- 13 Mar, 2023 9 commits
-
-
Shirish S authored
[Why] Currently there aren't any methods to determine PSR state residency. [How] create a sysfs entry for reading residency and internally hook it up to existing functionality of reading PSR residency from firmware. [Hamza: dropped the link.h include and made checkpatch happy] Signed-off-by:
Shirish S <shirish.s@amd.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Jane Jian authored
for sriov, we added a new flag to indicate av1 support, this will override the original caps info. Signed-off-by:
Jane Jian <Jane.Jian@amd.com> Acked-by:
-
Xiaogang Chen authored
During miration to vram prange->offset is valid after vram buffer is located, either use old one or allocate a new one. Move svm_range_vram_node_new before migrate for each vma to get valid prange->offset. v2: squash in warning fix Fixes: 9473b6b2 ("drm/amdkfd: Fix BO offset for multi-VMA page migration") Signed-off-by:
Xiaogang Chen <Xiaogang.Chen@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Tom St Denis authored
Checked against database, copied from GC 9.4.2 header. Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Acked-by:
-
Lijo Lazar authored
Temperature limits are not available for SMU v13.0.6. Also, edge temperature is not tracked. Remove logic associated with those. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Jiapeng Chong authored
Swap is a function interface that provides exchange function. To avoid code duplication, we can use swap function. ./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:359:57-58: WARNING opportunity for swap(). Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4448Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Błażej Szczygieł authored
Always setup overdrive tables after resume. Preserve only some user-defined settings in user_overdrive_table if they're set. Copy restored user_overdrive_table into od_table to get correct values. On cold boot, BTC was triggered and GfxVfCurve was calibrated. We got VfCurve settings (a). On resuming back, BTC will be triggered again and GfxVfCurve will be recalibrated. VfCurve settings (b) got may be different from those of cold boot. So if we reuse those VfCurve settings (a) got on cold boot on suspend, we can run into discrepencies. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1897 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2276Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Błażej Szczygieł <mumei6102@gmail.com> Signed-off-by:
-
Tim Huang authored
Align the SMU driver interface version with PMFW to suppress the version mismatch message on driver loading. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
-
Chia-I Wu authored
Set *q to NULL on errors, otherwise pqm_create_queue would free it again. Signed-off-by:
Chia-I Wu <olvaffe@gmail.com> Signed-off-by:
-
- 08 Mar, 2023 11 commits
-
-
Tom Rix authored
With gcc and W=1, there is this error drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:297:13: error: variable ‘available’ set but not used [-Werror=unused-but-set-variable] 297 | int available = 0; | ^~~~~~~~~ Since available is unused, remove it. Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Tom Rix authored
With gcc and W=1, there is this error drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_mst_types.c:1214:31: error: variable ‘res_pool’ set but not used [-Werror=unused-but-set-variable] 1214 | struct resource_pool *res_pool; | ^~~~~~~~ Since res_pool is unused, remove it. Signed-off-by: -
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
David Tadokoro authored
Some amdgpu_dm_crtc.h functions didn't have names that indicated where they were declared. To better filter results in debug tools like ftrace, prefix these functions with 'amdgpu_dm_crtc_'. Signed-off-by:
David Tadokoro <davidbtadokoro@usp.br> Signed-off-by:
-
Alex Deucher authored
This reverts commit d24b77e4. This does not work as expected. Bug: https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/issues/730Signed-off-by:
-
Veerabadhran Gopalakrishnan authored
Added the video capability query support for VCN version 4_0_4 Signed-off-by:
Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
David Tadokoro authored
The fields blends_with_above and blends_with_below of struct dc_plane_cap (defined in dc/dc.h) are boolean and set to true by default. All instances of a dc_plane_cap maintain the default values of both. Also, there is only one if statement that checks those fields and there would be the same effect if it was deleted (assuming that those fields are always going to be true). For this reason, considering both fields as legacy ones, this commit removes them and the aforementioned if statement. Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Alex Deucher authored
