Driver was issuing set driver version command through all
functions in the adapter. Fix the driver to issue set driver
version once per adapter, through function 0.
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit d8af4dfd ("net/tg3: Fix kernel crash") introduced a possible
NULL pointer dereference in tg3 driver when !netdev || !netif_running(netdev)
condition is met and netdev is NULL. Then, the jump to the 'done' label
calls dev_close() with a netdevice that is NULL. Therefore, only call
dev_close() when we have a netdevice, but one that is not running.

[ Add the same checks in tg3_io_slot_reset() per Gavin Shan - by Nithin
Nayak Sujir ]
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 56b765b7 ("htb: improved accuracy at high rates")
broke the "linklayer atm" handling.

 tc class add ... htb rate X ceil Y linklayer atm

The linklayer setting is implemented by modifying the rate table
which is send to the kernel.  No direct parameter were
transferred to the kernel indicating the linklayer setting.

The commit 56b765b7 ("htb: improved accuracy at high rates")
removed the use of the rate table system.

To keep compatible with older iproute2 utils, this patch detects
the linklayer by parsing the rate table.  It also supports future
versions of iproute2 to send this linklayer parameter to the
kernel directly. This is done by using the __reserved field in
struct tc_ratespec, to convey the choosen linklayer option, but
only using the lower 4 bits of this field.

Linklayer detection is limited to speeds below 100Mbit/s, because
at high rates the rtab is gets too inaccurate, so bad that
several fields contain the same values, this resembling the ATM
detect.  Fields even start to contain "0" time to send, e.g. at
1000Mbit/s sending a 96 bytes packet cost "0", thus the rtab have
been more broken than we first realized.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jesse Gross says:

====================
Three bug fixes that are fairly small either way but resolve obviously
incorrect code. For net/3.11.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers supporting NAPI should use a NAPI-specific function for receiving
packets.  Hence netif_rx is changed to netif_receive_skb.

Furthermore netif_napi_del should be used in the probe and remove function
to clean up the NAPI resource information.

Thanks to Francois Romieu, David Shwatrz and Rami Rosen for their help on
this patch.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit f83331ba.

As the tests PPC64 (powernv platform) show, IOMMU pages are leaking
when transferring big amount of small packets (<=64 bytes),
"ping -f" and waiting for 15 seconds is the simplest way to confirm the bug.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Santosh Rastapur <santosh@chelsio.com>
Cc: Jay Fenlason <fenlason@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Divy Le ray <divy@chelsio.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is possible for some versions of firmware to advertise capabilities that driver
is not ready to handle. This may lead to controller stall. Since the driver is
interested only in subset of flags, clearing the rest.
Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It doesn't make sense to output a tunnel packet using the same
parameters that it was received with since that will generally
just result in the packet going back to us. As a result, userspace
assumes that the tunnel key is cleared when transitioning through
the switch. In the majority of cases this doesn't matter since a
packet is either going to a tunnel port (in which the key is
overwritten with new values) or to a non-tunnel port (in which
case the key is ignored). However, it's theoreticaly possible that
userspace could rely on the documented behavior, so this corrects
it.
Signed-off-by: Jesse Gross <jesse@nicira.com>

Flex array is used to allocate hash buckets which is type struct
hlist_head, but we use `struct hlist_head *` to calculate
array size.  Since hlist_head is of size pointer it works fine.

Following patch use correct type.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>

git silently included an extra hunk in vport_cmd_set() during
automatic merging. This code is unreachable so it does not actually
introduce a problem but it is clearly incorrect.
Signed-off-by: Jesse Gross <jesse@nicira.com>

Since we set "len = total_len" in the beginning of tun_get_user(),
so we should compare the new len with 0, instead of total_len,
or the if statement always returns false.
Signed-off-by: Weiping Pan <wpan@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the iproute2 command `bridge vlan show`, after switching from
rtgenmsg to ifinfomsg.

Let's start with a little history:

Feb 20:   Vlad Yasevich got his VLAN-aware bridge patchset included in
          the 3.9 merge window.
          In the kernel commit 6cbdceeb, he added attribute support to
          bridge GETLINK requests sent with rtgenmsg.

