- 04 Aug, 2019 4 commits
-
-
Trond Myklebust authored
commit 5ceb9d7f upstream. Refactor the code in nfs_lookup_revalidate() as a stepping stone towards optimising and fixing nfs4_lookup_revalidate(). Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Qian Lu <luqia@amazon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit be189f7e upstream. We need to ensure that inode and dentry revalidation occurs correctly on reopen of a file that is already open. Currently, we can end up not revalidating either in the case of NFSv4.0, due to the 'cached open' path. Let's fix that by ensuring that we only do cached open for the special cases of open recovery and delegation return. Reported-by:
Stan Hu <stanhu@gmail.com> Signed-off-by:
-
Sunil Muthuswamy authored
commit d5afa82c upstream. The current vsock code for removal of socket from the list is both subject to race and inefficient. It takes the lock, checks whether the socket is in the list, drops the lock and if the socket was on the list, deletes it from the list. This is subject to race because as soon as the lock is dropped once it is checked for presence, that condition cannot be relied upon for any decision. It is also inefficient because if the socket is present in the list, it takes the lock twice. Signed-off-by:
Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sunil Muthuswamy authored
commit a9eeb998 upstream. Currently, hvsock does not implement any delayed or background close logic. Whenever the hvsock socket is closed, a FIN is sent to the peer, and the last reference to the socket is dropped, which leads to a call to .destruct where the socket can hang indefinitely waiting for the peer to close it's side. The can cause the user application to hang in the close() call. This change implements proper STREAM(TCP) closing handshake mechanism by sending the FIN to the peer and the waiting for the peer's FIN to arrive for a given timeout. On timeout, it will try to terminate the connection (i.e. a RST). This is in-line with other socket providers such as virtio. This change does not address the hang in the vmbus_hvsock_device_unregister where it waits indefinitely for the host to rescind the channel. That should be taken up as a separate fix. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
- 31 Jul, 2019 36 commits
-
-
Greg Kroah-Hartman authored
-
Linus Torvalds authored
commit d7852fbd upstream. It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU work because it installs a temporary credential that gets allocated and freed for each system call. The allocation and freeing overhead is mostly benign, but because credentials can be accessed under the RCU read lock, the freeing involves a RCU grace period. Which is not a huge deal normally, but if you have a lot of access() calls, this causes a fair amount of seconday damage: instead of having a nice alloc/free patterns that hits in hot per-CPU slab caches, you have all those delayed free's, and on big machines with hundreds of cores, the RCU overhead can end up being enormous. But it turns out that all of this is entirely unnecessary. Exactly because access() only installs the credential as the thread-local subjective credential, the temporary cred pointer doesn't actually need to be RCU free'd at all. Once we're done using it, we can just free it synchronously and avoid all the RCU overhead. So add a 'non_rcu' flag to 'struct cred', which can be set by users that know they only use it in non-RCU context (there are other potential users for this). We can make it a union with the rcu freeing list head that we need for the RCU case, so this doesn't need any extra storage. Note that this also makes 'get_current_cred()' clear the new non_rcu flag, in case we have filesystems that take a long-term reference to the cred and then expect the RCU delayed freeing afterwards. It's not entirely clear that this is required, but it makes for clear semantics: the subjective cred remains non-RCU as long as you only access it synchronously using the thread-local accessors, but you _can_ use it as a generic cred if you want to. It is possible that we should just remove the whole RCU markings for ->cred entirely. Only ->real_cred is really supposed to be accessed through RCU, and the long-term cred copies that nfs uses might want to explicitly re-enable RCU freeing if required, rather than have get_current_cred() do it implicitly. But this is a "minimal semantic changes" change for the immediate problem. Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Paul E. McKenney <paulmck@linux.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Glauber <jglauber@marvell.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com> Cc: Greg KH <greg@kroah.com> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Williams authored
