- 07 Nov, 2005 40 commits
-
-
Nishanth Aravamudan authored
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Nishanth Aravamudan authored
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by:
-
Nishanth Aravamudan authored
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Also use msecs_to_jiffies() instead of direct HZ division to avoid rounding errors. Signed-off-by:
-
Nishanth Aravamudan authored
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Nishanth Aravamudan authored
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Also use human-time conversion functions instead of hard-coded HZ division to avoid rounding errors. Signed-off-by:
-
Nishanth Aravamudan authored
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by:
-
Nishanth Aravamudan authored
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by:
-
Randy Dunlap authored
Fix new kernel-doc errors in vmalloc.c. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Rob Landley authored
Docs for ramfs, rootfs, and initramfs. Signed-off-by:
Rob Landley <rob@landley.net> Signed-off-by:
-
Pekka Enberg authored
This patch splits dentry locking documentation from Documentation/filesystems/vfs.txt to a separate file. The dentry locking bits are useful but do not fit into the VFS overview document as is. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Pekka Enberg authored
This patch updates the Documentation/filesystems/vfs.txt document. I rearranged and rewrote parts of the introduction chapter and added better headings for each section. I also added a description for the inode rename() operation which was missing and added links to some useful external VFS documentation. Signed-off-by:
-
Randy Dunlap authored
Convert to proper kernel-doc format. Some have extra blank lines (not allowed immed. after the function name) or need blank lines (after all parameters). Function summary must be only one line. Colon (":") in a function description does weird things (causes kernel-doc to think that it's a new section head sadly). Signed-off-by: -
Randy Dunlap authored
Various core kernel-doc cleanups: - add missing function parameters in ipc, irq/manage, kernel/sys, kernel/sysctl, and mm/slab; - move description to just above function for kernel_restart() Signed-off-by:
-
Randy Dunlap authored
Put text into < 80 columns. No other changes. Signed-off-by:
-
Randy Dunlap authored
Fix various warnings in kernel-doc: Warning(linux-2614-rc4//include/linux/net.h:89): Enum value 'SOCK_DCCP' not described in enum 'sock_type' usercopy.c: should use !E instead of !I for exported symbols: Warning(linux-2614-rc4//arch/i386/lib/usercopy.c): no structured comments found fs.h does not need to use !E since it has no exported symbols: Warning(linux-2614-rc4//include/linux/fs.h:1182): No description found for parameter 'find_exported_dentry' Warning(linux-2614-rc4//include/linux/fs.h): no structured comments found irq/manage.c should use !E for its exported symbols: Warning(linux-2614-rc4//kernel/irq/manage.c): no structured comments found macmodes.c should use !E for its exported symbols: Warning(linux-2614-rc4//drivers/video/macmodes.c): no structured comments found Signed-off-by:
-
Randy Dunlap authored
Add structure fields kernel-doc for 2 fields in struct journal_s. Warning(/var/linsrc/linux-2614-rc4//include/linux/jbd.h:808): No description found for parameter 'j_wbuf' Warning(/var/linsrc/linux-2614-rc4//include/linux/jbd.h:808): No description found for parameter 'j_wbufsize' Convert fs/jbd/recovery.c non-static functions to kernel-doc format. fs/jbd/recovery.c doesn't export any symbols, so it should use !I instead of !E to eliminate this warning message: Warning(/var/linsrc/linux-2614-rc4//fs/jbd/recovery.c): no structured comments found Signed-off-by:
-
Randy Dunlap authored
Clean up typos, kernel function interfaces, acronyms, add whitespace, improve readability. Signed-off-by:
-
Jesper Juhl authored
Update ksymoops related documentation to reflect current 2.6 reality. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
I've recently added this documentation, Alasdair gave some corrections, and here are some further corrections on top of his work (partly style issue, partly a technical error due to different past experience, partly a note which I've added - i.e. transient snapshots are lighter). Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Ville Syrjälä authored
The current init code sets hiprilvl to 0 and maxhipri to 5. According to the specs those values are illegal on both G200 and G400. It also causes distortions on the TV-out at least when CRTC2 is in YUV mode as is the case with DirectFB. This patch resets both values to 0. Signed-off-by:
Ville Syrjälä <syrjala@sci.fi> Signed-off-by:
Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Ville Syrjälä authored
No point in spamming the logs with a message about xres rounding. Signed-off-by:
-
Ville Syrjälä authored
Use the CACHEFLUSH register on all chip types. The register is listed in all other specs except 2064W. However I have verified that the register does work on a 2064W despite being marked reserved in the specs. There were no noticeable side effects after writing to the register. Signed-off-by:
-
Ville Syrjälä authored
