A simple conversion of this freescale ADC binding from txt to yaml.
For maintainer I went with Fugang Duan as the original author of the
binding. Would be great to have confirmation of this.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20200909175946.395313-2-jic23@kernel.org

Scaling factor values for Acc lead to an unacceptable rounding of the
full scale (FS) calculated by some SensorHAL on Android devices. For examples
setting FS to 4g the in_accel_x_scale, in_accel_y_scale and in_accel_z_scale
are 0.001196 on 6 decimal digits and the FS is
0.001196 × ((2^15) − 1) ~= 39.1893 m/s^2.

Android CTS R10 SensorParameterRangeTest test expects a value greater than
39.20 m/s^2 so this test fails (ACCELEROMETER_MAX_RANGE = 4 * 9.80).

Using 9 decimal digits the new scale factor is 0.001196411 and the FS now
is 0.001196411 × ((2^15)−1) ~= 39.2028 m/s^2.

This patch extends to IIO_VAL_INT_PLUS_NANO type the scaling factor to all
IMU devices where SensorParameterRangeTest CTS test fails.
Signed-off-by: Mario Tesi <mario.tesi@st.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/1600361236-2285-1-git-send-email-martepisa@gmail.com

As there are no users anymore of this structure, it can be safely
removed.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200917155223.218500-5-nuno.sa@analog.com

Burst mode variables are now part of the `adis_data` struct. The driver
also has now to explicitly define the length of the burst buffer.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200917155223.218500-4-nuno.sa@analog.com

Burst mode variables are now part of the `adis_data` struct. The driver
also has now to explicitly define the length of the burst buffer.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200917155223.218500-3-nuno.sa@analog.com

Add burst mode variables in the per device specific data structure. As
some drivers support multiple devices with different burst sizes it
makes sense this data to be in `adis_data`. While moving the variables,
there are two main differences:

1. The `en`variable is dropped. If a device supports burst mode, it will
just use it as it will has better performance for almost all real use
cases.
2. Replace `extra_len` by `burst_len`. Users should now explicitly
define the length of the burst buffer as it is typically constant. This
also allows to remove the following line from the library:

```
/* All but the timestamp channel */
burst_length = (indio_dev->num_channels - 1) * sizeof(u16);
```

The library should not assume that a timestamp channel is defined.
Moreover, most parts also include some diagnostic data, crc, etc.. in
the burst buffer that needed to be included in an `extra_len` variable
which is not that nice. On top of this, some devices already start to
have some 32bit size channels ...

This patch is also a move to completely drop the `struct adis_burst`
from the library.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200917155223.218500-2-nuno.sa@analog.com

Given a value of 1 corresponds to IIO_SHARE_BY_TYPE I have replaced
it with that.  Should cause no functional change.

Fixes: fdadbce0 ("iio: add Bosch BMA180 acceleration sensor driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200913121227.764626-1-jic23@kernel.org

So it's obvious that the code is wrong in passing true, but I'm assuming
that will actually evaluate to 1 and hence IIO_SHARED_BY_TYPE.
The documentation however has this attribute as IIO_SHARED_BY_ALL.
My current assumption is the documentation is wrong.
If anyone knows otherwise please shout out!

Fixes: 7247645f ("iio: hmc5843: Move hmc5843 out of staging")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/20200913112546.715624-1-jic23@kernel.org

A partial set of these was added to IIO a long time back.
This fills in some gaps in coverage highlighted by building
with W=1
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200913132115.800131-3-jic23@kernel.org

One comment isn't kernel-doc at all, but starts with /** and another
is simply missing a parameter that was introduced recently.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200913132115.800131-4-jic23@kernel.org

Since there was a recently discovered issue with these locks, it probably
makes sense to cleanup the code a bit, to prevent it from being used as an
example/reference.

This change moves the lock only where it is explicitly needed to protect
resources from potential concurrent accesses.

It also reworks the switch statements to do direct returns vs caching the
return value on a variable.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200706110259.23947-3-alexandru.ardelean@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The next rework may require an unindentation of a code block in
ad5592r_read_raw(), which would make review a bit more difficult.

