Skip to content

L
linux
Switch branch/tag
  1. 19 Jun, 2021 10 commits
    • Oleksij Rempel's avatar
      can: j1939: j1939_sk_init(): set SOCK_RCU_FREE to call sk_destruct() after RCU is done · 22c696fe
      Oleksij Rempel authored 
      Set SOCK_RCU_FREE to let RCU to call sk_destruct() on completion.
Without this patch, we will run in to j1939_can_recv() after priv was
freed by j1939_sk_release()->j1939_sk_sock_destruct()

Fixes: 25fe97cb ("can: j1939: move j1939_priv_put() into sk_destruct callback")
Link: https://lore.kernel.org/r/20210617130623.12705-1-o.rempel@pengutronix.de
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: default avatarThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reported-by: syzbot+bdf710cfc41c186fdff3@syzkaller.appspotmail.com
Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      22c696fe
    • Oliver Hartkopp's avatar
      can: isotp: isotp_release(): omit unintended hrtimer restart on socket release · 14a4696b
      Oliver Hartkopp authored 
      When closing the isotp socket, the potentially running hrtimers are
canceled before removing the subscription for CAN identifiers via
can_rx_unregister().

This may lead to an unintended (re)start of a hrtimer in
isotp_rcv_cf() and isotp_rcv_fc() in the case that a CAN frame is
received by isotp_rcv() while the subscription removal is processed.

However, isotp_rcv() is called under RCU protection, so after calling
can_rx_unregister, we may call synchronize_rcu in order to wait for
any RCU read-side critical sections to finish. This prevents the
reception of CAN frames after hrtimer_cancel() and therefore the
unintended (re)start of the hrtimers.

Link: https://lore.kernel.org/r/20210618173713.2296-1-socketcan@hartkopp.net
Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: default avatarOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      14a4696b
    • Oliver Hartkopp's avatar
      can: gw: synchronize rcu operations before removing gw job entry · fb8696ab
      Oliver Hartkopp authored 
      can_can_gw_rcv() is called under RCU protection, so after calling
can_rx_unregister(), we have to call synchronize_rcu in order to wait
for any RCU read-side critical sections to finish before removing the
kmem_cache entry with the referenced gw job entry.

Link: https://lore.kernel.org/r/20210618173645.2238-1-socketcan@hartkopp.net
Fixes: c1aabdf3 ("can-gw: add netlink based CAN routing")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: default avatarOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      fb8696ab
    • Thadeu Lima de Souza Cascardo's avatar
      can: bcm: delay release of struct bcm_op after synchronize_rcu() · d5f9023f
      Thadeu Lima de Souza Cascardo authored 
      can_rx_register() callbacks may be called concurrently to the call to
can_rx_unregister(). The callbacks and callback data, though, are
protected by RCU and the struct sock reference count.

So the callback data is really attached to the life of sk, meaning
that it should be released on sk_destruct. However, bcm_remove_op()
calls tasklet_kill(), and RCU callbacks may be called under RCU
softirq, so that cannot be used on kernels before the introduction of
HRTIMER_MODE_SOFT.

However, bcm_rx_handler() is called under RCU protection, so after
calling can_rx_unregister(), we may call synchronize_rcu() in order to
wait for any RCU read-side critical sections to finish. That is,
bcm_rx_handler() won't be called anymore for those ops. So, we only
free them, after we do that synchronize_rcu().

Fixes: ffd980f9 ("[CAN]: Add broadcast manager (bcm) protocol")
Link: https://lore.kernel.org/r/20210619161813.2098382-1-cascardo@canonical.com
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: syzbot+0f7e7e5e2f4f40fa89c0@syzkaller.appspotmail.com
Reported-by: default avatarNorbert Slusarek <nslusarek@gmx.net>
Signed-off-by: default avatarThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: default avatarOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      d5f9023f
    • David S. Miller's avatar
      Merge branch 'ezchip-fixes' · dda2626b
      David S. Miller authored 
      Pavel Skripkin says:

====================
net: ethernat: ezchip: bug fixing and code improvments

While manual code reviewing, I found some error in ezchip driver.
Two of them looks very dangerous:
  1. use-after-free in nps_enet_remove
      Accessing netdev private data after free_netdev()

  2. wrong error handling of platform_get_irq()
      It can cause passing negative irq to request_irq()

Also, in 2nd patch I removed redundant check to increase execution
speed and make code more straightforward.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dda2626b
    • Pavel Skripkin's avatar
      net: ethernet: ezchip: fix error handling · 0de449d5
      Pavel Skripkin authored 
      As documented at drivers/base/platform.c for platform_get_irq:

 * Gets an IRQ for a platform device and prints an error message if finding the
 * IRQ fails. Device drivers should check the return value for errors so as to
 * not pass a negative integer value to the request_irq() APIs.

