walk_page_range() silently skips vma having VM_PFNMAP set, which leads
to undesirable behaviour at client end (who called walk_page_range).
Userspace applications get the wrong data, so the effect is like just
confusing users (if the applications just display the data) or sometimes
killing the processes (if the applications do something with
misunderstanding virtual addresses due to the wrong data.)

For example for pagemap_read, when no callbacks are called against
VM_PFNMAP vma, pagemap_read may prepare pagemap data for next virtual
address range at wrong index.

Eventually userspace may get wrong pagemap data for a task.
Corresponding to a VM_PFNMAP marked vma region, kernel may report
mappings from subsequent vma regions.  User space in turn may account
more pages (than really are) to the task.

In my case I was using procmem, procrack (Android utility) which uses
pagemap interface to account RSS pages of a task.  Due to this bug it
was giving a wrong picture for vmas (with VM_PFNMAP set).

Fixes: a9ff785e ("mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas")
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>	[3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Stretch ACKs can kill performance with Reno and CUBIC congestion
    control, largely due to LRO and GRO.  Fix from Neal Cardwell.

 2) Fix userland breakage because we accidently emit zero length netlink
    messages from the bridging code.  From Roopa Prabhu.

 3) Carry handling in generic csum_tcpudp_nofold is broken, fix from
    Karl Beldan.

 4) Remove bogus dev_set_net() calls from CAIF driver, from Nicolas
    Dichtel.

 5) Make sure PPP deflation never returns a length greater then the
    output buffer, otherwise we overflow and trigger skb_over_panic().
    Fix from Florian Westphal.

 6) COSA driver needs VIRT_TO_BUS Kconfig dependencies, from Arnd
    Bergmann.

 7) Don't increase route cached MTU on datagram too big ICMPs.  From Li
    Wei.

 8) Fix error path leaks in nf_tables, from Pablo Neira Ayuso.

 9) Fix bitmask handling regression in netlink that broke things like
    acpi userland tools.  From Pablo Neira Ayuso.

10) Wrong header pointer passed to param_type2af() in SCTP code, from
    Saran Maruti Ramanara.

11) Stacked vlans not handled correctly by vlan_get_protocol(), from
    Toshiaki Makita.

12) Add missing DMA memory barrier to xgene driver, from Iyappan
    Subramanian.

13) Fix crash in rate estimators, from Eric Dumazet.

14) We've been adding various workarounds, one after another, for the
    change which added the per-net tcp_sock.  It was meant to reduce
    socket contention but added lots of problems.

    Reduce this instead to a proper per-cpu socket and that rids us of
    all the daemons.

    From Eric Dumazet.

15) Fix memory corruption and OOPS in mlx4 driver, from Jack
    Morgenstein.

16) When we disabled UFO in the virtio_net device, it introduces some
    serious performance regressions.  The orignal problem was IPV6
    fragment ID generation, so fix that properly instead.  From Vlad
    Yasevich.

17) sr9700 driver build breaks on xtensa because it defines macros with
    the same name as those used by the arch code.  Use more unique
    names.  From Chen Gang.

18) Fix endianness in new virio 1.0 mode of the vhost net driver, from
    Michael S Tsirkin.

19) Several sysctls were setting the maxlen attribute incorrectly, from
    Sasha Levin.

20) Don't accept an FQ scheduler quantum of zero, that leads to crashes.
    From Kenneth Klette Jonassen.

21) Fix dumping of non-existing actions in the packet scheduler
    classifier.  From Ignacy Gawędzki.

22) Return the write work_done value when doing TX work in the qlcnic
    driver.

