Pull nfsd updates from Bruce Fields:
 "The one new feature this time, from Anna Schumaker, is READ_PLUS,
  which has the same arguments as READ but allows the server to return
  an array of data and hole extents.

  Otherwise it's a lot of cleanup and bugfixes"

* tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits)
  NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy
  SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
  sunrpc: raise kernel RPC channel buffer size
  svcrdma: fix bounce buffers for unaligned offsets and multiple pages
  nfsd: remove unneeded break
  net/sunrpc: Fix return value for sysctl sunrpc.transports
  NFSD: Encode a full READ_PLUS reply
  NFSD: Return both a hole and a data segment
  NFSD: Add READ_PLUS hole segment encoding
  NFSD: Add READ_PLUS data support
  NFSD: Hoist status code encoding into XDR encoder functions
  NFSD: Map nfserr_wrongsec outside of nfsd_dispatch
  NFSD: Remove the RETURN_STATUS() macro
  NFSD: Call NFSv2 encoders on error returns
  NFSD: Fix .pc_release method for NFSv2
  NFSD: Remove vestigial typedefs
  NFSD: Refactor nfsd_dispatch() error paths
  NFSD: Clean up nfsd_dispatch() variables
  NFSD: Clean up stale comments in nfsd_dispatch()
  NFSD: Clean up switch statement in nfsd_dispatch()
  ...

Pull exfat updates from Namjae Jeon:

 - Replace memcpy with structure assignment

 - Remove unneeded codes and use helper function i_blocksize()

 - Fix typos found by codespell

* tag 'exfat-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: remove useless check in exfat_move_file()
  exfat: remove 'rwoffset' in exfat_inode_info
  exfat: replace memcpy with structure assignment
  exfat: remove useless directory scan in exfat_add_entry()
  exfat: eliminate dead code in exfat_find()
  exfat: use i_blocksize() to get blocksize
  exfat: fix misspellings using codespell tool

Pull 9p updates from Dominique Martinet:
 "A couple of small fixes (loff_t overflow on 32bit, syzbot
  uninitialized variable warning) and code cleanup (xen)"

* tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux:
  net: 9p: initialize sun_server.sun_path to have addr's value only when addr is valid
  9p/xen: Fix format argument warning
  9P: Cast to loff_t before multiplying

In exfat_move_file(), the identity of source and target directory has been
checked by the caller.
Also, it gets stream.start_clu from file dir-entry, which is an invalid
determination.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

Remove 'rwoffset' in exfat_inode_info and replace it with the parameter of
exfat_readdir().
Since rwoffset is referenced only by exfat_readdir(), it is not necessary
a exfat_inode_info's member.
Also, change cpos to point to the next of entry-set, and return the index
of dir-entry via dir_entry->entry.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

Use structure assignment instead of memcpy.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

There is nothing in directory just created, so there is no need to scan.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

The exfat_find_dir_entry() called by exfat_find() doesn't return -EEXIST.
Therefore, the root-dir information setting is never executed.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

We alreday has the interface i_blocksize() to get blocksize,
so use it.
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

Sedat reported typos using codespell tool.

 $ codespell fs/exfat/*.c | grep -v iput
 fs/exfat/namei.c:293: upto ==> up to
 fs/exfat/nls.c:14: tabel ==> table

 $ codespell fs/exfat/*.h
 fs/exfat/exfat_fs.h:133: usally ==> usually

Fix typos found by codespell.
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

Pull watchdog updates from Wim Van Sebroeck:

