- 19 May, 2014 40 commits
-
-
Vikas Chaudhary authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Adheer Chandravanshi authored
Signed-off-by:
-
Adheer Chandravanshi authored
Fix following smatch warning:- drivers/scsi/qla4xxx/ql4_os.c:1752 qla4xxx_get_ep_param() warn: variable dereferenced before check 'qla_ep' (see line 1745) Signed-off-by:
-
Nilesh Javali authored
Signed-off-by:
-
Nilesh Javali authored
Issue: modprobe qla4xxx is killed by systemd due to timeout. Solution: The exporting of sysfs DDBs from qla4xxx_probe_adapter added delay of approximately 15s due to which system-udevd killed the modprobe of the driver. Added fix to export the sysfs DDBs from the DPC handler. Signed-off-by:
Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by:
-
Tej Parkash authored
Signed-off-by:
Tej Parkash <tej.parkash@qlogic.com> Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
-
Vikas Chaudhary authored
Use correct goto statement to free dma memory in case of failure in function qla4_84xx_config_acb() Signed-off-by:
-
Vikas Chaudhary authored
Issue: System crash while target discovery for ISP40XX Root cause: Function qla4xxx_init_rings() is not called for ISP40XX Fix: Call function qla4xxx_init_rings() for ISP40XX from qla4xxx_start_firmware(). Signed-off-by:
-
Vikas Chaudhary authored
Check for correct return status in function - qla4_8xxx_minidump_pex_dma_read Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
-
Tej Parkash authored
Signed-off-by:
-
Tej Parkash authored
Updated driver with new opcode (RDDFE, RDMDIO and POLLWR) which are added with latest firmware minidump template Signed-off-by:
-
Tej Parkash authored
Signed-off-by:
-
Tej Parkash authored
Signed-off-by:
-
Tej Parkash authored
Problem: iSCSI stop_firmware mailbox command is not completing outstanding IO. Solution: Do not wait for IO completion after issuing stop_firmware mailbox command Signed-off-by:
-
Nathan Fontenot authored
Update the MAINTAINERS file to indicate the current maintainers for the IBM Power 842 Compression driver, IBM Power Virtual SCSI driver and the IBM Power Virtual FC Driver. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Acked-by:
Robert Jennings <rob@pochix.net> Signed-off-by:
-
Shlomo Pongratz authored
Commit 659743b0 "[SCSI] libiscsi: Reduce locking contention in fast path" introduced a new smatch warning on libiscsi.c "iscsi_xmit_task() warn: inconsistent returns bottom_half:: locked (1410 [(-61)]) unlocked (1425 [0], 1425 [s32min-(-1),1-s32max])", which we can eliminate by using non bh locking on the nested spin_lock call. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
-
Hiral Shah authored
Fnic Ctlr Path Trace utility is a tracing functionality built directly into fnic driver to trace the control path frames like discovery, FLOGI request/reply, PLOGI request/reply, link event etc. It will be one trace file for all fnics. It will help us to debug and resolve the discovery and initialization related issues in more convenient way. This trace information includes time stamp, Host Number, Frame type, Frame Length and Frame. By default,64 pages are allocated but we can change the number of allocated pages by module parameter fnic_fc_trace_max_page. Each entry is of 256 byte and available entries are depends on allocated number of pages. We can turn on or off the fnic control path trace functionality by module paramter fc_trace_enable and/or reset the trace contain by module paramter fc_trace_clear. Signed-off-by:
Hiral Shah <hishah@cisco.com> Signed-off-by:
Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by:
-
Hiral Shah authored
In fnic abort handler, abort queuing can be failed when hardware queue is full. The command state is left as abort queued. The command with abort queued state will never be queued next time for abort or termiantion. Fix restores the command state in above case. Signed-off-by:
Narsimhulu Musini <nmusini@cisco.com> Signed-off-by:
-
Hiral Shah authored
This patch contains following three minor fixes. 1) During Probe, fnic was sending FIP solicitation in Non FIP mode which is not expected, setting the internal fip state to Non FIP mode explicitly, avoids sending FIP frame. 2) When target goes offline, all outstanding IOs belong to the target will be terminated by driver, If the termination count is high, then it influences firmware responsiveness. To improve the responsiveness, default IO throttle count is reduced to 256. 3) Accessing Virtual Fabric Id (vfid) and fc_map of Fibre-Channel Forwarder(FCF) is invalid in fnic driver when Clear Virtual Link(CVL) is received prior to receiving flogi reject from switch. As CVL clears all FCFs. Signed-off-by:
Anantha Tungarakodi <atungara@cisco.com> Signed-off-by:
-
Saurav Kashyap authored
Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
-
Chad Dupuis authored
This can block progress of the SCSI error handler thread and cause long I/O outages. Instead just fail immediately if another reset is going on or we are accessing flash memory. Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
-
Chad Dupuis authored
Attempting to do any logins from the SCSI reset handler can lead to a deadlock scenario if a rport times out and the FC transport layer. Move doing any port logins to the DPC thread so as not to impede the progress of the SCSI error handler thread and avoid deadlock situations. Signed-off-by:
-
Quinn Tran authored
Fix double free problem within qla2xxx driver where current code prematurely free qla_tgt_cmd while firmware still has the command. When firmware release the command after abort, the code attempt a second free as part of command completion processing. When TCM start the free process, NULL pointer was hit. ------ WARNING: CPU: 8 PID: 43613 at lib/list_debug.c:62 __list_del_entry+0x82/0xd0() list_del corruption. next->prev should be ffff88082b5cfb08, but was 6b6b6b6b6b6b6b6b CPU: 8 PID: 43613 Comm: kworker/8:0 Tainted: GF W O 3.13.0-rc3-nab_t10dif+ #6 Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 Workqueue: events cache_reap 000000000000003e ffff88081b2e3c78 ffffffff815a051f 000000000000003e ffff88081b2e3cc8 ffff88081b2e3cb8 ffffffff8104fc2c 0000000000000000 ffff88082b5cfb00 ffff88081c788d00 ffff88082b5d7200 ffff88082b5d3080 Call Trace: [<ffffffff815a051f>] dump_stack+0x49/0x62 [<ffffffff8104fc2c>] warn_slowpath_common+0x8c/0xc0 [<ffffffff8104fd16>] warn_slowpath_fmt+0x46/0x50 [<ffffffff812b6592>] __list_del_entry+0x82/0xd0 [<ffffffff8106d48c>] process_one_work+0x12c/0x510 [<ffffffff8106d4d3>] ? process_one_work+0x173/0x510 [<ffffffff8106ebdf>] worker_thread+0x11f/0x3a0 [<ffffffff8106eac0>] ? manage_workers+0x170/0x170 [<ffffffff81074f26>] kthread+0xf6/0x120 [<ffffffff8109f103>] ? __lock_release+0x133/0x1b0 [<ffffffff81074e30>] ? __init_kthread_worker+0x70/0x70 [<ffffffff815aec2c>] ret_from_fork+0x7c/0xb0 [<ffffffff81074e30>] ? __init_kthread_worker+0x70/0x70 ---[ end trace dfc05c3f7caf8ebe ]--- BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff8106d391>] process_one_work+0x31/0x510 ------- Signed-off-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
-
Quinn Tran authored
Add support for T10-Dif for Target Mode to qla driver. The driver will look for firmware attribute that support this feature. When the feature is present, the capabilities will be report to TCM layer. Add CTIO CRC2 iocb to build T10-Dif commands. Add support routines to process good & error cases. Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Himanshu Madhani authored
Signed-off-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by:
-
Himanshu Madani authored
Signed-off-by:
Himanshu Madani <himanshu.madani@qlogic.com> Signed-off-by:
-
Tej Prakash authored
Signed-off-by:
Tej Prakash <tej.prakash@qlogic.com> Signed-off-by:
-
Sawan Chandak authored
Signed-off-by:
Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by:
-
Joe Carnuccio authored
For ISP27xx use the request/response queue index shadow registers to avoid directly access them on the PCI bus. Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Hiral Patel authored
Signed-off-by:
Hiral Patel <hiral.patel@qlogic.com> Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Armen Baloyan authored
Signed-off-by:
Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by:
-
Chad Dupuis authored
If the firmware cannot find the command specified then return SUCCESS to the error handler so as not to needlessly escalate. Also cleanup the resources for the command since we cannot expect the original command to returned in interrupt context. Signed-off-by:
-
Atul Deshmukh authored
Signed-off-by:
Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
-
