- 20 Nov, 2019 29 commits
-
-
Anatol Pomazau authored
If a faulty initiator fails to bind the socket to the iSCSI connection before emitting a command, for instance, a subsequent send_pdu, it will crash the kernel due to a null pointer dereference in sock_sendmsg(), as shown in the log below. This patch makes sure the bind succeeded before trying to use the socket. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.4.0-rc2.iscsi+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 24.158246] Workqueue: iscsi_q_0 iscsi_xmitworker [ 24.158883] RIP: 0010:apparmor_socket_sendmsg+0x5/0x20 [...] [ 24.161739] RSP: 0018:ffffab6440043ca0 EFLAGS: 00010282 [ 24.162400] RAX: ffffffff891c1c00 RBX: ffffffff89d53968 RCX: 0000000000000001 [ 24.163253] RDX: 0000000000000030 RSI: ffffab6440043d00 RDI: 0000000000000000 [ 24.164104] RBP: 0000000000000030 R08: 0000000000000030 R09: 0000000000000030 [ 24.165166] R10: ffffffff893e66a0 R11: 0000000000000018 R12: ffffab6440043d00 [ 24.166038] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d5575a62e90 [ 24.166919] FS: 0000000000000000(0000) GS:ffff9d557db80000(0000) knlGS:0000000000000000 [ 24.167890] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.168587] CR2: 0000000000000018 CR3: 000000007a838000 CR4: 00000000000006e0 [ 24.169451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 24.170320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 24.171214] Call Trace: [ 24.171537] security_socket_sendmsg+0x3a/0x50 [ 24.172079] sock_sendmsg+0x16/0x60 [ 24.172506] iscsi_sw_tcp_xmit_segment+0x77/0x120 [ 24.173076] iscsi_sw_tcp_pdu_xmit+0x58/0x170 [ 24.173604] ? iscsi_dbg_trace+0x63/0x80 [ 24.174087] iscsi_tcp_task_xmit+0x101/0x280 [ 24.174666] iscsi_xmit_task+0x83/0x110 [ 24.175206] iscsi_xmitworker+0x57/0x380 [ 24.175757] ? __schedule+0x2a2/0x700 [ 24.176273] process_one_work+0x1b5/0x360 [ 24.176837] worker_thread+0x50/0x3c0 [ 24.177353] kthread+0xf9/0x130 [ 24.177799] ? process_one_work+0x360/0x360 [ 24.178401] ? kthread_park+0x90/0x90 [ 24.178915] ret_from_fork+0x35/0x40 [ 24.179421] Modules linked in: [ 24.179856] CR2: 0000000000000018 [ 24.180327] ---[ end trace b4b7674b6df5f480 ]--- Signed-off-by:
Anatol Pomazau <anatol@google.com> Co-developed-by:
Frank Mayhar <fmayhar@google.com> Signed-off-by:
Bharath Ravi <rbharath@google.com> Signed-off-by:
Khazhimsel Kumykov <khazhy@google.com> Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
The iSCSI target driver is the only target driver that does not wait for ongoing commands to finish before freeing a session. Make the iSCSI target driver wait for ongoing commands to finish before freeing a session. This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710 Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247 CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: target_completion target_complete_ok_work [target_core_mod] Call Trace: dump_stack+0x8a/0xd6 print_address_description.constprop.0+0x40/0x60 __kasan_report.cold+0x1b/0x33 kasan_report+0x16/0x20 __asan_load8+0x58/0x90 __lock_acquire+0xb1a/0x2710 lock_acquire+0xd3/0x200 _raw_spin_lock_irqsave+0x43/0x60 target_release_cmd_kref+0x162/0x7f0 [target_core_mod] target_put_sess_cmd+0x2e/0x40 [target_core_mod] lio_check_stop_free+0x12/0x20 [iscsi_target_mod] transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod] target_complete_ok_work+0x1b0/0x790 [target_core_mod] process_one_work+0x549/0xa40 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Allocated by task 889: save_stack+0x23/0x90 __kasan_kmalloc.constprop.0+0xcf/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xf6/0x360 transport_alloc_session+0x29/0x80 [target_core_mod] iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Freed by task 1025: save_stack+0x23/0x90 __kasan_slab_free+0x13a/0x190 kasan_slab_free+0x12/0x20 kmem_cache_free+0x146/0x400 transport_free_session+0x179/0x2f0 [target_core_mod] transport_deregister_session+0x130/0x180 [target_core_mod] iscsit_close_session+0x12c/0x350 [iscsi_target_mod] iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod] iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod] iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 The buggy address belongs to the object at ffff8881154ec9c0 which belongs to the cache se_sess_cache of size 352 The buggy address is located 176 bytes inside of 352-byte region [ffff8881154ec9c0, ffff8881154ecb20) The buggy address belongs to the page: page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0 flags: 0x2fff000000010200(slab|head) raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400 raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc Cc: Mike Christie <mchristi@redhat.com> Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.orgReviewed-by:Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
