel_init_freeable from kernel_init+0x1c/0x138 kernel_init from ret_from_fork+0x14/0x2c The reason is the rxq|txq_stats structures are not what expected because stmmac_open() -> __stmmac_open() the structure is overwritten by "memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));" This causes the well initialized syncp member of rxq|txq_stats is overwritten unexpectedly as pointed out by Johannes and Uwe. Fix this issue by moving rxq|txq_stats back to stmmac_extra_stats. For SMP cache friendly, we also mark stmmac_txq_stats and stmmac_rxq_stats as ____cacheline_aligned_in_smp. Fixes: 133466c3 ("net: stmmac: use per-queue 64 bit statistics where necessary") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230917165328.3403-1-jszhang@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
- 18 Sep, 2023 22 commits
-
-
David S. Miller authored
Peter Lafreniere says: ==================== ax25: Update link for linux-ax25.org http://linux-ax25.org has been down for nearly a year. Its official replacement is https://linux-ax25.in-berlin.de. Update all references to the dead link to its replacement. As the three touched files are in different areas of the tree, this is being sent with one patch per file. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Lafreniere authored
http://linux-ax25.org has been down for nearly a year. Its official replacement is https://linux-ax25.in-berlin.de. Change all references to the old site in the ax25 Kconfig to its replacement. Link: https://marc.info/?m=166792551600315Signed-off-by: Peter Lafreniere <peter@n8pjl.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Lafreniere authored
http://linux-ax25.org has been down for nearly a year. Its official replacement is https://linux-ax25.in-berlin.de. Update all links to the new URL. Link: https://marc.info/?m=166792551600315Signed-off-by: Peter Lafreniere <peter@n8pjl.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Lafreniere authored
http://linux-ax25.org has been down for nearly a year. Its official replacement is https://linux-ax25.in-berlin.de. Update the documentation to point there instead. And acknowledge that while the linux-hams list isn't entirely dead, it isn't what most would call 'active'. Remove that word. Link: https://marc.info/?m=166792551600315Signed-off-by: Peter Lafreniere <peter@n8pjl.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Matthieu Baerts says: ==================== mptcp: fix stalled connections Daire reported a few issues with MPTCP where some connections were stalled in different states. Paolo did a great job fixing them. Patch 1 fixes bogus receive window shrinkage with multiple subflows. Due to a race condition and unlucky circumstances, that may lead to TCP-level window shrinkage, and the connection being stalled on the sender end. Patch 2 is a preparation for patch 3 which processes pending subflow errors on close. Without that and under specific circumstances, the MPTCP-level socket might not switch to the CLOSE state and stall. Patch 4 is also a preparation patch for the next one. Patch 5 fixes MPTCP connections not switching to the CLOSE state when all subflows have been closed but no DATA_FIN have been exchanged to explicitly close the MPTCP connection. Now connections in such state will switch to the CLOSE state after a timeout, still allowing the "make-after-break" feature but making sure connections don't stall forever. It will be possible to modify this timeout -- currently matching TCP TIMEWAIT value (60 seconds) -- in a future version. ==================== Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
-
Paolo Abeni authored
According to RFC 8684 section 3.3: A connection is not closed unless [...] or an implementation-specific connection-level send timeout. Currently the MPTCP protocol does not implement such timeout, and connection timing-out at the TCP-level never move to close state. Introduces a catch-up condition at subflow close time to move the MPTCP socket to close, too. That additionally allows removing similar existing inside the worker. Finally, allow some additional timeout for plain ESTABLISHED mptcp sockets, as the protocol allows creating new subflows even at that point and making the connection functional again. This issue is actually present since the beginning, but it is basically impossible to solve without a long chain of functional pre-requisites topped by commit bbd49d11 ("mptcp: consolidate transition to TCP_CLOSE in mptcp_do_fastclose()"). When backporting this current patch, please also backport this other commit as well. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/430 Fixes: e16163b6 ("mptcp: refactor shutdown and close") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
The msk socket uses to different timeout to track close related events and retransmissions. The existing helpers do not indicate clearly which timer they actually touch, making the related code quite confusing. Change the existing helpers name to avoid such confusion. No functional change intended. This patch is linked to the next one ("mptcp: fix dangling connection hang-up"). The two patches are supposed to be backported together. Cc: stable@vger.kernel.org # v5.11+ Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
On incoming TCP reset, subflow closing could happen before error propagation. That in turn could cause the socket error being ignored, and a missing socket state transition, as reported by Daire-Byrne. Address the issues explicitly checking for subflow socket error at close time. To avoid code duplication, factor-out of __mptcp_error_report() a new helper implementing the relevant bits. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/429 Fixes: 15cc1045 ("mptcp: deliver ssk errors to msk") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