So, the driver should check that platform_get_irq() return value
is _negative_, not that it's equal to zero, because -ENXIO (return
value from request_irq() if irq was not found) will
pass this check and it leads to passing negative irq to request_irq()

Fixes: 0dd07709 ("NET: Add ezchip ethernet driver")
Signed-off-by: default avatarPavel Skripkin <paskripkin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0de449d5
    • Pavel Skripkin's avatar
      net: ethernet: ezchip: remove redundant check · 4ae85b23
      Pavel Skripkin authored 
      err varibale will be set everytime, when code gets
into this path. This check will just slowdown the execution
and that's all.

Fixes: 0dd07709 ("NET: Add ezchip ethernet driver")
Signed-off-by: default avatarPavel Skripkin <paskripkin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4ae85b23
    • Pavel Skripkin's avatar
      net: ethernet: ezchip: fix UAF in nps_enet_remove · e4b8700e
      Pavel Skripkin authored 
      priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after netif_napi_del()
call.

Fixes: 0dd07709 ("NET: Add ezchip ethernet driver")
Signed-off-by: default avatarPavel Skripkin <paskripkin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e4b8700e
    • Pavel Skripkin's avatar
      net: ethernet: aeroflex: fix UAF in greth_of_remove · e3a5de6d
      Pavel Skripkin authored 
      static int greth_of_remove(struct platform_device *of_dev)
{
...
	struct greth_private *greth = netdev_priv(ndev);
...
	unregister_netdev(ndev);
	free_netdev(ndev);

	of_iounmap(&of_dev->resource[0], greth->regs, resource_size(&of_dev->resource[0]));
...
}

greth is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing greth
pointer. So, fix it by moving free_netdev() after of_iounmap()
call.

Fixes: d4c41139 ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver")
Signed-off-by: default avatarPavel Skripkin <paskripkin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e3a5de6d
    • Linus Torvalds's avatar
      Merge tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 9ed13a17
      Linus Torvalds authored 
      Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.13-rc7, including fixes from wireless, bpf,
  bluetooth, netfilter and can.

  Current release - regressions:

   - mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
     to fix modifying offloaded qdiscs

   - lantiq: net: fix duplicated skb in rx descriptor ring

   - rtnetlink: fix regression in bridge VLAN configuration, empty info
     is not an error, bot-generated "fix" was not needed

   - libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix umem
     creation

  Current release - new code bugs:

   - ethtool: fix NULL pointer dereference during module EEPROM dump via
     the new netlink API

   - mlx5e: don't update netdev RQs with PTP-RQ, the special purpose
     queue should not be visible to the stack

   - mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs

   - mlx5e: verify dev is present in get devlink port ndo, avoid a panic

  Previous releases - regressions:

   - neighbour: allow NUD_NOARP entries to be force GCed

   - further fixes for fallout from reorg of WiFi locking (staging:
     rtl8723bs, mac80211, cfg80211)

   - skbuff: fix incorrect msg_zerocopy copy notifications

   - mac80211: fix NULL ptr deref for injected rate info

   - Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs

  Previous releases - always broken:

   - bpf: more speculative execution fixes

   - netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local

   - udp: fix race between close() and udp_abort() resulting in a panic

   - fix out of bounds when parsing TCP options before packets are
     validated (in netfilter: synproxy, tc: sch_cake and mptcp)

   - mptcp: improve operation under memory pressure, add missing
     wake-ups

   - mptcp: fix double-lock/soft lookup in subflow_error_report()

   - bridge: fix races (null pointer deref and UAF) in vlan tunnel
     egress

   - ena: fix DMA mapping function issues in XDP

   - rds: fix memory leak in rds_recvmsg

  Misc:

   - vrf: allow larger MTUs

   - icmp: don't send out ICMP messages with a source address of 0.0.0.0

   - cdc_ncm: switch to eth%d interface naming"

* tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (139 commits)
  net: ethernet: fix potential use-after-free in ec_bhf_remove
  selftests/net: Add icmp.sh for testing ICMP dummy address responses
  icmp: don't send out ICMP messages with a source address of 0.0.0.0
  net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY
  net: ll_temac: Fix TX BD buffer overwrite
  net: ll_temac: Add memory-barriers for TX BD access
  net: ll_temac: Make sure to free skb when it is completely used
  MAINTAINERS: add Guvenc as SMC maintainer
  bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path
  bnxt_en: Fix TQM fastpath ring backing store computation
  bnxt_en: Rediscover PHY capabilities after firmware reset
  cxgb4: fix wrong shift.
  mac80211: handle various extensible elements correctly
  mac80211: reset profile_periodicity/ema_ap
  cfg80211: avoid double free of PMSR request
  cfg80211: make certificate generation more robust
  mac80211: minstrel_ht: fix sample time check
  net: qed: Fix memcpy() overflow of qed_dcbx_params()
  net: cdc_eem: fix tx fixup skb leak
  net: hamradio: fix memory leak in mkiss_close
  ...
      9ed13a17
  3. 18 Jun, 2021 30 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7