- 24 Feb, 2020 27 commits
-
-
Niklas Söderlund authored
Add a init_cfg pad operation so that configurations allocated with v4l2_subdev_alloc_pad_config() are initialized. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Hans Verkuil authored
An attempt to get a BUTTON control returns EACCES, not EINVAL. BUTTON controls have V4L2_CTRL_FLAG_WRITE_ONLY set, and the documentation for that flag correctly says that getting a write-only control returns EACCES. It's the description of the BUTTON type that's wrong, so fix that so they are consistent. Signed-off-by:
-
Johan Hovold authored
The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on various user requests due to a malfunctioning (or malicious) device until the device is physically disconnected. The USB upper limit of five seconds per request should be more than enough. Fixes: f3d27f34 ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber") Fixes: c53a846c ("[media] usbtv: add video controls") Cc: stable <stable@vger.kernel.org> # 3.11 Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Lubomir Rintel <lkundrak@v3.sk> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Eugen Hristev authored
Add new file include/linux/atmel-isc-media.h to ATMEL ISC entry. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Eugen Hristev authored
This exposes the white balance configuration of the ISC as v4l2 controls into userspace. There are 8 controls available: 4 gain controls, sliders, for each of the BAYER components: R, B, GR, GB. These gains are multipliers for each component, in format unsigned 0:4:9 with a default value of 512 (1.0 multiplier). 4 offset controls, sliders, for each of the BAYER components: R, B, GR, GB. These offsets are added/substracted from each component, in format signed 1:12:0 with a default value of 0 (+/- 0) To expose this to userspace, added 8 custom controls, in an auto cluster. To summarize the functionality: The auto cluster switch is the auto white balance control, and it works like this: AWB == 1: autowhitebalance is on, the do_white_balance button is inactive, the gains/offsets are inactive, but volatile and readable. Thus, the results of the whitebalance algorithm are available to userspace to read at any time. AWB == 0: autowhitebalance is off, cluster is in manual mode, user can configure the gain/offsets directly. More than that, if the do_white_balance button is pressed, the driver will perform one-time-adjustment, (preferably with color checker card) and the userspace can read again the new values. With this feature, the userspace can save the coefficients and reinstall them for example after reboot or reprobing the driver. [hverkuil: fix checkpatch warning] [hverkuil: minor spacing adjustments in the functionality description] Signed-off-by:
-
Joel Stanley authored
Use the preferred form for GPL2+, and add IBM and Intel as the authors. The driver was initially upstreamed by Eddie from IBM, and has had major contributions from Jae at Intel. Signed-off-by:
Joel Stanley <joel@jms.id.au> Acked-by:
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
-
Joel Stanley authored
The aspeed video IP has some differences between SoC families. Currently the driver decides which registers to use at compile time, which means a single kernel can not be used between platforms. Switch to using runtime configuration of the registers that vary between SoC families. This is in preparation for upcoming ast2600 support. [hverkuil: replace ;; by ;] Signed-off-by:
-
Joel Stanley authored
Use the recently introduced function devm_platform_ioremap_resource to save a few lines of code. This makes the driver match common platform device probe patterns. Signed-off-by:
-
Jae Hyun Yoo authored
The AST2600 has Video Engine so add the compatible string into the document. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Peter Ujfalusi authored
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by:
-
Hirokazu Honda authored
The Hantro G1 decoder supports H.264 profiles from Baseline to High, with the exception of the Extended profile. Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the applications can query the driver for the list of supported profiles. Signed-off-by:
Hirokazu Honda <hiroh@chromium.org> Reviewed-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Peter Ujfalusi authored
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Julia Lawall authored
The hauppauge_955q_lgdt3306a_config structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Julia Lawall authored
The isif_config_defaults structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Julia Lawall authored
The anysee_tda18212_config and anysee_tda18212_config2 structures are only copied into other structures, so make them const. The opportunity for this change was found using Coccinelle. Signed-off-by:
-
Aditya Pakki authored
In saa7146_buffer_finish, the code for q->curr to be NULL is already present and asserting for NULL is unnecessary. This patch elimiates such a check. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Wolfram Sang authored
Use the new APIs instead of the deprecated ones. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Niklas Söderlund authored
When adding support for NV12 it was overlooked that the pixel format is only supported on some VIN channels. Fix this by adding a check to only accept NV12 on the supported channels 0, 1, 4, 5, 8, 9, 12 and 13. Signed-off-by:
-
Niklas Söderlund authored
Before extending the special pixel format handling turn the multiple if statements into a switch. Suggested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Ezequiel Garcia authored
The driver currently creates a broken topology, with a source-to-source link and a sink-to-sink link instead of two source-to-sink links. Reported-by:
Nicolas Dufresne <nicolas@ndufresne.ca> Cc: <stable@vger.kernel.org> # for v5.3 and up Signed-off-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Hans Verkuil authored