Mar 6th:  Vlad got this iproute2 reference implementation of the bridge
          vlan netlink interface accepted (iproute2 9eff0e5c)

Apr 25th: iproute2 switched from using rtgenmsg to ifinfomsg (63338dca)
          http://patchwork.ozlabs.org/patch/239602/
          http://marc.info/?t=136680900700007

Apr 28th: Linus released 3.9

Apr 30th: Stephen released iproute2 3.9.0

The `bridge vlan show` command haven't been working since the switch to
ifinfomsg, or in a released version of iproute2. Since the kernel side
only supports rtgenmsg, which iproute2 switched away from just prior to
the iproute2 3.9.0 release.

I haven't been able to find any documentation, about neither rtgenmsg
nor ifinfomsg, and in which situation to use which, but kernel commit
88c5b5ce seams to suggest that ifinfomsg should be used.

Fixing this in kernel will break compatibility, but I doubt that anybody
have been using it due to this bug in the user space reference
implementation, at least not without noticing this bug. That said the
functionality is still fully functional in 3.9, when reversing iproute2
commit 63338dca.

This could also be fixed in iproute2, but thats an ugly patch that would
reintroduce rtgenmsg in iproute2, and from searching in netdev it seams
like rtgenmsg usage is discouraged. I'm assuming that the only reason
that Vlad implemented the kernel side to use rtgenmsg, was because
iproute2 was using it at the time.
Signed-off-by: Asbjoern Sloth Toennesen <ast@fiberby.net>
Reviewed-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initially I improperly set a boundary for maximum number of input
packets to process on NAPI poll ("work") so it might be more than
expected amount ("weight").

This was really harmless but seeing WARN_ON_ONCE on every device boot is
not nice. So trivial fix ("<" instead of "<=") is here.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Mischa Jonker <mjonker@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Using inner-id for tunnel id is not safe in some rare cases.
E.g. packets coming from multiple sources entering same tunnel
can have same id. Therefore on tunnel packet receive we
could have packets from two different stream but with same
source and dst IP with same ip-id which could confuse ip packet
reassembly.

Following patch reverts optimization from commit
490ab081 (IP_GRE: Fix IP-Identification.)

CC: Jarno Rajahalme <jrajahalme@nicira.com>
CC: Ansis Atteka <aatteka@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dmitry Kravkov says:

====================
Please consider applying the series of bnx2x fixes to net:
	* statistics may cause FW assert
	* missing fairness configuration in DCB flow
	* memory leak in sriov related part
	* Illegal PTE access
	* Pagefault crash in shutdown flow with cnic
v1->v2
	* fixed sparse error pointed by Joe Perches
	* added missing signed-off from Sergei Shtylyov
v2->v3
	* added missing signed-off from Sergei Shtylyov
	* fixed formatting from Sergei Shtylyov
v3->v4
	* patch 1/6: fixed declaration order
	* patch 2/6 replaced with: protect flows using set_bit constraints
v4->v5
	* patch 2/6: replace proprietary locking with semaphore
	* droped 1/6: since adds redundant code from Benjamin Poirier
The following patchset contains four netfilter fixes, they are:

* Fix possible invalid access and mangling of the TCPMSS option in
  xt_TCPMSS. This was spotted by Julian Anastasov.

* Fix possible off by one access and mangling of the TCP packet in
  xt_TCPOPTSTRIP, also spotted by Julian Anastasov.

* Fix possible information leak due to missing initialization of one
  padding field of several structures that are included in nfqueue and
  nflog netlink messages, from Dan Carpenter.

* Fix TCP window tracking with Fast Open, from Yuchung Cheng.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There might be a crash as during shutdown flow CNIC might try
to access resources already freed by bnx2x.
Change bnx2x_close() into dev_close() in __bnx2x_remove (shutdown flow)
to guarantee CNIC is notified of the device's change of status.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PTE write access error  might occur in MF_ALLOWED mode when IOMMU
is active. The patch adds rmmod HSI indicating to MFW to stop
running queries which might trigger this failure.
Signed-off-by: Barak Witkowsky <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ETS can be enabled as a result of DCB negotiation, then
fairness must be recalculated after each negotiation.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add locking to protect different statistics flows from
running simultaneously.
This in order to serialize statistics requests sent to FW,
otherwise two outstanding queries may cause FW assert.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove Andrew Gallatin, as he is no longer with Myricom. Add
Hyong-Youb Kim as the new maintainer. Update the website URL.
Signed-off-by: Hyong-Youb Kim <hykim@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The DMA sync should sync the whole receive buffer, not just
part of it. Fixes log messages dma_sync_check.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When dumping generic netlink families, only the first dump call
is locked with genl_lock(), which protects the list of families,
and thus subsequent calls can access the data without locking,
racing against family addition/removal. This can cause a crash.
Fix it - the locking needs to be conditional because the first
time around it's already locked.