This change unindents the code block for reading the scale of the
non-temperature channels.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200706110259.23947-2-alexandru.ardelean@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

struct iio_chan_spec_ext_info shared element is of type
enum iio_shared_by, not boolean.   It's like the enum value
will for IIO_SHARED_BY_TYPE == 1 == true, hence no actual
problem has been observed.

  CC [M]  drivers/iio/dac/ad5592r-base.o
  491 |   .shared = true,
      |

Fixes: 56ca9db8 ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200722142515.897378-1-jic23@kernel.org

Fixes the following W=1 kernel build warning(s):

 drivers/iio/chemical/sgp30.c:236: warning: Function parameter or member 'duration_us' not described in 'sgp_read_cmd'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Andreas Brauchli <a.brauchli@elementarea.net>
Cc: Pascal Sachs <pascal.sachs@sensirion.com>
Link: https://lore.kernel.org/r/20200716135928.1456727-6-lee.jones@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Kerneldoc expects attributes/parameters to be in '@*.: ' format.

Fixes the following W=1 kernel build warning(s):

 drivers/iio/gyro/adis16080.c:49: warning: Function parameter or member 'lock' not described in 'adis16080_state'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Barry Song <21cnbao@gmail.com>
Link: https://lore.kernel.org/r/20200716135928.1456727-13-lee.jones@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

File headers are not good candidates for kerneldoc.

Fixes the following W=1 kernel build warning(s):

 drivers/iio/dummy/iio_dummy_evgen.c:30: warning: Cannot understand  * @regs: irq regs we are faking
 on line 30 - I thought it was a doc line
 drivers/iio/dummy/iio_dummy_evgen.c:42: warning: Function parameter or member 'irq_sim_domain' not described in 'iio_dummy_eventgen'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200716135928.1456727-16-lee.jones@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fixes the following W=1 kernel build warning(s):

 drivers/iio/adc/ad7949.c:58: warning: Function parameter or member 'indio_dev' not described in 'ad7949_adc_chip'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Charles-Antoine Couret <charles-antoine.couret@essensium.com>
Link: https://lore.kernel.org/r/20200716135928.1456727-18-lee.jones@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Misspelling, missing description.

Fixes the following W=1 kernel build warning(s):

 drivers/iio/dac/ad5064.c:71: warning: bad line:                         internal vref.
 drivers/iio/dac/ad5064.c:83: warning: Function parameter or member 'channels' not described in 'ad5064_chip_info'
 drivers/iio/dac/ad5064.c:125: warning: Function parameter or member 'lock' not described in 'ad5064_state'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200716135928.1456727-20-lee.jones@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fixes the following W=1 kernel build warning(s):

 drivers/iio/dac/ad7303.c:49: warning: Function parameter or member 'vdd_reg' not described in 'ad7303_state'
 drivers/iio/dac/ad7303.c:49: warning: Function parameter or member 'vref_reg' not described in 'ad7303_state'
 drivers/iio/dac/ad7303.c:49: warning: Function parameter or member 'lock' not described in 'ad7303_state'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200716135928.1456727-31-lee.jones@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock, to protect against any other accesses during the
reading of sample. Reading a sample requires multiple consecutive regmap
operations and a completion callback, so this requires that no other
read occurs until it completes.

This is part of a bigger cleanup.
Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200916092928.78026-1-alexandru.ardelean@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

VL53L0X can be configured to use interrupt pin (GPIO1)
to notify host about readiness of new measurement.

If interrupt pin is not specified, driver still uses polling.
Signed-off-by: Ivan Drobyshevskyi <drobyshevskyi@gmail.com>
Link: https://lore.kernel.org/r/20200916074458.873359-2-drobyshevskyi@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Since IRQ support was added to the driver, update bindings accordingly.
Signed-off-by: Ivan Drobyshevskyi <drobyshevskyi@gmail.com>
Link: https://lore.kernel.org/r/20200916074458.873359-1-drobyshevskyi@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This enables use of the driver with ACPI PRP0001 and also removes
an antipattern that I am trying to clear out of IIO to avoid
it being copied into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200910173242.621168-39-jic23@kernel.org