23) ip6gre_err accesses the info field with the wrong endianness, from
    Sabrina Dubroca.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
  sit: fix some __be16/u16 mismatches
  ipv6: fix sparse errors in ip6_make_flowlabel()
  net: remove some sparse warnings
  flow_keys: n_proto type should be __be16
  ip6_gre: fix endianness errors in ip6gre_err
  qlcnic: Fix NAPI poll routine for Tx completion
  amd-xgbe: Set RSS enablement based on hardware features
  amd-xgbe: Adjust for zero-based traffic class count
  cls_api.c: Fix dumping of non-existing actions' stats.
  pkt_sched: fq: avoid hang when quantum 0
  net: rds: use correct size for max unacked packets and bytes
  vhost/net: fix up num_buffers endian-ness
  gianfar: correct the bad expression while writing bit-pattern
  net: usb: sr9700: Use 'SR_' prefix for the common register macros
  Revert "drivers/net: Disable UFO through virtio"
  Revert "drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets"
  ipv6: Select fragment id during UFO segmentation if not set.
  xen-netback: stop the guest rx thread after a fatal error
  net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than 80 VFs
  isdn: off by one in connect_res()
  ...

Pull SCSI fixes from James Bottomley:
 "This patch set is fixing two serious problems which have turned up
  late in the release cycle.

  The first fixes a problem with 4k sector disks where the transfer
  length (amount of data sent to the disk) was getting increased every
  time the disk was revalidated leading to potential for overflows.

  The other is a regression oops fix for some of our last merge window
  code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  sd: Fix max transfer length for 4k disks
  scsi: fix device handler detach oops

Pull drm fixes from Dave Airlie:
 "Radeon and amdkfd fixes.

  Radeon ones mostly for oops in some test/benchmark functions since
  fencing changes, and one regression fix for old GPUs,

  There is one cirrus regression fix, the 32bpp broke userspace, so this
  hides it behind a module option for the few users who care.

  I'm off for a few days, so this is probably the final pull I have, if
  I see fixes from Intel I'll forward the pull as I should have email"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/cirrus: Limit modes depending on bpp option
  drm/radeon: fix the crash in test functions
  drm/radeon: fix the crash in benchmark functions
  drm/radeon: properly set vm fragment size for TN/RL
  drm/radeon: don't init gpuvm if accel is disabled (v3)
  drm/radeon: fix PLLs on RS880 and older v2
  drm/amdkfd: Don't create BUG due to incorrect user parameter
  drm/amdkfd: max num of queues can't be 0
  drm/amdkfd: Fix bug in accounting of queues

Pull spi fixes from Mark Brown:
 "A couple of driver specific fixes:

   - Disable DMA mode for i.MX6DL chips due to a hardware bug.

   - Don't use devm_kzalloc() outside of bind/unbind paths in the
     fsl-dspi driver, fixing memory leaks"

* tag 'spi-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: imx: use pio mode for i.mx6dl
  spi: spi-fsl-dspi: Remove usage of devm_kzalloc

Pull ACPI power management fix from Rafael  Wysocki:
 "This is a revert of an ACPI Low-power Subsystem (LPSS) driver change
  that was supposed to improve power management of the LPSS DMA
  controller, but introduced more serious problems.

  Since fixing them turns out to be non-trivial, it is better to revert
  the commit in question at this point and try to fix the original issue
  differently in the next cycle"

* tag 'pm+acpi-3.19-fin' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA"

Pull PCI fixes from Bjorn Helgaas:
 "Enumeration
    - Scan all device numbers on NEC as well as Stratus (Charlotte Richardson)

  Resource management
    - Handle read-only BARs on AMD CS553x devices (Myron Stowe)

  Synopsys DesignWare
    - Reject MSI-X IRQs (Lucas Stach)"

* tag 'pci-v3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Handle read-only BARs on AMD CS553x devices
  PCI: Add NEC variants to Stratus ftServer PCIe DMI check
  PCI: designware: Reject MSI-X IRQs

Fixes following sparse warnings :

net/ipv6/sit.c:1509:32: warning: incorrect type in assignment (different base types)
net/ipv6/sit.c:1509:32:    expected restricted __be16 [usertype] sport
net/ipv6/sit.c:1509:32:    got unsigned short
net/ipv6/sit.c:1514:32: warning: incorrect type in assignment (different base types)
net/ipv6/sit.c:1514:32:    expected restricted __be16 [usertype] dport
net/ipv6/sit.c:1514:32:    got unsigned short
net/ipv6/sit.c:1711:38: warning: incorrect type in argument 3 (different base types)
net/ipv6/sit.c:1711:38:    expected unsigned short [unsigned] [usertype] value
net/ipv6/sit.c:1711:38:    got restricted __be16 [usertype] sport
net/ipv6/sit.c:1713:38: warning: incorrect type in argument 3 (different base types)
net/ipv6/sit.c:1713:38:    expected unsigned short [unsigned] [usertype] value
net/ipv6/sit.c:1713:38:    got restricted __be16 [usertype] dport
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