A similar bug was reported to me on an old kernel (3.4.47) but
the exact scenario that happened there is no longer possible,
on those kernels the first round wasn't locked either. Looking
at the current code I found the race described above, which had
also existed on the old kernel.

Cc: stable@vger.kernel.org
Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Probably this one is quite unlikely to be triggered, but it's more safe
to do the call_rcu() at the end after we have dropped the reference on
the asoc and freed sctp packet chunks. The reason why is because in
sctp_transport_destroy_rcu() the transport is being kfree()'d, and if
we're unlucky enough we could run into corrupted pointers. Probably
that's more of theoretical nature, but it's safer to have this simple fix.

Introduced by commit 8c98653f ("sctp: sctp_close: fix release of bindings
for deferred call_rcu's"). I also did the 8c98653f regression test and
it's fine that way.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The SCTP Quick failover draft [1] section 5.1, point 5 says that the cwnd
should be 1 MTU. So, instead of 1, set it to 1 MTU.

  [1] https://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05Reported-by: Karl Heiss <kheiss@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In stmmac_init_rx_buffers():
* add missing handling of dma_map_single() error
* remove superfluous unlikely() optimization while at it

Add stmmac_free_rx_buffers() helper and use it in dma_free_rx_skbufs().

In init_dma_desc_rings():
* add missing handling of kmalloc_array() errors
* fix handling of dma_alloc_coherent() and stmmac_init_rx_buffers() errors
* make function return an error value on error and 0 on success

In stmmac_open():
* add handling of init_dma_desc_rings() return value
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We met lockdep warning when enable and disable the bearer for commands such as:

tipc-config -netid=1234 -addr=1.1.3 -be=eth:eth0
tipc-config -netid=1234 -addr=1.1.3 -bd=eth:eth0