This prevents use of this driver with ACPI via PRP0001 and is
an example of an anti pattern I'm trying to remove from IIO.
Hence drop from this driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: David Barksdale <dbarksdale@uplogix.com>
Link: https://lore.kernel.org/r/20200910173242.621168-38-jic23@kernel.org

This prevents use of this driver with ACPI via PRP0001 and is
an example of an anti pattern I'm trying to remove from IIO.
Hence drop from this driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ludovic Tancerel <ludovic.tancerel@maplehightech.com>
Link: https://lore.kernel.org/r/20200910173242.621168-37-jic23@kernel.org

This prevents use of this driver with ACPI via PRP0001 and is
an example of an anti pattern I'm trying to remove from IIO.
Hence drop from this driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200910173242.621168-36-jic23@kernel.org

Both would result in only a small size saving.  For simplicity it
is best to remove them.  I also wish to remove both these antipatterns
from IIO.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Link: https://lore.kernel.org/r/20200910173242.621168-35-jic23@kernel.org

This prevents use of this driver with ACPI via PRP0001 and is
an example of an anti pattern I'm trying to remove from IIO.
Hence drop from this driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200910173242.621168-34-jic23@kernel.org

This change allows the driver to be used with ACPI PRP0001 and removes
an antipattern that I want to avoid being copied into new IIO drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200910173242.621168-33-jic23@kernel.org

This makes the existing code easier to read and will make the following
patch a little simpler.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200910173242.621168-32-jic23@kernel.org

This prevents use of this driver with ACPI via PRP0001 and is
an example of an anti pattern I'm trying to remove from IIO.
Hence drop from this driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200910173242.621168-31-jic23@kernel.org

This change allow the driver to be used with ACPI PRP0001 and removes
an antipattern that I want to avoid being copied into new IIO drivers.

The handling of match_data uses a different approach as
device_get_match_data() doesn't distinguish between no match, and
a match but with NULL data.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200910173242.621168-30-jic23@kernel.org

Avoids lots of repetition of &client->dev and will make the next
patch tidier.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200910173242.621168-29-jic23@kernel.org

This change allow the driver to be used with ACPI PRP0001 and removes
an antipattern that I want to avoid being copied into new IIO drivers.

The handling of match_data uses a different approach as
device_get_match_data doesn't distinguish between no match, and
a match but with NULL data.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Andreas Brauchli <andreas.brauchli@sensirion.com>
Link: https://lore.kernel.org/r/20200910173242.621168-28-jic23@kernel.org

This cleans up the code at bit, but is primarily here as a precusor
to the next patch. I've only done this for the two functions
which use the dev pointer repeatedly.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Andreas Brauchli <andreas.brauchli@sensirion.com>
Link: https://lore.kernel.org/r/20200910173242.621168-27-jic23@kernel.org

of_match_ptr() prevents use of this driver with ACPI via PRP0001 and is
an example of an anti pattern I'm trying to remove from IIO.
Hence drop from this driver and use generic fw accessors to check
if there is a fw_node and get the id.

It might be neater to use pointers rather than indexes for
the device_data but that is another issue and should be handled
separately.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200910173242.621168-26-jic23@kernel.org

This prevents use of this driver with ACPI via PRP0001 and is
an example of an anti pattern I'm trying to remove from IIO.
Hence drop from this driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200910173242.621168-25-jic23@kernel.org

This prevents use of this driver with ACPI via PRP0001 and is
an example of an anti pattern I'm trying to remove from IIO.
Hence drop from this driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200910173242.621168-24-jic23@kernel.org

This prevents use of this driver with ACPI via PRP0001 and is
an example of an anti pattern I'm trying to remove from IIO.
Hence drop from this driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Manivannan Sadhasivam <manivannanece23@gmail.com>
Link: https://lore.kernel.org/r/20200910173242.621168-23-jic23@kernel.org

This prevents use of this driver with ACPI via PRP0001 and is
an example of an anti pattern I'm trying to remove from IIO.
Hence drop from this driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ludovic Tancerel <ludovic.tancerel@maplehightech.com>
Link: https://lore.kernel.org/r/20200910173242.621168-22-jic23@kernel.org