- 15 Jan, 2016 40 commits
-
-
Trond Myklebust authored
commit 756b9b37 upstream. The NFSv4.1 callback channel is currently broken because the receive message will keep shrinking because the backchannel receive buffer size never gets reset. The easiest solution to this problem is instead of changing the receive buffer, to rather adjust the copied request. Fixes: 38b7631f ("nfs4: limit callback decoding to received bytes") Cc: Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Grygorii Strashko authored
commit 000255b7 upstream. Originally OMAP MPUIO GPIO irqchip was implemented using Generic irq chip, but after set of reworks Generic irq chip code was replaced by common OMAP GPIO implementation and finally removed by commit d2d05c65 ("gpio: omap: Fix regression for MPUIO interrupts"). Unfortunately, above commit left .irq_mask/unmask callbacks assigned as below for MPUIO GPIO case: irqc->irq_mask = irq_gc_mask_set_bit; irqc->irq_unmask = irq_gc_mask_clr_bit; This now causes boot failure on OMAP1 platforms, after commit 450fa54c ("gpio: omap: convert to use generic irq handler") which forces these callbacks to be called during GPIO IRQs mapping from gpiochip_irq_map: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 75 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0-rc1-e3-los_afe0c+-00002-g25379c0-dirty #1 Hardware name: Amstrad E3 (Delta) task: c1836000 ti: c1838000 task.ti: c1838000 PC is at irq_gc_mask_set_bit+0x1c/0x60 LR is at __irq_do_set_handler+0x118/0x15c pc : [<c004848c>] lr : [<c0047d4c>] psr: 600000d3 sp : c1839c90 ip : c1862c64 fp : c1839c9c r10: 00000000 r9 : c0411950 r8 : c0411bbc r7 : 00000000 r6 : c185c310 r5 : c00444e8 r4 : c185c300 r3 : c1854b50 r2 : 00000000 r1 : 00000000 r0 : c185c310 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 0000317f Table: 10004000 DAC: 00000057 Process swapper (pid: 1, stack limit = 0xc1838190) Stack: (0xc1839c90 to 0xc183a000) [...] Backtrace: [<c0048470>] (irq_gc_mask_set_bit) from [<c0047d4c>] (__irq_do_set_handler+0x118/0x15c) [<c0047c34>] (__irq_do_set_handler) from [<c0047dd4>] (__irq_set_handler+0x44/0x5c) r6:00000000 r5:c00444e8 r4:c185c300 [<c0047d90>] (__irq_set_handler) from [<c0047e1c>] (irq_set_chip_and_handler_name+0x30/0x34) r7:00000050 r6:00000000 r5:c00444e8 r4:00000050 [<c0047dec>] (irq_set_chip_and_handler_name) from [<c01b345c>] (gpiochip_irq_map+0x3c/0x8c) r7:00000050 r6:00000000 r5:00000050 r4:c1862c64 [<c01b3420>] (gpiochip_irq_map) from [<c0049670>] (irq_domain_associate+0x7c/0x1c4) r5:c185c310 r4:c185cb00 [<c00495f4>] (irq_domain_associate) from [<c0049894>] (irq_domain_add_simple+0x98/0xc0) r8:c0411bbc r7:c185cb00 r6:00000050 r5:00000010 r4:00000001 [<c00497fc>] (irq_domain_add_simple) from [<c01b3328>] (_gpiochip_irqchip_add+0x64/0x10c) r7:c1862c64 r6:c0419280 r5:c1862c64 r4:c1854b50 [<c01b32c4>] (_gpiochip_irqchip_add) from [<c01b79f4>] (omap_gpio_probe+0x2fc/0x63c) r5:c1854b50 r4:c1862c10 [<c01b76f8>] (omap_gpio_probe) from [<c01fcf58>] (platform_drv_probe+0x2c/0x64) r10:00000000 r9:c03e45e8 r8:00000000 r7:c0419294 r6:c0411984 r5:c0419294 r4:c0411950 [<c01fcf2c>] (platform_drv_probe) from [<c01fb668>] (really_probe+0x160/0x29c) Hence, fix it by remove obsolete callbacks assignment. After this change omap_gpio_mask_irq()/omap_gpio_unmask_irq() will be used for MPUIO IRQs masking, but this now happens anyway from omap_gpio_irq_startup/shutdown(). Cc: Tony Lindgren <tony@atomide.com> Fixes: commit d2d05c65 ("gpio: omap: Fix regression for MPUIO interrupts") Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Acked-by:
Santosh Shilimkar <ssantosh@kernel.org> Tested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sasha Levin authored
commit 119d6f6a upstream. Because wakeups can (fundamentally) be late, a task might not be in the expected state. Therefore testing against a task's state is racy, and can yield false positives. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: oleg@redhat.com Fixes: 9067ac85 ("wake_up_process() should be never used to wakeup a TASK_STOPPED/TRACED task") Link: http://lkml.kernel.org/r/1448933660-23082-1-git-send-email-sasha.levin@oracle.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Christoph Biedl authored