The SCSI specs require releasing SPC-2 reservations when a session is closed. Make sure that the target core does this. Running the libiscsi tests triggers the KASAN complaint shown below. This patch fixes that use-after-free. BUG: KASAN: use-after-free in target_check_reservation+0x171/0x980 [target_core_mod] Read of size 8 at addr ffff88802ecd1878 by task iscsi_trx/17200 CPU: 0 PID: 17200 Comm: iscsi_trx Not tainted 5.4.0-rc1-dbg+ #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x8a/0xd6 print_address_description.constprop.0+0x40/0x60 __kasan_report.cold+0x1b/0x34 kasan_report+0x16/0x20 __asan_load8+0x58/0x90 target_check_reservation+0x171/0x980 [target_core_mod] __target_execute_cmd+0xb1/0xf0 [target_core_mod] target_execute_cmd+0x22d/0x4d0 [target_core_mod] transport_generic_new_cmd+0x31f/0x5b0 [target_core_mod] transport_handle_cdb_direct+0x6f/0x90 [target_core_mod] iscsit_execute_cmd+0x381/0x3f0 [iscsi_target_mod] iscsit_sequence_cmd+0x13b/0x1f0 [iscsi_target_mod] iscsit_process_scsi_cmd+0x4c/0x130 [iscsi_target_mod] iscsit_get_rx_pdu+0x8e8/0x15f0 [iscsi_target_mod] iscsi_target_rx_thread+0x105/0x1b0 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Allocated by task 1079: save_stack+0x23/0x90 __kasan_kmalloc.constprop.0+0xcf/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xfe/0x3a0 transport_alloc_session+0x29/0x80 [target_core_mod] iscsi_target_login_thread+0xceb/0x1920 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Freed by task 17193: save_stack+0x23/0x90 __kasan_slab_free+0x13a/0x190 kasan_slab_free+0x12/0x20 kmem_cache_free+0xc8/0x3e0 transport_free_session+0x179/0x2f0 [target_core_mod] transport_deregister_session+0x121/0x170 [target_core_mod] iscsit_close_session+0x12c/0x350 [iscsi_target_mod] iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod] iscsit_response_queue+0x8fa/0xc00 [iscsi_target_mod] iscsi_target_tx_thread+0x28e/0x390 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 The buggy address belongs to the object at ffff88802ecd1860 which belongs to the cache se_sess_cache of size 352 The buggy address is located 24 bytes inside of 352-byte region [ffff88802ecd1860, ffff88802ecd19c0) The buggy address belongs to the page: page:ffffea0000bb3400 refcount:1 mapcount:0 mapping:ffff8880bef2ed00 index:0x0 compound_mapcount: 0 flags: 0x1000000000010200(slab|head) raw: 1000000000010200 dead000000000100 dead000000000122 ffff8880bef2ed00 raw: 0000000000000000 0000000080270027 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88802ecd1700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88802ecd1780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88802ecd1800: fb fb fb fb fc fc fc fc fc fc fc fc fb fb fb fb ^ ffff88802ecd1880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88802ecd1900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Cc: Mike Christie <mchristi@redhat.com> Link: https://lore.kernel.org/r/20191113220508.198257-2-bvanassche@acm.orgReviewed-by: -
Bart Van Assche authored
Since it is nontrivial to derive the meaning of the size argument from the code, add a documentation header above target_cmd_size_check(). Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Link: https://lore.kernel.org/r/20191107215458.64242-1-bvanassche@acm.orgSigned-off-by:
-
Pan Bian authored
The member hba->pcidev may be used after its reference is dropped. Move the put function to where it is never used to avoid potential use after free issues. Fixes: a7717180 ("[SCSI] bnx2i: Removed the reference to the netdev->base_addr") Link: https://lore.kernel.org/r/1573043541-19126-1-git-send-email-bianpan2016@163.comSigned-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Martin K. Petersen authored
