Merge tag 'irqchip-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

  - Drop an unused private data field in the AIC driver

  - Various fixes to the realtek-rtl driver

  - Make the GICv3 ITS driver compile again in !SMP configurations

  - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec

  - Yet another kfree/bitmap_free conversion

  - Various DT updates (Renesas, SiFive)

Link: https://lore.kernel.org/r/20220128174217.517041-1-maz@kernel.org

To improve human readability and enable automatic validation, the tuples
in "interrupts-extended" properties should be grouped using angle
brackets.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/211705e74a2ce77de43d036c5dea032484119bf7.1643360419.git.geert@linux-m68k.org

The number of interrupts lacks an upper bound, thus assuming one,
causing properly grouped "interrupts-extended" properties to be flagged
as an error by "make dtbs_check".

Fix this by adding the missing "maxItems", using the architectural
maximum of 15872 interrupts.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/f73a0aead89e1426b146c4c64f797aa035868bf0.1643360419.git.geert@linux-m68k.org

Document support for the Interrupt Controller for External Devices
(INT-EC) in the Renesas R-Car V3U (r8a779a0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/85b246cc0792663c72c1bb12a8576bd23d2299d3.1643200256.git.geert+renesas@glider.be

A recent bug report outlined that the way GICv4.1 is handled across
kexec is pretty bad. We can end-up in a situation where ITSs share
memory (this is the case when SVPET==1) and reprogram the base
registers, creating a situation where ITSs that are part of a given
affinity group see different pointers. Which is illegal. Boo.

In order to restore some sanity, reset the BASERn registers to 0
*before* probing any ITS. Although this isn't optimised at all,
this is only a once-per-boot cost, which shouldn't show up on
anyone's radar.

Cc: Jay Chen <jkchen@linux.alibaba.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20211216190315.GA14220@lpieralisi
Link: https://lore.kernel.org/r/20220124133809.1291195-1-maz@kernel.org

Commit 835f442f ("irqchip/gic-v3-its: Limit memreserve cpuhp state
lifetime") added a reference to cpus_booted_once_mask, which does not
exist on !SMP builds, breaking the build for such configurations.

Given the intent of the check, short circuit it to always pass.

Cc: Valentin Schneider <valentin.schneider@arm.com>
Fixes: 835f442f ("irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220122151614.133766-1-ardb@kernel.org

When the core MSI allocation fails, then the PCI/MSI code uses an already
freed MSI descriptor to unmask the MSI mask register in order to bring it back
into reset state.

Remove MSI_FLAG_FREE_MSI_DESCS from the PCI/MSI irqdomain flags and let the
PCI/MSI code free the MSI descriptors after usage.

Fixes: 0f62d941 ("genirq/msi: Provide msi_domain_alloc/free_irqs_descs_locked()")
Reported-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tong Zhang <ztong0001@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/87r1938vbn.ffs@tglx

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've tried to address some performance issues in
  f2fs_checkpoint and direct IO flows. Also, there was a work to enhance
  the page cache management used for compression. Other than them, we've
  done typical work including sysfs, code clean-ups, tracepoint, sanity
  check, in addition to bug fixes on corner cases.

  Enhancements:
   - use iomap for direct IO
   - try to avoid lock contention to improve f2fs_ckpt speed
   - avoid unnecessary memory allocation in compression flow
   - POSIX_FADV_DONTNEED drops the page cache containing compression
     pages
   - add some sysfs entries (gc_urgent_high_remaining, pending_discard)

  Bug fixes:
   - try not to expose unwritten blocks to user by DIO (this was added
     to avoid merge conflict; another patch is coming to address other
     missing case)
   - relax minor error condition for file pinning feature used in
     Android OTA
   - fix potential deadlock case in compression flow
   - should not truncate any block on pinned file

  In addition, we've done some code clean-ups and tracepoint/sanity
  check improvement"