This will simplify the next patch ("mptcp: process pending subflow error on close"). No functional change intended. Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
In case multiple subflows race to update the mptcp-level receive window, the subflow losing the race should use the window value provided by the "winning" subflow to update it's own tcp-level rcv_wnd. To such goal, the current code bogusly uses the mptcp-level rcv_wnd value as observed before the update attempt. On unlucky circumstances that may lead to TCP-level window shrinkage, and stall the other end. Address the issue feeding to the rcv wnd update the correct value. Fixes: f3589be0 ("mptcp: never shrink offered window") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/427Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Gerhard Engleder says: ==================== tsnep: Fixes based on napi.rst Based on the documentation networking/napi.rst some fixes have been done. tsnep driver should be in line with this new documentation after these fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gerhard Engleder authored
According to the NAPI documentation networking/napi.rst, Rx specific APIs like page pool and XDP cannot be used at all when budget is 0. skb Tx processing should happen regardless of the budget. Stop NAPI polling after Tx processing and skip Rx processing if budget is 0. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gerhard Engleder authored
According to the NAPI documentation networking/napi.rst, for the ethtool API a channel is a IRQ/NAPI which services queues of a given type. tsnep uses a single IRQ/NAPI instance for every TX/RX queue pair. Therefore, combined channels shall be returned instead of separate tx/rx channels. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gerhard Engleder authored
According to the NAPI documentation networking/napi.rst, drivers which have to mask interrupts explicitly should use the napi_schedule_prep() and __napi_schedule() calls. No problem seen so far with current implementation. Nevertheless, let's align the implementation with documentation. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sebastian Andrzej Siewior says: ==================== net: hsr: Properly parse HSRv1 supervisor frames. this is a follow-up to https://lore.kernel.org/all/20230825153111.228768-1-lukma@denx.de/ replacing https://lore.kernel.org/all/20230914124731.1654059-1-lukma@denx.de/ by grabing/ adding tags and reposting with a commit message plus a missing __packed to a struct (#2) plus extending the testsuite to sover HSRv1 which is what broke here (#3-#5). HSRv0 is (was) not affected. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sebastian Andrzej Siewior authored
The testsuite already has simply tests for HSRv0. The testuite would have been able to notice the v1 breakage if it was there at the time. Extend the testsuite to also cover HSRv1. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sebastian Andrzej Siewior authored
Move the code and group into functions so it will be easier to extend the test to HSRv1 so that both versions are covered. Move the ping/test part into do_complete_ping_test() and the interface setup into setup_hsr_interfaces(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sebastian Andrzej Siewior authored
The timeout in the while loop is never subtracted due wrong usage of `let' leading to an endless loop if the former condition never gets true. Put the statement for let in quotes so it is parsed as a single statement. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sebastian Andrzej Siewior authored
Struct hsr_sup_tlv describes HW layout and therefore it needs a __packed attribute to ensure the compiler does not add any padding. Due to the size and __packed attribute of the structs that use hsr_sup_tlv it has no functional impact. Add __packed to struct hsr_sup_tlv. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lukasz Majewski authored
While adding support for parsing the redbox supervision frames, the author added `pull_size' and `total_pull_size' to track the amount of bytes that were pulled from the skb during while parsing the skb so it can be reverted/ pushed back at the end. In the process probably copy&paste error occurred and for the HSRv1 case the ethhdr was used instead of the hsr_tag. Later the hsr_tag was used instead of hsr_sup_tag. The later error didn't matter because both structs have the size so HSRv0 was still working. It broke however HSRv1 parsing because struct ethhdr is larger than struct hsr_tag. Reinstate the old pulling flow and pull first ethhdr, hsr_tag in v1 case followed by hsr_sup_tag. [bigeasy: commit message] Fixes: eafaa88b ("net: hsr: Add support for redbox supervision frames")' Suggested-by: Tristram.Ha@microchip.com Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