This reverts commit 2f856d4e. This patch was found to introduce a double free regression. The issue it originally attempted to address was fixed in patch f45bca8c ("scsi: qla2xxx: Fix double scsi_done for abort path"). Link: https://lore.kernel.org/r/4BDE2B95-835F-43BE-A32C-2629D7E03E0A@marvell.comRequested-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Finn Thain authored
Add a module parameter to inhibit disconnect/reselect for individual targets. This gains compatibility with Aztec PowerMonster SCSI/SATA adapters with buggy firmware. (No fix is available from the vendor.) Apparently these adapters pass-through the product/vendor of the attached SATA device. Since they can't be identified from the response to an INQUIRY command, a device blacklist flag won't work. Cc: Michael Schmitz <schmitzmic@gmail.com> Link: https://lore.kernel.org/r/993b17545990f31f9fa5a98202b51102a68e7594.1573875417.git.fthain@telegraphics.com.auReviewed-and-tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Finn Thain authored
When do_abort() succeeds, the target will go to BUS FREE phase and there will be no connected command. Therefore, that function should clear the Initiator Command Register before returning. It already does so in case of NCR5380_poll_politely() failure; do the same for the other error case too, that is, NCR5380_transfer_pio() failure. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Ondrej Zary <linux@zary.sk> Link: https://lore.kernel.org/r/4277b28ee2551f884aefa85965ef3c498344f301.1573875417.git.fthain@telegraphics.com.auReviewed-and-tested-by:
Ondrej Zary <linux@zary.sk> Signed-off-by:
-
Finn Thain authored
Most NCR5380 drivers calculate the residual for every data transfer. (A few drivers just set it to zero.) Pass this quantity back to the scsi mid-layer on command completion. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Ondrej Zary <linux@zary.sk> Link: https://lore.kernel.org/r/1f26ead9dd0dc053fcd27979d69a7ca74b6589b4.1573875417.git.fthain@telegraphics.com.auReviewed-and-tested-by:
-
Maurizio Lombardi authored
Passing the parameter "num_tgts=-1" will start an infinite loop that exhausts the system memory Link: https://lore.kernel.org/r/20191115163727.24626-1-mlombard@redhat.comSigned-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
James Smart authored
Looking at the recent conversion from smp_processor_id() to raw_smp_processor_id(), realized that the allocation should be based on the cpu the hdwq is bound to, not the executing cpu. Revise to pull cpu number from the hdwq Fixes: 765ab6cd ("scsi: lpfc: Fix a kernel warning triggered by lpfc_get_sgl_per_hdwq()") Link: https://lore.kernel.org/r/20191116003847.6141-1-jsmart2021@gmail.comSigned-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Colin Ian King authored
There are a few statements that are indented incorrectly, fix these. Link: https://lore.kernel.org/r/20191114180007.325856-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Pan Bian authored
The variable init_fw_cb is released twice, resulting in a double free bug. The call to the function dma_free_coherent() before goto is removed to get rid of potential double free. Fixes: 2a49a78e ("[SCSI] qla4xxx: added IPv6 support.") Link: https://lore.kernel.org/r/1572945927-27796-1-git-send-email-bianpan2016@163.comSigned-off-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
Deepak Ukey authored
Added the correct method to collect the fatal dump. Link: https://lore.kernel.org/r/20191114100910.6153-14-deepak.ukey@microchip.comReported-by:
kbuild test robot <lkp@intel.com> Acked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by:
Viswas G <Viswas.G@microchip.com> Signed-off-by:
-
Vikram Auradkar authored
With MSI-x enabled, the interrupt instances are <prefix><index> where the prefix is fixed for all module instances, making it a little harder to track down what's what. Link: https://lore.kernel.org/r/20191114100910.6153-13-deepak.ukey@microchip.comAcked-by:
Vikram Auradkar <auradkar@google.com> Signed-off-by:
-
Deepak Ukey authored
Added support to check controller fatal error through sysfs. Link: https://lore.kernel.org/r/20191114100910.6153-12-deepak.ukey@microchip.comAcked-by:
-
peter chang authored
Occasionally, 6G capable drives fail to train at 6G on links that look good from a signal-integrity perspective. PMC suggests configuring the port to not even expect 12G. Link: https://lore.kernel.org/r/20191114100910.6153-11-deepak.ukey@microchip.comAcked-by:
peter chang <dpf@google.com> Signed-off-by:
-