* tag 'f2fs-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
  f2fs: do not allow partial truncation on pinned file
  f2fs: remove redunant invalidate compress pages
  f2fs: Simplify bool conversion
  f2fs: don't drop compressed page cache in .{invalidate,release}page
  f2fs: fix to reserve space for IO align feature
  f2fs: fix to check available space of CP area correctly in update_ckpt_flags()
  f2fs: support fault injection to f2fs_trylock_op()
  f2fs: clean up __find_inline_xattr() with __find_xattr()
  f2fs: fix to do sanity check on last xattr entry in __f2fs_setxattr()
  f2fs: do not bother checkpoint by f2fs_get_node_info
  f2fs: avoid down_write on nat_tree_lock during checkpoint
  f2fs: compress: fix potential deadlock of compress file
  f2fs: avoid EINVAL by SBI_NEED_FSCK when pinning a file
  f2fs: add gc_urgent_high_remaining sysfs node
  f2fs: fix to do sanity check in is_alive()
  f2fs: fix to avoid panic in is_alive() if metadata is inconsistent
  f2fs: fix to do sanity check on inode type during garbage collection
  f2fs: avoid duplicate call of mark_inode_dirty
  f2fs: show number of pending discard commands
  f2fs: support POSIX_FADV_DONTNEED drop compressed page cache
  ...

Pull tracing fix from Steven Rostedt:
 "tracing/scripts: Possible uninitialized variable

  The 0day bot discovered a possible uninitialized path in the scripts
  that sort the mcount sections at build time. Just needed to initialize
  that variable"

* tag 'trace-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  script/sorttable: Fix some initialization problems

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the DA9063 as used on the HiFive Unmatched.

 - Support for relative extables, which puts us in line with other
   architectures and save some space in vmlinux.

 - A handful of kexec fixes/improvements, including the ability to run
   crash kernels from PCI-addressable memory on the HiFive Unmatched.

 - Support for the SBI SRST extension, which allows systems that do not
   have an explicit driver in Linux to reboot.

 - A handful of fixes and cleanups, including to the defconfigs and
   device trees.

* tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
  RISC-V: Use SBI SRST extension when available
  riscv: mm: fix wrong phys_ram_base value for RV64
  RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n
  riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign
  riscv: errata: alternative: mark vendor_patch_func __initdata
  riscv: head: make secondary_start_common() static
  riscv: remove cpu_stop()
  riscv: try to allocate crashkern region from 32bit addressible memory
  riscv: use hart id instead of cpu id on machine_kexec
  riscv: Don't use va_pa_offset on kdump
  riscv: dts: sifive: fu540-c000: Fix PLIC node
  riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values
  riscv: dts: sifive: Group tuples in register properties
  riscv: dts: sifive: Group tuples in interrupt properties
  riscv: dts: microchip: mpfs: Group tuples in interrupt properties
  riscv: dts: microchip: mpfs: Fix clock controller node
  riscv: dts: microchip: mpfs: Fix reference clock node
  riscv: dts: microchip: mpfs: Fix PLIC node
  riscv: dts: microchip: mpfs: Drop empty chosen node
  riscv: dts: canaan: Group tuples in interrupt properties
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Add new kconfig target 'make mod2noconfig', which will be useful to
   speed up the build and test iteration.

 - Raise the minimum supported version of LLVM to 11.0.0

 - Refactor certs/Makefile

 - Change the format of include/config/auto.conf to stop double-quoting
   string type CONFIG options.

 - Fix ARCH=sh builds in dash

 - Separate compression macros for general purposes (cmd_bzip2 etc.) and
   the ones for decompressors (cmd_bzip2_with_size etc.)