dh->dccph_x is the 9th byte (offset 8) in "struct dccp_hdr", not in the "byte 7" as Jann claimed. We need to make sure the ICMP messages are big enough, using more standard ways (no more assumptions). syzbot reported: BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2667 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2681 [inline] BUG: KMSAN: uninit-value in dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94 pskb_may_pull_reason include/linux/skbuff.h:2667 [inline] pskb_may_pull include/linux/skbuff.h:2681 [inline] dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94 icmpv6_notify+0x4c7/0x880 net/ipv6/icmp.c:867 icmpv6_rcv+0x19d5/0x30d0 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:304 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:304 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5523 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637 netif_receive_skb_internal net/core/dev.c:5723 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5782 tun_rx_batched+0x83b/0x920 tun_get_user+0x564c/0x6940 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1985 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x15c0 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6313 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x23cf/0x6940 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1985 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x15c0 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 4995 Comm: syz-executor153 Not tainted 6.6.0-rc1-syzkaller-00014-ga747acc0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Fixes: 977ad86c ("dccp: Fix out of bounds access in DCCP error handler") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jann Horn <jannh@google.com> Reviewed-by: Jann Horn <jannh@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Johnathan Mantey authored
Report the carrier/no-carrier state for the network interface shared between the BMC and the passthrough channel. Without this functionality the BMC is unable to reconfigure the NIC in the event of a re-cabling to a different subnet. Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Sep, 2023 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-David S. Miller authored
queue Tony Nguyen says: ==================== This series contains updates to iavf and i40e drivers. Radoslaw prevents admin queue operations being added when the driver is being removed for iavf. Petr Oros immediately starts reconfiguration on changes to VLANs on iavf. Ivan Vecera moves reset of VF to occur after port VLAN values are set on i40e. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Nothing prevents iscsi_sw_tcp_conn_bind() to receive file descriptor pointing to non TCP socket (af_unix for example). Return -EINVAL if this is attempted, instead of crashing the kernel. Fixes: 7ba24713 ("[SCSI] open-iscsi/linux-iscsi-5 Initiator: Initiator code") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Chris Leech <cleech@redhat.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: open-iscsi@googlegroups.com Cc: linux-scsi@vger.kernel.org Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kyle Zeng authored
Currently, we assume the skb is associated with a device before calling __ip_options_compile, which is not always the case if it is re-routed by ipvs. When skb->dev is NULL, dev_net(skb->dev) will become null-dereference. This patch adds a check for the edge case and switch to use the net_device from the rtable when skb->dev is NULL. Fixes: ed0de45a ("ipv4: recompile ip options in ipv4_link_failure") Suggested-by: David Ahern <dsahern@kernel.org> Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Cc: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Sep, 2023 3 commits
-
-
Vinicius Costa Gomes authored
When an XDP redirect happens before the link is ready, that transmission will not finish and will timeout, causing an adapter reset. If the redirects do not stop, the adapter will not stop resetting. Wait for the driver to signal that there's a carrier before allowing transmissions to proceed. Previous code was relying that when __IGC_DOWN is cleared, the NIC is ready to transmit as all the queues are ready, what happens is that the carrier presence will only be signaled later, after the watchdog workqueue has a chance to run. And during this interval (between clearing __IGC_DOWN and the watchdog running) if any transmission happens the timeout is emitted (detected by igc_tx_timeout()) which causes the reset, with the potential for the infinite loop. Fixes: 4ff32036 ("igc: Add support for XDP_REDIRECT action") Reported-by: Ferenc Fejes <ferenc.fejes@ericsson.com> Closes: https://lore.kernel.org/netdev/0caf33cf6adb3a5bf137eeaa20e89b167c9986d5.camel@ericsson.com/Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Ferenc Fejes <ferenc.fejes@ericsson.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
Use bitmap_zalloc() and bitmap_free() instead of hand-writing them. It is less verbose and it improves the type checking and semantic. While at it, add missing header inclusion (should be bitops.h, but with the above change it becomes bitmap.h). Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230911154534.4174265-1-andriy.shevchenko@linux.intel.comSigned-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Christensen authored
The ionic device supports a maximum buffer length of 16 bits (see ionic_rxq_desc or ionic_rxq_sg_elem). When adding new buffers to the receive rings, the function ionic_rx_fill() uses 16bit math when calculating the number of pages to allocate for an RX descriptor, given the interface's MTU setting. If the system PAGE_SIZE >= 64KB, and the buf_info->page_offset is 0, the remain_len value will never decrement from the original MTU value and the frag_len value will always be 0, causing additional pages to be allocated as scatter- gather elements unnecessarily. A similar math issue exists in ionic_rx_frags(), but no failures have been observed here since a 64KB page should not normally require any scatter-gather elements at any legal Ethernet MTU size. Fixes: 4b0a7539 ("ionic: implement Rx page reuse") Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-