---------------------------------------------------

[  327.693595] ======================================================
[  327.693994] [ INFO: possible circular locking dependency detected ]
[  327.694519] 3.11.0-rc3-wwd-default #4 Tainted: G           O
[  327.694882] -------------------------------------------------------
[  327.695385] tipc-config/5825 is trying to acquire lock:
[  327.695754]  (((timer))#2){+.-...}, at: [<ffffffff8105be80>] del_timer_sync+0x0/0xd0
[  327.696018]
[  327.696018] but task is already holding lock:
[  327.696018]  (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>] bearer_disable+  0xdd/0x120 [tipc]
[  327.696018]
[  327.696018] which lock already depends on the new lock.
[  327.696018]
[  327.696018]
[  327.696018] the existing dependency chain (in reverse order) is:
[  327.696018]
[  327.696018] -> #1 (&(&b_ptr->lock)->rlock){+.-...}:
[  327.696018]        [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870
[  327.696018]        [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670
[  327.696018]        [<ffffffff810b4453>] lock_acquire+0x103/0x130
[  327.696018]        [<ffffffff814d65b1>] _raw_spin_lock_bh+0x41/0x80
[  327.696018]        [<ffffffffa02c5d48>] disc_timeout+0x18/0xd0 [tipc]
[  327.696018]        [<ffffffff8105b92a>] call_timer_fn+0xda/0x1e0
[  327.696018]        [<ffffffff8105bcd7>] run_timer_softirq+0x2a7/0x2d0
[  327.696018]        [<ffffffff8105379a>] __do_softirq+0x16a/0x2e0
[  327.696018]        [<ffffffff81053a35>] irq_exit+0xd5/0xe0
[  327.696018]        [<ffffffff81033005>] smp_apic_timer_interrupt+0x45/0x60
[  327.696018]        [<ffffffff814df4af>] apic_timer_interrupt+0x6f/0x80
[  327.696018]        [<ffffffff8100b70e>] arch_cpu_idle+0x1e/0x30
[  327.696018]        [<ffffffff810a039d>] cpu_idle_loop+0x1fd/0x280
[  327.696018]        [<ffffffff810a043e>] cpu_startup_entry+0x1e/0x20
[  327.696018]        [<ffffffff81031589>] start_secondary+0x89/0x90
[  327.696018]
[  327.696018] -> #0 (((timer))#2){+.-...}:
[  327.696018]        [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0
[  327.696018]        [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870
[  327.696018]        [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670
[  327.696018]        [<ffffffff810b4453>] lock_acquire+0x103/0x130
[  327.696018]        [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0
[  327.696018]        [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc]
[  327.696018]        [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc]
[  327.696018]        [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc]
[  327.696018]        [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc]
[  327.696018]        [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc]
[  327.696018]        [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340
[  327.696018]        [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0
[  327.696018]        [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0
[  327.696018]        [<ffffffff8143e617>] genl_rcv+0x27/0x40
[  327.696018]        [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0
[  327.696018]        [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400
[  327.696018]        [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80
[  327.696018]        [<ffffffff813f7957>] sock_aio_write+0x107/0x120
[  327.696018]        [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0
[  327.696018]        [<ffffffff8117fc56>] vfs_write+0x186/0x190
[  327.696018]        [<ffffffff811803e0>] SyS_write+0x60/0xb0
[  327.696018]        [<ffffffff814de852>] system_call_fastpath+0x16/0x1b
[  327.696018]
[  327.696018] other info that might help us debug this:
[  327.696018]
[  327.696018]  Possible unsafe locking scenario:
[  327.696018]
[  327.696018]        CPU0                    CPU1
[  327.696018]        ----                    ----
[  327.696018]   lock(&(&b_ptr->lock)->rlock);
[  327.696018]                                lock(((timer))#2);
[  327.696018]                                lock(&(&b_ptr->lock)->rlock);
[  327.696018]   lock(((timer))#2);
[  327.696018]
[  327.696018]  *** DEADLOCK ***
[  327.696018]
[  327.696018] 5 locks held by tipc-config/5825:
[  327.696018]  #0:  (cb_lock){++++++}, at: [<ffffffff8143e608>] genl_rcv+0x18/0x40
[  327.696018]  #1:  (genl_mutex){+.+.+.}, at: [<ffffffff8143ed66>] genl_rcv_msg+0xa6/0xd0
[  327.696018]  #2:  (config_mutex){+.+.+.}, at: [<ffffffffa02bf889>] tipc_cfg_do_cmd+0x39/ 0x550 [tipc]
[  327.696018]  #3:  (tipc_net_lock){++.-..}, at: [<ffffffffa02be738>] tipc_disable_bearer+ 0x18/0x60 [tipc]
[  327.696018]  #4:  (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>]             bearer_disable+0xdd/0x120 [tipc]
[  327.696018]
[  327.696018] stack backtrace:
[  327.696018] CPU: 2 PID: 5825 Comm: tipc-config Tainted: G           O 3.11.0-rc3-wwd-    default #4
[  327.696018] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[  327.696018]  00000000ffffffff ffff880037fa77a8 ffffffff814d03dd 0000000000000000
[  327.696018]  ffff880037fa7808 ffff880037fa77e8 ffffffff810b1c4f 0000000037fa77e8
[  327.696018]  ffff880037fa7808 ffff880037e4db40 0000000000000000 ffff880037e4e318
[  327.696018] Call Trace:
[  327.696018]  [<ffffffff814d03dd>] dump_stack+0x4d/0xa0
[  327.696018]  [<ffffffff810b1c4f>] print_circular_bug+0x10f/0x120
[  327.696018]  [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0
[  327.696018]  [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870
[  327.696018]  [<ffffffff81087a28>] ? sched_clock_cpu+0xd8/0x110
[  327.696018]  [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670
[  327.696018]  [<ffffffff810b4453>] lock_acquire+0x103/0x130
[  327.696018]  [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70
[  327.696018]  [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0
[  327.696018]  [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70
[  327.696018]  [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc]
[  327.696018]  [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc]
[  327.696018]  [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc]
[  327.696018]  [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc]
[  327.696018]  [<ffffffff81218783>] ? security_capable+0x13/0x20
[  327.696018]  [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc]
[  327.696018]  [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340
[  327.696018]  [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0
[  327.696018]  [<ffffffff8143ecc0>] ? genl_lock+0x20/0x20
[  327.696018]  [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0
[  327.696018]  [<ffffffff8143e608>] ? genl_rcv+0x18/0x40
[  327.696018]  [<ffffffff8143e617>] genl_rcv+0x27/0x40
[  327.696018]  [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0
[  327.696018]  [<ffffffff81289d7c>] ? memcpy_fromiovec+0x6c/0x90
[  327.696018]  [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400
[  327.696018]  [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80
[  327.696018]  [<ffffffff813f7957>] sock_aio_write+0x107/0x120
[  327.696018]  [<ffffffff813fe29c>] ? release_sock+0x8c/0xa0
[  327.696018]  [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0
[  327.696018]  [<ffffffff8117fa24>] ? rw_verify_area+0x54/0x100
[  327.696018]  [<ffffffff8117fc56>] vfs_write+0x186/0x190
[  327.696018]  [<ffffffff811803e0>] SyS_write+0x60/0xb0
[  327.696018]  [<ffffffff814de852>] system_call_fastpath+0x16/0x1b