 - Misc Makefile cleanups

* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: add cmd_file_size
  arch: decompressor: remove useless vmlinux.bin.all-y
  kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
  kbuild: drop $(size_append) from cmd_zstd
  sh: rename suffix-y to suffix_y
  doc: kbuild: fix default in `imply` table
  microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
  certs: move scripts/extract-cert to certs/
  kbuild: do not quote string values in include/config/auto.conf
  kbuild: do not include include/config/auto.conf from shell scripts
  certs: simplify $(srctree)/ handling and remove config_filename macro
  kbuild: stop using config_filename in scripts/Makefile.modsign
  certs: remove misleading comments about GCC PR
  certs: refactor file cleaning
  certs: remove unneeded -I$(srctree) option for system_certificates.o
  certs: unify duplicated cmd_extract_certs and improve the log
  certs: use $< and $@ to simplify the key generation rule
  kbuild: remove headers_check stub
  kbuild: move headers_check.pl to usr/include/
  certs: use if_changed to re-generate the key when the key type is changed
  ...

Merge branch 'random-5.17-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random

Pull random number generator fixes from Jason Donenfeld:

 - Some Kconfig changes resulted in BIG_KEYS being unselectable, which
   Justin sent a patch to fix.

 - Geert pointed out that moving to BLAKE2s bloated vmlinux on little
   machines, like m68k, so we now compensate for this.

 - Numerous style and house cleaning fixes, meant to have a cleaner base
   for future changes.

* 'random-5.17-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: simplify arithmetic function flow in account()
  random: selectively clang-format where it makes sense
  random: access input_pool_data directly rather than through pointer
  random: cleanup fractional entropy shift constants
  random: prepend remaining pool constants with POOL_
  random: de-duplicate INPUT_POOL constants
  random: remove unused OUTPUT_POOL constants
  random: rather than entropy_store abstraction, use global
  random: remove unused extract_entropy() reserved argument
  random: remove incomplete last_data logic
  random: cleanup integer types
  random: cleanup poolinfo abstraction
  random: fix typo in comments
  lib/crypto: sha1: re-roll loops to reduce code size
  lib/crypto: blake2s: move hmac construction into wireguard
  lib/crypto: add prompts back to crypto libraries

Pull hwspinlock updates from Bjorn Andersson:
 "This contains a change to the stm32 hwspinlock driver to ensure that
  the hardware is operational even without CONFIG_PM"

* tag 'hwlock-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  hwspinlock: stm32: enable clock at probe

elf_mcount_loc and mcount_sort_thread definitions are not
initialized immediately within the function, which can cause
the judgment logic to use uninitialized values when the
initialization logic of subsequent code fails.

Link: https://lkml.kernel.org/r/20211212113358.34208-2-yinan@linux.alibaba.com
Link: https://lkml.kernel.org/r/20220118065241.42364-1-yinan@linux.alibaba.com

Fixes: 72b3942a ("scripts: ftrace - move the sort-processing in ftrace_init")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Now that have_bytes is never modified, we can simplify this function.
First, we move the check for negative entropy_count to be first. That
ensures that subsequent reads of this will be non-negative. Then,
have_bytes and ibytes can be folded into their one use site in the
min_t() function.
Suggested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

This is an old driver that has seen a lot of different eras of kernel
coding style. In an effort to make it easier to code for, unify the
coding style around the current norm, by accepting some of -- but
certainly not all of -- the suggestions from clang-format. This should
remove ambiguity in coding style, especially with regards to spacing,
when code is being changed or amended. Consequently it also makes code
review easier on the eyes, following one uniform style rather than
several.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

This gets rid of another abstraction we no longer need. It would be nice
if we could instead make pool an array rather than a pointer, but the
latent entropy plugin won't be able to do its magic in that case. So
instead we put all accesses to the input pool's actual data through the
input_pool_data array directly.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

The entropy estimator is calculated in terms of 1/8 bits, which means
there are various constants where things are shifted by 3. Move these
into our pool info enum with the other relevant constants. While we're
at it, move an English assertion about sizes into a proper BUILD_BUG_ON
so that the compiler can ensure this invariant.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

The other pool constants are prepended with POOL_, but not these last
ones. Rename them. This will then let us move them into the enum in the
following commit.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