peter chang authored
Added the fix so the if driver properly sent the abort it tries to remove it from the firmware's list of outstanding commands regardless of the abort status. This means that the task gets freed 'now' rather than possibly getting freed later when the scsi layer thinks it's leaked but still valid. Link: https://lore.kernel.org/r/20191114100910.6153-10-deepak.ukey@microchip.comAcked-by:
-
peter chang authored
The commands to the controller are sent in fixed sized chunks which are set per-chip-generation and stashed in iomb_size. The driver fills in structs matching the register layout and memcpy this to memory shared with the controller. However, there are two problem cases: 1) Things like phy_start_req are too large because they share the sas_identify_frame definition with libsas, and it includes the crc word. This means that it's overwriting the start of the next command block, that's ok except if it happens at the end of the shared memory area. 2) Things like set_nvm_data_req which are shared between the HAL layers. This means that it's sending 'random' data for things that are in the reserved area. So far we haven't found a case where the controller FW cares, but sending possible gibberish (for most of the structures this is in the reserved area so previously zeroed) is not recommended. Link: https://lore.kernel.org/r/20191114100910.6153-9-deepak.ukey@microchip.comAcked-by:
-
Vikram Auradkar authored
sas_task structure should not be used after task_done is called. If the device is gone or not attached, we call task_done on t and continue to use in the sas_task in rest of the function. task_done is pointing to sas_ata_task_done, may free the memory associated with the task before returning. Link: https://lore.kernel.org/r/20191114100910.6153-8-deepak.ukey@microchip.comAcked-by:
-
ianyar authored
The function mpi_uninit_check takes longer for inbound doorbell register to be cleared. Increased the timeout substantially so that the driver does not fail to load. Link: https://lore.kernel.org/r/20191114100910.6153-7-deepak.ukey@microchip.comAcked-by:
ianyar <ianyar@google.com> Signed-off-by:
-
peter chang authored
The default logging doesn't include the device name, so it's difficult to determine which controller is being logged about in error scenarios. The logging level was only settable via sysfs, which made it inconvenient for actual debugging. This changes the default to only cover error handling. Link: https://lore.kernel.org/r/20191114100910.6153-6-deepak.ukey@microchip.comAcked-by:
-
Vikram Auradkar authored
For delays longer than 20ms [um]delay isn't recommended. pm80xx_chip_soft_rst starts off with a 500ms delay before it even gets around to checking for the results of the reset. As long as it's at least 500ms it doesn't matter what the scheduler is doing. The delay in the pm8001_exec_internal_task_abort does nothing, and theory is this is a delay to avoid a double-free. Link: https://lore.kernel.org/r/20191114100910.6153-5-deepak.ukey@microchip.comAcked-by:
-
John Sperbeck authored
In pm8001_task_exec(), if the PHY is down, then we return the current value of 'rc'. We need to make sure it's initialized. Link: https://lore.kernel.org/r/20191114100910.6153-4-deepak.ukey@microchip.comAcked-by:
John Sperbeck <jsperbeck@google.com> Signed-off-by:
-
peter chang authored
After the completing the mpi_phy_start_resp, make phy enable completion as NULL. Link: https://lore.kernel.org/r/20191114100910.6153-3-deepak.ukey@microchip.comAcked-by:
-
peter chang authored
Driver was missing complete() call in mpi_sata_completion which result in SATA abort error handling timing out. That causes the device to be left in the in_recovery state so subsequent commands sent to the device fail and the OS removes access to it. Link: https://lore.kernel.org/r/20191114100910.6153-2-deepak.ukey@microchip.comAcked-by:
-
Subhash Jadavani authored