 - Add Toshiba Visconti watchdog driver

 - it87_wdt: add IT8772 + IT8784

 - several fixes and improvements

* tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: Add Toshiba Visconti watchdog driver
  watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device
  watchdog: it87_wdt: add IT8784 ID
  watchdog: sp5100_tco: Enable watchdog on Family 17h devices if disabled
  watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3
  watchdog: renesas_wdt: support handover from bootloader
  watchdog: imx7ulp: Watchdog should continue running for wait/stop mode
  watchdog: rti: Simplify with dev_err_probe()
  watchdog: davinci: Simplify with dev_err_probe()
  watchdog: cadence: Simplify with dev_err_probe()
  watchdog: remove unneeded inclusion of <uapi/linux/sched/types.h>
  watchdog: Use put_device on error
  watchdog: Fix memleak in watchdog_cdev_register
  watchdog: imx7ulp: Strictly follow the sequence for wdog operations
  watchdog: it87_wdt: add IT8772 ID
  watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not needed
  drivers: watchdog: rdc321x_wdt: Fix race condition bugs

Pull RTC updates from Alexandre Belloni:
 "A new driver this cycle is making the bulk of the changes and the
  rx8010 driver has been rework to use the modern APIs.

  Summary:

  Subsystem:
   - new generic DT properties: aux-voltage-chargeable,
     trickle-voltage-millivolt

  New driver:
   - Microcrystal RV-3032

  Drivers:
   - ds1307: use aux-voltage-chargeable
   - r9701, rx8010: modernization of the driver
   - rv3028: fix clock output, trickle resistor values, RAM
     configuration registers"

* tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  rtc: r9701: set range
  rtc: r9701: convert to devm_rtc_allocate_device
  rtc: r9701: stop setting RWKCNT
  rtc: r9701: remove useless memset
  rtc: r9701: stop setting a default time
  rtc: r9701: remove leftover comment
  rtc: rv3032: Add a driver for Microcrystal RV-3032
  dt-bindings: rtc: rv3032: add RV-3032 bindings
  dt-bindings: rtc: add trickle-voltage-millivolt
  rtc: rv3028: ensure ram configuration registers are saved
  rtc: rv3028: factorize EERD bit handling
  rtc: rv3028: fix trickle resistor values
  rtc: rv3028: fix clock output support
  rtc: mt6397: Remove unused member dev
  rtc: rv8803: simplify the return expression of rv8803_nvram_write
  rtc: meson: simplify the return expression of meson_vrtc_probe
  rtc: rx8010: rename rx8010_init_client() to rx8010_init()
  rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally
  rtc: ds1307: consider aux-voltage-chargeable
  rtc: ds1307: store previous charge default per chip
  ...

Pull dmi update from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  Replace HTTP links with HTTPS ones: DMI/SMBIOS SUPPORT

Pull i2c updates from Wolfram Sang:

 - if a host can be a client, too, the I2C core can now use it to
   emulate SMBus HostNotify support (STM32 and R-Car added this so far)

 - also for client mode, a testunit has been added. It can create rare
   situations on the bus, so host controllers can be tested

 - a binding has been added to mark the bus as "single-master". This
   allows for better timeout detections

 - new driver for Mellanox Bluefield

 - massive refactoring of the Tegra driver

 - EEPROMs recognized by the at24 driver can now have custom names

 - rest is driver updates

* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits)
  Documentation: i2c: add testunit docs to index
  i2c: tegra: Improve driver module description
  i2c: tegra: Clean up whitespaces, newlines and indentation
  i2c: tegra: Clean up and improve comments
  i2c: tegra: Clean up printk messages
  i2c: tegra: Clean up variable names
  i2c: tegra: Improve formatting of variables
  i2c: tegra: Check errors for both positive and negative values
  i2c: tegra: Factor out hardware initialization into separate function
  i2c: tegra: Factor out register polling into separate function
  i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
  i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()
  i2c: tegra: Rename wait/poll functions
  i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()
  i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()
  i2c: tegra: Remove likely/unlikely from the code
  i2c: tegra: Remove outdated barrier()
  i2c: tegra: Clean up variable types
  i2c: tegra: Reorder location of functions in the code
  i2c: tegra: Clean up probe function
  ...

Pull ceph updates from Ilya Dryomov:

 - a patch that removes crush_workspace_mutex (myself). CRUSH
   computations are no longer serialized and can run in parallel.

