- 16 Jun, 2016 40 commits
-
-
Edward Cree authored
Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Rybchenko authored
If should be done after net_dev->hw_features initialization, to keep the feature there to be able to enable it later using ethtool. VLAN filtering is enforced and fixed if vPort requires usage of VLAN filters to receive tagged traffic. Signed-off-by:
-
Martin Habets authored
If it is not supported we simply disable the feature. For the feature to work we need firmware filter support for OUTER_VID + LOC_MAC and for OUTER_VID + LOC_MAC_IG. The low-latency firmware can match on OUTER_VID + LOC_MAC but not on OUTER_VID + LOC_MAC_IG. For the capture packet firmware it is the other way around. Only the full-feature variant can match on both combinations. Incorporates a fix by Andrew Rybchenko <Andrew.Rybchenko@oktetlabs.ru> in the net_dev->[hw_]features handling. Signed-off-by:
-
Andrew Rybchenko authored
Filter match flags are not unique criteria to be mapped to priority because of both unknown unicast and unknown multicast are mapped to LOC_MAC_IG. So, local MAC is required to map filter to priority. MCDI filter flags is unique criteria to find filter priority. Signed-off-by:
-
Edward Cree authored
Nearly every time we call efx_ef10_filter_remove_unsafe, we first check for EFX_EF10_FILTER_ID_INVALID, in which case we do nothing. So move that check into the function, simplifying all the call sites. Also, change the return type to void, since none of the callers check it. Signed-off-by:
-
Martin Habets authored
When trying to enslave an SFC interface to a bond the following BUG_ON was hit: kernel BUG [in ef10.c]! CPU: 0 PID: 4383 Comm: ifenslave Tainted: G ... Call Trace: efx_ef10_filter_add_vlan+0x121/0x180 [sfc] efx_ef10_filter_table_probe+0x2a2/0x4f0 [sfc] efx_ef10_set_mac_address+0x370/0x6d0 [sfc] efx_set_mac_address+0x7d/0x120 [sfc] dev_set_mac_address+0x43/0xa0 bond_enslave+0x337/0xea0 [bonding] This comes from function efx_ef10_filter_vlan_sync_rx_mode. To solve the bug we ensure the mac_lock is taken before calling efx_ef10_filter_add_vlan. But to avoid a priority inversion mac_lock must be taken before filter_sem. To satisfy these requirements we end up taking mac_lock in efx_ef10_vport_set_mac_address, efx_ef10_set_mac_address, efx_ef10_sriov_set_vf_vlan and efx_probe_filters. Signed-off-by:
-
Andrew Rybchenko authored
Supports HW VLAN filtering, en/disabled using ethtool. Signed-off-by:
-
Andrew Rybchenko authored
Right now it contains dummy VLAN entry with unspecified VID only. The entry is used for the case when HW VLAN filtering is not used. Signed-off-by:
-
Andrew Rybchenko authored
It is a step to support VLAN filtering in HW. Signed-off-by:
-
Andrew Rybchenko authored
These flags are built when address cache is updated. The information will be required when VLAN filtering is added and address cache is used without re-sync. Signed-off-by:
-
Andrew Rybchenko authored
It is a step to support VLAN filtering in HW. Until then, there is only one struct efx_ef10_filter_vlan per struct efx_ef10_filter_table, with no VLAN information yet. Signed-off-by:
-
Andrew Rybchenko authored
It is required to remove setting of filter IDs to invalid from multicast and unicast addresses caching functions. Add initialization to invalid when filter table is created. Add paranoid checks to track consistency. Signed-off-by:
-
Edward Cree authored
Based on a patch by Andrew Rybchenko <Andrew.Rybchenko@oktetlabs.ru> Signed-off-by:
-
Andrew Rybchenko authored
It allows to change set of fixed features on datapath reset. Signed-off-by:
-
Andrew Rybchenko authored
It is used for EF10 only and logically belongs to EF10 filter table state. It is OK that it is reset to false on filter table recreation since all filters are removed on destruction. Signed-off-by:
-
Andrew Rybchenko authored
It is useful to simplify features addition. Signed-off-by:
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160615' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Rework endpoint record handling Here's the next part of the AF_RXRPC rewrite. In this set I rework endpoint record handling. There are two types of endpoint record, local and peer. The local endpoint record is used as an anchor for the transport socket that AF_RXRPC uses (at the moment a UDP socket). Local endpoints can be shared between AF_RXRPC sockets under certain restricted circumstances. The peer endpoint is a record of the remote end. It is (or will be) used to keep track MTU and RTT values and, with these changes, is used to find the call(s) to abort when a network error occurs. The following significant changes are made: (1) The local endpoint event handling code is split out into its own file. (2) The local endpoint list bottom half-excluding spinlock is removed as things are arranged such that sk_user_data will not change whilst the transport socket callbacks are in progress. (3) Local endpoints can now only be shared if they have the same transport address (as before) and have a local service ID of 0 (ie. they're not listening for incoming calls). This prevents callbacks from a server to one process being picked up by another process. (4) Local endpoint destruction is now accomplished by the same work item as processes events, meaning that the destructor doesn't need to wait for the event processor. (5) Peer endpoints are now held in a hash table rather than a flat list. (6) Peer endpoints are now destroyed by RCU rather than by work item. (7) Peer endpoints are now differentiated by local endpoint and remote transport port in addition to remote transport address and transport type and family. This means that a firewall that excludes access between a particular local port and remote port won't cause calls to be aborted that use a different port pair. (8) Error report handling now no longer assumes that the source is always an IPv4 ICMP message from a UDP port and has assumptions that an ICMP message comes from an IPv4 socket removed. At some point IPv6 support will be added. (9) Peer endpoints rather than local endpoints are now the anchor point for distributing network error reports. (10) Both types of endpoint records are now disposed of as soon as all references to them are gone. There is less hanging around and once their usage counts hit zero, records can no longer be resurrected. ==================== Signed-off-by:
-
David S. Miller authored
Raghu Vatsavayi says: ==================== liquidio: Updates and Bug fixes Following are updates for liquidio bug fixes and driver support for new firmware interface. These updates are divided into smaller logical patches as mentioned by you. These set of nine patches should be applied in the following order as some of them depend on earlier patches in the list. ==================== Signed-off-by: -
Raghu Vatsavayi authored
Added support for new instruction header for octeon2/octeon3(ih) and corresponding changes. Signed-off-by:
Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by:
Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by:
Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by:
-
Raghu Vatsavayi authored
This patch decoupled the firmware side ifidx and host side interface number. It also has some minor name change for linkinfo sturct field. Signed-off-by:
-
Raghu Vatsavayi authored
This patch is for new driver/firmware control command structure (octnic_packet_params and octnic_cmd_setup ) and resultant code changes. Signed-off-by:
-
Raghu Vatsavayi authored
This patch is to refactor packet size calculations to support PTP enabled for 66xx and 68xx cards and also other cards that do not support PTP. Signed-off-by:
-
Raghu Vatsavayi authored
This patch is to add page based buffers for receive side descriptors of the driver and separate free routines for rx and tx buffers. Signed-off-by:
-
Raghu Vatsavayi authored
This patch is to allocate rx queue's memory based on numa node and also use page based buffers for rx traffic improvements. Signed-off-by:
-
Raghu Vatsavayi authored
This patch is to allocate and manage scatter gather lists per input queue(iq's) and remove queue's interdependence. Signed-off-by:
-
Raghu Vatsavayi authored
This patch is to allocate the input queues based on Numa node in tx path and queue mapping changes based on the mapping info provided by firmware. Signed-off-by:
-
Raghu Vatsavayi authored
This patch is to resolve the double free issue by checking proper return values from soft command. Signed-off-by:
-
Tom Herbert authored