This reverts commit fa458eb1. The issue is no longer present even with this commit present as verified by the original reporter. Reviewed-by:
-
Peter Foley authored
The amdgpu driver tries to use fields not supported by UML's cpuinfo struct. Disable the driver when targeting UML to avoid tripping up allyesconfig. e.g. ../drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_hwmgr.c: In function ‘intel_core_rkl_chk’: ../drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_hwmgr.c:1742:33: error: initialization of ‘struct cpuinfo_x86 *’ from incompatible pointer type ‘struct cpuinfo_um *’ [-Werror=incompatible-pointer-types ] ../drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c: In function ‘kfd_cpumask_to_apic_id’: ../drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:2157:48: error: ‘struct cpuinfo_um’ has no member named ‘apicid’ Acked-by:
Peter Foley <pefoley2@pefoley.com> Signed-off-by:
-
Husain Alshehhi authored
Replace "isntance" with "instance". Signed-off-by:
Husain Alshehhi <husain@alshehhi.io> Signed-off-by:
-
David Tadokoro authored
The amdgpu_dm_plane.h functions didn't have names that indicated where they were declared. To better filter results in debug tools like ftrace, prefix these functions with 'amdgpu_dm_plane_'. Note that we may want to make this same change in other files like amdgpu_dm_crtc.h. Signed-off-by:
-
- 07 Mar, 2023 20 commits
-
-
Alex Deucher authored
Properly skip non-existent registers as well. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442Reviewed-by:
-
Alex Deucher authored
Properly skip non-existent registers as well. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442Reviewed-by:
-
Alex Deucher authored
Properly skip non-existent registers as well. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442Reviewed-by:
-
Tom Rix authored
smatch reports these similar problems in dcn30 drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dwb.c:223:25: warning: symbol 'dcn30_dwbc_funcs' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_mmhubbub.c:214:28: warning: symbol 'dcn30_mmhubbub_funcs' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_mpc.c:1402:24: warning: symbol 'dcn30_mpc_funcs' was not declared. Should it be static? All of these are only used in their definition file, so they should be static Signed-off-by:
-
Tom Rix authored
smatch reports these similar problems in dcn20 drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dsc.c:53:24: warning: symbol 'dcn20_dsc_funcs' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dwb.c:304:25: warning: symbol 'dcn20_dwbc_funcs' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_mmhubbub.c:300:28: warning: symbol 'dcn20_mmhubbub_funcs' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_mpc.c:545:24: warning: symbol 'dcn20_mpc_funcs' was not declared. Should it be static? All of these are only used in their definition file, so they should be static Signed-off-by:
-
Tom Rix authored
smatch reports these similar problems in dcn201 drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn201/dcn201_clk_mgr.c:165:22: warning: symbol 'dcn201_funcs' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dcn201/dcn201_resource.c:77:30: warning: symbol 'dcn201_ip' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dcn201/dcn201_resource.c:139:37: warning: symbol 'dcn201_soc' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dcn201/dcn201_mpc.c:79:24: warning: symbol 'dcn201_mpc_funcs' was not declared. Should it be static? All of these are only used in their definition file, so they should be static Signed-off-by:
-
Lijo Lazar authored
Add initial SMU 13.0.6 implementation. v1: Initial implementation to support SMU 13.0.6. v2: Add driver interface version check. v3: rebase (Alex) v4: Enable i2c for avoid warning (Alex) v5: sqaush in cleanups up through (Alex) "drm/amd/pm: Ignore EIO error on SMUv13.0.6" Signed-off-by: -
lyndonli authored
Actually, the drm_dev_enter in psp_cmd_submit_buf does not protect anything. If DRM device is unplugged, it will always check the condition in WARN_ON. So drop drm_dev_enter and drm_dev_exit in psp_cmd_submit_buf. When removing amdgpu, the calling order is as follows: amdgpu_pci_remove drm_dev_unplug amdgpu_driver_unload_kms amdgpu_device_fini_hw amdgpu_device_ip_fini_early psp_hw_fini psp_ras_terminate psp_ta_unloadye psp_cmd_submit_buf [ 4507.740388] Call Trace: [ 4507.740389] <TASK> [ 4507.740391] psp_ta_unload+0x44/0x70 [amdgpu] [ 4507.740485] psp_ras_terminate+0x4d/0x70 [amdgpu] [ 4507.740575] psp_hw_fini+0x28/0xa0 [amdgpu] [ 4507.740662] amdgpu_device_fini_hw+0x328/0x442 [amdgpu] [ 4507.740791] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu] [ 4507.740875] amdgpu_pci_remove+0x5a/0x140 [amdgpu] [ 4507.740962] ? _raw_spin_unlock_irqrestore+0x27/0x43 [ 4507.740965] ? __pm_runtime_resume+0x60/0x90 [ 4507.740968] pci_device_remove+0x39/0xb0 [ 4507.740971] device_remove+0x46/0x70 [ 4507.740972] device_release_driver_internal+0xd1/0x160 [ 4507.740974] driver_detach+0x4a/0x90 [ 4507.740975] bus_remove_driver+0x6c/0xf0 [ 4507.740976] driver_unregister+0x31/0x50 [ 4507.740977] pci_unregister_driver+0x40/0x90 [ 4507.740978] amdgpu_exit+0x15/0x120 [amdgpu] v2: fix commit message style issue Signed-off-by:lyndonli <Lyndon.Li@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Felix Kuehling authored