commit 19cebbcb upstream. Commit 35a4a573 ("isdn: clean up debug format string usage") introduced a safeguard to avoid accidential format string interpolation of data when calling debugl1 or HiSax_putstatus. This did however not take into account VHiSax_putstatus (called by HiSax_putstatus) does *not* call vsprintf if the head parameter is NULL - the format string is treated as plain text then instead. As a result, the string "%s" is processed literally, and the actual information is lost. This affects the isdnlog userspace program which stopped logging information since that commit. So revert the HiSax_putstatus invocations to the previous state. Fixes: 35a4a573 ("isdn: clean up debug format string usage") Cc: Kees Cook <keescook@chromium.org> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by:
Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Andrew Lunn authored
commit 4eba7bb1 upstream. When a multicast group is joined on a socket, a struct ip_mc_socklist is appended to the sockets mc_list containing information about the joined group. If the interface is hot unplugged, this entry becomes stale. Prior to commit 52ad353a ("igmp: fix the problem when mc leave group") it was possible to remove the stale entry by performing a IP_DROP_MEMBERSHIP, passing either the old ifindex or ip address on the interface. However, this fix enforces that the interface must still exist. Thus with time, the number of stale entries grows, until sysctl_igmp_max_memberships is reached and then it is not possible to join and more groups. The previous patch fixes an issue where a IP_DROP_MEMBERSHIP is performed without specifying the interface, either by ifindex or ip address. However here we do supply one of these. So loosen the restriction on device existence to only apply when the interface has not been specified. This then restores the ability to clean up the stale entries. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Fixes: 52ad353a "(igmp: fix the problem when mc leave group") Signed-off-by:
-
Hanjun Guo authored
commit 64031e3e upstream. In commit 60ba032e ("ACPI / property: Drop size_prop from acpi_dev_get_property_reference()"), the argument "const char *cells_name" was dropped, but forgot to update the stub function in no-ACPI case, it will lead to compile error when CONFIG_ACPI=n, easliy remove "const char *cells_name" to fix it. Fixes: 60ba032e "ACPI / property: Drop size_prop from acpi_dev_get_property_reference()" Reported-by:
Kejian Yan <yankejian@huawei.com> Signed-off-by:
Hanjun Guo <hanjun.guo@linaro.org> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Peter Zijlstra authored
commit 68985633 upstream. Vladimir reported getting RCU stall warnings and bisected it back to commit: 74316201 ("sched: Remove proliferation of wait_on_bit() action functions") That commit inadvertently reversed the calls to schedule() and signal_pending(), thereby not handling the case where the signal receives while we sleep. Reported-by:
Vladimir Murzin <vladimir.murzin@arm.com> Tested-by:
-
Russell King authored
commit 69d21fc0 upstream. ipu_crtc_handle_pageflip() was calling drm_send_vblank_event() with a pipe argument of -1. Commit cc1ef118 ("drm/irq: Make pipe unsigned and name consistent") now makes this error obvious, as we now may get a warning from: if (WARN_ON(pipe >= dev->num_crtcs)) in drm_vblank_count_and_time(). Prior to this change, we would end up making out-of-bounds array accesses via: struct drm_vblank_crtc *vblank = &dev->vblank[crtc]; and *vblanktime = vblanktimestamp(dev, pipe, cur_vblank); So, this has been broken for a very long time, and is not a result of the above commit. Since we don't care about the staging versions, I've tagged this with the earliest mainline commit where we do care, even though this commit did not introduce the bug. Fixes: 6556f7f8 ("drm: imx: Move imx-drm driver out of staging") Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Arnd Bergmann authored
commit 89b41108 upstream. The push_irq_work_func() function is conditionally defined only when both CONFIG_SMP and HAVE_RT_PUSH_IPI are defined, but the forward declaration remains visibile without HAVE_RT_PUSH_IPI, causing a gcc warning in ARM64 allnoconfig: kernel/sched/rt.c:68:13: warning: 'push_irq_work_func' declared 'static' but never defined [-Wunused-function] This changes the code to use the same condition for both the declaration and the function definition, which gets rid of the warning. As Peter Zijlstra, we can possibly get rid of the whole HAVE_RT_PUSH_IPI thing after: 8053871d ("smp: Fix smp_call_function_single_async() locking") Until that is done, this patch can be used to avoid the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b6366f04 ("sched/rt: Use IPI to trigger RT task push migration instead of pulling") Link: http://lkml.kernel.org/r/3828565.oKfGk7yNIT@wuerfelSigned-off-by:
-
Arnd Bergmann authored
commit 92792e48 upstream. Recent gcc versions warn about reading from a negative offset of an on-stack array: drivers/remoteproc/remoteproc_debugfs.c: In function 'rproc_recovery_write': drivers/remoteproc/remoteproc_debugfs.c:167:9: warning: 'buf[4294967295u]' may be used uninitialized in this function [-Wmaybe-uninitialized] I don't see anything in sys_write() that prevents us from being called with a zero 'count' argument, so we should add an extra check in rproc_recovery_write() to prevent the access and avoid the warning. Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
-
Heiko Stuebner authored
commit a8594f20 upstream. Commit 371f0f08 ("ARM: 8426/1: dma-mapping: add missing range check in dma_mmap()") introduced offset-checking for mappings, which collides with the fake-offset the drm sets for gems. Other drm-drivers set this offset to 0 before doing the mapping, so this looks like the correct way to go for rockchip as well. Fixes: 371f0f08 ("ARM: 8426/1: dma-mapping: add missing range check in dma_mmap()") Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Johannes Berg authored
commit c1df932c upstream. In the last change here, I neglected to update the cookie in one code path: when a mgmt-tx has no real cookie sent to userspace as it doesn't wait for a response, but is off-channel. The original code used the SKB pointer as the cookie and always assigned the cookie to the TX SKB in ieee80211_start_roc_work(), but my change turned this around and made the code rely on a valid cookie being passed in. Unfortunately, the off-channel no-wait TX path wasn't assigning one at all, resulting in an uninitialized stack value being used. This wasn't handed back to userspace as a cookie (since in the no-wait case there isn't a cookie), but it was tested for non-zero to distinguish between mgmt-tx and off-channel. Fix this by assigning a dummy non-zero cookie unconditionally, and get rid of a misleading comment and some dead code while at it. I'll clean up the ACK SKB handling separately later. Fixes: 3b79af97 ("mac80211: stop using pointers as userspace cookies") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Luca Coelho authored
commit d6ee54a9 upstream. When entering D3, we need to use hardcoded key indices because the firmware requires that. To do so, we are overwriting the HW key index in the keyconf structure, which makes it impossible to reuse the indices that were used before entering D3. Additionally, we overwrite all the non-PTK keys with index 1, because the firmware only allows one non-PTK key to be set. This is bad, because when we resume, we may try to set more than one key with index 1, which will obviously fail. To fix this, allow the callers to set a pre-defined index to use in iwl_mvm_set_sta_key() instead of relying on the hw_key_idx value from the keyconf struct (which requires overwriting it). In normal cases, the caller can pass STA_KEY_IDX_INVALID, which will cause a new key offset to be chosen. During HW_RESTART, we pass the offset that is in use. And during D3 entry, we pass the hardcoded indices we need to use. Additionally, don't clear the fw_key_table in D3 entry, so that the flags are still set with the pre-D3 values when exiting D3. fixes=I3165c22362483f0152d9ec1d2a987fb5529727c1 Fixes: b546dcd6 ("iwlwifi: mvm: don't reset key index on HW restart") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Marcin Wojtas authored
commit db6ba9a5 upstream. This commit adds missing configuration of MBUS windows access protection in mvneta_conf_mbus_windows function - a dedicated variable for that purpose remained there unused since v3.8 initial mvneta support. Because of that the register contents were inherited from the bootloader. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Reviewed-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
-
Marcin Wojtas authored