 - a couple new filesystem client metrics for "ceph fs top" command
   (Xiubo Li)

 - a fix for a very old messenger bug that affected the filesystem,
   marked for stable (myself)

 - assorted fixups and cleanups throughout the codebase from Jeff and
   others.

* tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-client: (27 commits)
  libceph: clear con->out_msg on Policy::stateful_server faults
  libceph: format ceph_entity_addr nonces as unsigned
  libceph: fix ENTITY_NAME format suggestion
  libceph: move a dout in queue_con_delay()
  ceph: comment cleanups and clarifications
  ceph: break up send_cap_msg
  ceph: drop separate mdsc argument from __send_cap
  ceph: promote to unsigned long long before shifting
  ceph: don't SetPageError on readpage errors
  ceph: mark ceph_fmt_xattr() as printf-like for better type checking
  ceph: fold ceph_update_writeable_page into ceph_write_begin
  ceph: fold ceph_sync_writepages into writepage_nounlock
  ceph: fold ceph_sync_readpages into ceph_readpage
  ceph: don't call ceph_update_writeable_page from page_mkwrite
  ceph: break out writeback of incompatible snap context to separate function
  ceph: add a note explaining session reject error string
  libceph: switch to the new "osd blocklist add" command
  libceph, rbd, ceph: "blacklist" -> "blocklist"
  ceph: have ceph_writepages_start call pagevec_lookup_range_tag
  ceph: use kill_anon_super helper
  ...

NFS_FS=y as dependency of CONFIG_NFSD_V4_2_INTER_SSC still have
build errors and some configs with NFSD=m to get NFS4ERR_STALE
error when doing inter server copy.

Added ops table in nfs_common for knfsd to access NFS client modules.

Fixes: 3ac3711a ("NFSD: Fix NFS server build errors")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Pull XArray updates from Matthew Wilcox:

 - Fix the test suite after introduction of the local_lock

 - Fix a bug in the IDA spotted by Coverity

 - Change the API that allows the workingset code to delete a node

 - Fix xas_reload() when dealing with entries that occupy multiple
   indices

 - Add a few more tests to the test suite

 - Fix an unsigned int being shifted into an unsigned long

* tag 'xarray-5.9' of git://git.infradead.org/users/willy/xarray:
  XArray: Fix xas_create_range for ranges above 4 billion
  radix-tree: fix the comment of radix_tree_next_slot()
  XArray: Fix xas_reload for multi-index entries
  XArray: Add private interface for workingset node deletion
  XArray: Fix xas_for_each_conflict documentation
  XArray: Test marked multiorder iterations
  XArray: Test two more things about xa_cmpxchg
  ida: Free allocated bitmap in error path
  radix tree test suite: Fix compilation

Pull NFS client updates from Anna Schumaker:
 "Stable Fixes:
   - Wait for stateid updates after CLOSE/OPEN_DOWNGRADE # v5.4+
   - Fix nfs_path in case of a rename retry
   - Support EXCHID4_FLAG_SUPP_FENCE_OPS v4.2 EXCHANGE_ID flag

  New features and improvements:
   - Replace dprintk() calls with tracepoints
   - Make cache consistency bitmap dynamic
   - Added support for the NFS v4.2 READ_PLUS operation
   - Improvements to net namespace uniquifier

  Other bugfixes and cleanups:
   - Remove redundant clnt pointer
   - Don't update timeout values on connection resets
   - Remove redundant tracepoints
   - Various cleanups to comments
   - Fix oops when trying to use copy_file_range with v4.0 source server
   - Improvements to flexfiles mirrors
   - Add missing 'local_lock=posix' mount option"

* tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (55 commits)
  NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flag
  NFSv4: Fix up RCU annotations for struct nfs_netns_client
  NFS: Only reference user namespace from nfs4idmap struct instead of cred
  nfs: add missing "posix" local_lock constant table definition
  NFSv4: Use the net namespace uniquifier if it is set
  NFSv4: Clean up initialisation of uniquified client id strings
  NFS: Decode a full READ_PLUS reply
  SUNRPC: Add an xdr_align_data() function
  NFS: Add READ_PLUS hole segment decoding
  SUNRPC: Add the ability to expand holes in data pages
  SUNRPC: Split out _shift_data_right_tail()
  SUNRPC: Split out xdr_realign_pages() from xdr_align_pages()
  NFS: Add READ_PLUS data segment support
  NFS: Use xdr_page_pos() in NFSv4 decode_getacl()
  SUNRPC: Implement a xdr_page_pos() function
  SUNRPC: Split out a function for setting current page
  NFS: fix nfs_path in case of a rename retry
  fs: nfs: return per memcg count for xattr shrinkers
  NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE
  nfs: remove incorrect fallthrough label
  ...

Pull io_uring updates from Jens Axboe:
 "A mix of fixes and a few stragglers. In detail:

   - Revert the bogus __read_mostly that we discussed for the initial
     pull request.

   - Fix a merge window regression with fixed file registration error
     path handling.

   - Fix io-wq numa node affinities.

   - Series abstracting out an io_identity struct, making it both easier
     to see what the personality items are, and also easier to to adopt
     more. Use this to cover audit logging.

   - Fix for read-ahead disabled block condition in async buffered
     reads, and using single page read-ahead to unify what
     generic_file_buffer_read() path is used.

   - Series for REQ_F_COMP_LOCKED fix and removal of it (Pavel)

   - Poll fix (Pavel)"

* tag 'io_uring-5.10-2020-10-20' of git://git.kernel.dk/linux-block: (21 commits)
  io_uring: use blk_queue_nowait() to check if NOWAIT supported
  mm: use limited read-ahead to satisfy read
  mm: mark async iocb read as NOWAIT once some data has been copied
  io_uring: fix double poll mask init
  io-wq: inherit audit loginuid and sessionid
  io_uring: use percpu counters to track inflight requests
  io_uring: assign new io_identity for task if members have changed
  io_uring: store io_identity in io_uring_task
  io_uring: COW io_identity on mismatch
  io_uring: move io identity items into separate struct
  io_uring: rely solely on work flags to determine personality.
  io_uring: pass required context in as flags
  io-wq: assign NUMA node locality if appropriate
  io_uring: fix error path cleanup in io_sqe_files_register()
  Revert "io_uring: mark io_uring_fops/io_op_defs as __read_mostly"
  io_uring: fix REQ_F_COMP_LOCKED by killing it
  io_uring: dig out COMP_LOCK from deep call chain
  io_uring: don't put a poll req under spinlock
  io_uring: don't unnecessarily clear F_LINK_TIMEOUT
  io_uring: don't set COMP_LOCKED if won't put
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - add wireless type
   - properly document current direction

  Battery/charger driver changes:
   - new fuel-gauge/charger driver for RN5T618/RN5T619
   - new charger driver for BQ25980, BQ25975 and BQ25960
   - bq27xxx-battery: add support for TI bq34z100
   - gpio-charger: convert to GPIO descriptors
   - gpio-charger: add optional support for charge current limiting
   - max17040: add support for max17041, max17043, max17044
   - max17040: add support for max17048, max17049, max17058, max17059
   - smb347-charger: add DT support
   - smb247-charger: add SMB345 and SMB358 support
   - simple-battery: add temperature properties
   - lots of minor fixes, cleanups and DT binding YAML conversions

  Reset drivers:
   - ocelot: Add support for Sparx5"

* tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (81 commits)
  power: reset: POWER_RESET_OCELOT_RESET should depend on Ocelot or Sparx5
  power: supply: bq25980: Fix uninitialized wd_reg_val and overrun
  power: supply: ltc2941: Fix ptr to enum cast
  power: supply: test-power: revise parameter printing to use sprintf
  power: supply: charger-manager: fix incorrect check on charging_duration_ms
  power: supply: max17040: Fix ptr to enum cast
  power: supply: bq25980: Fix uninitialized wd_reg_val
  power: supply: bq25980: remove redundant zero check on ret
  power: reset: ocelot: Add support for Sparx5
  dt-bindings: reset: ocelot: Add Sparx5 support
  power: supply: sbs-battery: keep error code when get_property() fails
  power: supply: bq25980: Add support for the BQ259xx family
  dt-binding: bq25980: Add the bq25980 flash charger
  power: supply: fix spelling mistake "unprecise" -> "imprecise"
  power: supply: test_power: add missing newlines when printing parameters by sysfs
  power: supply: pm2301: drop duplicated i2c_device_id
  power: supply: charger-manager: drop unused charger assignment
  power: supply: rt9455: skip 'struct acpi_device_id' when !CONFIG_ACPI
  power: supply: goldfish: skip 'struct acpi_device_id' when !CONFIG_ACPI
  power: supply: bq25890: skip 'struct acpi_device_id' when !CONFIG_ACPI
  ...

When the passed token is longer than 4032 bytes, the remaining part
of the token must be copied from the rqstp->rq_arg.pages. But the
copy must make sure it happens in a consecutive way.

With the existing code, the first memcpy copies 'length' bytes from
argv->iobase, but since the header is in front, this never fills the
whole first page of in_token->pages.

The mecpy in the loop copies the following bytes, but starts writing at
the next page of in_token->pages.  This leaves the last bytes of page 0
unwritten.

Symptoms were that users with many groups were not able to access NFS
exports, when using Active Directory as the KDC.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Fixes: 5866efa8 "SUNRPC: Fix svcauth_gss_proxy_init()"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Its possible that using AUTH_SYS and mountd manage-gids option a
user may hit the 8k RPC channel buffer limit. This have been observed
on field, causing unanswered RPCs on clients after mountd fails to
write on channel :

rpc.mountd[11231]: auth_unix_gid: error writing reply

Userland nfs-utils uses a buffer size of 32k (RPC_CHAN_BUF_SIZE), so
lets match those two.
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Pull drm fixes from Dave Airlie:
 "Some fixes queued up already for i915 and amdgpu, I've also included
  the fix for the clang warning you've seen.

  i915:
   - set all unused color plane offsets to ~0xfff again (Ville)
   - fix TGL DKL PHY DP vswing handling (Ville)

  amdgpu:
   - DCN clang warning fix
   - eDP fix
   - BACO fix
   - kernel documentation fixes
   - SMU7 mclk fix
   - VCN1 hw bug workaround

  amdkfd:
   - kvfree vs kfree fix"

* tag 'drm-next-2020-10-19' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Fix incorrect dsc force enable logic
  drm/amdkfd: Use kvfree in destroy_crat_image
  drm/amdgpu: vcn and jpeg ring synchronization
  drm/amd/pm: increase mclk switch threshold to 200 us
  docs: amdgpu: fix a warning when building the documentation
  drm/amd/display: kernel-doc: document force_timing_sync
  drm/amdgpu/swsmu: init the baco mutex in early_init
  drm/amd/display: Fix module load hangs when connected to an eDP
  drm/i915: Set all unused color plane offsets to ~0xfff again
  drm/i915: Fix TGL DKL PHY DP vswing handling

Pull iommu fix from Joerg Roedel:
 "Fix a build regression with !CONFIG_IOMMU_API"

* tag 'iommu-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Don't dereference iommu_device if IOMMU_API is not built

Pull more xen updates from Juergen Gross:

 - A single patch to fix the Xen security issue XSA-331 (malicious
   guests can DoS dom0 by triggering NULL-pointer dereferences or access
   to stale data).

 - A larger series to fix the Xen security issue XSA-332 (malicious
   guests can DoS dom0 by sending events at high frequency leading to
   dom0's vcpus being busy in IRQ handling for elongated times).