include/net/ipv6.h:713:22: warning: incorrect type in assignment (different base types)
include/net/ipv6.h:713:22:    expected restricted __be32 [usertype] hash
include/net/ipv6.h:713:22:    got unsigned int
include/net/ipv6.h:719:25: warning: restricted __be32 degrades to integer
include/net/ipv6.h:719:22: warning: invalid assignment: ^=
include/net/ipv6.h:719:22:    left side has type restricted __be32
include/net/ipv6.h:719:22:    right side has type unsigned int
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev_adjacent_add_links() and netdev_adjacent_del_links()
are static.

queue->qdisc has __rcu annotation, need to use RCU_INIT_POINTER()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

(struct flow_keys)->n_proto is in network order, use
proper type for this.

Fixes following sparse errors :

net/core/flow_dissector.c:139:39: warning: incorrect type in assignment (different base types)
net/core/flow_dissector.c:139:39:    expected unsigned short [unsigned] [usertype] n_proto
net/core/flow_dissector.c:139:39:    got restricted __be16 [assigned] [usertype] proto
net/core/flow_dissector.c:237:23: warning: incorrect type in assignment (different base types)
net/core/flow_dissector.c:237:23:    expected unsigned short [unsigned] [usertype] n_proto
net/core/flow_dissector.c:237:23:    got restricted __be16 [assigned] [usertype] proto
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: e0f31d84 ("flow_keys: Record IP layer protocol in skb_flow_dissect()")
Signed-off-by: David S. Miller <davem@davemloft.net>

info is in network byte order, change it back to host byte order
before use. In particular, the current code sets the MTU of the tunnel
to a wrong (too big) value.

Fixes: c12b395a ("gre: Support GRE over IPv6")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After d75b1ade ("net: less interrupt masking in NAPI")
driver's NAPI poll routine is expected to return
exact budget value if it wants to be re-called.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Fixes: d75b1ade ("net: less interrupt masking in NAPI")
Signed-off-by: David S. Miller <davem@davemloft.net>

The RSS support requires enablement based on the features reported by
the hardware. The setting of this flag is missing. Add support to
set the RSS enablement flag based on the reported hardware features.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The number of traffic classes reported by the hardware is zero-based
so increment the value returned to get an actual count.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In tcf_exts_dump_stats(), ensure that exts->actions is not empty before
accessing the first element of that list and calling tcf_action_copy_stats()
on it.  This fixes some random segvs when adding filters of type "basic" with
no particular action.

This also fixes the dumping of those "no-action" filters, which more often
than not made calls to tcf_action_copy_stats() fail and consequently netlink
attributes added by the caller to be removed by a call to nla_nest_cancel().

Fixes: 33be6271 ("net_sched: act: use standard struct list_head")
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Configuring fq with quantum 0 hangs the system, presumably because of a
non-interruptible infinite loop. Either way quantum 0 does not make sense.

Reproduce with:
sudo tc qdisc add dev lo root fq quantum 0 initial_quantum 0
ping 127.0.0.1
Signed-off-by: Kenneth Klette Jonassen <kennetkl@ifi.uio.no>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit [8975626e: drm/cirrus: allow 32bpp framebuffers for
cirrus drm] broke X modesetting driver because cirrus driver still
provides the full list of modes up to 1280x1024 while the 32bpp can
support only up to 800x600.

We might be able to filter out the invalid modes in mode_valid
callback, but unfortunately the bpp in question can't be referred
there for now (let me know if there is a better way to retrieve the
bpp for the probed fb).

So, instead, this patch adds the bpp module option to specify the
maximal bpp explicitly and limits the resolutions in get_modes
depending on its value.

The default value is set to 24 so that the existing stuff keeps
working.  If you need a new 32bpp feature, specify cirrus.bpp=32
option explicitly.