commit dc1aadf6 upstream. A value originally defined in the driver was inappropriate. Even though the ingress was somehow working, writing MVNETA_RXQ_INTR_ENABLE_ALL_MASK to MVNETA_INTR_ENABLE didn't make any effect, because the bits [31:16] are reserved and read-only. This commit updates MVNETA_RXQ_INTR_ENABLE_ALL_MASK to be compliant with the controller's documentation. Signed-off-by:
-
Marcin Wojtas authored
commit e5bdf689 upstream. MVNETA_RXQ_HW_BUF_ALLOC bit which controls enabling hardware buffer allocation was mistakenly set as BIT(1). This commit fixes the assignment. Signed-off-by:
-
Al Viro authored
commit 2788cc47 upstream. we already zero it on outermost set_nameidata(), so initialization in path_init() is pointless and wrong. The same DoS exists on pre-4.2 kernels, but there a slightly different fix will be needed. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Miklos Szeredi authored
commit acff81ec upstream. [Al Viro] The bug is in being too enthusiastic about optimizing ->setattr() away - instead of "copy verbatim with metadata" + "chmod/chown/utimes" (with the former being always safe and the latter failing in case of insufficient permissions) it tries to combine these two. Note that copyup itself will have to do ->setattr() anyway; _that_ is where the elevated capabilities are right. Having these two ->setattr() (one to set verbatim copy of metadata, another to do what overlayfs ->setattr() had been asked to do in the first place) combined is where it breaks. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Dmitry V. Levin authored
commit 22eab110 upstream. When restarting a syscall with regs->ax == -ERESTART_RESTARTBLOCK, regs->ax is assigned to a restart_syscall number. For x32 tasks, this syscall number must have __X32_SYSCALL_BIT set, otherwise it will be an x86_64 syscall number instead of a valid x32 syscall number. This issue has been there since the introduction of x32. Reported-by: strace/tests/restart_syscall.test Reported-and-tested-by:
Elvira Khabirova <lineprinter0@gmail.com> Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Cc: Elvira Khabirova <lineprinter0@gmail.com> Link: http://lkml.kernel.org/r/20151130215436.GA25996@altlinux.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Dave Hansen authored
commit 8e8efe03 upstream. MPX decodes instructions in order to tell which bounds register was violated. Part of this decoding involves looking at the "REX prefix" which is a special instrucion prefix used to retrofit support for new registers in to old instructions. The X86_REX_*() macros are defined to return actual bit values: #define X86_REX_R(rex) ((rex) & 4) *not* boolean values. However, the MPX code was checking for them like they were booleans. This might have led to us mis-decoding the "REX prefix" and giving false information out to userspace about bounds violations. X86_REX_B() actually is bit 1, so this is really only broken for the X86_REX_X() case. Fix the conditionals up to tolerate the non-boolean values. Fixes: fcc7ffd6 "x86, mpx: Decode MPX instruction to get bound violation information" Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20151201003113.D800C1E0@viggo.jf.intel.comSigned-off-by:
-
Christian König authored
commit 9c97b5ab upstream. The gtt_end is already inclusive, we don't need to subtract one here. v2 (chk): keep the fix for the VM code, cause here it really applies. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Anatoli Antonovitch <anatoli.antonovitch@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ard Biesheuvel authored
commit 0de58f85 upstream. Commit e6fab544 ("ARM/arm64: KVM: test properly for a PTE's uncachedness") modified the logic to test whether a HYP or stage-2 mapping needs flushing, from [incorrectly] interpreting the page table attributes to [incorrectly] checking whether the PFN that backs the mapping is covered by host system RAM. The PFN number is part of the output of the translation, not the input, so we have to use pte_pfn() on the contents of the PTE, not __phys_to_pfn() on the HYP virtual address or stage-2 intermediate physical address. Fixes: e6fab544 ("ARM/arm64: KVM: test properly for a PTE's uncachedness") Tested-by:
Pavel Fedin <p.fedin@samsung.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Xunlei Pang authored
