- 25 Sep, 2016 4 commits
-
-
Brian Foster authored
The current LSN must be available to the buffer validation function to provide the ability to update the metadata LSN of the buffer. Pass the current_lsn value down to xlog_recover_validate_buf_type() in preparation. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Brian Foster authored
The fix to log recovery to update the metadata LSN in recovered buffers introduces the requirement that a buffer is submitted only once per current LSN. Log recovery currently submits buffers on transaction boundaries. This is not sufficient as the abstraction between log records and transactions allows for various scenarios where multiple transactions can share the same current LSN. If independent transactions share an LSN and both modify the same buffer, log recovery can incorrectly skip updates and leave the filesystem in an inconsisent state. In preparation for proper metadata LSN updates during log recovery, update log recovery to submit buffers for write on LSN change boundaries rather than transaction boundaries. Explicitly track the current LSN in a new struct xlog field to handle the various corner cases of when the current LSN may or may not change. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Dave Chinner authored
Recently we've had a number of reports where log recovery on a v5 filesystem has reported corruptions that looked to be caused by recovery being re-run over the top of an already-recovered metadata. This has uncovered a bug in recovery (fixed elsewhere) but the vector that caused this was largely unknown. A kdump test started tripping over this problem - the system would be crashed, the kdump kernel and environment would boot and dump the kernel core image, and then the system would reboot. After reboot, the root filesystem was triggering log recovery and corruptions were being detected. The metadumps indicated the above log recovery issue. What is happening is that the kdump kernel and environment is mounting the root device read-only to find the binaries needed to do it's work. The result of this is that it is running log recovery. However, because there were unlinked files and EFIs to be processed by recovery, the completion of phase 1 of log recovery could not mark the log clean. And because it's a read-only mount, the unmount process does not write records to the log to mark it clean, either. Hence on the next mount of the filesystem, log recovery was run again across all the metadata that had already been recovered and this is what triggered corruption warnings. To avoid this problem, we need to ensure that a read-only mount always updates the log when it completes the second phase of recovery. We already handle this sort of issue with rw->ro remount transitions, so the solution is as simple as quiescing the filesystem at the appropriate time during the mount process. This results in the log being marked clean so the mount behaviour recorded in the logs on repeated RO mounts will change (i.e. log recovery will no longer be run on every mount until a RW mount is done). This is a user visible change in behaviour, but it is harmless. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Dave Chinner authored
When adding a new remote attribute, we write the attribute to the new extent before the allocation transaction is committed. This means we cannot reuse busy extents as that violates crash consistency semantics. Hence we currently treat remote attribute extent allocation like userdata because it has the same overwrite ordering constraints as userdata. Unfortunately, this also allows the allocator to incorrectly apply extent size hints to the remote attribute extent allocation. This results in interesting failures, such as transaction block reservation overruns and in-memory inode attribute fork corruption. To fix this, we need to separate the busy extent reuse configuration from the userdata configuration. This changes the definition of XFS_BMAPI_METADATA slightly - it now means that allocation is metadata and reuse of busy extents is acceptible due to the metadata ordering semantics of the journal. If this flag is not set, it means the allocation is that has unordered data writeback, and hence busy extent reuse is not allowed. It no longer implies the allocation is for user data, just that the data write will not be strictly ordered. This matches the semantics for both user data and remote attribute block allocation. As such, This patch changes the "userdata" field to a "datatype" field, and adds a "no busy reuse" flag to the field. When we detect an unordered data extent allocation, we immediately set the no reuse flag. We then set the "user data" flags based on the inode fork we are allocating the extent to. Hence we only set userdata flags on data fork allocations now and consider attribute fork remote extents to be an unordered metadata extent. The result is that remote attribute extents now have the expected allocation semantics, and the data fork allocation behaviour is completely unchanged. It should be noted that there may be other ways to fix this (e.g. use ordered metadata buffers for the remote attribute extent data write) but they are more invasive and difficult to validate both from a design and implementation POV. Hence this patch takes the simple, obvious route to fixing the problem... Reported-and-tested-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