* tag 'for-linus-5.10b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/events: block rogue events for some time
  xen/events: defer eoi in case of excessive number of events
  xen/events: use a common cpu hotplug hook for event channels
  xen/events: switch user event channels to lateeoi model
  xen/pciback: use lateeoi irq binding
  xen/pvcallsback: use lateeoi irq binding
  xen/scsiback: use lateeoi irq binding
  xen/netback: use lateeoi irq binding
  xen/blkback: use lateeoi irq binding
  xen/events: add a new "late EOI" evtchn framework
  xen/events: fix race in evtchn_fifo_unmask()
  xen/events: add a proper barrier to 2-level uevent unmasking
  xen/events: avoid removing an event channel while handling it

Pull ARM updates from Russell King:

 - handle inexact watchpoint addresses (Douglas Anderson)

 - decompressor serial debug cleanups (Linus Walleij)

 - update L2 cache prefetch bits (Guillaume Tucker)

 - add text offset and malloc size to the decompressor kexec data

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: add malloc size to decompressor kexec size structure
  ARM: add TEXT_OFFSET to decompressor kexec image structure
  ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values
  ARM: 9010/1: uncompress: Print the location of appended DTB
  ARM: 9009/1: uncompress: Enable debug in head.S
  ARM: 9008/1: uncompress: Drop excess whitespace print
  ARM: 9006/1: uncompress: Wait for ready and busy in debug prints
  ARM: 9005/1: debug: Select flow control for all debug UARTs
  ARM: 9004/1: debug: Split waituart to CTS and TXRDY
  ARM: 9003/1: uncompress: Delete unused debug macros
  ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses

Pull ARC updates from Vineet Gupta:
 "The bulk of ARC pull request is removal of EZChip NPS platform which
  was suffering from constant bitrot. In recent years EZChip has gone
  though multiple successive acquisitions and I guess things and people
  move on. I would like to take this opportunity to recognize and thank
  all those good folks (Gilad, Noam, Ofer...) for contributing major
  bits to ARC port (SMP, Big Endian).

  Summary:

   - drop support for EZChip NPS platform

   - misc other fixes"

* tag 'arc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  arc: include/asm: fix typos of "themselves"
  ARC: SMP: fix typo and use "come up" instead of "comeup"
  ARC: [dts] fix the errors detected by dtbs_check
  arc: plat-hsdk: fix kconfig dependency warning when !RESET_CONTROLLER
  ARC: [plat-eznps]: Drop support for EZChip NPS platform

In order to avoid high dom0 load due to rogue guests sending events at
high frequency, block those events in case there was no action needed
in dom0 to handle the events.

This is done by adding a per-event counter, which set to zero in case
an EOI without the XEN_EOI_FLAG_SPURIOUS is received from a backend
driver, and incremented when this flag has been set. In case the
counter is 2 or higher delay the EOI by 1 << (cnt - 2) jiffies, but
not more than 1 second.

In order not to waste memory shorten the per-event refcnt to two bytes
(it should normally never exceed a value of 2). Add an overflow check
to evtchn_get() to make sure the 2 bytes really won't overflow.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>

In case rogue guests are sending events at high frequency it might
happen that xen_evtchn_do_upcall() won't stop processing events in
dom0. As this is done in irq handling a crash might be the result.

In order to avoid that, delay further inter-domain events after some
time in xen_evtchn_do_upcall() by forcing eoi processing into a
worker on the same cpu, thus inhibiting new events coming in.

The time after which eoi processing is to be delayed is configurable
via a new module parameter "event_loop_timeout" which specifies the
maximum event loop time in jiffies (default: 2, the value was chosen
after some tests showing that a value of 2 was the lowest with an
only slight drop of dom0 network throughput while multiple guests
performed an event storm).

How long eoi processing will be delayed can be specified via another
parameter "event_eoi_delay" (again in jiffies, default 10, again the
value was chosen after testing with different delay values).

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>

Today only fifo event channels have a cpu hotplug callback. In order
to prepare for more percpu (de)init work move that callback into
events_base.c and add percpu_init() and percpu_deinit() hooks to
struct evtchn_ops.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>

Instead of disabling the irq when an event is received and enabling
it again when handled by the user process use the lateeoi model.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>

In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving pcifront use the lateeoi irq
binding for pciback and unmask the event channel only just before
leaving the event handling function.