During clock gating (ufshcd_gate_work()), we first put the link hibern8 by calling ufshcd_uic_hibern8_enter() and if ufshcd_uic_hibern8_enter() returns success (0) then we gate all the clocks. Now let’s zoom in to what ufshcd_uic_hibern8_enter() does internally: It calls __ufshcd_uic_hibern8_enter() and if failure is encountered, link recovery shall put the link back to the highest HS gear and returns success (0) to ufshcd_uic_hibern8_enter() which is the issue as link is still in active state due to recovery! Now ufshcd_uic_hibern8_enter() returns success to ufshcd_gate_work() and hence it goes ahead with gating the UFS clock while link is still in active state hence I believe controller would raise UIC error interrupts. But when we service the interrupt, clocks might have already been disabled! This change fixes for this by returning failure from __ufshcd_uic_hibern8_enter() if recovery succeeds as link is still not in hibern8, upon receiving the error ufshcd_hibern8_enter() would initiate retry to put the link state back into hibern8. Link: https://lore.kernel.org/r/1573798172-20534-8-git-send-email-cang@codeaurora.orgReviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
-
Asutosh Das authored
This change attempts to abort gating of clocks if a request to turn-on clocks is pending. This would in turn avoid turning OFF and back ON the clocks. Link: https://lore.kernel.org/r/1573798172-20534-7-git-send-email-cang@codeaurora.orgReviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Signed-off-by:
-
Venkat Gopalakrishnan authored
Return IRQ_HANDLED only if the irq is really handled, this will help in catching spurious interrupts that go unhandled. Link: https://lore.kernel.org/r/1573798172-20534-6-git-send-email-cang@codeaurora.orgReviewed-by:
Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by:
-
- 19 Nov, 2019 4 commits
-
-
Can Guo authored
ufshcd_print_host_regs() can be called by interrupt handler, but it may sleep due to ufshcd_dump_regs() allocates the dump buffer memory with flag GFP_KERNEL. Fix it by changing GFP_KERNEL to GFP_ATMOIC. Link: https://lore.kernel.org/r/1573798172-20534-5-git-send-email-cang@codeaurora.orgReviewed-by:
-
Can Guo authored
Fix up possible unclocked register access to auto hibern8 register in resume path and through sysfs entry. Meanwhile, enable auto hibern8 only after device is fully initialized in probe path. Link: https://lore.kernel.org/r/1573798172-20534-4-git-send-email-cang@codeaurora.orgReviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Can Guo authored
Add reset control for host controller so that host controller can be reset as required in its power up sequence. Link: https://lore.kernel.org/r/1573798172-20534-3-git-send-email-cang@codeaurora.orgReviewed-by:
-
Can Guo authored
In order to recover from hibern8 exit failure, perform a reset in link recovery path before issuing link start-up. Link: https://lore.kernel.org/r/1573798172-20534-2-git-send-email-cang@codeaurora.orgReviewed-by:
-
- 13 Nov, 2019 7 commits
-
-
Finn Thain authored
Remove SG_NONE and a related misleading comment. Update documentation. This patch does not affect behaviour as zero initialization is redundant. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Viresh Kumar <vireshk@kernel.org> Cc: Oliver Neukum <oneukum@suse.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: usb-storage@lists.one-eyed-alien.net Link: https://lore.kernel.org/r/b4779b7a6563f6bd8d259ee457871c1c463c420e.1572656814.git.fthain@telegraphics.com.auSigned-off-by:
-
Finn Thain authored
Since the scsi subsystem adopted the blk-mq API, a host with zero sg_tablesize crashes with a NULL pointer dereference. blk_queue_max_segments: set to minimum 1 scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 scsi target0:0:0: Beginning Domain Validation scsi target0:0:0: Domain Validation skipping write tests scsi target0:0:0: Ending Domain Validation blk_queue_max_segments: set to minimum 1 scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 scsi target0:0:1: Beginning Domain Validation scsi target0:0:1: Domain Validation skipping write tests scsi target0:0:1: Ending Domain Validation blk_queue_max_segments: set to minimum 1 scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5 scsi target0:0:2: Beginning Domain Validation scsi target0:0:2: Domain Validation skipping write tests scsi target0:0:2: Ending Domain Validation blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 sr 0:0:2:0: Power-on or device reset occurred sd 0:0:0:0: Power-on or device reset occurred sd 0:0:1:0: Power-on or device reset occurred sd 0:0:0:0: [sda] 10485762 512-byte logical blocks: (5.37 GB/5.00 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Unable to handle kernel NULL pointer dereference