- 30 Aug, 2016 1 commit
-
-
Darrick J. Wong authored
Christoph reports slab corruption when a deferred refcount update aborts during _defer_finish(). The cause of this was broken log item state tracking in xfs_defer_pending -- upon an abort, _defer_trans_abort() will call abort_intent on all intent items, including the ones that have already had a done item attached. This is incorrect because each intent item has 2 refcount: the first is released when the intent item is committed to the log; and the second is released when the _done_ item is committed to the log, or by the intent creator if there is no done item. In other words, once we log the done item, responsibility for releasing the intent item's second refcount is transferred to the done item and /must not/ be performed by anything else. The dfp_committed flag should have been tracking whether or not we had a done item so that _defer_trans_abort could decide if it needs to abort the intent item, but due to a thinko this was not the case. Rip it out and track the done item directly so that we do the right thing w.r.t. intent item freeing. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reported-by:
Christoph Hellwig <hch@infradead.org> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
- 29 Aug, 2016 1 commit
-
-
Christoph Hellwig authored
Filesystems like XFS that use extents should not set the FIEMAP_EXTENT_MERGED flag in the fiemap extent structures. To allow for both behaviors for the upcoming gfs2 usage split the iomap type field into type and flags, and only set FIEMAP_EXTENT_MERGED if the IOMAP_F_MERGED flag is set. The flags field will also come in handy for future features such as shared extents on reflink-enabled file systems. Reported-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
- 26 Aug, 2016 7 commits
-
-
Brian Foster authored
xfs_wait_buftarg() waits for all pending I/O, drains the ioend completion workqueue and walks the LRU until all buffers in the cache have been released. This is traditionally an unmount operation` but the mechanism is also reused during filesystem freeze. xfs_wait_buftarg() invokes drain_workqueue() as part of the quiesce, which is intended more for a shutdown sequence in that it indicates to the queue that new operations are not expected once the drain has begun. New work jobs after this point result in a WARN_ON_ONCE() and are otherwise dropped. With filesystem freeze, however, read operations are allowed and can proceed during or after the workqueue drain. If such a read occurs during the drain sequence, the workqueue infrastructure complains about the queued ioend completion work item and drops it on the floor. As a result, the buffer remains on the LRU and the freeze never completes. Despite the fact that the overall buffer cache cleanup is not necessary during freeze, fix up this operation such that it is safe to invoke during non-unmount quiesce operations. Replace the drain_workqueue() call with flush_workqueue(), which runs a similar serialization on pending workqueue jobs without causing new jobs to be dropped. This is safe for unmount as unmount independently locks out new operations by the time xfs_wait_buftarg() is invoked. cc: <stable@vger.kernel.org> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Dave Chinner authored
From inspection, the superblock sb_inprogress check is done in the verifier and triggered only for the primary superblock via a "bp->b_bn == XFS_SB_DADDR" check. Unfortunately, the primary superblock is an uncached buffer, and hence it is configured by xfs_buf_read_uncached() with: bp->b_bn = XFS_BUF_DADDR_NULL; /* always null for uncached buffers */ And so this check never triggers. Fix it. cc: <stable@vger.kernel.org> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Darrick J. Wong authored
If the initial LOOKUP_LE in the simple query range fails to find anything, we should attempt to increment the btree cursor to see if there actually /are/ records for what we're trying to find. Without this patch, a bnobt range query of (0, $agsize) returns no results because the leftmost record never has a startblock of zero. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Darrick J. Wong authored
We only need the record's high key for the first record that we look at; for all records, we /definitely/ need the regular record key. Therefore, fix how the simple range query function gets its keys. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Darrick J. Wong authored
When we're logging the last non-spare field in the AGF, we don't need to log the spare fields, so plumb in a new AGF logging flag to help us avoid that. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Darrick J. Wong authored
