- 16 Sep, 2013 10 commits
-
-
Marcel Holtmann authored
So far the only option to create a virtual AMP controller was by setting a module parameter for the hci_vhci driver. This patch adds the functionality to define inline to create either a BR/EDR or an AMP controller. In addition the client will be informed which HCI controller index it got assigned. That is especially useful for automated end-to-end testing. To keep backwards compatibility with existing userspace, the command for creating a controller type needs to be send right after opening the device node. If the command is not send, it defaults back to automatically creating a BR/EDR controller. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Marcel Holtmann authored
To allow creating /dev/vhci device node, add the proper module alias for this driver. Signed-off-by:
-
Marcel Holtmann authored
This patch introcuces a new HCI socket channel that allows user applications to take control over a specific HCI device. The application gains exclusive access to this device and forces the kernel to stay away and not manage it. In case of the management interface it will actually hide the device. Such operation is useful for security testing tools that need to operate underneath the Bluetooth stack and need full control over a device. The advantage here is that the kernel still provides the service of hardware abstraction and HCI level access. The use of Bluetooth drivers for hardware access also means that sniffing tools like btmon or hcidump are still working and the whole set of transaction can be traced with existing tools. With the new channel it is possible to send HCI commands, ACL and SCO data packets and receive HCI events, ACL and SCO packets from the device. The format follows the well established H:4 protocol. The new HCI user channel can only be established when a device has been through its setup routine and is currently powered down. This is enforced to not cause any problems with current operations. In addition only one user channel per HCI device is allowed. It is exclusive access for one user application. Access to this channel is limited to process with CAP_NET_RAW capability. Using this new facility does not require any external library or special ioctl or socket filters. Just create the socket and bind it. After that the file descriptor is ready to speak H:4 protocol. struct sockaddr_hci addr; int fd; fd = socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_HCI); memset(&addr, 0, sizeof(addr)); addr.hci_family = AF_BLUETOOTH; addr.hci_dev = 0; addr.hci_channel = HCI_CHANNEL_USER; bind(fd, (struct sockaddr *) &addr, sizeof(addr)); The example shows on how to create a user channel for hci0 device. Error handling has been left out of the example. However with the limitations mentioned above it is advised to handle errors. Binding of the user cahnnel socket can fail for various reasons. Specifically if the device is currently activated by BlueZ or if the access permissions are not present. Signed-off-by: -
Marcel Holtmann authored
This patch introduces a new user channel flag that allows to give full control of a HCI device to a user application. The kernel will stay away from the device and does not allow any further modifications of the device states. The existing raw flag is not used since it has a bit of unclear meaning due to its legacy. Using a new flag makes the code clearer. A device with the user channel flag set can still be enumerate using the legacy API, but it does not longer enumerate using the new management interface used by BlueZ 5 and beyond. This is intentional to not confuse users of modern systems. Signed-off-by:
-
Marcel Holtmann authored
The various legacy ioctls used with HCI sockets are limited to raw channel only. They are not used on the other channels and also have no meaning there. So return an error if tried to use them. Signed-off-by:
-
Marcel Holtmann authored
The HCI sockets for monitor and control do not support any HCI specific socket options and if tried, an error will be returned. However the error used is EINVAL and that is not really descriptive. To make it clear that these sockets are not handling HCI socket options, return EBADFD instead. Signed-off-by:
-
Marcel Holtmann authored
Even if this is legacy API, there is no reason to not report a proper error when trying to reset a HCI device that is down. Signed-off-by:
-
Marcel Holtmann authored
The hci_dev check is not protected and so move it into the socket lock. In addition return the HCI channel identifier instead of always 0 channel. Signed-off-by:
-
Marcel Holtmann authored
The HCI sockets do not have a peer associated with it and so make sure that getpeername() returns EOPNOTSUPP since this operation is actually not supported on HCI sockets. Signed-off-by:
-
Marcel Holtmann authored
The handling of the raw socket filter is rather obscure code and it gets in the way of future extensions. Instead of inline filtering in the raw socket packet routine, refactor it into its own function. Signed-off-by:
-
- 04 Sep, 2013 30 commits
-
-
Daniel Borkmann authored
Document force_mld_version parameter in ip-sysctl.txt. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
We already have mld_{gq,ifc,dad}_start_timer() functions, so introduce mld_{gq,ifc,dad}_stop_timer() functions to reduce code size and make it more readable. Signed-off-by: -
Daniel Borkmann authored
Make igmp6_event_query() a bit easier to read by refactoring code parts into mld_process_v1() and mld_process_v2(). Signed-off-by:
-
Daniel Borkmann authored
Similarly as we do in MLDv2 queries, set a forged MLDv1 query with 0 ms mld_maxdelay to minimum timer shot time of 1 jiffies. This is eventually done in igmp6_group_queried() anyway, so we can simplify a check there. Signed-off-by:
-
Daniel Borkmann authored
RFC3810, 10. Security Considerations says under subsection 10.1. Query Message: A forged Version 1 Query message will put MLDv2 listeners on that link in MLDv1 Host Compatibility Mode. This scenario can be avoided by providing MLDv2 hosts with a configuration option to ignore Version 1 messages completely. Hence, implement a MLDv2-only mode that will ignore MLDv1 traffic: echo 2 > /proc/sys/net/ipv6/conf/ethX/force_mld_version or echo 2 > /proc/sys/net/ipv6/conf/all/force_mld_version Note that <all> device has a higher precedence as it was previously also the case in the macro MLD_V1_SEEN() that would "short-circuit" if condition on <all> case. Signed-off-by:
-
Daniel Borkmann authored
Get rid of MLDV2_MRC and use our new macros for mantisse and exponent to calculate Maximum Response Delay out of the Maximum Response Code. Signed-off-by:
-
Daniel Borkmann authored
Replace the macro with a function to make it more readable. GCC will eventually decide whether to inline this or not (also, that's not fast-path anyway). Signed-off-by:
-
Daniel Borkmann authored
i) RFC3810, 9.2. Query Interval [QI] says: The Query Interval variable denotes the interval between General Queries sent by the Querier. Default value: 125 seconds. [...] ii) RFC3810, 9.3. Query Response Interval [QRI] says: The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. Default value: 10000 (10 seconds) [...] The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]. iii) RFC3810, 9.12. Older Version Querier Present Timeout [OVQPT] says: The Older Version Querier Present Timeout is the time-out for transitioning a host back to MLDv2 Host Compatibility Mode. When an MLDv1 query is received, MLDv2 hosts set their Older Version Querier Present Timer to [Older Version Querier Present Timeout]. This value MUST be ([Robustness Variable] times (the [Query Interval] in the last Query received)) plus ([Query Response Interval]). Hence, on *default* the timeout results in: [RV] = 2, [QI] = 125sec, [QRI] = 10sec [OVQPT] = [RV] * [QI] + [QRI] = 260sec Having that said, we currently calculate [OVQPT] (here given as 'switchback' variable) as ... switchback = (idev->mc_qrv + 1) * max_delay RFC3810, 9.12. says "the [Query Interval] in the last Query received". In section "9.14. Configuring timers", it is said: This section is meant to provide advice to network administrators on how to tune these settings to their network. Ambitious router implementations might tune these settings dynamically based upon changing characteristics of the network. [...] iv) RFC38010, 9.14.2. Query Interval: The overall level of periodic MLD traffic is inversely proportional to the Query Interval. A longer Query Interval results in a lower overall level of MLD traffic. The value of the Query Interval MUST be equal to or greater than the Maximum Response Delay used to calculate the Maximum Response Code inserted in General Query messages. I assume that was why switchback is calculated as is (3 * max_delay), although this setting seems to be meant for routers only to configure their [QI] interval for non-default intervals. So usage here like this is clearly wrong. Concluding, the current behaviour in IPv6's multicast code is not conform to the RFC as switch back is calculated wrongly. That is, it has a too small value, so MLDv2 hosts switch back again to MLDv2 way too early, i.e. ~30secs instead of ~260secs on default. Hence, introduce necessary helper functions and fix this up properly as it should be. Introduced in 06da9228 ("[IPV6]: Add MLDv2 support."). Credits to Hannes Frederic Sowa who also had a hand in this as well. Also thanks to Hangbin Liu who did initial testing. Signed-off-by:
-
Yuchung Cheng authored
Commit 1b7fdd2a("tcp: do not use cached RTT for RTT estimation") removes important comments on how RTO is initialized and updated. Hopefully this patch puts those information back. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Pravin B Shelar authored