Treat the last page in a non-contiguous range as part of the following contiguous range. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-and-tested-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Reviewed-by:
-
Lijo Lazar authored
Initial version of PMFW interface and message headers for SMU 13.0.6 support. v2: squash in location fixes (Alex) v3: squash in updates (Alex) Signed-off-by:
-
Hawking Zhang authored
Add mp v13_0_6 register offset and shift masks header files v2: update headers (Alex) Signed-off-by:
Le Ma <Le.Ma@amd.com> Signed-off-by:
-
Orlando Chamberlain authored
Commit 3840c5bc ("drm/amdgpu: disentangle runtime pm and vga_switcheroo") made amdgpu only register a vga_switcheroo client for GPU's with PX, however AMD GPUs in dual gpu Apple Macbooks do need to register, but don't have PX. Instead of AMD's PX, they use apple-gmux. Use apple_gmux_detect() to identify these gpus, and pci_is_thunderbolt_attached() to ensure eGPUs connected to Dual GPU Macbooks don't register with vga_switcheroo. Fixes: 3840c5bc ("drm/amdgpu: disentangle runtime pm and vga_switcheroo") Link: https://lore.kernel.org/amd-gfx/20230210044826.9834-10-orlandoch.dev@gmail.com/Signed-off-by:
Orlando Chamberlain <orlandoch.dev@gmail.com> Signed-off-by:
-
Aric Cyr authored
In this new version there are two major changes: 1) Transitioning to the new DC commit sequence There is an extended effort to migrate to the new DC commit sequence that better adheres to the DCN hardware constraints. Most of the code was upstreamed already but not connected to amdgpu_dm, and in this new DC version, our DM finally started to use it for all ASICs. This should improve stability and enable us to improve how pipe split works. 2) Drop old CONFIG_DRM_AMD_DC_DCN in favor of new CONFIG_DRM_AMD_DC_FP For historical reasons, we created CONFIG_DRM_AMD_DC_DCN to isolate FPU-related code to only be used for DCN. Over the years, we lost control over this guard, and it was spread in multiple areas. In this new DC version, there is an effort to remove all unnecessary CONFIG_DRM_AMD_DC_DCN and replace the others for CONFIG_DRM_AMD_DC_FP, which better describes which type of code this guard is intended for. Finally, this version brings along the following: - Enable HostVM based on rIOMMU active - Keep PHY active for dp confi - Improves Z8 - Update clock table - Code and directives clean up Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
The function dc_update_planes_and_stream handles multiple cases where DC needs to remove and add planes in the commit tail phase. After Linux started to use this function, some of the IGT kms_plane started to fail; one good example to illustrate why the new sequence regressed IGT is the subtest plane-position-hole which has the following diagram as a template: +--------------------+ +-----------------------+ | +-----+ | | +-----+ | | | | | | | +-----+ | | | +--+ | ==> | | | | | | | |__| | | +-|---+ | | | | | +-----+ | | | | | +--------------------+ +-----------------------+ (a) Final image (b) Composed image IGT expects image (a) as the final result of two plane compositions as described in figure (b). After the migration to the new sequence, the last plane order is changed, and DC generates the following image: +---------------------+ | +-----+ | | | | | | | | | | +-----+ | | | +---------------------+ Notice that the generated image by DC is different because the small square that should be composed on top of the primary plane is below the primary plane. For this reason, the CRC will mismatch with the expected value. Since the function dc_add_all_planes_for_stream re-append all the new planes back to the dc_validation_set, this commit ensures that the original sequence is maintained. After this change, all CI tests in all ASICs start to pass again. Reviewed-by:
Harry Wentland <Harry.Wentland@amd.com> Acked-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Rodrigo Siqueira authored
[Why & How] This commit is part of a sequence of changes that replaces the commit sequence used in the DC with a new one. As a result of this transition, we moved some specific parts from the commit sequence and brought them to amdgpu_dm. This commit adds a wrapper inside DM that enable our drivers to do any necessary preparation or change before we offload the plane/stream update to DC. Reviewed-by:
-
Rodrigo Siqueira authored