Fixes: 8975626e ('drm/cirrus: allow 32bpp framebuffers for cirrus drm')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Max unacked packets/bytes is an int while sizeof(long) was used in the
sysctl table.

This means that when they were getting read we'd also leak kernel memory
to userspace along with the timeout values.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In virtio 1.0 mode, when mergeable buffers are enabled on a big-endian
host, num_buffers wasn't byte-swapped correctly, so large incoming
packets got corrupted.

To fix, fill it in within hdr - this also makes sure it gets
the correct type.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch correct the bad expression while writing the
bit-pattern from software's buffer to hardware registers.
Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commone register macors (e.g. RSR) is too commont to drivers, it may
be conflict with the architectures (e.g. xtensa, sh).

The related warnings (with allmodconfig under xtensa):

    CC [M]  drivers/net/usb/sr9700.o
  In file included from drivers/net/usb/sr9700.c:24:0:
  drivers/net/usb/sr9700.h:65:0: warning: "RSR" redefined
   #define RSR   0x06
   ^
  In file included from ./arch/xtensa/include/asm/bitops.h:22:0,
                   from include/linux/bitops.h:36,
                   from include/linux/kernel.h:10,
                   from include/linux/list.h:8,
                   from include/linux/module.h:9,
                   from drivers/net/usb/sr9700.c:13:
  ./arch/xtensa/include/asm/processor.h:190:0: note: this is the location of the previous definition
   #define RSR(v,sr) __asm__ __volatile__ ("rsr %0,"__stringify(sr) : "=a"(v));
   ^
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull cifs fixes from Steve French:
 "Three small cifs fixes.  One fixes a hang under stress, and the other
  two are security related"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix MUST SecurityFlags filtering
  Complete oplock break jobs before closing file handle
  cifs: use memzero_explicit to clear stack buffer

Pull ARM fixes from Russell King:
 "A number of ARM fixes, the biggest is fixing a regression caused by
  appended DT blobs exceeding 64K, causing the decompressor fixup code
  to fail to patch the DT blob.  Another important fix is for the ASID
  allocator from Will Deacon which prevents some rare crashes seen on
  some systems.  Lastly, there's a build fix for v7M systems when printk
  support is disabled.

  The last two remaining fixes are more cosmetic - the IOMMU one
  prevents an annoying harmless warning message, and we disable the
  kernel strict memory permissions on non-MMU which can't support it
  anyway"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8299/1: mm: ensure local active ASID is marked as allocated on rollover
  ARM: 8298/1: ARM_KERNMEM_PERMS only works with MMU enabled
  ARM: 8295/1: fix v7M build for !CONFIG_PRINTK
  ARM: 8294/1: ATAG_DTB_COMPAT: remove the DT workspace's hardcoded 64KB size
  ARM: 8288/1: dma-mapping: don't detach devices without an IOMMU during teardown

Vladislav Yasevich says:

====================
Restore UFO support to virtio_net devices

commit 3d0ad094
Author: Ben Hutchings <ben@decadent.org.uk>
Date:   Thu Oct 30 18:27:12 2014 +0000

    drivers/net: Disable UFO through virtio

Turned off UFO support to virtio-net based devices due to issues
with IPv6 fragment id generation for UFO packets.  The issue
was that IPv6 UFO/GSO implementation expects the fragment id
to be supplied in skb_shinfo().  However, for packets generated
by the VMs, the fragment id is not supplied which causes all
IPv6 fragments to have the id of 0.

The problem is that turning off UFO support on tap/macvtap
as well as virtio devices caused issues with migrations.
Migrations would fail when moving a vm from a kernel supporting
expecting UFO to work to the newer kernels that disabled UFO.

This series provides a partial solution to address the migration
issue.  The series allows us to track whether skb_shinfo()->ip6_frag_id
has been set by treating value of 0 as unset.
This lets GSO code to generate fragment ids if they are necessary
(ex: packet was generated by VM or packet socket).

Since v3:
  - Resolved build issue when IPv6 is a module.
  - Removed trailing white space.

Since v2:
  - Rebase and rebuild to make sure everything works.  No changes
    to the patches were done.