We already had the POOL_* constants, so deduplicate the older INPUT_POOL
ones. As well, fold EXTRACT_SIZE into the poolinfo enum, since it's
related.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

We no longer have an output pool. Rather, we have just a wakeup bits
threshold for /dev/random reads, presumably so that processes don't
hang. This value, random_write_wakeup_bits, is configurable anyway. So
all the no longer usefully named OUTPUT_POOL constants were doing was
setting a reasonable default for random_write_wakeup_bits. This commit
gets rid of the constants and just puts it all in the default value of
random_write_wakeup_bits.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Originally, the RNG used several pools, so having things abstracted out
over a generic entropy_store object made sense. These days, there's only
one input pool, and then an uneven mix of usage via the abstraction and
usage via &input_pool. Rather than this uneasy mixture, just get rid of
the abstraction entirely and have things always use the global. This
simplifies the code and makes reading it a bit easier.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

This argument is always set to zero, as a result of us not caring about
keeping a certain amount reserved in the pool these days. So just remove
it and cleanup the function signatures.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

There were a few things added under the "if (fips_enabled)" banner,
which never really got completed, and the FIPS people anyway are
choosing a different direction. Rather than keep around this halfbaked
code, get rid of it so that we can focus on a single design of the RNG
rather than two designs.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Rather than using the userspace type, __uXX, switch to using uXX. And
rather than using variously chosen `char *` or `unsigned char *`, use
`u8 *` uniformly for things that aren't strings, in the case where we
are doing byte-by-byte traversal.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Now that we're only using one polynomial, we can cleanup its
representation into constants, instead of passing around pointers
dynamically to select different polynomials. This improves the codegen
and makes the code a bit more straightforward.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

s/or/for
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

With SHA-1 no longer being used for anything performance oriented, and
also soon to be phased out entirely, we can make up for the space added
by unrolled BLAKE2s by simply re-rolling SHA-1. Since SHA-1 is so much
more complex, re-rolling it more or less takes care of the code size
added by BLAKE2s. And eventually, hopefully we'll see SHA-1 removed
entirely from most small kernel builds.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Basically nobody should use blake2s in an HMAC construction; it already
has a keyed variant. But unfortunately for historical reasons, Noise,
used by WireGuard, uses HKDF quite strictly, which means we have to use
this. Because this really shouldn't be used by others, this commit moves
it into wireguard's noise.c locally, so that kernels that aren't using
WireGuard don't get this superfluous code baked in. On m68k systems,
this shaves off ~314 bytes.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Commit 6048fdcc ("lib/crypto: blake2s: include as built-in") took
away a number of prompt texts from other crypto libraries. This makes
values flip from built-in to module when oldconfig runs, and causes
problems when these crypto libs need to be built in for thingslike
BIG_KEYS.

Fixes: 6048fdcc ("lib/crypto: blake2s: include as built-in")
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
[Jason: - moved menu into submenu of lib/ instead of root menu
        - fixed chacha sub-dependencies for CONFIG_CRYPTO]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Pull dmaengine updates from Vinod Koul:
 "A bunch of new support and few updates to drivers:

  New support:
   - DMA_MEMCPY_SG support is bought back as we have a user in Xilinx
     driver
   - Support for TI J721S2 SoC in k3-udma driver
   - Support for Ingenic MDMA and BDMA in the JZ4760
   - Support for Renesas r8a779f0 dmac

  Updates:
   - We are finally getting rid of slave_id, so this brings in the
     changes across tree for that
   - updates for idxd driver
   - at_xdmac driver cleanup"

* tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits)
  dt-bindings: dma-controller: Split interrupt fields in example
  dmaengine: pch_dma: Remove usage of the deprecated "pci-dma-compat.h" API
  dmaengine: at_xdmac: Fix race over irq_status
  dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_tasklet()
  dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
  dmaengine: at_xdmac: Fix lld view setting
  dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work()
  dmaengine: at_xdmac: Fix concurrency over xfers_list
  dmaengine: at_xdmac: Move the free desc to the tail of the desc list
  dmaengine: at_xdmac: Fix race for the tx desc callback
  dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie
  dmaengine: at_xdmac: Print debug message after realeasing the lock
  dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
  dmaengine: at_xdmac: Don't start transactions at tx_submit level
  dmaengine: idxd: deprecate token sysfs attributes for read buffers
  dmaengine: idxd: change bandwidth token to read buffers
  dmaengine: idxd: fix wq settings post wq disable
  dmaengine: idxd: change MSIX allocation based on per wq activation
  dmaengine: idxd: fix descriptor flushing locking
  dmaengine: idxd: embed irq_entry in idxd_wq struct
  ...

Pull ATA updates from Damien Le Moal:
 "A larger than usual set of changes for this cycle. The bulk of the
  changes are part of a rework of libata messages and debugging features
  from Hannes. In more detail, the changes are as follows.

   - Small code cleanups in the pata_ali driver (unnecessary variable
     initialization and simplified return statement, from Jason and
     Colin.

   - Switch to using struct_group() in the sata_fsl driver, from Kees.

   - Convert many sysfs attribute show functions to use sysfs_emit()
     instead of snprintf(), from me.

   - sata_dwc_460ex driver code cleanups, from Andy.

   - Improve DMA setup and remove superfluous error message in
     libahci_platform, from Andy

   - A small code cleanup in libata to use min() instead of open coding
     test, from Changcheng.

   - Rework of libata messages from Hannes. This is especially focused
     on replacing compile time defined debugging messages (DPRINTK() and
     VPRINTK()) with regular dynamic debugging messages (pr_debug()) and
     traceipoint events. Both libata-core and many drivers are updated
     to have a consistent debugging level control for all drivers.

   - Extend compile test support to as many drivers as possible in ATA
     Kconfig to improve compile test coverage, from me.

   - Fixes to avoid compile time warnings (W=1) and sparse warnings in
     sata_fsl and ahci_xgene drivers, from me.

   - Fix the interface of the read_id() port operation method to clarify
     that the data buffer passed as an argument is little endian. This
     avoids sparse warnings in the pata_netcell, pata_it821x,
     ahci_xgene, ahci_cevaxi and ahci_brcm drivers. From me.

   - Small code cleanup in the pata_octeon_cf driver, from Minghao.

   - Improved IRQ configuration code in pata_of_platform, from Lad.

   - Simplified implementation of __ata_scsi_queuecmd(), from Wenchao.

   - Debounce delay flag renaming, from Paul.

   - Add support for AMD A85 FCH (Hudson D4) AHCI adapters, from Paul"

* tag 'ata-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (106 commits)
  ata: pata_ali: remove redundant return statement
  ata: ahci: Add support for AMD A85 FCH (Hudson D4)
  ata: libata: Rename link flag ATA_LFLAG_NO_DB_DELAY
  ata: libata-scsi: simplify __ata_scsi_queuecmd()
  ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
  ata: pata_samsung_cf: add compile test support
  ata: pata_pxa: add compile test support
  ata: pata_imx: add compile test support
  ata: pata_ftide010: add compile test support
  ata: pata_cs5535: add compile test support
  ata: pata_octeon_cf: remove redundant val variable
  ata: fix read_id() ata port operation interface
  ata: ahci_xgene: use correct type for port mmio address
  ata: sata_fsl: fix cmdhdr_tbl_entry and prde struct definitions
  ata: sata_fsl: fix scsi host initialization
  ata: pata_bk3710: add compile test support
  ata: ahci_seattle: add compile test support
  ata: ahci_xgene: add compile test support
  ata: ahci_tegra: add compile test support
  ata: ahci_sunxi: add compile test support
  ...

Pull virtio updates from Michael Tsirkin:
 "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.