[Why & How] DC now uses a new commit sequence which is more robust since it addresses cases where we need to reorganize pipes based on planes and other parameters. As a result, this new commit sequence reset the DC state by cleaning plane states and re-creating them accordingly with the need. For this reason, the dce_transform_set_pixel_storage_depth can be invoked after a plane state is destroyed and before its re-creation. In this situation and on DCE devices, DC will hit a condition that will trigger a dmesg log that looks like this: Console: switching to colour frame buffer device 240x67 ------------[ cut here ]------------ [..] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 5603 07/28/2020 RIP: 0010:dce_transform_set_pixel_storage_depth+0x3f8/0x480 [amdgpu] [..] RSP: 0018:ffffc9000202b850 EFLAGS: 00010293 RAX: ffffffffa081d100 RBX: ffff888110790000 RCX: 000000000000000c RDX: ffff888100bedbf8 RSI: 0000000000001a50 RDI: ffff88810463c900 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007 R10: 0000000000000001 R11: 0000000000000f00 R12: ffff88810f500010 R13: ffff888100bedbf8 R14: ffff88810f515688 R15: 0000000000000000 FS: 00007ff0159249c0(0000) GS:ffff88840e940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff01528e550 CR3: 0000000002a10000 CR4: 00000000003506e0 Call Trace: <TASK> ? dm_write_reg_func+0x21/0x80 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] dc_stream_set_dither_option+0xfb/0x130 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] amdgpu_dm_crtc_configure_crc_source+0x10b/0x190 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] amdgpu_dm_atomic_commit_tail+0x20a8/0x2a90 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] ? free_unref_page_commit+0x98/0x170 ? free_unref_page+0xcc/0x150 commit_tail+0x94/0x120 drm_atomic_helper_commit+0x10f/0x140 drm_atomic_commit+0x94/0xc0 ? drm_plane_get_damage_clips.cold+0x1c/0x1c drm_client_modeset_commit_atomic+0x203/0x250 drm_client_modeset_commit_locked+0x56/0x150 drm_client_modeset_commit+0x21/0x40 drm_fb_helper_lastclose+0x42/0x70 amdgpu_driver_lastclose_kms+0xa/0x10 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] drm_release+0xda/0x110 __fput+0x89/0x240 task_work_run+0x5c/0x90 do_exit+0x333/0xae0 do_group_exit+0x2d/0x90 __x64_sys_exit_group+0x14/0x20 do_syscall_64+0x5b/0x80 ? exit_to_user_mode_prepare+0x1e/0x140 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7ff016ceaca1 Code: Unable to access opcode bytes at RIP 0x7ff016ceac77. RSP: 002b:00007ffe7a2357e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007ff016e15a00 RCX: 00007ff016ceaca1 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffffffffff78 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff016e15a00 R13: 0000000000000000 R14: 00007ff016e1aee8 R15: 00007ff016e1af00 </TASK> Since this issue only happens in a transition state on DC, this commit replace BREAK_TO_DEBUGGER with DC_LOG_DC. Reviewed-by:
-
Rodrigo Siqueira authored
[Why & How] The old dc_commit_updates_for_stream lacks manipulation for many corner cases where the DC feature requires special attention; as a result, it starts to show its limitation (e.g., the SubVP feature is not supported by it, among other cases). To modernize and unify our internal API, this commit replaces the old dc_commit_updates_for_stream with dc_update_planes_and_stream, which has more features. Reviewed-by:
-
Rodrigo Siqueira authored
[Why & How] There are two functions responsible for handling the DC commit state: dc_commit_state and dc_commit_streams. Both have the same goal, but dc_commit_streams surpess dc_commit_state in terms of completeness. For this reason, maintaining these two functions makes maintainability unnecessarily complicated. This commit replaces the old dc_commit_state in favor of dc_commit_streams, and removes the old dc_commit_state. Reviewed-by:
-
Rodrigo Siqueira authored
[Why & How] In the commit 32953485 ("drm/amd/display: Do not update DRR while BW optimizations pending"), a modification was added to avoid adjusting DRR if optimized bandwidth is set. This change was only intended for DCN, but one part of the patch changed the code path for DCE devices and caused regressions to the kms_vrr test. To address this problem, this commit adds a modification in which dc_stream_adjust_vmin_vmax will be fully executed in DCE devices. Fixes: 32953485 ("drm/amd/display: Do not update DRR while BW optimizations pending") Reviewed-by:
-
Alvin Lee authored
[Description] - For pipe harvesting cases, the pipe index does not necessarily match up with the OTG instance, so pass index by OTG Instance instead - For pipe split cases pass HUBP instance, since the split index is only used for HUBP programming - Also check for OPP ID when accessing opp for pipe harvesting cases Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Alvin Lee <Alvin.Lee2@amd.com> Tested-by:
-