Add new entries for Mystique AGP with the PCI ID 0x051e. I don't actually have such boards but according to google they do exist. Curiosly X.Org doesn't recognize that PCI ID. And what's even more interesting is that Matrox's own Windows drivers don't recognize it either. After going through about a dozen different versions I did find one older driver that does list this particular ID. It is also listed in the pci.ids file. I'm not sure if non-220 AGP chips exist. I left the chip revision check intact for AGP chips nonetheless. Signed-off-by:
-
Ville Syrjälä authored
wait_event_event_interruptible() uses a private wait queue entry so there's no need for the caller to initialize one. Signed-off-by:
-
Jake Moilanen authored
Here's the PCI ID for the ATI RN50 chip. Signed-off-by:
Jake Moilanen <moilanen@austin.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@hotpop.com> Signed-off-by:
-
Antonino A. Daplas authored
Convert i810fb, nvidiafb and savagefb to use the fb_find_best_display helper when searching for the initial video mode. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Antonino A. Daplas authored
Add new helper, fb_find_best_display(), which will search the modelist for the best mode for the attached display. This requires an EDID block that is converted to struct fb_monspecs and a private modelist. The search will be done in this manner: - if 1st detailed timing is preferred, use that - else if dimensions of the display are known, use that to estimate xres and - else if modelist has detailed timings, use the first detailed timing - else, use the very first entry from the modelist Signed-off-by:
-
Antonino A. Daplas authored
Rearrange mode database entries such that preferred timings are entered first, and less preferred timings are entered last. (Detailed, VESA, established/standard). Signed-off-by:
-
Zach Smith authored
I converted the "rl" console font from the kbd utility to be a built-in font for the framebuffer console, and I was wondering if you would be OK with including it. I've generated a font_rl.c file and related minor modifications. I find it's the most visually appealing of the kbd fonts which is why I use it and selected it for conversion. I believe the font is GPL'd. Signed-off-by:
-
Antonino A. Daplas authored
Fix following compile error (From Kernel Bugzilla Bug 5427): include/linux/console_struct.h:53: error: field `vt_mode' has incomplete type Signed-off-by:
-
Antonino A. Daplas authored
- The functions for reading the 1st and 2nd bus are essentially the same, except for the register. Consolidate them all. - According to Nicolas Boichat, there is an undocumented 3rd i2c bus for attaching daughter cards. Add support for this. Signed-off-by:
-
Antonino A. Daplas authored
vesafb occassionally gets the size wrong when setting the mtrr. When X or DRI attempts to set the mtrr, it will fail due to range overlap significantly affecting their performance. Disable mtrr and let the user explicitly enable it with the mtrr:n option. Signed-off-by:
-
Ben Dooks authored
Initialise the .owner field, so that if the driver is built as a module, the system has a link to the owner Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Michal Januszewski authored
Currently the fb_find_nearest_mode() function finds a mode with screen resolution closest to that described by the 'var' argument and with some arbitrary refresh rate (eg. in the following sequence of refresh rates: 70 60 53 85 75, 53 is selected). This patch fixes the function so that it looks for the closest mode as far as both resolution and refresh rate are concerned. The function's first argument is changed to fb_videomode so that the refresh rate can be specified by the caller, as fb_var_screeninfo doesn't have any fields that could directly hold this data. Signed-off-by:
Michal Januszewski <spock@gentoo.org> Signed-off-by:
-
Antonino A. Daplas authored
Use do {} while(0) for empty reverse_order() macro. Signed-off-by: -
Antonino A. Daplas authored
Some EDID blocks set the flag "prefer first detailed timing" without providing any detailed timing at all. Clear this flag if the block does not provide detailed timings. Signed-off-by:
-
Peter 'p2' De Schrijver authored
Attached is a small patch which configures the correct memory clock and timings on the Elsa Winner 2000 Office pm2 based card. This is necessary when the card is used on a platform which does not support PC style BIOS initialization. Signed-off-by:
-
Antonino A. Daplas authored
Use MMIO registers instead of banging the VGA IO registers. Signed-off-by:
-
Antonino A. Daplas authored
Reported by: Jean-Philippe Guérard (Bugzilla Bug 1782) "I've tried with video=atyfb:debug and video=atyfb:debug,mode:1280x600, \ nomtrr. In both case, the screen stays black, but seems divided into 4 vertical bands. Some white lines pop up randomly on each vertical band." The problem is a combination of an incorrect xclk plus lack of timing information. The adapter is attached to an LCD device that can do 1280x600 (which is not a standard resolution). The global mode database does not have an entry for it. Fortunately, the Video BIOS contains the complete timing info for this display, however, atyfb is not making use of it. Add support to get the timing information from the BIOS, if available. Signed-off-by:
-