commit 8295c699 upstream. root_domain::rto_mask allocated through alloc_cpumask_var() contains garbage data, this may cause problems. For instance, When doing pull_rt_task(), it may do useless iterations if rto_mask retains some extra garbage bits. Worse still, this violates the isolated domain rule for clustered scheduling using cpuset, because the tasks(with all the cpus allowed) belongs to one root domain can be pulled away into another root domain. The patch cleans the garbage by using zalloc_cpumask_var() instead of alloc_cpumask_var() for root_domain::rto_mask allocation, thereby addressing the issues. Do the same thing for root_domain's other cpumask memembers: dlo_mask, span, and online. Signed-off-by:
Xunlei Pang <xlpang@redhat.com> Signed-off-by:
-
Thomas Hellstrom authored
commit a0af2e53 upstream. A client calling drmSetMaster() using a file descriptor that was opened when another client was master would inherit the latter client's master object and all its authenticated clients. This is unwanted behaviour, and when this happens, instead allocate a brand new master object for the client calling drmSetMaster(). Fixes a BUG() throw in vmw_master_set(). Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Eric Anholt authored
commit 265e2cf6 upstream. It looks like these meant to be unreffing the of_parse_phandle_with_args() node, since the error paths above it don't do of_node_put. That function returns a new ref in pd_args.np, though, not a new ref on dev->of_node. Also, it would have leaked the ref in the success case. Fixes "ERROR: Bad of_node_put()" on bcm2835 in the -EPROBE_DEFER case. Fixes: aa42240a (PM / Domains: Add generic OF-based PM domain look-up) Signed-off-by:
Eric Anholt <eric@anholt.net> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Acked-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Antonio Quartulli authored
commit 4e39ccac upstream. DFS channels should not be actively scanned as we can't be sure if we are allowed or not. If the current channel is in the DFS band, active scan might be performed after CSA, but we have no guarantee about other channels, therefore it is safer to prevent active scanning at all. Signed-off-by:
Antonio Quartulli <antonio@open-mesh.com> Signed-off-by:
-
Peter Hurley authored
commit ee9159dd upstream. The N_X25 line discipline may access the previous line discipline's closed and already-freed private data on open [1]. The tty->disc_data field _never_ refers to valid data on entry to the line discipline's open() method. Rather, the ldisc is expected to initialize that field for its own use for the lifetime of the instance (ie. from open() to close() only). [1] [ 634.336761] ================================================================== [ 634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0 [ 634.339558] Read of size 4 by task syzkaller_execu/8981 [ 634.340359] ============================================================================= [ 634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected ... [ 634.405018] Call Trace: [ 634.405277] dump_stack (lib/dump_stack.c:52) [ 634.405775] print_trailer (mm/slub.c:655) [ 634.406361] object_err (mm/slub.c:662) [ 634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236) [ 634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279) [ 634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1)) [ 634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447) [ 634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567) [ 634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879) [ 634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607) [ 634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613) [ 634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188) Reported-and-tested-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Bart Van Assche authored
commit b49493f9 upstream. Avoid that kmemleak reports the following memory leak if a SCSI LLD calls scsi_host_alloc() and scsi_host_put() but neither scsi_host_add() nor scsi_host_remove(). The following shell command triggers that scenario: for ((i=0; i<2; i++)); do srp_daemon -oac | while read line; do echo $line >/sys/class/infiniband_srp/srp-mlx4_0-1/add_target done done unreferenced object 0xffff88021b24a220 (size 8): comm "srp_daemon", pid 56421, jiffies 4295006762 (age 4240.750s) hex dump (first 8 bytes): 68 6f 73 74 35 38 00 a5 host58.. backtrace: [<ffffffff8151014a>] kmemleak_alloc+0x7a/0xc0 [<ffffffff81165c1e>] __kmalloc_track_caller+0xfe/0x160 [<ffffffff81260d2b>] kvasprintf+0x5b/0x90 [<ffffffff81260e2d>] kvasprintf_const+0x8d/0xb0 [<ffffffff81254b0c>] kobject_set_name_vargs+0x3c/0xa0 [<ffffffff81337e3c>] dev_set_name+0x3c/0x40 [<ffffffff81355757>] scsi_host_alloc+0x327/0x4b0 [<ffffffffa03edc8e>] srp_create_target+0x4e/0x8a0 [ib_srp] [<ffffffff8133778b>] dev_attr_store+0x1b/0x20 [<ffffffff811f27fa>] sysfs_kf_write+0x4a/0x60 [<ffffffff811f1e8e>] kernfs_fop_write+0x14e/0x180 [<ffffffff81176eef>] __vfs_write+0x2f/0xf0 [<ffffffff811771e4>] vfs_write+0xa4/0x100 [<ffffffff81177c64>] SyS_write+0x54/0xc0 [<ffffffff8151b257>] entry_SYSCALL_64_fastpath+0x12/0x6f Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Reviewed-by:
Lee Duncan <lduncan@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Marc-André Lureau authored
commit d6d38d9d upstream. Avoid the sticky preferred mode bit by using the no-merge version of the function (this allows gnome-shell to resize to lower resolutions than the default resolution) Signed-off-by:
Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by:
-
Christian König authored
commit 585116c5 upstream. That got messed up while porting it from Radeon. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Jan Kara authored
commit 74cedf9b upstream. Assume a filesystem with 4KB blocks. When a file has size 1000 bytes and we issue direct IO read at offset 1024, blockdev_direct_IO() reads the tail of the last block and the logic for handling short DIO reads in dio_complete() results in a return value -24 (1000 - 1024) which obviously confuses userspace. Fix the problem by bailing out early once we sample i_size and can reliably check that direct IO read starts beyond i_size. Reported-by:
Avi Kivity <avi@scylladb.com> Fixes: 9fe55eea CC: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Hannes Reinecke authored
commit bf4e6b4e upstream. When a cloned request is retried on other queues it always needs to be checked against the queue limits of that queue. Otherwise the calculations for nr_phys_segments might be wrong, leading to a crash in scsi_init_sgtable(). To clarify this the patch renames blk_rq_check_limits() to blk_cloned_rq_check_limits() and removes the symbol export, as the new function should only be used for cloned requests and never exported. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Ewan Milne <emilne@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Fixes: e2a60da7 ("block: Clean up special command handling logic") Acked-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Takashi Iwai authored
commit 2540058f upstream. Currently a DDI port may register the DP hotplug handler even though it's used with HDMI, and the DP HPD handler overrides the encoder type forcibly to DP. This caused the inconsistency on a machine connected with a HDMI monitor; upon a hotplug event, the DDI port is suddenly switched to be handled as a DP although the same monitor is kept connected, and this leads to the erroneous blank output. This patch papers over the bug by excluding the previous HDMI encoder type from this override. This should be fixed more fundamentally, e.g. by moving the encoder type reset from the HPD or by having individual encoder objects for HDMI and DP. But since the bug has been present for a long time (3.17), it's better to have a quick-n-dirty fix for now, and keep working on a cleaner fix. Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=955190 Fixes: 0e32b39c ('drm/i915: add DP 1.2 MST support (v0.7)') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1447931396-19147-1-git-send-email-tiwai@suse.deSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit b81f472a upstream. Do not update the read stamp after swapping out the reader page from the write buffer. If the reader page is swapped out of the buffer before an event is written to it, then the read_stamp may get an out of date timestamp, as the page timestamp is updated on the first commit to that page. rb_get_reader_page() only returns a page if it has an event on it, otherwise it will return NULL. At that point, check if the page being returned has events and has not been read yet. Then at that point update the read_stamp to match the time stamp of the reader page. Signed-off-by:
-
Chris Wilson authored