The algorithm for checksum neutral mapping is incorrect. This problem was being hidden since we were previously always performing checksum offload on the translated addresses and only with IPv6 HW csum. Enabling an ILA router shows the issue. Corrected algorithm: old_loc is the original locator in the packet, new_loc is the value to overwrite with and is found in the lookup table. old_flag is the old flag value (zero of CSUM_NEUTRAL_FLAG) and new_flag is then (old_flag ^ CSUM_NEUTRAL_FLAG) & CSUM_NEUTRAL_FLAG. Need SUM(new_id + new_flag + diff) == SUM(old_id + old_flag) for checksum neutral translation. Solving for diff gives: diff = (old_id - new_id) + (old_flag - new_flag) compute_csum_diff8(new_id, old_id) gives old_id - new_id If old_flag is set old_flag - new_flag = old_flag = CSUM_NEUTRAL_FLAG Else old_flag - new_flag = -new_flag = ~CSUM_NEUTRAL_FLAG Tested: - Implemented a user space program that creates random addresses and random locators to overwrite. Compares the checksum over the address before and after translation (must always be equal) - Enabled ILA router and showed proper operation. Signed-off-by:Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Philip Prindeville authored
In the presence of firewalls which improperly block ICMP Unreachable (including Fragmentation Required) messages, Path MTU Discovery is prevented from working. A workaround is to handle IPv4 payloads opaquely, ignoring the DF bit--as is done for other payloads like AppleTalk--and doing transparent fragmentation and reassembly. Redux includes the enforcement of mutual exclusion between this feature and Path MTU Discovery as suggested by Alexander Duyck. Cc: Alexander Duyck <alexander.duyck@gmail.com> Reviewed-by:Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by:
-
David Ahern authored
Attempting to delete a VRF device with a socket bound to it can stall: unregister_netdevice: waiting for red to become free. Usage count = 1 The unregister is waiting for the dst to be released and with it references to the vrf device. Similar to dst_ifdown switch the dst dev to loopback on delete for all of the dst's for the vrf device and release the references to the vrf device. Fixes: 193125db ("net: Introduce VRF device driver") Fixes: 35402e31 ("net: Add IPv6 support to VRF device") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdmaDavid S. Miller authored
Mellanox shared code between RDMA and net-next trees This is Mellanox mlx5_core shared code for both net-next and RDMA trees for 4.8 kernel cycle.
-
Arnd Bergmann authored
The latest changes to the MDIO code introduced a false-positive warning with gcc-6 (possibly others): drivers/net/phy/mdio-mux.c: In function 'mdio_mux_init': drivers/net/phy/mdio-mux.c:188:3: error: 'parent_bus_node' may be used uninitialized in this function [-Werror=maybe-uninitialized] It's easy to avoid the warning by making sure the parent_bus_node is initialized in both cases at the start of the function, since the later 'of_node_put()' call is also valid for a NULL pointer argument. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: f20e6657 ("mdio: mux: Enhanced MDIO mux framework for integrated multiplexers") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Alexander Aring says: ==================== 6lowpan: introduce 6lowpan-nd David can you please pick-up this patch-serie for your net-next tree? Thanks in advance. This patch series introduces the ndisc ops callback structure to add different handling for IPv6 neighbour discovery cache functionality. It implements at first the two following use-cases: - 6CO handling as userspace option (For all 6LoWPAN layers, BTLE/802.15.4) [0] - short address handling for 802.15.4 6LoWPAN only [1] Since my last patch series, I completely changed the whole ndisc_ops callback structure to not replace the whole ndisc functionality at recv/send level of NS/NA/RS/RA which I send in my previous patch-series "6lowpan: introduce basic 6lowpan-nd". I changed it now to add different handling in a very low-level way of ndisc functionality. The ndisc_ops don't must be registered to dev->ndisc_ops anymore, if they are not set, then no additional ipv6 ndisc handling will be done. This patch series now introduce a complete handling of short address for 802.15.4 6LoWPAN in case of send/recv of NA/NS/RS and RA. In case of RA (receive only) and PIO we also need a second prefix + short-address based address. This callback structure can be used later (I hope) for RFC 6775 [0]. This RFC defines some new option fields and messages for 6LoWPAN-ND. This patch series does not implement RFC 6775 (except we decide now to handle 6CO in userspace). Additional we can use the current ops for parse/fill ndisc options for kernel handled ndisc messages to add 6CIO, see [2]. I tested RA/NS/NA/RS messages with short address which seems to work, what I didn't test is the redirect messages since I don't know how to generate them. The short address for redirect messages are also some special case here, because