   - partial support for < MAX_ORDER - 1 granularity for virtio-mem

   - driver_override for vdpa

   - sysfs ABI documentation for vdpa

   - multiqueue config support for mlx5 vdpa

   - and misc fixes, cleanups"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
  vdpa/mlx5: Fix tracking of current number of VQs
  vdpa/mlx5: Fix is_index_valid() to refer to features
  vdpa: Protect vdpa reset with cf_mutex
  vdpa: Avoid taking cf_mutex lock on get status
  vdpa/vdpa_sim_net: Report max device capabilities
  vdpa: Use BIT_ULL for bit operations
  vdpa/vdpa_sim: Configure max supported virtqueues
  vdpa/mlx5: Report max device capabilities
  vdpa: Support reporting max device capabilities
  vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
  vdpa: Add support for returning device configuration information
  vdpa/mlx5: Support configuring max data virtqueue
  vdpa/mlx5: Fix config_attr_mask assignment
  vdpa: Allow to configure max data virtqueues
  vdpa: Read device configuration only if FEATURES_OK
  vdpa: Sync calls set/get config/status with cf_mutex
  vdpa/mlx5: Distribute RX virtqueues in RQT object
  vdpa: Provide interface to read driver features
  vdpa: clean up get_config_size ret value handling
  virtio_ring: mark ring unused on error
  ...

Pull remoteproc updates from Bjorn Andersson:
 "This introduces support for controlling the Cortex R7 co-processor in
  Renesas Gen3, support for R5F clusters and C71x DSPs on TI J721S2 and
  compute, audio and modem subsystems on Qualcomm SM6350.

  It fixes a couple of sparse errors related to memcpy_to/fromio and
  corrects the kerneldoc spelling of "Return:".

  The stm32 driver no longer attempts to communicate with the remote
  after the firmware has crashed"

* tag 'rproc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
  remoteproc: stm32: Improve crash recovery time
  remoteproc: rcar_rproc: Remove trailing semicolon
  remoteproc: rcar_rproc: Fix pm_runtime_get_sync error check
  remoteproc: qcom: pas: Add SM6350 CDSP support
  remoteproc: qcom: pas: Add SM6350 ADSP support
  remoteproc: qcom: pas: Add SM6350 MPSS support
  dt-bindings: remoteproc: qcom: pas: Add SM6350 adsp, cdsp & mpss
  remoteproc: qcom: pas: Add missing power-domain "mxc" for CDSP
  remoteproc: imx_rproc: correct firmware reload
  remoteproc: qcom: pil_info: Don't memcpy_toio more than is provided
  remoteproc: Add Renesas rcar driver
  dt-bindings: remoteproc: Add Renesas R-Car
  remoteproc: Fix remaining wrong return formatting in documentation
  MAINTAINERS: Removing Ohad from remoteproc/rpmsg maintenance
  remoteproc: ingenic: Request IRQ disabled
  remoteproc: k3-r5: Extend support for R5F clusters on J721S2 SoCs
  remoteproc: k3-dsp: Extend support for C71x DSPs on J721S2 SoCs
  dt-bindings: remoteproc: k3-dsp: Update bindings for J721S2 SoCs
  dt-bindings: remoteproc: k3-r5f: Update bindings for J721S2 SoCs
  remoteproc: coredump: Correct argument 2 type for memcpy_fromio
  ...

Pull rpmsg updates from Bjorn Andersson:
 "This adds pr_fmt for the rpmsg_char driver, fixes error handling in
  rpmsg_dev_probe() and corrects the spelling of "Return:" in various
  places, in order to fix kerneldoc"

* tag 'rpmsg-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: core: Clean up resources on announce_create failure.
  rpmsg: Fix documentation return formatting
  rpmsg: char: Add pr_fmt() to prefix messages

