- 31 Jan, 2020 3 commits
-
-
Tom Zanussi authored
The synth_event trace code contains some almost identical functions and some small functions that are called only once - consolidate the common code into single functions and fold in the small functions to simplify the code overall. Link: http://lkml.kernel.org/r/d1c8d8ad124a653b7543afe801d38c199ca5c20e.1580506712.git.zanussi@kernel.orgSigned-off-by:
Tom Zanussi <zanussi@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
The patch 'tracing: Fix histogram code when expression has same var as value' added code to return an existing variable reference when creating a new variable reference, which resulted in var_ref_vals slots being reused instead of being duplicated. The implementation of the trace action assumes that the end of the var_ref_vals array starting at action_data.var_ref_idx corresponds to the values that will be assigned to the trace params. The patch mentioned above invalidates that assumption, which means that each param needs to explicitly specify its index into var_ref_vals. This fix changes action_data.var_ref_idx to an array of var ref indexes to account for that. Link: https://lore.kernel.org/r/1580335695.6220.8.camel@kernel.org Fixes: 8bcebc77 ("tracing: Fix histogram code when expression has same var as value") Signed-off-by:
-
Tom Zanussi authored
Have trace_boot_add_synth_event() use the synth_event interface. Also, rename synth_event_run_cmd() to synth_event_run_command() now that trace_boot's version is gone. Link: http://lkml.kernel.org/r/94f1fa0e31846d0bddca916b8663404b20559e34.1580323897.git.zanussi@kernel.orgAcked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
-
- 30 Jan, 2020 19 commits
-
-
Steven Rostedt (VMware) authored
Move all the tracing selftest configs to the bottom of the tracing menu. There's no reason for them to be interspersed throughout. Also, move the bootconfig menu to the top. Signed-off-by: -
Steven Rostedt (VMware) authored
Move the config that enables the mmiotracer with the other tracers such that all the tracers are together. Signed-off-by: -
Steven Rostedt (VMware) authored
The MMIO test module was by itself, move it to the other test modules. Also, add the text "Test module" to PREEMPTIRQ_DELAY_TEST as that create a test module as well. Signed-off-by: -
Steven Rostedt (VMware) authored
The features that depend on the function tracer were spread out through the tracing menu, pull them together as it is easier to manage. Signed-off-by: -
Tom Zanussi authored
Add Documentation for creating and generating synthetic events from modules. Link: http://lkml.kernel.org/r/734bf8789ff8700000c9acde61a553427910ddb5.1580323897.git.zanussi@kernel.orgAcked-by:
-
Tom Zanussi authored
Add a test module that checks the basic functionality of the in-kernel kprobe event command generation API by creating kprobe events from a module. Link: http://lkml.kernel.org/r/97e502b204f9dba948e3fa3a4315448298218787.1580323897.git.zanussi@kernel.orgAcked-by:
-
Tom Zanussi authored
Have trace_boot_add_kprobe_event() use the kprobe_event interface. Also, rename kprobe_event_run_cmd() to kprobe_event_run_command() now that trace_boot's version is gone. Link: http://lkml.kernel.org/r/af5429d11291ab1e9a85a0ff944af3b2bcf193c7.1580323897.git.zanussi@kernel.orgAcked-by:
-
Tom Zanussi authored
Add functions used to generate kprobe event commands, built on top of the dynevent_cmd interface. kprobe_event_gen_cmd_start() is used to create a kprobe event command using a variable arg list, and kretprobe_event_gen_cmd_start() does the same for kretprobe event commands. kprobe_event_add_fields() can be used to add single fields one by one or as a group. Once all desired fields are added, kprobe_event_gen_cmd_end() or kretprobe_event_gen_cmd_end() respectively are used to actually execute the command and create the event. Link: http://lkml.kernel.org/r/95cc4696502bb6017f9126f306a45ad19b4cc14f.1580323897.git.zanussi@kernel.orgAcked-by:
-
Tom Zanussi authored
Add a test module that checks the basic functionality of the in-kernel synthetic event generation API by generating and tracing synthetic events from a module. Link: http://lkml.kernel.org/r/fcb4dd9eb9eefb70ab20538d3529d51642389664.1580323897.git.zanussi@kernel.orgAcked-by:
-
Tom Zanussi authored
Add an exported function named synth_event_trace(), allowing modules or other kernel code to trace synthetic events. Also added are several functions that allow the same functionality to be broken out in a piecewise fashion, which are useful in situations where tracing an event from a full array of values would be cumbersome. Those functions are synth_event_trace_start/end() and synth_event_add_(next)_val(). Link: http://lkml.kernel.org/r/7a84de5f1854acf4144b57efe835ca645afa764f.1580323897.git.zanussi@kernel.orgAcked-by:
-
Tom Zanussi authored
Add functions used to generate synthetic event commands, built on top of the dynevent_cmd interface. synth_event_gen_cmd_start() is used to create a synthetic event command using a variable arg list and synth_event_gen_cmd_array_start() does the same thing but using an array of field descriptors. synth_event_add_field(), synth_event_add_field_str() and synth_event_add_fields() can be used to add single fields one by one or as a group. Once all desired fields are added, synth_event_gen_cmd_end() is used to actually execute the command and create the event. synth_event_create() does everything, including creating the event, in a single call. Link: http://lkml.kernel.org/r/38fef702fad5ef208009f459552f34a94befd860.1580323897.git.zanussi@kernel.orgAcked-by:
-
Tom Zanussi authored
Add an interface used to build up dynamic event creation commands, such as synthetic and kprobe events. Interfaces specific to those particular types of events and others can be built on top of this interface. Command creation is started by first using the dynevent_cmd_init() function to initialize the dynevent_cmd object. Following that, args are appended and optionally checked by the dynevent_arg_add() and dynevent_arg_pair_add() functions, which use objects representing arguments and pairs of arguments, initialized respectively by dynevent_arg_init() and dynevent_arg_pair_init(). Finally, once all args have been successfully added, the command is finalized and actually created using dynevent_create(). The code here for actually printing into the dyn_event->cmd buffer using snprintf() etc was adapted from v4 of Masami's 'tracing/boot: Add synthetic event support' patch. Link: http://lkml.kernel.org/r/1f65fa44390b6f238f6036777c3784ced1dcc6a0.1580323897.git.zanussi@kernel.orgSigned-off-by:
-
Tom Zanussi authored
create_or_delete_synth_event() contains code to delete a synthetic event, which would be useful on its own - specifically, it would be useful to allow event-creating modules to call it separately. Separate out the delete code from that function and create an exported function named synth_event_delete(). Link: http://lkml.kernel.org/r/050db3b06df7f0a4b8a2922da602d1d879c7c1c2.1580323897.git.zanussi@kernel.orgAcked-by:
-
Tom Zanussi authored
Add a function to get an event file and prevent it from going away on module or instance removal. trace_get_event_file() will find an event file in a given instance (if instance is NULL, it assumes the top trace array) and return it, pinning the instance's trace array as well as the event's module, if applicable, so they won't go away while in use. trace_put_event_file() does the matching release. Link: http://lkml.kernel.org/r/bb31ac4bdda168d5ed3c4b5f5a4c8f633e8d9118.1580323897.git.zanussi@kernel.orgAcked-by:
-
Tom Zanussi authored
Add a new trace_array_find() function that can be used to find a trace array given the instance name, and replace existing code that does the same thing with it. Also add trace_array_find_get() which does the same but returns the trace array after upping its refcount. Also make both available for use outside of trace.c. Link: http://lkml.kernel.org/r/cb68528c975eba95bee4561ac67dd1499423b2e5.1580323897.git.zanussi@kernel.orgAcked-by:
-
Vasily Averin authored
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Without patch: # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist # Available triggers: # traceon traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist 6+1 records in 6+1 records out 206 bytes copied, 0.00027916 s, 738 kB/s Notice the printing of "# Available triggers:..." after the line. With the patch: # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist 2+1 records in 2+1 records out 88 bytes copied, 0.000526867 s, 167 kB/s It only prints the end of the file, and does not restart. Link: http://lkml.kernel.org/r/3c35ee24-dd3a-8119-9c19-552ed253388a@virtuozzo.com https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Vasily Averin authored
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Link: http://lkml.kernel.org/r/7ad85b22-1866-977c-db17-88ac438bc764@virtuozzo.comSigned-off-by:
-
Vasily Averin authored