vxlan-udp-recv function lookup vxlan_sock struct on every packet recv by using udp-port number. we can use sk->sk_user_data to store vxlan_sock and avoid lookup. I have open coded rcu-api to store and read vxlan_sock from sk_user_data to avoid sparse warning as sk_user_data is not __rcu pointer. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
There is a nice helper to parse MAC. Let's use it and remove custom implementation. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Sonic Zhang authored
driver:stmmac: Adjust time stamp increase for 0.465 ns accurate only when Time stamp binary rollover is set. The synopsys spec says When TSCRLSSR is cleard, the rollover value of sub-second register is 0x7FFFFFFF(0.465 ns per clock). Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Alexander Sverdlin authored
net: sctp: Fix data chunk fragmentation for MTU values which are not multiple of 4 Initially the problem was observed with ipsec, but later it became clear that SCTP data chunk fragmentation algorithm has problems with MTU values which are not multiple of 4. Test program was used which just transmits 2000 bytes long packets to other host. tcpdump was used to observe re-fragmentation in IP layer after SCTP already fragmented data chunks. With MTU 1500: 12:54:34.082904 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 1500) 10.151.38.153.39303 > 10.151.24.91.54321: sctp (1) [DATA] (B) [TSN: 2366088589] [SID: 0] [SSEQ 1] [PPID 0x0] 12:54:34.082933 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 596) 10.151.38.153.39303 > 10.151.24.91.54321: sctp (1) [DATA] (E) [TSN: 2366088590] [SID: 0] [SSEQ 1] [PPID 0x0] 12:54:34.090576 IP (tos 0x2,ECT(0), ttl 63, id 0, offset 0, flags [DF], proto SCTP (132), length 48) 10.151.24.91.54321 > 10.151.38.153.39303: sctp (1) [SACK] [cum ack 2366088590] [a_rwnd 79920] [#gap acks 0] [#dup tsns 0] With MTU 1499: 13:02:49.955220 IP (tos 0x2,ECT(0), ttl 64, id 48215, offset 0, flags [+], proto SCTP (132), length 1492) 10.151.38.153.39084 > 10.151.24.91.54321: sctp[|sctp] 13:02:49.955249 IP (tos 0x2,ECT(0), ttl 64, id 48215, offset 1472, flags [none], proto SCTP (132), length 28) 10.151.38.153 > 10.151.24.91: ip-proto-132 13:02:49.955262 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 600) 10.151.38.153.39084 > 10.151.24.91.54321: sctp (1) [DATA] (E) [TSN: 404355346] [SID: 0] [SSEQ 1] [PPID 0x0] 13:02:49.956770 IP (tos 0x2,ECT(0), ttl 63, id 0, offset 0, flags [DF], proto SCTP (132), length 48) 10.151.24.91.54321 > 10.151.38.153.39084: sctp (1) [SACK] [cum ack 404355346] [a_rwnd 79920] [#gap acks 0] [#dup tsns 0] Here problem in data portion limit calculation leads to re-fragmentation in IP, which is sub-optimal. The problem is max_data initial value, which doesn't take into account the fact, that data chunk must be padded to 4-bytes boundary. It's enough to correct max_data, because all later adjustments are correctly aligned to 4-bytes boundary. After the fix is applied, everything is fragmented correctly for uneven MTUs: 15:16:27.083881 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 1496) 10.151.38.153.53417 > 10.151.24.91.54321: sctp (1) [DATA] (B) [TSN: 3077098183] [SID: 0] [SSEQ 1] [PPID 0x0] 15:16:27.083907 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 600) 10.151.38.153.53417 > 10.151.24.91.54321: sctp (1) [DATA] (E) [TSN: 3077098184] [SID: 0] [SSEQ 1] [PPID 0x0] 15:16:27.085640 IP (tos 0x2,ECT(0), ttl 63, id 0, offset 0, flags [DF], proto SCTP (132), length 48) 10.151.24.91.54321 > 10.151.38.153.53417: sctp (1) [SACK] [cum ack 3077098184] [a_rwnd 79920] [#gap acks 0] [#dup tsns 0] The bug was there for years already, but - is a performance issue, the packets are still transmitted - doesn't show up with default MTU 1500, but possibly with ipsec (MTU 1438) Signed-off-by:Alexander Sverdlin <alexander.sverdlin@nsn.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Julia Lawall authored
Free_irq is not needed if there has been no request_irq. Free_irq is removed from both the probe and remove functions. The correct request_irq and free_irq are found in the open and close functions. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ *e = platform_get_irq(...); ... when != request_irq(e,...) *free_irq(e,...) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Carlos O'Donell authored
Solution: ========= - Synchronize linux's `include/uapi/linux/in6.h' with glibc's `inet/netinet/in.h'. - Synchronize glibc's `inet/netinet/in.h with linux's `include/uapi/linux/in6.h'. - Allow including the headers in either other. - First header included defines the structures and macros. Details: ======== The kernel promises not to break the UAPI ABI so I don't see why we can't just have the two userspace headers coordinate? If you include the kernel headers first you get those, and if you include the glibc headers first you get those, and the following patch arranges a coordination and synchronization between the two. Let's handle `include/uapi/linux/in6.h' from linux, and `inet/netinet/in.h' from glibc and ensure they compile in any order and preserve the