Since v1:
  - Removed the skb bit and use value of 0 as tracker.
  - Used Eric's suggestion to set fragment id as 0x80000000 if id
    generation procedure yeilded a 0 result.
  - Consolidated ipv6 id genration code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 3d0ad094.

Now that GSO functionality can correctly track if the fragment
id has been selected and select a fragment id if necessary,
we can re-enable UFO on tap/macvap and virtio devices.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 5188cd44.

Now that GSO layer can track if fragment id has been selected
and can allocate one if necessary, we don't need to do this in
tap and macvtap.  This reverts most of the code and only keeps
the new ipv6 fragment id generation function that is still needed.

Fixes: 3d0ad094 (drivers/net: Disable UFO through virtio)
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the IPv6 fragment id has not been set and we perform
fragmentation due to UFO, select a new fragment id.
We now consider a fragment id of 0 as unset and if id selection
process returns 0 (after all the pertrubations), we set it to
0x80000000, thus giving us ample space not to create collisions
with the next packet we may have to fragment.

When doing UFO integrity checking, we also select the
fragment id if it has not be set yet.   This is stored into
the skb_shinfo() thus allowing UFO to function correclty.

This patch also removes duplicate fragment id generation code
and moves ipv6_select_ident() into the header as it may be
used during GSO.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull infiniband reverts from Roland Dreier:
 "Last minute InfiniBand/RDMA changes for 3.19:

   - Revert IPoIB driver back to 3.18 state.  We had a number of fixes
     go into 3.19, but they introduced regressions.  We tried to get
     everything fixed up but ran out of time, so we'll try again for
     3.20.

   - Similarly, turn off the new "extended query port" verb.  Late in
     the cycle we realized the ABI is not quite right, and rather than
     freeze something in a rush and make a mistake, we'll take a bit
     more time and get it right in 3.20"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/core: Temporarily disable ex_query_device uverb
  Revert "IPoIB: Consolidate rtnl_lock tasks in workqueue"
  Revert "IPoIB: Make the carrier_on_task race aware"
  Revert "IPoIB: fix MCAST_FLAG_BUSY usage"
  Revert "IPoIB: fix mcast_dev_flush/mcast_restart_task race"
  Revert "IPoIB: change init sequence ordering"
  Revert "IPoIB: Use dedicated workqueues per interface"
  Revert "IPoIB: Make ipoib_mcast_stop_thread flush the workqueue"
  Revert "IPoIB: No longer use flush as a parameter"

Pull two fixes for md from Neil Brown:

 - Another live lock, needs backporting

 - work-around false positive with new warnings.

* tag 'md/3.19-fixes' of git://neil.brown.name/md:
  md/bitmap: fix a might_sleep() warning.
  md/raid5: fix another livelock caused by non-aligned writes.

Some AMD CS553x devices have read-only BARs because of a firmware or
hardware defect.  There's a workaround in quirk_cs5536_vsa(), but it no
longer works after 36e81648 ("PCI: Restore detection of read-only
BARs").  Prior to 36e81648, we filled in res->start; afterwards we
leave it zeroed out.  The quirk only updated the size, so the driver tried
to use a region starting at zero, which didn't work.

Expand quirk_cs5536_vsa() to read the base addresses from the BARs and
hard-code the sizes.

On Nix's system BAR 2's read-only value is 0x6200.  Prior to 36e81648,
we interpret that as a 512-byte BAR based on the lowest-order bit set.  Per
datasheet sec 5.6.1, that BAR (MFGPT) requires only 64 bytes; use that to
avoid clearing any address bits if a platform uses only 64-byte alignment.

[bhelgaas: changelog, reduce BAR 2 size to 64]
Fixes: 36e81648 ("PCI: Restore detection of read-only BARs")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=85991#c4
Link: http://support.amd.com/TechDocs/31506_cs5535_databook.pdf
Link: http://support.amd.com/TechDocs/33238G_cs5536_db.pdfReported-and-tested-by: Nix <nix@esperi.org.uk>
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v.2.6.27+

Pull final block layer fixes from Jens Axboe:
 "Unfortunately the hctx/ctx lifetime fix from last pull had some
  issues.  This pull request contains a revert of the problematic
  commit, and a proper rewrite of it.