commit 0b466dc2 upstream. We have varied reports of swizzling corruption on gen4 desktop, and confirmation that one at least is triggered by uneven memory banks (L-shaped memory). The implication is that the swizzling varies between the paired channels and the remainder of memory on the single channel. As the object then has unpredictable swizzling (it will vary depending on exact page allocation and may even change during the object's lifetime as the pages are replaced), we have to report to userspace that the swizzling is unknown. However, some existing userspace is buggy when it meets an unknown swizzling configuration and so we need to tell another white lie and mark the swizzling as NONE but report it as UNKNOWN through the extended get-tiling-ioctl. See commit 5eb3e5a5 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sun Jun 28 09:19:26 2015 +0100 drm/i915: Declare the swizzling unknown for L-shaped configurations for the previous example where we found that telling the truth to userspace just ends up in a world of hurt. Also since we don't truly know what the swizzling is on the pages, we need to keep them pinned to prevent swapping as the reports also suggest that some gen4 devices have previously undetected bit17 swizzling. v2: Combine unknown + quirk patches to prevent userspace ever seeing unknown swizzling through the normal get-tiling-ioctl. Also use the same path for the existing uneven bank detection for mobile gen4. Reported-by:
Matti Hämäläinen <ccr@tnsp.org> Tested-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Matti Hämäläinen <ccr@tnsp.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Emmanuel Grumbach authored
commit 5ad11b50 upstream. We can't update the Tx power on the device unless it is running. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=101521. Signed-off-by:
-
Arnd Bergmann authored
commit 757b22f9 upstream. Building the advansys driver in a big-endian configuration such as ARM allmodconfig shows a warning: drivers/scsi/advansys.c: In function 'adv_build_req': include/uapi/linux/byteorder/big_endian.h:32:26: warning: large integer implicitly truncated to unsigned type [-Woverflow] #define __cpu_to_le32(x) ((__force __le32)__swab32((x))) drivers/scsi/advansys.c:7806:22: note: in expansion of macro 'cpu_to_le32' scsiqp->sense_len = cpu_to_le32(SCSI_SENSE_BUFFERSIZE); It turns out that the commit that introduced this used the cpu_to_le32() incorrectly on an 8-bit field, which results in the sense_len to always be set to zero, as the SCSI_SENSE_BUFFERSIZE value gets moved to upper byte of the 32-bit intermediate. This removes the cpu_to_le32() call to restore the original version. I found this only by looking at the compiler output and have not done a full review for possible further endianess bugs in the same driver. Signed-off-by:
-
Johannes Berg authored
commit c2e703a5 upstream. When using call_rcu(), the called function may be delayed quite significantly, and without a matching rcu_barrier() there's no way to be sure it has finished. Therefore, global state that could be gone/freed/reused should never be touched in the callback. Fix this in mesh by moving the atomic_dec() into the caller; that's not really a problem since we already unlinked the path and it will be destroyed anyway. This fixes a crash Jouni observed when running certain tests in a certain order, in which the mesh interface was torn down, the memory reused for a function pointer (work struct) and running that then crashed since the pointer had been decremented by 1, resulting in an invalid instruction byte stream. Fixes: eb2b9311 ("mac80211: mesh path table implementation") Reported-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
-
Larry Finger authored
commit eeec5d0e upstream. In commit 54328e64 ("rtlwifi: rtl8821ae: Fix system lockups on boot"), an attempt was made to fix a regression introduced in commit 1277fa2a ("rtlwifi: Remove the clear interrupt routine from all drivers"). Unfortunately, there were logic errors in that patch that prevented affected boxes from booting even after that patch was applied. The actual cause of the original problem is unknown as none of the developers have systems that are affected. Fixes: 54328e64 ("rtlwifi: rtl8821ae: Fix system lockups on boot") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Sachin Pandhare authored
commit e9f96bc5 upstream. From datasheet: R17408 (4400h) HPF_C_1 R17409 (4401h) HPF_C_0 17048 -> 17408 (0x4400) 17049 -> 17409 (0x4401) Signed-off-by:
Sachin Pandhare <sachinpandhare@gmail.com> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