-----------------------------------------------------------------------

The problem is that the tipc_link_delete() will cancel the timer disc_timeout() when
the b_ptr->lock is hold, but the disc_timeout() still call b_ptr->lock to finish the
work, so the dead lock occurs.

We should unlock the b_ptr->lock when del the disc_timeout().

Remove link_timeout() still met the same problem, the patch:

http://article.gmane.org/gmane.network.tipc.general/4380

fix the problem, so no need to send patch for fix link_timeout() deadlock warming.
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix possibly wrong memcpy() bytes length since some CAN records received from
PCAN-USB could define a DLC field in range [9..15].
In that case, the real DLC value MUST be used to move forward the record pointer
but, only 8 bytes max. MUST be copied into the data field of the struct
can_frame object of the skb given to the network core.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit ac4e4af1 ("macvtap: Consistently use rcu functions"),
Thomas gets two different warnings :

BUG: using smp_processor_id() in preemptible [00000000] code: vhost-45891/45892
caller is macvtap_do_read+0x45c/0x600 [macvtap]
CPU: 1 PID: 45892 Comm: vhost-45891 Not tainted 3.11.0-bisecttest #13
Call Trace:
([<00000000001126ee>] show_trace+0x126/0x144)
 [<00000000001127d2>] show_stack+0xc6/0xd4
 [<000000000068bcec>] dump_stack+0x74/0xd8
 [<0000000000481066>] debug_smp_processor_id+0xf6/0x114
 [<000003ff802e9a18>] macvtap_do_read+0x45c/0x600 [macvtap]
 [<000003ff802e9c1c>] macvtap_recvmsg+0x60/0x88 [macvtap]
 [<000003ff80318c5e>] handle_rx+0x5b2/0x800 [vhost_net]
 [<000003ff8028f77c>] vhost_worker+0x15c/0x1c4 [vhost]
 [<000000000015f3ac>] kthread+0xd8/0xe4
 [<00000000006934a6>] kernel_thread_starter+0x6/0xc
 [<00000000006934a0>] kernel_thread_starter+0x0/0xc

And

BUG: using smp_processor_id() in preemptible [00000000] code: vhost-45897/45898
caller is macvlan_start_xmit+0x10a/0x1b4 [macvlan]
CPU: 1 PID: 45898 Comm: vhost-45897 Not tainted 3.11.0-bisecttest #16
Call Trace:
([<00000000001126ee>] show_trace+0x126/0x144)
 [<00000000001127d2>] show_stack+0xc6/0xd4
 [<000000000068bdb8>] dump_stack+0x74/0xd4
 [<0000000000481132>] debug_smp_processor_id+0xf6/0x114
 [<000003ff802b72ca>] macvlan_start_xmit+0x10a/0x1b4 [macvlan]
 [<000003ff802ea69a>] macvtap_get_user+0x982/0xbc4 [macvtap]
 [<000003ff802ea92a>] macvtap_sendmsg+0x4e/0x60 [macvtap]
 [<000003ff8031947c>] handle_tx+0x494/0x5ec [vhost_net]
 [<000003ff8028f77c>] vhost_worker+0x15c/0x1c4 [vhost]
 [<000000000015f3ac>] kthread+0xd8/0xe4
 [<000000000069356e>] kernel_thread_starter+0x6/0xc
 [<0000000000693568>] kernel_thread_starter+0x0/0xc
2 locks held by vhost-45897/45898:
 #0:  (&vq->mutex){+.+.+.}, at: [<000003ff8031903c>] handle_tx+0x54/0x5ec [vhost_net]
 #1:  (rcu_read_lock){.+.+..}, at: [<000003ff802ea53c>] macvtap_get_user+0x824/0xbc4 [macvtap]

In the first case, macvtap_put_user() calls macvlan_count_rx()
in a preempt-able context, and this is not allowed.