  The rewrite has been tested by the users complaining about the
  regression, and it works fine now.  Additionally, I've run testing on
  all the blk-mq use cases for it and it passes.  So we should
  definitely get this into 3.19, to avoid regression for some cases"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: release mq's kobjects in blk_release_queue()
  Revert "blk-mq: fix hctx/ctx kobject use-after-free"

Pull gpio fixes from Linus Walleij:
 "Yet more GPIO fixes for the v3.19 series.

  There is a high bug-spot activity in GPIO this merge window, much due
  to Johan Hovolds spearheading into actually exercising the removal
  path for GPIO chips, something that was never really exercised before.

  The other two fixes are augmenting erroneous behaviours in two
  specific drivers for minor systems.

  Summary from signed tag:

   - Two fixes stabilizing that which was never stable before: removal
     of GPIO chips, now let's stop leaking memory.
   - Make sure OMAP IRQs are usable when the irqchip API is used
     orthogonally to the gpiochip API.
   - Provide a default GPIO base for the mcp23s08 driver"

* tag 'gpio-v3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: sysfs: fix memory leak in gpiod_sysfs_set_active_low
  gpio: sysfs: fix memory leak in gpiod_export_link
  gpio: mcp23s08: handle default gpio base
  gpio: omap: Fix bad device access with setup_irq()

Commit 5a77abf9 ("IB/core: Add support for extended query device caps")
added a new extended verb to query the capabilities of RDMA devices, but the
semantics of this verb are still under debate [1].

Don't expose this verb to userspace until the ABI is nailed down.

[1] [PATCH v1 0/5] IB/core: extended query device caps cleanup for v3.19
    http://www.spinics.net/lists/linux-rdma/msg22904.htmlSigned-off-by: Haggai Eran <haggaie@mellanox.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Revert commit 6c17ee44 (ACPI / LPSS: introduce a 'proxy' device
to power on LPSS for DMA), as it introduced registration and probe
ordering problems between devices on the LPSS that may lead to full
hard system hang on boot in some cases.

Commit e1a5848e ("ARM: 7924/1: mm: don't bother with reserved ttbr0
when running with LPAE") removed the use of the reserved TTBR0 value
for LPAE systems, since the ASID is held in the TTBR and can be updated
atomicly with the pgd of the next mm.

Unfortunately, this patch forgot to update flush_context, which
deliberately avoids marking the local active ASID as allocated, since we
used to switch via ASID zero and didn't need to allocate the ASID of
the previous mm. The side-effect of this is that we can allocate the
same ASID to the next mm and, between flushing the local TLB and updating
TTBR0, we can perform speculative TLB fills for userspace nG mappings
using the page table of the previous mm.

The consequence of this is that the next mm can erroneously hit some
mappings of the previous mm. Note that this was made significantly
harder to hit by a391263c ("ARM: 8203/1: mm: try to re-use old ASID
assignments following a rollover") but is still theoretically possible.

This patch fixes the problem by removing the code from flush_context
that forces the allocated ASID to zero for the local CPU. Many thanks
to the Broadcom guys for tracking this one down.

Fixes: e1a5848e ("ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE")

Cc: <stable@vger.kernel.org> # v3.14+
Reported-by: Raymond Ngun <rngun@broadcom.com>
Tested-by: Raymond Ngun <rngun@broadcom.com>
Reviewed-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

For TKT238285 hardware issue which may cause txfifo store data twice can only
be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl.

Fixes: f62caccd (spi: spi-imx: add DMA support)
Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

After commit e9d8b2c2 (xen-netback:
disable rogue vif in kthread context), a fatal (protocol) error would
leave the guest Rx thread spinning, wasting CPU time.  Commit
ecf08d2d (xen-netback: reintroduce
guest Rx stall detection) made this even worse by removing a
cond_resched() from this path.

Since a fatal error is non-recoverable, just allow the guest Rx thread
to exit.  This requires taking additional refs to the task so the
thread exiting early is handled safely.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reported-by: Julien Grall <julien.grall@linaro.org>
Tested-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>