The "PAGE_SIZE - 2 - size" calculation in legacy_parse_param() is an
unsigned type so a large value of "size" results in a high positive
value instead of a negative value as expected.  Fix this by getting rid
of the subtraction.
Signed-off-by: Jamie Hill-Daniel <jamie@hill-daniel.co.uk>
Signed-off-by: William Liu <willsroot@protonmail.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more power management updates from Rafael Wysocki:
 "This is a continuation of the rework of device power management macros
  used for declaring device power management callbacks (Paul Cercueil)"

* tag 'pm-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  iio: pressure: bmp280: Use new PM macros
  PM: runtime: Add EXPORT[_GPL]_RUNTIME_DEV_PM_OPS macros
  PM: runtime: Add DEFINE_RUNTIME_DEV_PM_OPS() macro
  PM: core: Add EXPORT[_GPL]_SIMPLE_DEV_PM_OPS macros
  PM: core: Remove static qualifier in DEFINE_SIMPLE_DEV_PM_OPS macro
  PM: core: Remove DEFINE_UNIVERSAL_DEV_PM_OPS() macro

Pull more ACPI updates from Rafael Wysocki:
 "The most significant item here is the Platform Firmware Runtime Update
  and Telemetry (PFRUT) support designed to allow certain pieces of the
  platform firmware to be updated on the fly, among other things.

  Also important is the e820 handling change on x86 that should work
  around PCI BAR allocation issues on some systems shipping since 2019.

  The rest is just a handful of assorted fixes and cleanups on top of
  the ACPI material merged previously.

  Specifics:

   - Add support for the the Platform Firmware Runtime Update and
     Telemetry (PFRUT) interface based on ACPI to allow certain pieces
     of the platform firmware to be updated without restarting the
     system and to provide a mechanism for collecting platform firmware
     telemetry data (Chen Yu, Dan Carpenter, Yang Yingliang).

   - Ignore E820 reservations covering PCI host bridge windows on
     sufficiently recent x86 systems to avoid issues with allocating PCI
     BARs on systems where the E820 reservations cover the entire PCI
     host bridge memory window returned by the _CRS object in the
     system's ACPI tables (Hans de Goede).

   - Fix and clean up acpi_scan_init() (Rafael Wysocki).

   - Add more sanity checking to ACPI SPCR tables parsing (Mark
     Langsdorf).

   - Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang).

   - Drop unnecessary "static" from the ACPI PCC address space handling
     driver added recently (kernel test robot)"

* tag 'acpi-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PCC: pcc_ctx can be static
  ACPI: scan: Rename label in acpi_scan_init()
  ACPI: scan: Simplify initialization of power and sleep buttons
  ACPI: scan: Change acpi_scan_init() return value type to void
  ACPI: SPCR: check if table->serial_port.access_width is too wide
  ACPI: APD: Check for NULL pointer after calling devm_ioremap()
  x86/PCI: Ignore E820 reservations for bridge windows on newer systems
  ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl()
  ACPI: pfr_update: Fix return value check in pfru_write()
  ACPI: tools: Introduce utility for firmware updates/telemetry
  ACPI: Introduce Platform Firmware Runtime Telemetry driver
  ACPI: Introduce Platform Firmware Runtime Update device driver
  efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures

Pull more slab updates from Vlastimil Babka:
 "Finish the conversion to struct slab by removing slab-specific fields
  from struct page.

  The first slab update (see merge commit ca1a46d6) did most of the
  conversion, but there was also series in iommu tree removing the
  iommu's usage of struct page 'freelist' field, blocking the final
  struct page cleanup.

  Now that the iommu changes have been merged, we can finish the job"

* tag 'slab-for-5.17-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm: Remove slab from struct page

Pull ARC fixes from Vineet Gupta:
 "Nothing too exciting for now"

* tag 'arc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  arc: use swap() to make code cleaner
  arc: perf: Move static structs to where they're really used
  ARC: perf: fix misleading comment about pmu vs counter stop
  arc: Replace lkml.org links with lore
  ARC: perf: Remove redundant initialization of variable idx
  ARC: thread_info.h: correct two typos in a comment