at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<001cd874>] blk_mq_free_request+0x66/0xe2 SR: 2004 SP: (ptrval) a2: 00874520 d0: 00000000 d1: 00000000 d2: 009ba800 d3: 00000000 d4: 00000000 d5: 08000002 a0: 0087be68 a1: 009a81e0 Process kworker/u2:2 (pid: 15, task=(ptrval)) Frame format=7 eff addr=0000007a ssw=0505 faddr=0000007a wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 0000007a 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 0087bd98: 00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4 0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c 00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68 00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000 009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74 00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000 Call Trace: [<001c4f6c>] blk_put_request+0xe/0x14 [<0024d200>] __scsi_execute+0x124/0x174 [<0024d0dc>] __scsi_execute+0x0/0x174 [<00265d10>] sd_revalidate_disk+0xba/0x1f02 [<00265c56>] sd_revalidate_disk+0x0/0x1f02 [<0036ddf4>] strlen+0x0/0x22 [<00227ba0>] device_add+0x3da/0x604 [<0036ddf4>] strlen+0x0/0x22 [<00267e64>] sd_probe+0x30c/0x4b4 [<0002da44>] process_one_work+0x0/0x402 [<0022b978>] really_probe+0x226/0x354 [<0022bc34>] driver_probe_device+0xa4/0xf0 [<0002da44>] process_one_work+0x0/0x402 [<0022bcd0>] __driver_attach_async_helper+0x50/0x70 [<00035dae>] async_run_entry_fn+0x36/0x130 [<0002db88>] process_one_work+0x144/0x402 [<0002e1aa>] worker_thread+0x0/0x570 [<0002e29a>] worker_thread+0xf0/0x570 [<0002e1aa>] worker_thread+0x0/0x570 [<003768d8>] schedule+0x0/0xb8 [<0003f58c>] __init_waitqueue_head+0x0/0x12 [<00033e92>] kthread+0xc2/0xf6 [<000331e8>] kthread_parkme+0x0/0x4e [<003768d8>] schedule+0x0/0xb8 [<00033dd0>] kthread+0x0/0xf6 [<00002c10>] ret_from_kernel_thread+0xc/0x14 Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c Disabling lock debugging due to kernel taint Avoid this by setting sg_tablesize = 1. Link: https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.auReported-and-tested-by: -
Johan Hovold authored
For some reason this driver depends on !64BIT, but it can still be useful to allow compile-testing on 64-bit machines. Link: https://lore.kernel.org/r/20191105085609.2338-3-johan@kernel.orgSigned-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
The MODULE_LICENSE macro is unconditionally defined in module.h, no need to ifdef its use. Link: https://lore.kernel.org/r/20191105085609.2338-2-johan@kernel.orgSigned-off-by:
-
YueHaibing authored
platform_get_irq() will call dev_err() itself on failure, so there is no need for the driver to also do this. This is detected by coccinelle. Link: https://lore.kernel.org/r/20191101140058.23212-1-yuehaibing@huawei.comSigned-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Kars de Jong authored
When using this driver on a Blizzard 1260, there were failures whenever DMA transfers from the SCSI bus to memory of 65535 bytes were followed by a DMA transfer of 1 byte. This caused the byte at offset 65535 to be overwritten with 0xff. The Blizzard hardware can't handle single byte DMA transfers. Besides this issue, limiting the DMA length to something that is not a multiple of the page size is very inefficient on most file systems. It seems this limit was chosen because the DMA transfer counter of the ESP by default is 16 bits wide, thus limiting the length to 65535 bytes. However, the value 0 means 65536 bytes, which is handled by the ESP and the Blizzard just fine. It is also the default maximum used by esp_scsi when drivers don't provide their own dma_length_limit() function. The limit of 65536 bytes can be used by all boards except the Fastlane. The old driver used a limit of 65532 bytes (0xfffc), which is reintroduced in this patch. Fixes: b7ded0e8 ("scsi: zorro_esp: Limit DMA transfers to 65535 bytes") Link: https://lore.kernel.org/r/20191112175523.23145-1-jongk@linux-m68k.orgSigned-off-by:
Kars de Jong <jongk@linux-m68k.org> Reviewed-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/csiostor/csio_lnode.c: In function 'csio_ln_init': drivers/scsi/csiostor/csio_lnode.c:1995:21: warning: variable 'rln' set but not used [-Wunused-but-set-variable] It is never used since introduction, so remove it. Link: https://lore.kernel.org/r/20191029061530.98197-1-yuehaibing@huawei.comSigned-off-by:
-