the short address by a L3 target address lookuped by neighbour cache need to be added. btw: According to [3] sending redirect messages should be also disabled by default on 6lowpan interfaces, but can be activated afterwards. This is maybe something for the ipv6_devconf structure. There is a "accept_redirects" but no "disable_redirects". - Alex [0] https://tools.ietf.org/html/rfc6775 [1] https://tools.ietf.org/html/rfc4944#section-8 [2] https://tools.ietf.org/html/rfc7400 changes since v3: - add acked-by and reviewed-by tags - fix url references in cover-letter - add cover-letter that this patch series is okay to go through net-next tree changes since RFC: - add lowlevel functions __ndisc_opt_addr_space, __ndisc_opt_addr_data and __ndisc_fill_addr_option for corresponding functions which doesn't requires net_device argument. - move ndisc_ops e.g. ndisc_ops_fill_addr_option function call into the corresponding device argument function ndisc_fill_addr_option. (Introduced a special static inline function for redirect handling). - fix error handling in addrconf_prefix_rcv_add_addr. (Please see, introduce new API handling that second address registration (in case of 802.15.4 6LoWPAN) will still be notified if failed, because dev->addr was successful. - add ieee802154 sub-directory in short address entry for 6lowpan UAPI. - add lowpan_802154_is_valid_src_short_addr, because 802.15.4 6lowpan defines the first bit as multicast (don't know how this can be working at the end, because some hardware addresses will handle such addresses in L2 as unicast. See: https://www.iana.org/assignments/_6lowpan-parameters/_6lowpan-parameters.xhtml#_6lowpan-parameters-2 changes since v2: - Introduce ndisc_ops to have our own implementation for dealing with NS/NA which allows also to support RFC6775 (e.g. ARO). - add handling for handling 6CO as userspace option for RA messages in case of 6LoWPAN interfaces. - change lowpan_is_ll to check on linklayer type only. - added some reviewed-by's. - move short addr slaac to net/6lowpan instead ipv6 handling. - add handling for context based address compression in case for short address as link-layer address. - change strategy to use short address, a short address will always be used when it's available. - Handle override flag in NA messages to update short address information or not. ==================== Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Alexander Aring authored
This patch adds necessary handling for use the short address for 802.15.4 6lowpan. It contains support for IPHC address compression and new matching algorithmn to decide which link layer address will be used for 802.15.4 frame. Reviewed-by:
Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by:
Alexander Aring <aar@pengutronix.de> Signed-off-by:
-
Alexander Aring authored
In case of sending RA messages we need some way to get the short address from an 802.15.4 6LoWPAN interface. This patch will add a temporary debugfs entry for experimental userspace api. Reviewed-by:
-
Alexander Aring authored
This patch introduce different 6lowpan handling for receive and transmit NS/NA messages for the ipv6 neighbour discovery. The first use-case is for supporting 802.15.4 short addresses inside the option fields and handling for RFC6775 6CO option field as userspace option. Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Reviewed-by:
-
Alexander Aring authored
This patch exports some neighbour discovery functions which can be used by 6lowpan neighbour discovery ops functionality then. Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by:
-
Alexander Aring authored
This patch introduces neighbour discovery ops callback structure. The idea is to separate the handling for 6LoWPAN into the 6lowpan module. These callback offers 6lowpan different handling, such as 802.15.4 short address handling or RFC6775 (Neighbor Discovery Optimization for IPv6 over 6LoWPANs). Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by:
-
Alexander Aring authored
This patch moves the functionality to add a RA PIO prefix generated address in an own function. This move prepares to add a hook for adding a second address for a second link-layer address. E.g. short address for 802.15.4 6LoWPAN. Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Reviewed-by:
-
Alexander Aring authored
This patch adds __ndisc_fill_addr_option as low-level function for ndisc_fill_addr_option which doesn't depend on net_device parameter. Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by:
-