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Without patch: # dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset id no pid 2+1 records in 2+1 records out 10 bytes copied, 0.000213285 s, 46.9 kB/s Notice the "id" followed by "no pid". With the patch: # dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset id 0+1 records in 0+1 records out 3 bytes copied, 0.000202112 s, 14.8 kB/s Notice that it only prints "id" and not the "no pid" afterward. Link: http://lkml.kernel.org/r/4f87c6ad-f114-30bb-8506-c32274ce2992@virtuozzo.com https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
-
Mathieu Desnoyers authored
Reading the sched_cmdline_ref and sched_tgid_ref initial state within tracing_start_sched_switch without holding the sched_register_mutex is racy against concurrent updates, which can lead to tracepoint probes being registered more than once (and thus trigger warnings within tracepoint.c). [ May be the fix for this bug ] Link: https://lore.kernel.org/r/000000000000ab6f84056c786b93@google.com Link: http://lkml.kernel.org/r/20190817141208.15226-1-mathieu.desnoyers@efficios.com Cc: stable@vger.kernel.org CC: Steven Rostedt (VMware) <rostedt@goodmis.org> CC: Joel Fernandes (Google) <joel@joelfernandes.org> CC: Peter Zijlstra <peterz@infradead.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Paul E. McKenney <paulmck@linux.ibm.com> Reported-by: syzbot+774fddf07b7ab29a1e55@syzkaller.appspotmail.com Fixes: d914ba37 ("tracing: Add support for recording tgid of tasks") Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
- 29 Jan, 2020 7 commits
-
-
Masami Hiramatsu authored
Move external function declarations into kernel/trace/trace.h from trace_boot.c for tracing subsystem internal use. Link: http://lkml.kernel.org/r/158029060405.12381.11944554430359702545.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Include some required (but currently indirectly included) headers and sort it alphabetically. Link: http://lkml.kernel.org/r/158029059514.12381.6597832266860248781.stgit@devnote2Signed-off-by:
-
Tom Zanussi authored
Add a testcase ensuring that the tracing error_log correctly displays hist trigger parsing errors. Link: http://lkml.kernel.org/r/62ec58d9aca661cde46ba678e32a938427945e9e.1561743018.git.zanussi@kernel.orgReviewed-by:
-
Tom Zanussi authored
The 'hist:' prefix gets stripped from the command text during command processing, but should be added back when displaying the command during error processing. Not only because it's what should be displayed but also because not having it means the test cases fail because the caret is miscalculated by the length of the prefix string. Link: http://lkml.kernel.org/r/449df721f560042e22382f67574bcc5b4d830d3d.1561743018.git.zanussi@kernel.orgReviewed-by:
-
Tom Zanussi authored
Add error codes and messages for all the error paths leading to sort specification parsing errors. Link: http://lkml.kernel.org/r/237830dc05e583fbb53664d817a784297bf961be.1561743018.git.zanussi@kernel.orgReviewed-by:
-
Tom Zanussi authored
In the process of adding better error messages for sorting, I realized that strsep was being used incorrectly and some of the error paths I was expecting to be hit weren't and just fell through to the common invalid key error case. It also became obvious that for keyword assignments, it wasn't necessary to save the full assignment and reparse it later, and having a common empty-assignment check would also make more sense in terms of error processing. Change the code to fix these problems and simplify it for new error message changes in a subsequent patch. Link: http://lkml.kernel.org/r/1c3ef0b6655deaf345f6faee2584a0298ac2d743.1561743018.git.zanussi@kernel.org Fixes: e62347d2 ("tracing: Add hist trigger support for user-defined sorting ('sort=' param)") Fixes: 7ef224d1 ("tracing: Add 'hist' event trigger command") Fixes: a4072fe8 ("tracing: Add a clock attribute for hist triggers") Reported-by:
-
Mauro Carvalho Chehab authored
Sphinx warnings about his: Documentation/trace/kprobetrace.rst:68: WARNING: undefined label: user_mem_access (if the link has no caption the label must precede a section header) The problem is quite simple: Sphinx wants a blank line after references. Link: http://lkml.kernel.org/r/a83ea390bc28784518fce772b4c961ea1c976f14.1560883872.git.mchehab+samsung@kernel.orgAcked-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
- 25 Jan, 2020 2 commits
-
-
Steven Rostedt (VMware) authored
As warnings can trigger panics, especially when "panic_on_warn" is set, memory failure warnings can cause panics and fail fuzz testers that are stressing memory. Create a MEM_FAIL() macro to use instead of WARN() in the tracing code (perhaps this should be a kernel wide macro?), and use that for memory failure issues. This should stop failing fuzz tests due to warnings. Link: https://lore.kernel.org/r/CACT4Y+ZP-7np20GVRu3p+eZys9GPtbu+JpfV+HtsufAzvTgJrg@mail.gmail.comSuggested-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