required ABI. These two patches pass the following compile tests: cat >> test1.c <<EOF int main (void) { return 0; } EOF gcc -c test1.c cat >> test2.c <<EOF int main (void) { return 0; } EOF gcc -c test2.c One wrinkle is that the kernel has a different name for one of the members in ipv6_mreq. In the kernel patch we create a macro to cover the uses of the old name, and while that's not entirely clean it's one of the best solutions (aside from an anonymous union which has other issues). I've reviewed the code and it looks to me like the ABI is assured and everything matches on both sides. Notes: - You want netinet/in.h to include bits/in.h as early as possible, but it needs in_addr so define in_addr early. - You want bits/in.h included as early as possible so you can use the linux specific code to define __USE_KERNEL_DEFS based on the _UAPI_* macro definition and use those to cull in.h. - glibc was missing IPPROTO_MH, added here. Compile tested and inspected. Reported-by:Thomas Backlund <tmb@mageia.org> Cc: Thomas Backlund <tmb@mageia.org> Cc: libc-alpha@sourceware.org Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Tested-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
Carlos O'Donell <carlos@redhat.com> Signed-off-by:
-
Dan Carpenter authored
It upsets static analyzers when we don't check for allocation failure. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== This series contains updates to igb only. Todd provides a fix for igb to not look for a PBA in the iNVM on devices that are flashless. Akeem provides igb patches to add a new PHY id for i354, as well as a couple of patches to implement the new PHY id. He also provides several patches to correctly report the appropriate media type as well as correctly report advertised/supported link for i354 devices. Lastly Akeem implements a 1 second delay mechanism for i210 devices to avoid erroneous link issue with the link partner. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following batch contains: * Three fixes for the new synproxy target available in your net-next tree, from Jesper D. Brouer and Patrick McHardy. * One fix for TCPMSS to correctly handling the fragmentation case, from Phil Oester. I'll pass this one to -stable. ==================== Signed-off-by: -
Akeem G Abodunrin authored
This patch updates igb driver version to 5.0.5 Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Akeem G Abodunrin authored
This patch changes the way we report supported/advertised link for i354 devices, especially for 2.5 GB. Instead of reporting 2.5 GB for all i354 devices erroneously, check first, if it is 2.5 GB capable. Signed-off-by:
-
Akeem G Abodunrin authored
This patch changes how we get speed/duplex for non_copper devices; it now uses pcs register to get current speed and duplex instead of using generic status register that we use to detect speed/duplex for copper devices. Signed-off-by:
-
Phil Oester authored
In commit b396966c (netfilter: xt_TCPMSS: Fix missing fragmentation handling), I attempted to add safe fragment handling to xt_TCPMSS. However, Andy Padavan of Project N56U correctly points out that returning XT_CONTINUE in this function does not work. The callers (tcpmss_tg[46]) expect to receive a value of 0 in order to return XT_CONTINUE. Signed-off-by:
Phil Oester <kernel@linuxace.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Akeem G Abodunrin authored
Since i354 2.5Gb devices are not Copper media type but SerDes, so this patch changes the way we detect speed/duplex link info for this device. Signed-off-by:
-
Akeem G Abodunrin authored
PHY Power Management does not exist for i354 device. So, there is no need to read and write this register or clear go link Disconnect bit, which could cause a lot of issues. Signed-off-by:
-
Akeem G Abodunrin authored
This patch implements downshift mechanism for M88E1543 PHY, so that downshift is disabled first during link setup process, and later enabled if we are master and downshift link is negotiated. Also cleaned up return code implementation. Signed-off-by:
-
Akeem G Abodunrin authored
This patch changes PHY_ID for i354 device, now using M88E1543 instead of M88E1545. Signed-off-by:
-
Akeem G Abodunrin authored
This patch adds 1 sec delay mechanism to i210 device family, in order to avoid erroneous link issue with the link partner. Signed-off-by:
-
Todd Fujinaka authored
When a part is flashless, do not look for a PBA in the iNVM. Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Tested-by:
-
Jesper Dangaard Brouer authored
Packets reaching SYNPROXY were default dropped, as they were most likely invalid (given the recommended state matching). This patch, changes SYNPROXY target to let packets, not consumed, continue being processed by the stack. This will be more in line other target modules. As it will allow more flexible configurations of handling, logging or matching on packets in INVALID states. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