In the second case, macvtap_get_user() calls
macvlan_start_xmit() with BH enabled, and this is not allowed.
Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Bisected-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Included change:
- reassign pointers to data after skb reallocation to avoid kernel paging errors
Signed-off-by: David S. Miller <davem@davemloft.net>

There are several functions which might reallocate skb data. Currently
some places keep reusing their old ethhdr pointer regardless of whether
they became invalid after such a reallocation or not. This potentially
leads to kernel paging errors.

This patch fixes these by refetching the ethdr pointer after the
potential reallocations.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

Pablo Neira Ayuso says:

====================
The following patchset contains four netfilter fixes, they are:

* Fix possible invalid access and mangling of the TCPMSS option in
  xt_TCPMSS. This was spotted by Julian Anastasov.

* Fix possible off by one access and mangling of the TCP packet in
  xt_TCPOPTSTRIP, also spotted by Julian Anastasov.

* Fix possible information leak due to missing initialization of one
  padding field of several structures that are included in nfqueue and
  nflog netlink messages, from Dan Carpenter.

* Fix TCP window tracking with Fast Open, from Yuchung Cheng.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the conntrack checks if the ending sequence of a packet
falls within the observed receive window. However it does so even
if it has not observe any packet from the remote yet and uses an
uninitialized receive window (td_maxwin).

If a connection uses Fast Open to send a SYN-data packet which is
dropped afterward in the network. The subsequent SYNs retransmits
will all fail this check and be discarded, leading to a connection
timeout. This is because the SYN retransmit does not contain data
payload so

end == initial sequence number (isn) + 1
sender->td_end == isn + syn_data_len
receiver->td_maxwin == 0

The fix is to only apply this check after td_maxwin is initialized.
Reported-by: Michael Chan <mcfchan@stanford.edu>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Fix inverted check when deleting an fdb entry.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixed the condition of extend_desc for jumbo frame.
There is no check routine for extend_desc in the stmmac_jumbo_frm function.
Even though extend_desc is set if dma_tx is used instead of dma_etx.
It causes kernel panic.
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a regression introduced by:

	commit fe5c3561
	Author: stephen hemminger <stephen@networkplumber.org>
	Date:   Sat Jul 13 10:18:18 2013 -0700

	    vxlan: add necessary locking on device removal

The problem is that vxlan_dellink(), which is called with RTNL lock
held, tries to flush the workqueue synchronously, but apparently
igmp_join and igmp_leave work need to hold RTNL lock too, therefore we
have a soft lockup!

As suggested by Stephen, probably the flush_workqueue can just be
removed and let the normal refcounting work. The workqueue has a
reference to device and socket, therefore the cleanups should work
correctly.
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Tested-by: Cong Wang <amwang@redhat.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a regression introduced by:

	commit 3fc2de2f
	Author: stephen hemminger <stephen@networkplumber.org>
	Date:   Thu Jul 18 08:40:15 2013 -0700

	    vxlan: fix igmp races

Before this commit, the old code was:

       if (vxlan_group_used(vn, vxlan->default_dst.remote_ip))
               ip_mc_join_group(sk, &mreq);
       else
               ip_mc_leave_group(sk, &mreq);

therefore we shoud check vxlan_group_used(), not its opposite,
for igmp_join.

Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename mib counter from "low latency" to "busy poll"

v1 also moved the counter to the ip MIB (suggested by Shawn Bohrer)
Eric Dumazet suggested that the current location is better.

So v2 just renames the counter to fit the new naming convention.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduced in cf3c4c03
("8139cp: Add dma_mapping_error checking")
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Same behavior than 802.1q : finds the encapsulated protocol and
skip 32bit header.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>