Since the kernel doesn't currently support the realtime rmapbt, don't allow such filesystems to be mounted. Support will appear in a future release. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Darrick J. Wong authored
If the caller passes in a cursor to a zero-height btree (which is impossible), we never set block to anything but NULL, which causes the later dereference of it to crash. Instead, just return -EFSCORRUPTED. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
- 17 Aug, 2016 2 commits
-
-
Dave Chinner authored
-
Darrick J. Wong authored
When we're really tight on space, xfs_alloc_ag_vextent_small() can allocate a block from the AGFL and give it to the caller. Since the caller is never the AGFL-fixing method, we must remove the OWN_AG reverse mapping because it will clash with whatever rmap the caller wants to set up. This bug was discovered by running generic/299 repeatedly. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
- 16 Aug, 2016 11 commits
-
-
Christoph Hellwig authored
Use a special read-only iomap_ops implementation to support fiemap on the attr fork. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Christoph Hellwig authored
We'll never get nimap == 0 for a successful return from xfs_bmapi_read, so don't try to handle it. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Christoph Hellwig authored
No need to implement it for read-only mappings. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Dave Chinner authored
By bassing through an -ENOENT, similar to the old XFS implementation of FIEMAP_FLAG_XATTR. Signed-off-by:
Dave Chinner <dchinner@redhat.com> [hch: split from a larger patch] Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Dave Chinner authored
The flag is checked as supported, but then we do an unconditional sync of the file, regardless of whether the flag is set or not. Make the sync conditional on having the FIEMAP_FLAG_SYNC flag set. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Christoph Hellwig authored
iov_iter_copy_from_user_atomic disables page faults internally, no need to do it around the call. This also brings the iomap code in line with the original filemap version. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Christoph Hellwig authored
This catches up with commit 2457ae ("mm: non-atomically mark page accessed during page cache allocation where possible"), which moved the initial access marking into the pagecache allocator. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Darrick J. Wong authored
Track the number of blocks used for the rmapbt in the AGF. When we get to the AG reservation code we need this counter to quickly make our reservation during mount. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Dave Chinner authored
When we do DAX IO, we try to invalidate the entire page cache held on the file. This is incorrect as it will trash the entire mapping tree that now tracks dirty state in exceptional entries in the radix tree slots. What we are trying to do is remove cached pages (e.g from reads into holes) that sit in the radix tree over the range we are about to write to. Hence we should just limit the invalidation to the range we are about to overwrite. Reported-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Christoph Hellwig authored
The space reservations was without an explaination in commit "Add error reporting calls in error paths that return EFSCORRUPTED" back in 2003. There is no reason to reserve disk blocks in the transaction when allocating blocks for delalloc space as we already reserved the space when creating the delalloc extent. With this fix we stop running out of the reserved pool in generic/229, which has happened for long time with small blocksize file systems, and has increased in severity with the new buffered write path. [ dchinner: we still need to pass the block reservation into xfs_bmapi_write() to ensure we don't deadlock during AG selection. See commit dbd5c8c9 ("xfs: pass total block res. as total xfs_bmapi_write() parameter") for more details on why this is necessary. ] Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Brian Foster authored
The buffer I/O accounting mechanism tracks async buffers under I/O. As an optimization, the buffer I/O count is incremented only once on the first async I/O for a given hold cycle of a buffer and decremented once the buffer is released to the LRU (or freed). xfs_buf_ioacct_dec() has an ASSERT() check for an XBF_ASYNC buffer, but we have one or two corner cases where a buffer can be submitted for I/O multiple times via different methods in a single hold cycle. If an async I/O occurs first, the I/O count is incremented. If a sync I/O occurs before the hold count drops, XBF_ASYNC is cleared by the time the I/O count is decremented. Remove the async assert check from xfs_buf_ioacct_dec() as this is a perfectly valid scenario. For the purposes of I/O accounting, we really only care about the buffer async state at I/O submission time. Discovered-and-analyzed-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