commit b70d31d0 upstream. In preparation for fixing a deadlock between wait_for_bus_probe_idle() and the nvdimm_bus_list_mutex arrange for __nd_ioctl() without nvdimm_bus_list_mutex held. This also unifies the 'dimm' and 'bus' level ioctls into a common nd_ioctl() preamble implementation. Marked for -stable as it is a pre-requisite for a follow-on fix. Cc: <stable@vger.kernel.org> Fixes: bf9bccc1 ("libnvdimm: pmem label sets and namespace instantiation") Cc: Vishal Verma <vishal.l.verma@intel.com> Tested-by:
Jane Chu <jane.chu@oracle.com> Link: https://lore.kernel.org/r/156341209518.292348.7183897251740665198.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Michael Neuling authored
commit f16d80b7 upstream. On systems like P9 powernv where we have no TM (or P8 booted with ppc_tm=off), userspace can construct a signal context which still has the MSR TS bits set. The kernel tries to restore this context which results in the following crash: Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033 Oops: Unrecoverable exception, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ff #69 NIP: c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000 REGS: c00000003fffbd70 TRAP: 0700 Not tainted (5.2.0-11045-g7142b497d8) MSR: 8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]> CR: 42004242 XER: 00000000 CFAR: c0000000000022e0 IRQMASK: 0 GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669 GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000 GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420 GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000 GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000 GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728 NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80 LR [00007fffb2d67e48] 0x7fffb2d67e48 Call Trace: Instruction dump: e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00 e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18 The problem is the signal code assumes TM is enabled when CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as with P9 powernv or if `ppc_tm=off` is used on P8. This means any local user can crash the system. Fix the problem by returning a bad stack frame to the user if they try to set the MSR TS bits with sigreturn() on systems where TM is not supported. Found with sigfuz kernel selftest on P9. This fixes CVE-2019-13648. Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9 Reported-by:
Praveen Pandey <Praveen.Pandey@in.ibm.com> Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.orgSigned-off-by:
-
Gautham R. Shenoy authored
commit 4d202c8c upstream. xive_find_target_in_mask() has the following for(;;) loop which has a bug when @first == cpumask_first(@mask) and condition 1 fails to hold for every CPU in @mask. In this case we loop forever in the for-loop. first = cpu; for (;;) { if (cpu_online(cpu) && xive_try_pick_target(cpu)) // condition 1 return cpu; cpu = cpumask_next(cpu, mask); if (cpu == first) // condition 2 break; if (cpu >= nr_cpu_ids) // condition 3 cpu = cpumask_first(mask); } This is because, when @first == cpumask_first(@mask), we never hit the condition 2 (cpu == first) since prior to this check, we would have executed "cpu = cpumask_next(cpu, mask)" which will set the value of @cpu to a value greater than @first or to nr_cpus_ids. When this is coupled with the fact that condition 1 is not met, we will never exit this loop. This was discovered by the hard-lockup detector while running LTP test concurrently with SMT switch tests. watchdog: CPU 12 detected hard LOCKUP on other CPUs 68 watchdog: CPU 12 TB:85587019220796, last SMP heartbeat TB:85578827223399 (15999ms ago) watchdog: CPU 68 Hard LOCKUP watchdog: CPU 68 TB:85587019361273, last heartbeat TB:85576815065016 (19930ms ago) CPU: 68 PID: 45050 Comm: hxediag Kdump: loaded Not tainted 4.18.0-100.el8.ppc64le #1 NIP: c0000000006f5578 LR: c000000000cba9ec CTR: 0000000000000000 REGS: c000201fff3c7d80 TRAP: 0100 Not tainted (4.18.0-100.el8.ppc64le) MSR: 