These are bits so to test if a pad is a sink you use & but not ==. It looks like the only reason this hasn't caused problems before is that media_get_pad_index() is currently only used with pads that do not set the MEDIA_PAD_FL_MUST_CONNECT flag. So a pad really had only the SINK or SOURCE flag set and nothing else. Signed-off-by:
-
Hans Verkuil authored
The topology that v4l2_m2m_register_media_controller() creates for a processing block actually created a source-to-source link and a sink-to-sink link instead of two source-to-sink links. Unfortunately v4l2-compliance never checked for such bad links, so this went unreported for quite some time. Signed-off-by:
-
Hans Verkuil authored
Only ARGB32-type pixelformat were assumed to have 4 components, which is wrong since RGB32-type pixelformats may have an alpha channel, so they should also assume 4 color components. The XRGB32-type pixelformats really have only 3 color components, but this complicated matters since that creates strides that are sometimes width * 3 and sometimes width * 4, and in fact this can result in buffer overflows. Keep things simple by just always processing all 4 color components. In the future we might want to optimize this again for the XRGB32-type pixelformats, but for now keep it simple and robust. Signed-off-by:
-
Hans Verkuil authored
The serio_close() call was moved to pulse8_cec_adap_free(), but that can be too late if that is called after the serio core pulled down the serio already, in which case you get a kernel oops. Keep it in the disconnect(). Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Fixes: 601282d6 ("media: pulse8-cec: use adap_free callback") Signed-off-by:
-
Hans Verkuil authored
If earlier in the connect() an error occurred, then pulse8_cec_adap_free was called by cec_delete_adapter, and that free function tried to cancel the ping_eeprom_work workqueue, but that workqueue hasn't been initialized yet, resulting in a kernel warning. Move the initialization of that workqueue up to where the other workqueues are initialized. Signed-off-by:
-
- 10 Feb, 2020 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - fix randconfig to generate a sane .config - rename hostprogs-y / always to hostprogs / always-y, which are more natual syntax. - optimize scripts/kallsyms - fix yes2modconfig and mod2yesconfig - make multiple directory targets ('make foo/ bar/') work * tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: make multiple directory targets work kconfig: Invalidate all symbols after changing to y or m. kallsyms: fix type of kallsyms_token_table[] scripts/kallsyms: change table to store (strcut sym_entry *) scripts/kallsyms: rename local variables in read_symbol() kbuild: rename hostprogs-y/always to hostprogs/always-y kbuild: fix the document to use extra-y for vmlinux.lds kconfig: fix broken dependency in randconfig-generated .config
-
- 09 Feb, 2020 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull new zonefs file system from Damien Le Moal: "Zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with native zoned block device support (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the sequential write constraint of zoned block devices to the user. As a result, zonefs is not a POSIX compliant file system. Its goal is to simplify the implementation of zoned block devices support in applications by replacing raw block device file accesses with a richer file based API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application while at the same time allowing the use of zoned block devices with various programming languages other than C. Zonefs IO management implementation uses the new iomap generic code. Zonefs has been successfully tested using a functional test suite (available with zonefs userland format tool on github) and a prototype implementation of LevelDB on top of zonefs" * tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Add documentation fs: New zonefs file system
-
Marc Zyngier authored
In order to allow the GICv4 code to link properly on 32bit ARM, make sure we don't use 64bit divisions when it isn't strictly necessary. Fixes: 4e6437f1 ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "13 cifs/smb3 patches, most from testing at the SMB3 plugfest this week: - Important fix for multichannel and for modefromsid mounts. - Two reconnect fixes - Addition of SMB3 change notify support - Backup tools fix - A few additional minor debug improvements (tracepoints and additional logging found useful during testing this week)" * tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6: smb3: Add defines for new information level, FileIdInformation smb3: print warning once if posix context returned on open smb3: add one more dynamic tracepoint missing from strict fsync path cifs: fix mode bits from dir listing when mounted with modefromsid cifs: fix channel signing cifs: add SMB3 change notification support cifs: make multichannel warning more visible cifs: fix soft mounts hanging in the reconnect code cifs: Add tracepoints for errors on flush or fsync cifs: log warning message (once) if out of disk space cifs: fail i/o on soft mounts if sessionsetup errors out smb3: fix problem with null cifs super block with previous patch SMB3: Backup intent flag missing from some more ops -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vboxfs from Al Viro: "This is the VirtualBox guest shared folder support by Hans de Goede, with fixups for fs_parse folded in to avoid bisection hazards from those API changes..." * 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Add VirtualBox guest shared folder (vboxsf) support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of fixes for X86: - Ensure that the PIT is set up when the local APIC is disable or configured in legacy mode. This is caused by an ordering issue introduced in the recent changes which skip PIT initialization when the TSC and APIC frequencies are already known. - Handle malformed SRAT tables during early ACPI parsing which caused an infinite loop anda boot hang. - Fix a long standing race in the affinity setting code which affects PCI devices with non-maskable MSI interrupts. The problem is caused by the non-atomic writes of the MSI address (destination APIC id) and data (vector) fields