- 15 Aug, 2016 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal updates from Zhang Rui: - Fix a race condition when updating cooling device, which may lead to a situation where a thermal governor never updates the cooling device. From Michele Di Giorgio. - Fix a zero division error when disabling the forced idle injection from the intel powerclamp. From Petr Mladek. - Add suspend/resume callback for intel_pch_thermal thermal driver. From Srinivas Pandruvada. - Another two fixes for clocking cooling driver and hwmon sysfs I/F. From Michele Di Giorgio and Kuninori Morimoto. [ Hmm. That suspend/resume callback for intel_pch_thermal doesn't look like a fix, but I'm letting it slide.. - Linus ] * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: clock_cooling: Fix missing mutex_init() thermal: hwmon: EXPORT_SYMBOL_GPL for thermal hwmon sysfs thermal: fix race condition when updating cooling device thermal/powerclamp: Prevent division by zero when counting interval thermal: intel_pch_thermal: Add suspend/resume callback
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull m68knommu fix from Greg Ungerer: "This contains only a single fix for a register corruption problem on certain types of m68k flat format binaries" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix user a5 register being overwritten
-
- 14 Aug, 2016 2 commits
-
-
Linus Torvalds authored
Merge tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull h8300 and unicore32 architecture fixes from Guenter Roeck: "Two patches to fix h8300 and unicore32 builds. unicore32 builds have been broken since v4.6. The fix has been available in -next since March of this year. h8300 builds have been broken since the last commit window. The fix has been available in -next since June of this year" * tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: h8300: Add missing include file to asm/io.h unicore32: mm: Add missing parameter to arch_vma_access_permitted
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - support for nr_cpus= command line argument (maxcpus was previously changed to allow secondary CPUs to be hot-plugged) - ARM PMU interrupt handling fix - fix potential TLB conflict in the hibernate code - improved handling of EL1 instruction aborts (better error reporting) - removal of useless jprobes code for stack saving/restoring - defconfig updates * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: defconfig: enable CONFIG_LOCALVERSION_AUTO arm64: defconfig: add options for virtualization and containers arm64: hibernate: handle allocation failures arm64: hibernate: avoid potential TLB conflict arm64: Handle el1 synchronous instruction aborts cleanly arm64: Remove stack duplicating code from jprobes drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property drivers/perf: arm-pmu: convert arm_pmu_mutex to spinlock arm64: Support hard limit of cpu count by nr_cpus
-
- 13 Aug, 2016 4 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "KVM: - lock kvm_device list to prevent corruption on device creation. PPC: - split debugfs initialization from creation of the xics device to unlock the newly taken kvm lock earlier. s390: - prevent userspace from triggering two WARN_ON_ONCE. MIPS: - fix several issues in the management of TLB faults (Cc: stable)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: MIPS: KVM: Propagate kseg0/mapped tlb fault errors MIPS: KVM: Fix gfn range check in kseg0 tlb faults MIPS: KVM: Add missing gfn range check MIPS: KVM: Fix mapped fault broken commpage handling KVM: Protect device ops->create and list_add with kvm->lock KVM: PPC: Move xics_debugfs_init out of create KVM: s390: reset KVM_REQ_MMU_RELOAD if mapping the prefix failed KVM: s390: set the prefix initially properly
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - an NVMe fix from Gabriel, fixing a suspend/resume issue on some setups - addition of a few missing entries in the block queue sysfs documentation, from Joe - a fix for a sparse shadow warning for the bvec iterator, from Johannes - a writeback deadlock involving raid issuing barriers, and not flushing the plug when we wakeup the flusher threads. From Konstantin - a set of patches for the NVMe target/loop/rdma code, from Roland and Sagi * 'for-linus' of git://git.kernel.dk/linux-block: bvec: avoid variable shadowing warning doc: update block/queue-sysfs.txt entries nvme: Suspend all queues before deletion mm, writeback: flush plugged IO in wakeup_flusher_threads() nvme-rdma: Remove unused includes nvme-rdma: start async event handler after reconnecting to a controller nvmet: Fix controller serial number inconsistency nvmet-rdma: Don't use the inline buffer in order to avoid allocation for small reads nvmet-rdma: Correctly handle RDMA device hot removal nvme-rdma: Make sure to shutdown the controller if we can nvme-loop: Remove duplicate call to nvme_remove_namespaces nvme-rdma: Free the I/O tags when we delete the controller nvme-rdma: Remove duplicate call to nvme_remove_namespaces nvme-rdma: Fix device removal handling nvme-rdma: Queue ns scanning after a sucessful reconnection nvme-rdma: Don't leak uninitialized memory in connect request private data
-
Guenter Roeck authored