Restructure the handling to support that scheme. Basically an event can
come in for two reasons: either a normal request for a pciback action,
which is handled in a worker, or in case the guest has finished an AER
request which was requested by pciback.

When an AER request is issued to the guest and a normal pciback action
is currently active issue an EOI early in order to be able to receive
another event when the AER request has been finished by the guest.

Let the worker processing the normal requests run until no further
request is pending, instead of starting a new worker ion that case.
Issue the EOI only just before leaving the worker.

This scheme allows to drop calling the generic function
xen_pcibk_test_and_schedule_op() after processing of any request as
the handling of both request types is now separated more cleanly.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>

In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving pvcallsfront use the lateeoi
irq binding for pvcallsback and unmask the event channel only after
handling all write requests, which are the ones coming in via an irq.

This requires modifying the logic a little bit to not require an event
for each write request, but to keep the ioworker running until no
further data is found on the ring page to be processed.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>

In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving scsifront use the lateeoi
irq binding for scsiback and unmask the event channel only just before
leaving the event handling function.

In case of a ring protocol error don't issue an EOI in order to avoid
the possibility to use that for producing an event storm. This at once
will result in no further call of scsiback_irq_fn(), so the ring_error
struct member can be dropped and scsiback_do_cmd_fn() can signal the
protocol error via a negative return value.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>

In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving netfront use the lateeoi
irq binding for netback and unmask the event channel only just before
going to sleep waiting for new events.

Make sure not to issue an EOI when none is pending by introducing an
eoi_pending element to struct xenvif_queue.

When no request has been consumed set the spurious flag when sending
the EOI for an interrupt.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>

In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving blkfront use the lateeoi
irq binding for blkback and unmask the event channel only after
processing all pending requests.

As the thread processing requests is used to do purging work in regular
intervals an EOI may be sent only after having received an event. If
there was no pending I/O request flag the EOI as spurious.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>

In order to avoid tight event channel related IRQ loops add a new
framework of "late EOI" handling: the IRQ the event channel is bound
to will be masked until the event has been handled and the related
driver is capable to handle another event. The driver is responsible
for unmasking the event channel via the new function xen_irq_lateeoi().

This is similar to binding an event channel to a threaded IRQ, but
without having to structure the driver accordingly.

In order to support a future special handling in case a rogue guest
is sending lots of unsolicited events, add a flag to xen_irq_lateeoi()
which can be set by the caller to indicate the event was a spurious
one.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>

Unmasking a fifo event channel can result in unmasking it twice, once
directly in the kernel and once via a hypercall in case the event was
pending.

Fix that by doing the local unmask only if the event is not pending.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>

A follow-up patch will require certain write to happen before an event
channel is unmasked.

While the memory barrier is not strictly necessary for all the callers,
the main one will need it. In order to avoid an extra memory barrier
when using fifo event channels, mandate evtchn_unmask() to provide
write ordering.

The 2-level event handling unmask operation is missing an appropriate
barrier, so add it. Fifo event channels are fine in this regard due to
using sync_cmpxchg().

This is part of XSA-332.

Cc: stable@vger.kernel.org
Suggested-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Wei Liu <wl@xen.org>

Today it can happen that an event channel is being removed from the
system while the event handling loop is active. This can lead to a
race resulting in crashes or WARN() splats when trying to access the
irq_info structure related to the event channel.

Fix this problem by using a rwlock taken as reader in the event
handling loop and as writer when deallocating the irq_info structure.

As the observed problem was a NULL dereference in evtchn_from_irq()
make this function more robust against races by testing the irq_info
pointer to be not NULL before dereferencing it.

And finally make all accesses to evtchn_to_irq[row][col] atomic ones
in order to avoid seeing partial updates of an array element in irq
handling. Note that irq handling can be entered only for event channels
which have been valid before, so any not populated row isn't a problem
in this regard, as rows are only ever added and never removed.

This is XSA-331.

Cc: stable@vger.kernel.org
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reported-by: Jinoh Kang <luke1337@theori.io>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>