The trace_array_get_by_name() creates a ftrace instance and trace_array_put() is used to remove the reference. Even though the trace_array_get_by_name() creates the instance, it also adds a reference count to it, that prevents user space from removing it. As the bootconfig just creates the instance on boot up, it should still be used where it can be deleted by user space after boot. A trace_array_put() is required to let that happen. Also, change the documentation on trace_array_get_by_name() to make this not be so confusing. Link: https://lore.kernel.org/r/20200124205927.76128804@rorschach.local.home Fixes: 4f712a4d ("tracing/boot: Add instance node support") Acked-by:
-
- 24 Jan, 2020 5 commits
-
-
Hou Pengyang authored
commit f42c85e7 moved tracepoint's ftrace creation into include/trace/ftrace.h and trace/define_trace.h was deleted as a result. However some comment info does not adapt to the change, which is such a misguiding when reading related code. This patch fix this by moving trace/trace_events.h to <trace/events/XXX.h>, since tracepoint headers have already been moved to tarce/events/. Link: http://lkml.kernel.org/r/1425419298-61941-1-git-send-email-houpengyang@huawei.comSigned-off-by:
Hou Pengyang <houpengyang@huawei.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
-
Dan Carpenter authored
We checked "iter->trace" earlier so there is no need to check here. Link: http://lkml.kernel.org/r/20141122183012.GB6994@mwandaSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
-
Josef Bacik authored
I noticed when trying to use the trace-cmd python interface that reading the raw buffer wasn't working for kernel_stack events. This is because it uses a stubbed version of __dynamic_array that doesn't do the __data_loc trick and encode the length of the array into the field. Instead it just shows up as a size of 0. So change this to __array and set the len to FTRACE_STACK_ENTRIES since this is what we actually do in practice and matches how user_stack_trace works. Link: http://lkml.kernel.org/r/1411589652-1318-1-git-send-email-jbacik@fb.comSigned-off-by:
Josef Bacik <jbacik@fb.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
-
Luis Henriques authored
tracing_stat_init() was always returning '0', even on the error paths. It now returns -ENODEV if tracing_init_dentry() fails or -ENOMEM if it fails to created the 'trace_stat' debugfs directory. Link: http://lkml.kernel.org/r/1410299381-20108-1-git-send-email-luis.henriques@canonical.com Fixes: ed6f1c99 ("tracing: Check return value of tracing_init_dentry()") Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
-
Steven Rostedt (VMware) authored
Looking through old emails in my INBOX, I came across a patch from Luis Henriques that attempted to fix a race of two stat tracers registering the same stat trace (extremely unlikely, as this is done in the kernel, and probably doesn't even exist). The submitted patch wasn't quite right as it needed to deal with clean up a bit better (if two stat tracers were the same, it would have the same files). But to make the code cleaner, all we needed to do is to keep the all_stat_sessions_mutex held for most of the registering function. Link: http://lkml.kernel.org/r/1410299375-20068-1-git-send-email-luis.henriques@canonical.com Fixes: 002bb86d ("tracing/ftrace: separate events tracing and stats tracing engine") Reported-by:
-
- 22 Jan, 2020 2 commits
-
-
Alex Shi authored
This limitation are never lunched from introduce commit 970988e1 ("tracing/kprobe: Add kprobe_event= boot parameter") Could we remove it if no intention to implement it? Link: http://lkml.kernel.org/r/1579586075-45132-1-git-send-email-alex.shi@linux.alibaba.comAcked-by:
Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
If we exit due to a bad input to trace_printk() (highly unlikely), then the buffer variable will not be initialized when we unnest the ring buffer. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
- 21 Jan, 2020 2 commits
-
-
Dan Carpenter authored
The trace_array_get_by_name() function doesn't return error pointers, it returns NULL on error. Link: http://lkml.kernel.org/r/20200117053007.5h2juv272pokqhtq@kili.mountain Fixes: 4f712a4d ("tracing/boot: Add instance node support") Acked-by:
-
Alex Shi authored
This macro isn't used from commit 3a161d99 ("tracing: Create seq_buf layer in trace_seq"). so no needs to keep it. Link: http://lkml.kernel.org/r/1579586086-45543-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