h8300 builds fail with arch/h8300/include/asm/io.h:9:15: error: unknown type name ‘u8’ arch/h8300/include/asm/io.h:15:15: error: unknown type name ‘u16’ arch/h8300/include/asm/io.h:21:15: error: unknown type name ‘u32’ and many related errors. Fixes: 23c82d41bdf4 ("kexec-allow-architectures-to-override-boot-mapping-fix") Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
unicore32 fails to compile with the following errors. mm/memory.c: In function ‘__handle_mm_fault’: mm/memory.c:3381: error: too many arguments to function ‘arch_vma_access_permitted’ mm/gup.c: In function ‘check_vma_flags’: mm/gup.c:456: error: too many arguments to function ‘arch_vma_access_permitted’ mm/gup.c: In function ‘vma_permits_fault’: mm/gup.c:640: error: too many arguments to function ‘arch_vma_access_permitted’ Fixes: d61172b4 ("mm/core, x86/mm/pkeys: Differentiate instruction fetches") Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Guan Xuetao <gxt@mprc.pku.edu.cn>
-
- 12 Aug, 2016 5 commits
-
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fix from Alex Williamson: "Fix oops when dereferencing empty data (Alex Williamson)" * tag 'vfio-v4.8-rc2' of git://github.com/awilliam/linux-vfio: vfio/pci: Fix NULL pointer oops in error interrupt setup handling
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fixes from Bruce Fields: "Fixes for the dentry refcounting leak I introduced in 4.8-rc1, and for races in the LOCK code which appear to go back to the big nfsd state lock removal from 3.17" * tag 'nfsd-4.8-1' of git://linux-nfs.org/~bfields/linux: nfsd: don't return an unhashed lock stateid after taking mutex nfsd: Fix race between FREE_STATEID and LOCK nfsd: fix dentry refcounting on create
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "Two hibernation fixes allowing it to work with the recently added randomization of the kernel identity mapping base on x86-64 and one cpufreq driver regression fix. Specifics: - Fix the x86 identity mapping creation helpers to avoid the assumption that the base address of the mapping will always be aligned at the PGD level, as it may be aligned at the PUD level if address space randomization is enabled (Rafael Wysocki). - Fix the hibernation core to avoid executing tracing functions before restoring the processor state completely during resume (Thomas Garnier). - Fix a recently introduced regression in the powernv cpufreq driver that causes it to crash due to an out-of-bounds array access (Akshay Adiga)" * tag 'pm-4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / hibernate: Restore processor state before using per-CPU variables x86/power/64: Always create temporary identity mapping correctly cpufreq: powernv: Fix crash in gpstate_timer_handler()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "This is bigger than usual - the reason is partly a pent-up stream of fixes after the merge window and partly accidental. The fixes are: - five patches to fix a boot failure on Andy Lutomirsky's laptop - four SGI UV platform fixes - KASAN fix - warning fix - documentation update - swap entry definition fix - pkeys fix - irq stats fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/x2apic, smp/hotplug: Don't use before alloc in x2apic_cluster_probe() x86/efi: Allocate a trampoline if needed in efi_free_boot_services() x86/boot: Rework reserve_real_mode() to allow multiple tries x86/boot: Defer setup_real_mode() to early_initcall time x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly x86/boot: Run reserve_bios_regions() after we initialize the memory map x86/irq: Do not substract irq_tlb_count from irq_call_count x86/mm: Fix swap entry comment and macro x86/mm/kaslr: Fix -Wformat-security warning x86/mm/pkeys: Fix compact mode by removing protection keys' XSAVE buffer manipulation x86/build: Reduce the W=1 warnings noise when compiling x86 syscall tables x86/platform/UV: Fix kernel panic running RHEL kdump kernel on UV systems x86/platform/UV: Fix problem with UV4 BIOS providing incorrect PXM values x86/platform/UV: Fix bug with iounmap() of the UV4 EFI System Table causing a crash x86/platform/UV: Fix problem with UV4 Socket IDs not being contiguous x86/entry: Clarify the RF saving/restoring situation with SYSCALL/SYSRET x86/mm: Disable preemption during CR3 read+write x86/mm/KASLR: Increase BRK pages for KASLR memory randomization x86/mm/KASLR: Fix physical memory calculation on KASLR memory randomization x86, kasan, ftrace: Put APIC interrupt handlers into .irqentry.text
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "Misc fixes: a /dev/rtc regression fix, two APIC timer period calibration fixes, an ARM clocksource driver fix and a NOHZ power use regression fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hpet: Fix /dev/rtc breakage caused by RTC cleanup x86/timers/apic: Inform TSC deadline clockevent device about recalibration x86/timers/apic: Fix imprecise timer interrupts by eliminating TSC clockevents frequency roundoff error timers: Fix get_next_timer_interrupt() computation clocksource/arm_arch_timer: Force per-CPU interrupt to be level-triggered
-