which the device uses to construct the MSI message. The non-atomic writes are mandated by PCI. If both fields change and the device raises an interrupt after writing address and before writing data, then the MSI block constructs a inconsistent message which causes interrupts to be lost and subsequent malfunction of the device. The fix is to redirect the interrupt to the new vector on the current CPU first and then switch it over to the new target CPU. This allows to observe an eventually raised interrupt in the transitional stage (old CPU, new vector) to be observed in the APIC IRR and retriggered on the new target CPU and the new vector. The potential spurious interrupts caused by this are harmless and can in the worst case expose a buggy driver (all handlers have to be able to deal with spurious interrupts as they can and do happen for various reasons). - Add the missing suspend/resume mechanism for the HYPERV hypercall page which prevents resume hibernation on HYPERV guests. This change got lost before the merge window. - Mask the IOAPIC before disabling the local APIC to prevent potentially stale IOAPIC remote IRR bits which cause stale interrupt lines after resume" * tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Mask IOAPIC entries when disabling the local APIC x86/hyperv: Suspend/resume the hypercall page for hibernation x86/apic/msi: Plug non-maskable MSI affinity race x86/boot: Handle malformed SRAT tables during early ACPI parsing x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull SMP fixes from Thomas Gleixner: "Two fixes for the SMP related functionality: - Make the UP version of smp_call_function_single() match SMP semantics when called for a not available CPU. Instead of emitting a warning and assuming that the function call target is CPU0, return a proper error code like the SMP version does. - Remove a superfluous check in smp_call_function_many_cond()" * tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp/up: Make smp_call_function_single() match SMP semantics smp: Remove superfluous cond_func check in smp_call_function_many_cond() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A set of fixes and improvements for the perf subsystem: Kernel fixes: - Install cgroup events to the correct CPU context to prevent a potential list double add - Prevent an integer underflow in the perf mlock accounting - Add a missing prototype for arch_perf_update_userpage() Tooling: - Add a missing unlock in the error path of maps__insert() in perf maps. - Fix the build with the latest libbfd - Fix the perf parser so it does not delete parse event terms, which caused a regression for using perf with the ARM CoreSight as the sink configuration was missing due to the deletion. - Fix the double free in the perf CPU map merging test case - Add the missing ustring support for the perf probe command" * tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf maps: Add missing unlock to maps__insert() error case perf probe: Add ustring support for perf probe command perf: Make perf able to build with latest libbfd perf test: Fix test case Merge cpu map perf parse: Copy string to perf_evsel_config_term perf parse: Refactor 'struct perf_evsel_config_term' kernel/events: Add a missing prototype for arch_perf_update_userpage() perf/cgroups: Install cgroup events to correct cpuctx perf/core: Fix mlock accounting in perf_mmap() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Two small fixes for the time(r) subsystem: - Handle a subtle race between the clocksource watchdog and a concurrent clocksource watchdog stop/start sequence correctly to prevent a timer double add bug. - Fix the file path for the core time namespace file" * tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Prevent double add_timer_on() for watchdog_timer MAINTAINERS: Correct path to time namespace source file -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull interrupt fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem: - Provision only ACPI enabled redistributors on GICv3 - Use the proper command colums when building the INVALL command for the GICv3-ITS - Ensure the allocation of the L2 vPE table for GICv4.1 - Correct the GICv4.1 VPROBASER programming so it uses the proper size - A set of small GICv4.1 tidy up patches - Configuration cleanup for C-SKY interrupt chip - Clarify the function documentation for irq_set_wake() to document that the wakeup functionality is orthogonal to the irq disable/enable mechanism" * tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors irqchip/gic-v3-its: Remove superfluous WARN_ON irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd() irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level irqchip/gic-v4.1: Set vpe_l1_base for all redistributors irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE genirq: Clarify that irq wake state is orthogonal to enable/disable irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL irqchip: Some Kconfig cleanup for C-SKY irqchip/gic-v3: Only provision redistributors that are enabled in ACPI -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fix from Thomas Gleixner: "A single fix for a EFI boot regression on X86 which was caused by the recent rework of the EFI memory map parsing. On systems with invalid memmap entries the cleanup function uses an value which cannot be relied on in this stage. Use the actual EFI memmap entry instead" * tag 'efi-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Fix boot regression on systems with invalid memmap entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull misc SCSI fixes from James Bottomley: "Five small patches, all in drivers or doc, which missed the initial pull request. The qla2xxx and megaraid_sas are actual fixes and the rest are spelling and doc changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: fix spelling mistake "initilized" -> "initialized" scsi: pm80xx: fix spelling mistake "to" -> "too" scsi: MAINTAINERS: ufs: remove pedrom.sousa@synopsys.com scsi: megaraid_sas: fixup MSIx interrupt setup during resume scsi: qla2xxx: Fix unbound NVME response length
-