9000000002883033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 24028424 XER: 00000000 CFAR: c0000000006f558c IRQMASK: 1 GPR00: c0000000000afc58 c000201c01c43400 c0000000015ce500 c000201cae26ec18 GPR04: 0000000000000800 0000000000000540 0000000000000800 00000000000000f8 GPR08: 0000000000000020 00000000000000a8 0000000080000000 c00800001a1beed8 GPR12: c0000000000b1410 c000201fff7f4c00 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000540 0000000000000001 GPR20: 0000000000000048 0000000010110000 c00800001a1e3780 c000201cae26ed18 GPR24: 0000000000000000 c000201cae26ed8c 0000000000000001 c000000001116bc0 GPR28: c000000001601ee8 c000000001602494 c000201cae26ec18 000000000000001f NIP [c0000000006f5578] find_next_bit+0x38/0x90 LR [c000000000cba9ec] cpumask_next+0x2c/0x50 Call Trace: [c000201c01c43400] [c000201cae26ec18] 0xc000201cae26ec18 (unreliable) [c000201c01c43420] [c0000000000afc58] xive_find_target_in_mask+0x1b8/0x240 [c000201c01c43470] [c0000000000b0228] xive_pick_irq_target.isra.3+0x168/0x1f0 [c000201c01c435c0] [c0000000000b1470] xive_irq_startup+0x60/0x260 [c000201c01c43640] [c0000000001d8328] __irq_startup+0x58/0xf0 [c000201c01c43670] [c0000000001d844c] irq_startup+0x8c/0x1a0 [c000201c01c436b0] [c0000000001d57b0] __setup_irq+0x9f0/0xa90 [c000201c01c43760] [c0000000001d5aa0] request_threaded_irq+0x140/0x220 [c000201c01c437d0] [c00800001a17b3d4] bnx2x_nic_load+0x188c/0x3040 [bnx2x] [c000201c01c43950] [c00800001a187c44] bnx2x_self_test+0x1fc/0x1f70 [bnx2x] [c000201c01c43a90] [c000000000adc748] dev_ethtool+0x11d8/0x2cb0 [c000201c01c43b60] [c000000000b0b61c] dev_ioctl+0x5ac/0xa50 [c000201c01c43bf0] [c000000000a8d4ec] sock_do_ioctl+0xbc/0x1b0 [c000201c01c43c60] [c000000000a8dfb8] sock_ioctl+0x258/0x4f0 [c000201c01c43d20] [c0000000004c9704] do_vfs_ioctl+0xd4/0xa70 [c000201c01c43de0] [c0000000004ca274] sys_ioctl+0xc4/0x160 [c000201c01c43e30] [c00000000000b388] system_call+0x5c/0x70 Instruction dump: 78aad182 54a806be 3920ffff 78a50664 794a1f24 7d294036 7d43502a 7d295039 4182001c 48000034 78a9d182 79291f24 <7d23482a> 2fa90000 409e0020 38a50040 To fix this, move the check for condition 2 after the check for condition 3, so that we are able to break out of the loop soon after iterating through all the CPUs in the @mask in the problem case. Use do..while() to achieve this. Fixes: 243e2511 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Reported-by:
Indira P. Joga <indira.priya@in.ibm.com> Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Hui Wang authored
commit 3f880949 upstream. This conexant codec isn't in the supported codec list yet, the hda generic driver can drive this codec well, but on a Lenovo machine with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI to make the leds work. After adding this codec to the list, the driver patch_conexant.c will apply THINKPAD_ACPI to this machine. Cc: stable@vger.kernel.org Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kai-Heng Feng authored
commit 70256b42 upstream. Commit 7b9584fa ("staging: line6: Move altsetting to properties") set a wrong altsetting for LINE6_PODHD500_1 during refactoring. Set the correct altsetting number to fix the issue. BugLink: https://bugs.launchpad.net/bugs/1790595 Fixes: 7b9584fa ("staging: line6: Move altsetting to properties") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ding Xiang authored
commit 607975b3 upstream. put_device will call ac97_codec_release to free ac97_codec_device and other resources, so remove the kfree and other redundant code. Fixes: 74426fbf ("ALSA: ac97: add an ac97 bus") Signed-off-by:
Ding Xiang <dingxiang@cmss.chinamobile.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kefeng Wang authored
commit 0c7d37f4 upstream. The base value in do_div() called by hpet_time_div() is truncated from unsigned long to uint32_t, resulting in a divide-by-zero exception. UBSAN: Undefined behaviour in ../drivers/char/hpet.c:572:2 division by zero CPU: 1 PID: 23682 Comm: syz-executor.3 Not tainted 4.4.184.x86_64+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 0000000000000000 b573382df1853d00 ffff8800a3287b98 ffffffff81ad7561 ffff8800a3287c00 ffffffff838b35b0 ffffffff838b3860 ffff8800a3287c20 0000000000000000 ffff8800a3287bb0 ffffffff81b8f25e ffffffff838b35a0 Call Trace: [<ffffffff81ad7561>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81ad7561>] dump_stack+0xc1/0x120 lib/dump_stack.c:51 [<ffffffff81b8f25e>] ubsan_epilogue+0x12/0x8d lib/ubsan.c:166 [<ffffffff81b900cb>] __ubsan_handle_divrem_overflow+0x282/0x2c8 lib/ubsan.c:262 [<ffffffff823560dd>] hpet_time_div drivers/char/hpet.c:572 [inline] [<ffffffff823560dd>] hpet_ioctl_common drivers/char/hpet.c:663 [inline] [<ffffffff823560dd>] hpet_ioctl_common.cold+0xa8/0xad drivers/char/hpet.c:577 [<ffffffff81e63d56>] hpet_ioctl+0xc6/0x180 drivers/char/hpet.c:676 [<ffffffff81711590>] vfs_ioctl fs/ioctl.c:43 [inline] [<ffffffff81711590>] file_ioctl fs/ioctl.c:470 [inline] [<ffffffff81711590>] do_vfs_ioctl+0x6e0/0xf70 fs/ioctl.c:605 [<ffffffff81711eb4>] SYSC_ioctl fs/ioctl.c:622 [inline] [<ffffffff81711eb4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:613 [<ffffffff82846003>] tracesys_phase2+0x90/0x95 The main C reproducer autogenerated by syzkaller, syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); memcpy((void*)0x20000100, "/dev/hpet\000", 10); syscall(__NR_openat, 0xffffffffffffff9c, 0x20000100, 0, 0); syscall(__NR_ioctl, r[0], 0x40086806, 0x40000000000000); Fix it by using div64_ul(). Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Zhang HongJun <zhanghongjun2@huawei.com> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190711132757.130092-1-wangkefeng.wang@huawei.comSigned-off-by:
-
Alexander Usyskin authored
commit 1be8624a upstream. Add Mule Creek Canyon (PCH) MEI device ids for Elkhart Lake (EHL) Platform. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190712095814.20746-1-tomas.winkler@intel.comSigned-off-by:
-
YueHaibing authored
commit 3d139703 upstream. If BITREVERSE is m and FPGA_MGR_ALTERA_PS_SPI is y, build fails: drivers/fpga/altera-ps-spi.o: In function `altera_ps_write': altera-ps-spi.c:(.text+0x4ec): undefined reference to `byte_rev_table' Select BITREVERSE to fix this. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: fcfe18f8 ("fpga-manager: altera-ps-spi: use bitrev8x4") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20190708071356.50928-1-yuehaibing@huawei.comSigned-off-by:
-
Hridya Valsaraju authored
commit 49ed9694 upstream. Currently, a transaction to context manager from its own process is prevented by checking if its binder_proc struct is the same as that of the sender. However, this would not catch cases where the process opens the binder device again and uses the new fd to send a transaction to the context manager. Reported-by: syzbot+8b3c354d33c4ac78bfad@syzkaller.appspotmail.com Signed-off-by:
Hridya Valsaraju <hridya@google.com> Acked-by:
Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190715191804.112933-1-hridya@google.comSigned-off-by:
-
Zhenzhong Duan authored
commit 517c3ba0 upstream. X86_HYPER_NATIVE isn't accurate for checking if running on native platform, e.g. CONFIG_HYPERVISOR_GUEST isn't set or "nopv" is enabled. Checking the CPU feature bit X86_FEATURE_HYPERVISOR to determine if it's running on native platform is more accurate. This still doesn't cover the platforms on which X86_FEATURE_HYPERVISOR is unsupported, e.g. VMware, but there is nothing which can be done about this scenario. Fixes: 8a4b06d3 ("x86/speculation/mds: Add sysfs reporting for MDS") Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1564022349-17338-1-git-send-email-zhenzhong.duan@oracle.comSigned-off-by:
-
Hans de Goede authored
commit d02f1aa3 upstream. Some Lenovo 2-in-1s with a detachable keyboard have a portrait screen but advertise a landscape resolution and pitch, resulting in a messed up display if the kernel tries to show anything on the efifb (because of the wrong pitch). Fix this by adding a new DMI match table for devices which need to have their width and height swapped. At first it was tried to use the existing table for overriding some of the efifb parameters, but some of the affected devices have variants with different LCD resolutions which will not work with hardcoded override values. Reference: https://bugzilla.redhat.com/show_bug.cgi?id=1730783Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Qu Wenruo authored
commit 42c16da6 upstream. As btrfs(5) specified: Note If nodatacow or nodatasum are enabled, compression is disabled. If NODATASUM or NODATACOW set, we should not compress the extent. Normally NODATACOW is detected properly in run_delalloc_range() so compression won't happen for NODATACOW. However for NODATASUM we don't have any check, and it can cause compressed extent without csum pretty easily, just by: mkfs.btrfs -f $dev mount $dev $mnt -o nodatasum touch $mnt/foobar mount -o remount,datasum,compress $mnt xfs_io -f -c "pwrite 0 128K" $mnt/foobar And in fact, we have a bug report about corrupted compressed extent without proper data checksum so even RAID1 can't recover the corruption. (https://bugzilla.kernel.org/show_bug.cgi?id=199707) Running compression without proper checksum could cause more damage when corruption happens, as compressed data could make the whole extent unreadable, so there is no need to allow compression for NODATACSUM. The fix will refactor the inode compression check into two parts: - inode_can_compress() As the hard requirement, checked at btrfs_run_delalloc_range(), so no compression will happen for NODATASUM inode at all. - inode_need_compress() As the soft requirement, checked at btrfs_run_delalloc_range() and compress_file_range(). Reported-by:
James Harvey <jamespharvey20@gmail.com> CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Ryan Kennedy authored
commit f3dccdaa upstream. The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787e. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset. Signed-off-by:
Ryan Kennedy <ryan5544@gmail.com> Fixes: e788787e ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume") Cc: stable <stable@vger.kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.comSigned-off-by:
-
Phong Tran authored
commit f90bf1ec upstream. syzboot reported that https://syzkaller.appspot.com/bug?extid=fd2bd7df88c606eea4ef There is not consitency parameter in cluste_id_get/put calling. In case of getting the id with result is failure, the wusbhc->cluster_id will not be updated and this can not be used for wusb_cluster_id_put(). Tested report https://groups.google.com/d/msg/syzkaller-bugs/0znZopp3-9k/oxOrhLkLEgAJ Reproduce and gdb got the details: 139 addr = wusb_cluster_id_get(); (gdb) n 140 if (addr == 0) (gdb) print addr $1 = 254 '\376' (gdb) n 142 result = __hwahc_set_cluster_id(hwahc, addr); (gdb) print result $2 = -71 (gdb) break wusb_cluster_id_put Breakpoint 3 at 0xffffffff836e3f20: file drivers/usb/wusbcore/wusbhc.c, line 384. (gdb) s Thread 2 hit Breakpoint 3, wusb_cluster_id_put (id=0 '\000') at drivers/usb/wusbcore/wusbhc.c:384 384 id = 0xff - id; (gdb) n 385 BUG_ON(id >= CLUSTER_IDS); (gdb) print id $3 = 255 '\377' Reported-by: syzbot+fd2bd7df88c606eea4ef@syzkaller.appspotmail.com Signed-off-by:
Phong Tran <tranmanphong@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190724020601.15257-1-tranmanphong@gmail.comSigned-off-by:
-
Arnd Bergmann authored
[ Upstream commit 68037aa7 ] The usage is now hidden in an #ifdef, so we need to move the variable itself in there as well to avoid this warning: kernel/locking/lockdep_proc.c:203:21: error: unused variable 'class' [-Werror,-Wunused-variable] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Konstantin Khlebnikov authored
[ Upstream commit 1e426fe2 ] This function is used by ptrace and proc files like /proc/pid/cmdline and /proc/pid/environ. Access_remote_vm never returns error codes, all errors are ignored and only size of successfully read data is returned. So, if current task was killed we'll simply return 0 (bytes read). Mmap_sem could be locked for a long time or forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. Link: http://lkml.kernel.org/r/156007494202.3335.16782303099589302087.stgit@buzzSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by:
Michal Koutný <mkoutny@suse.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Gushchin <guro@fb.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Yuyang Du authored
[ Upstream commit 68d41d8c ] The stats variable nr_unused_locks is incremented every time a new lock class is register and decremented when the lock is first used in __lock_acquire(). And after all, it is shown and checked in lockdep_stats. However, under configurations that either CONFIG_TRACE_IRQFLAGS or CONFIG_PROVE_LOCKING is not defined: The commit: 09180651 ("locking/lockdep: Consolidate lock usage bit initialization") missed marking the LOCK_USED flag at IRQ usage initialization because as mark_usage() is not called. And the commit: 886532ae ("locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING") further made mark_lock() not defined such that the LOCK_USED cannot be marked at all when the lock is first acquired. As a result, we fix this by not showing and checking the stats under such configurations for lockdep_stats. Reported-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Yuyang Du <duyuyang@gmail.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 8a713e7d ] Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. This function is also used for /proc/pid/smaps. Link: http://lkml.kernel.org/r/156007493160.3335.14447544314127417266.stgit@buzzSigned-off-by:
Roman Gushchin <guro@fb.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by:
-
Arnd Bergmann authored
[ Upstream commit 752c2ea2 ] The cudbg_collect_mem_region() and cudbg_read_fw_mem() both use several hundred kilobytes of kernel stack space. One gets inlined into the other, which causes the stack usage to be combined beyond the warning limit when building with clang: drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c:1057:12: error: stack frame size of 1244 bytes in function 'cudbg_collect_mem_region' [-Werror,-Wframe-larger-than=] Restructuring cudbg_collect_mem_region() lets clang do the same optimization that gcc does and reuse the stack slots as it can see that the large variables are never used together. A better fix might be to avoid using cudbg_meminfo on the stack altogether, but that requires a larger rewrite. Fixes: a1c69520 ("cxgb4: collect MC memory dump") Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit cd9e2bb8 ] Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. It seems ->d_revalidate() could return any error (except ECHILD) to abort validation and pass error as result of lookup sequence. [akpm@linux-foundation.org: fix proc_map_files_lookup() return value, per Andrei] Link: http://lkml.kernel.org/r/156007493995.3335.9595044802115356911.stgit@buzzSigned-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit c4603801 ] Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. Replace the only unkillable mmap_sem lock in clear_refs_write(). Link: http://lkml.kernel.org/r/156007493826.3335.5424884725467456239.stgit@buzzSigned-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit ad80b932 ] Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. Link: http://lkml.kernel.org/r/156007493638.3335.4872164955523928492.stgit@buzzSigned-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit a26a9781 ] Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. Link: http://lkml.kernel.org/r/156007493429.3335.14666825072272692455.stgit@buzzSigned-off-by:
-
Jean-Philippe Brucker authored
[ Upstream commit 543bdb2d ] Make mmu_notifier_register() safer by issuing a memory barrier before registering a new notifier. This fixes a theoretical bug on weakly ordered CPUs. For example, take this simplified use of notifiers by a driver: my_struct->mn.ops = &my_ops; /* (1) */ mmu_notifier_register(&my_struct->mn, mm) ... hlist_add_head(&mn->hlist, &mm->mmu_notifiers); /* (2) */ ... Once mmu_notifier_register() releases the mm locks, another thread can invalidate a range: mmu_notifier_invalidate_range() ... hlist_for_each_entry_rcu(mn, &mm->mmu_notifiers, hlist) { if (mn->ops->invalidate_range) The read side relies on the data dependency between mn and ops to ensure that the pointer is properly initialized. But the write side doesn't have any dependency between (1) and (2), so they could be reordered and the readers could dereference an invalid mn->ops. mmu_notifier_register() does take all the mm locks before adding to the hlist, but those have acquire semantics which isn't sufficient. By calling hlist_add_head_rcu() instead of hlist_add_head() we update the hlist using a store-release, ensuring that readers see prior initialization of my_struct. This situation is better illustated by litmus test MP+onceassign+derefonce. Link: http://lkml.kernel.org/r/20190502133532.24981-1-jean-philippe.brucker@arm.com Fixes: cddb8a5c ("mmu-notifiers: core") Signed-off-by:
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Shakeel Butt authored
[ Upstream commit ec165450 ] Commit d46eb14b ("fs: fsnotify: account fsnotify metadata to kmemcg") added remote memcg charging for fanotify and inotify event objects. The aim was to charge the memory to the listener who is interested in the events but without triggering the OOM killer. Otherwise there would be security concerns for the listener. At the time, oom-kill trigger was not in the charging path. A parallel work added the oom-kill back to charging path i.e. commit 29ef680a ("memcg, oom: move out_of_memory back to the charge path"). So to not trigger oom-killer in the remote memcg, explicitly add __GFP_RETRY_MAYFAIL to the fanotigy and inotify event allocations. Link: http://lkml.kernel.org/r/20190514212259.156585-2-shakeelb@google.comSigned-off-by:
Shakeel Butt <shakeelb@google.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Amir Goldstein <amir73il@gmail.com> Signed-off-by:
-
Andy Lutomirski authored
[ Upstream commit b5d1c39f ] If we end up without a PGD or PUD entry backing the gate area, don't BUG -- just fail gracefully. It's not entirely implausible that this could happen some day on x86. It doesn't right now even with an execute-only emulated vsyscall page because the fixmap shares the PUD, but the core mm code shouldn't rely on that particular detail to avoid OOPSing. Link: http://lkml.kernel.org/r/a1d9f4efb75b9d464e59fd6af00104b21c58f6f7.1561610798.git.luto@kernel.orgSigned-off-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
Guenter Roeck authored
[ Upstream commit 790c7369 ] Several mips builds generate the following build warning. mm/gup.c:1788:13: warning: 'undo_dev_pagemap' defined but not used The function is declared unconditionally but only called from behind various ifdefs. Mark it __maybe_unused. Link: http://lkml.kernel.org/r/1562072523-22311-1-git-send-email-linux@roeck-us.netSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
-
Christoph Hellwig authored
[ Upstream commit f053cbd4 ] Fix the callback 9p passes to read_cache_page to actually have the proper type expected. Casting around function pointers can easily hide typing bugs, and defeats control flow protection. Link: http://lkml.kernel.org/r/20190520055731.24538-5-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Dmitry Vyukov authored
[ Upstream commit 6ef90569 ] in_softirq() is a wrong predicate to check if we are in a softirq context. It also returns true if we have BH disabled, so objects are falsely stamped with "softirq" comm. The correct predicate is in_serving_softirq(). If user does cat from /sys/kernel/debug/kmemleak previously they would see this, which is clearly wrong, this is system call context (see the comm): unreferenced object 0xffff88805bd661c0 (size 64): comm "softirq", pid 0, jiffies 4294942959 (age 12.400s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 ff ff ff ff 00 00 00 00 ................ 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace: [<0000000007dcb30c>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<0000000007dcb30c>] slab_post_alloc_hook mm/slab.h:439 [inline] [<0000000007dcb30c>] slab_alloc mm/slab.c:3326 [inline] [<0000000007dcb30c>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553 [<00000000969722b7>] kmalloc include/linux/slab.h:547 [inline] [<00000000969722b7>] kzalloc include/linux/slab.h:742 [inline] [<00000000969722b7>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline] [<00000000969722b7>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085 [<00000000a4134b5f>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475 [<00000000d20248ad>] do_ip_setsockopt.isra.0+0x19fe/0x1c00 net/ipv4/ip_sockglue.c:957 [<000000003d367be7>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246 [<000000003c7c76af>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616 [<000000000c1aeb23>] sock_common_setsockopt+0x3e/0x50 net/core/sock.c:3130 [<000000000157b92b>] __sys_setsockopt+0x9e/0x120 net/socket.c:2078 [<00000000a9f3d058>] __do_sys_setsockopt net/socket.c:2089 [inline] [<00000000a9f3d058>] __se_sys_setsockopt net/socket.c:2086 [inline] [<00000000a9f3d058>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086 [<000000001b8da885>] do_syscall_64+0x7c/0x1a0 arch/x86/entry/common.c:301 [<00000000ba770c62>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 now they will see this: unreferenced object 0xffff88805413c800 (size 64): comm "syz-executor.4", pid 8960, jiffies 4294994003 (age 14.350s) hex dump (first 32 bytes): 00 7a 8a 57 80 88 ff ff e0 00 00 01 00 00 00 00 .z.W............ 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace: [<00000000c5d3be64>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<00000000c5d3be64>] slab_post_alloc_hook mm/slab.h:439 [inline] [<00000000c5d3be64>] slab_alloc mm/slab.c:3326 [inline] [<00000000c5d3be64>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553 [<0000000023865be2>] kmalloc include/linux/slab.h:547 [inline] [<0000000023865be2>] kzalloc include/linux/slab.h:742 [inline] [<0000000023865be2>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline] [<0000000023865be2>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085 [<000000003029a9d4>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475 [<00000000ccd0a87c>] do_ip_setsockopt.isra.0+0x19fe/0x1c00 net/ipv4/ip_sockglue.c:957 [<00000000a85a3785>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246 [<00000000ec13c18d>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616 [<0000000052d748e3>] sock_common_setsockopt+0x3e/0x50 net/core/sock.c:3130 [<00000000512f1014>] __sys_setsockopt+0x9e/0x120 net/socket.c:2078 [<00000000181758bc>] __do_sys_setsockopt net/socket.c:2089 [inline] [<00000000181758bc>] __se_sys_setsockopt net/socket.c:2086 [inline] [<00000000181758bc>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086 [<00000000d4b73623>] do_syscall_64+0x7c/0x1a0 arch/x86/entry/common.c:301 [<00000000c1098bec>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Link: http://lkml.kernel.org/r/20190517171507.96046-1-dvyukov@gmail.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Sam Ravnborg authored
[ Upstream commit 733f0025 ] When building drm/exynos for sh, as part of an allmodconfig build, the following warning triggered: exynos7_drm_decon.c: In function `decon_remove': exynos7_drm_decon.c:769:24: warning: unused variable `ctx' struct decon_context *ctx = dev_get_drvdata(&pdev->dev); The ctx variable is only used as argument to iounmap(). In sh - allmodconfig CONFIG_MMU is not defined so it ended up in: \#define __iounmap(addr) do { } while (0) \#define iounmap __iounmap Fix the warning by introducing a static inline function for iounmap. This is similar to several other architectures. Link: http://lkml.kernel.org/r/20190622114208.24427-1-sam@ravnborg.orgSigned-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit e7bf90e5 ] In bio_integrity_prep(), a kernel buffer is allocated through kmalloc() to hold integrity metadata. Later on, the buffer will be attached to the bio structure through bio_integrity_add_page(), which returns the number of bytes of integrity metadata attached. Due to unexpected situations, bio_integrity_add_page() may return 0. As a result, bio_integrity_prep() needs to be terminated with 'false' returned to indicate this error. However, the allocated kernel buffer is not freed on this execution path, leading to a memory leak. To fix this issue, free the allocated buffer before returning from bio_integrity_prep(). Reviewed-by:
Ming Lei <ming.lei@redhat.com> Acked-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Oliver O'Halloran authored
[ Upstream commit 33439620 ] In commit 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap space") support for using hugepages in the vmalloc and ioremap areas was enabled for radix. Unfortunately this broke EEH MMIO error checking. Detection works by inserting a hook which checks the results of the ioreadXX() set of functions. When a read returns a 0xFFs response we need to check for an error which we do by mapping the (virtual) MMIO address back to a physical address, then mapping physical address to a PCI device via an interval tree. When translating virt -> phys we currently assume the ioremap space is only populated by PAGE_SIZE mappings. If a hugepage mapping is found we emit a WARN_ON(), but otherwise handles the check as though a normal page was found. In pathalogical cases such as copying a buffer containing a lot of 0xFFs from BAR memory this can result in the system not booting because it's too busy printing WARN_ON()s. There's no real reason to assume huge pages can't be present and we're prefectly capable of handling them, so do that. Fixes: 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap space") Reported-by:
Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Tested-by:
-
David Windsor authored
[ Upstream commit b355516f ] If the DLM lowcomms stack is shut down before any DLM traffic can be generated, flush_workqueue() and destroy_workqueue() can be called on empty send and/or recv workqueues. Insert guard conditionals to only call flush_workqueue() and destroy_workqueue() on workqueues that are not NULL. Signed-off-by:
David Windsor <dwindsor@redhat.com> Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
